Attachment 177001 Details for Bug 253634 – dmesg output of the Dom0 host

dmesg output of the Dom0 host

dmesg.txt (text/plain), 25.71 KB, created by Gurhan Ozen on 2007-08-28 16:20:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gurhan Ozen

Created: 2007-08-28 16:20:47 UTC

Size: 25.71 KB

patch

obsolete

>Linux version 2.6.18-43.el5xen (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Tue Aug 21 18:20:32 EDT 2007
>BIOS-provided physical RAM map:
> Xen: 0000000000000000 - 00000000f5760000 (usable)
>3199MB HIGHMEM available.
>727MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 1005408
>  DMA zone: 186366 pages, LIFO batch:31
>  HighMem zone: 819042 pages, LIFO batch:31
>found SMP MP-table at 000f5900
>DMI present.
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f58d0
>ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0xbff636a7
>ACPI: FADT (v001 INTEL  TUMWATER 0x06040000 PTL  0x00000003) @ 0xbff68e10
>ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0xbff68e84
>ACPI: MCFG (v001 PTLTD    MCFG   0x06040000  LTP 0x00000000) @ 0xbff68f4c
>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0xbff68f88
>ACPI: SPCR (v001 PTLTD  $UCRTBL$ 0x06040000 PTL  0x00000001) @ 0xbff68fb0
>ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050228) @ 0xbff636e3
>ACPI: DSDT (v001  Intel BLAKFORD 0x06040000 MSFT 0x0100000e) @ 0x00000000
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
>IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 2 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Built 1 zonelists.  Total pages: 1005408
>Kernel command line: ro root=LABEL=/1 rhgb quiet
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0727000 soft=c0707000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Xen reported: 2400.082 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Software IO TLB enabled: 
> Aperture:     64 megabytes
> Kernel range: 0x00000000c33c6000 - 0x00000000c73c6000
>vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000
>Memory: 3899084k/4021632k available (2049k kernel code, 113264k reserved, 844k data, 168k init, 3276168k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 6002.97 BogoMIPS (lpj=12005945)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebd3f1 20000000 00000000 00000000 0004e3bd 00000000 00000001
>CPU: After vendor identify, caps: bfebd3f1 20000000 00000000 00000000 0004e3bd 00000000 00000001
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: After all inits, caps: bfebd3f1 20000000 00000000 00000940 0004e3bd 00000000 00000001
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU 1 irqstacks, hard=c0728000 soft=c0708000
>CPU 2 irqstacks, hard=c0729000 soft=c0709000
>CPU 3 irqstacks, hard=c072a000 soft=c070a000
>CPU 4 irqstacks, hard=c072b000 soft=c070b000
>CPU 5 irqstacks, hard=c072c000 soft=c070c000
>CPU 6 irqstacks, hard=c072d000 soft=c070d000
>CPU 7 irqstacks, hard=c072e000 soft=c070e000
>ENABLING IO-APIC IRQs
>SMP alternatives: switching to SMP code
>Initializing CPU#1
>Initializing CPU#2
>Initializing CPU#3
>Initializing CPU#4
>Initializing CPU#5
>Initializing CPU#6
>Brought up 8 CPUs
>sizeof(vma)=88 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=136 bytes
>Initializing CPU#7
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>migration_cost=11447
>checking if image is initramfs... it is
>Freeing initrd memory: 5433k freed
>Grant table initialized
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>Setting up standard PCI resources
>Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>PCI: PXH quirk detected, disabling MSI for SHPC device
>PCI: PXH quirk detected, disabling MSI for SHPC device
>Boot video device is 0000:0b:01.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD0.PXH0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD0.PXH1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMF3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *9
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>xen_mem: Initialising balloon driver.
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:03:00.0
>  IO window: 2000-2fff
>  MEM window: c8200000-c82fffff
>  PREFETCH window: c2000000-c20fffff
>PCI: Bridge: 0000:03:00.2
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:02:00.0
>  IO window: 2000-2fff
>  MEM window: c8200000-c82fffff
>  PREFETCH window: c2000000-c20fffff
>PCI: Bridge: 0000:02:02.0
>  IO window: 3000-3fff
>  MEM window: c8300000-c83fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:01:00.0
>  IO window: 2000-3fff
>  MEM window: c8200000-c83fffff
>  PREFETCH window: c2000000-c20fffff
