Attachment 179721 Details for Bug 265181 – /root/scsconfig.log text file

/root/scsconfig.log text file

scsconfig.log (text/plain), 62.16 KB, created by mark bokil on 2007-08-29 20:40:28 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: mark bokil

Created: 2007-08-29 20:40:28 UTC

Size: 62.16 KB

patch

obsolete

>------- System Config Soundcard Log --------
>Wed Aug 29 16:24:21 EDT 2007
>
>------- lspci --------
>00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
>00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
>00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
>00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
>00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16)
>00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16)
>00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
>00:0b.0 USB Controller: NEC Corporation USB (rev 43)
>00:0b.1 USB Controller: NEC Corporation USB (rev 43)
>00:0b.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
>00:0d.0 Multimedia audio controller: Creative Labs SB Audigy LS
>00:0f.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
>01:00.0 VGA compatible controller: nVidia Corporation NV44A [GeForce 6200] (rev a1)
>
>------- lspci -vn --------
>00:00.0 0600: 1106:0305 (rev 03)
>	Subsystem: 147b:a401
>	Flags: bus master, medium devsel, latency 8
>	Memory at e0000000 (32-bit, prefetchable) [size=128M]
>	Capabilities: [a0] AGP version 2.0
>	Capabilities: [c0] Power Management version 2
>
>00:01.0 0604: 1106:8305 (prog-if 00 [Normal decode])
>	Flags: bus master, 66MHz, medium devsel, latency 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	Memory behind bridge: e8000000-eaffffff
>	Prefetchable memory behind bridge: d0000000-dfffffff
>	Capabilities: [80] Power Management version 2
>
>00:07.0 0601: 1106:0686 (rev 40)
>	Subsystem: 147b:0000
>	Flags: bus master, stepping, medium devsel, latency 0
>	Capabilities: [c0] Power Management version 2
>
>00:07.1 0101: 1106:0571 (rev 06) (prog-if 8a [Master SecP PriP])
>	Subsystem: 1106:0571
>	Flags: bus master, medium devsel, latency 32
>	[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
>	[virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
>	[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
>	[virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
>	I/O ports at d000 [size=16]
>	Capabilities: [c0] Power Management version 2
>
>00:07.2 0c03: 1106:3038 (rev 16) (prog-if 00 [UHCI])
>	Subsystem: 0925:1234
>	Flags: bus master, medium devsel, latency 32, IRQ 12
>	I/O ports at d400 [size=32]
>	Capabilities: [80] Power Management version 2
>
>00:07.3 0c03: 1106:3038 (rev 16) (prog-if 00 [UHCI])
>	Subsystem: 0925:1234
>	Flags: bus master, medium devsel, latency 32, IRQ 12
>	I/O ports at d800 [size=32]
>	Capabilities: [80] Power Management version 2
>
>00:07.4 0680: 1106:3057 (rev 40)
>	Subsystem: 1106:3057
>	Flags: medium devsel, IRQ 5
>	Capabilities: [68] Power Management version 2
>
>00:0b.0 0c03: 1033:0035 (rev 43) (prog-if 10 [OHCI])
>	Subsystem: 1799:0001
>	Flags: bus master, medium devsel, latency 32, IRQ 12
>	Memory at eb000000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [40] Power Management version 2
>
>00:0b.1 0c03: 1033:0035 (rev 43) (prog-if 10 [OHCI])
>	Subsystem: 1799:0001
>	Flags: bus master, medium devsel, latency 32, IRQ 10
>	Memory at eb001000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [40] Power Management version 2
>
>00:0b.2 0c03: 1033:00e0 (rev 04) (prog-if 20 [EHCI])
>	Subsystem: 1799:0002
>	Flags: bus master, medium devsel, latency 32, IRQ 11
>	Memory at eb002000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [40] Power Management version 2
>
>00:0d.0 