>PCI: Bridge: 0000:01:00.3
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:02.0
>  IO window: 2000-3fff
>  MEM window: c8100000-c83fffff
>  PREFETCH window: c2000000-c20fffff
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: 4000-4fff
>  MEM window: c8400000-c84fffff
>  PREFETCH window: d0000000-d7ffffff
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>PCI: Setting latency timer of device 0000:03:00.2 to 64
>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:02:02.0 to 64
>PCI: Setting latency timer of device 0000:01:00.3 to 64
>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x38 set to 0x1
>audit: initializing netlink socket (disabled)
>audit(1187971534.028:1): initialized
>highmem bounce pool size: 64 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key F6E6EE9DFB7A1C32
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>Allocate Port Service[0000:01:00.0:pcie10]
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:02:00.0:pcie20]
>PCI: Setting latency timer of device 0000:02:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:02:02.0:pcie20]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Processor [CPU2] (supports 8 throttling states)
>ACPI: Processor [CPU3] (supports 8 throttling states)
>ACPI: Processor [CPU4] (supports 8 throttling states)
>ACPI: Processor [CPU5] (supports 8 throttling states)
>ACPI: Processor [CPU6] (supports 8 throttling states)
>ACPI: Processor [CPU7] (supports 8 throttling states)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Xen virtual console successfully installed as ttyS0
>Event-channel device installed.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ide0: I/O resource 0x1F0-0x1F7 not free.
>ide0: ports already in use, skipping probe
>Probing IDE interface ide1...
>hdd: LITE-ON COMBO SOHC-5236V, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>Freeing unused kernel memory: 168k freed
>Write protecting the kernel read-only data: 360k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 17, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 17 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 18, io mem 0xc8000000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.2: version 2.11
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: 0x170 IDE port busy
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011870 irq 14
>ata2: DUMMY
>ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
>ata1.00: ATA-7: WDC WD1200JS-00MHB1, 10.02E01, max UDMA/133
>ata1.00: 234441648 sectors, multi 16: LBA48 
>ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
>ata1.00: configured for UDMA/133
>  Vendor: ATA       Model: WDC WD1200JS-00M  Rev: 10.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: Attached scsi disk sda
>ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>scsi2 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
>        <Adaptec AIC7902 Ultra320 SCSI adapter>
>        aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
>
>  Vendor: SUPER     Model: GEM359 REV001     Rev: 1.09
>  Type:   Processor                          ANSI SCSI revision: 02
> target2:0:8: asynchronous
> target2:0:8: Beginning Domain Validation
> target2:0:8: Ending Domain Validation
>ACPI: PCI Interrupt 0000:04:02.1[B] -> GSI 17 (level, low) -> IRQ 18
>scsi3 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
>        <Adaptec AIC7902 Ultra320 SCSI adapter>
>        aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
>
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1187971577.282:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1636 types, 208 bools, 1 sens, 1024 cats
>security:  61 classes, 55608 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda6, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1187971577.598:3): policy loaded auid=4294967295
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>8250_pnp: Unknown symbol serial8250_unregister_port
>8250_pnp: Unknown symbol serial8250_register_port
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:06:00.0 to 64
>hdd: ATAPI 52X DVD-ROM CD-R/RW drive, 1536kB Cache
>Uniform CD-ROM driver Revision: 3.20
>input: PC Speaker as /class/input/input0
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>e1000: 0000:06:00.0: e1000_probe: (PCI Express:2.5Gb/s:32-bit) 00:30:48:30:5a:5a
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI Interrupt 0000:06:00.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:06:00.1 to 64
>8250_pnp: Unknown symbol serial8250_unregister_port
>8250_pnp: Unknown symbol serial8250_register_port
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>intel_rng: FWH not detected
>e1000: 0000:06:00.1: e1000_probe: (PCI Express:2.5Gb/s:32-bit) 00:30:48:30:5a:5b
>e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
>Floppy drive(s): fd0 is 1.44M
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>FDC 0 is a post-1991 82077
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 2:0:8:0: Attached scsi generic sg1 type 3
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda6, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>Adding 2096440k swap on /dev/sda5.  Priority:-1 extents:1 across:2096440k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
>e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
>e1000: eth0: e1000_watchdog_task: 10/100 speed: disabling TSO
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>Bridge firewalling registered
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
>device vif0.0 entered promiscuous mode
>xenbr0: port 1(vif0.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 1(vif0.0) entering forwarding state
>ADDRCONF(NETDEV_UP): peth0: link is not ready
>e1000: peth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
>e1000: peth0: e1000_watchdog_task: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
>device peth0 entered promiscuous mode
>xenbr0: port 2(peth0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 2(peth0) entering forwarding state
>virbr0: no IPv6 routers present
>eth0: no IPv6 routers present
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>device tap0 entered promiscuous mode
>xenbr0: port 3(tap0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 3(tap0) entering forwarding state
>device vif1.0 entered promiscuous mode
>ADDRCONF(NETDEV_UP): vif1.0: link is not ready
>loop: loaded (max 8 devices)
>tap0: no IPv6 routers present
>xenbr0: port 4(vif1.0) entering disabled state
>device vif1.0 left promiscuous mode
>xenbr0: port 4(vif1.0) entering disabled state
>xenbr0: port 3(tap0) entering disabled state
>device tap0 left promiscuous mode
>xenbr0: port 3(tap0) entering disabled state
>device tap0 entered promiscuous mode
>xenbr0: port 3(tap0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 3(tap0) entering forwarding state
>device vif2.0 entered promiscuous mode
>ADDRCONF(NETDEV_UP): vif2.0: link is not ready
>tap0: no IPv6 routers present
>xenbr0: port 4(vif2.0) entering disabled state
>device vif2.0 left promiscuous mode
>xenbr0: port 4(vif2.0) entering disabled state
>xenbr0: port 3(tap0) entering disabled state
>device tap0 left promiscuous mode
>xenbr0: port 3(tap0) entering disabled state
>device tap0 entered promiscuous mode
>xenbr0: port 3(tap0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 3(tap0) entering forwarding state
>device vif3.0 entered promiscuous mode
>ADDRCONF(NETDEV_UP): vif3.0: link is not ready
>tap0: no IPv6 routers present
>xenbr0: port 4(vif3.0) entering disabled state
>device vif3.0 left promiscuous mode
>xenbr0: port 4(vif3.0) entering disabled state
>xenbr0: port 3(tap0) entering disabled state
>device tap0 left promiscuous mode
>xenbr0: port 3(tap0) entering disabled state
>device tap0 entered promiscuous mode
>xenbr0: port 3(tap0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 3(tap0) entering forwarding state
>device vif4.0 entered promiscuous mode
>ADDRCONF(NETDEV_UP): vif4.0: link is not ready
>tap0: no IPv6 routers present
>xenbr0: port 4(vif4.0) entering disabled state
>device vif4.0 left promiscuous mode
>xenbr0: port 4(vif4.0) entering disabled state
>xenbr0: port 3(tap0) entering disabled state
>device tap0 left promiscuous mode
>xenbr0: port 3(tap0) entering disabled state
>device tap0 entered promiscuous mode
>xenbr0: port 3(tap0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 3(tap0) entering forwarding state
>device vif5.0 entered promiscuous mode
>ADDRCONF(NETDEV_UP): vif5.0: link is not ready
>tap0: no IPv6 routers present
>xenbr0: port 4(vif5.0) entering disabled state
>device vif5.0 left promiscuous mode
>xenbr0: port 4(vif5.0) entering disabled state
>xenbr0: port 3(tap0) entering disabled state
>device tap0 left promiscuous mode
>xenbr0: port 3(tap0) entering disabled state
>device tap0 entered promiscuous mode
>xenbr0: port 3(tap0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 3(tap0) entering forwarding state
>device vif6.0 entered promiscuous mode
>ADDRCONF(NETDEV_UP): vif6.0: link is not ready
>tap0: no IPv6 routers present

Actions: View

Attachments on bug 253634: 172419 | 172455 | 177001 | 177021 | 177041 | 409071 | 409073 | 409074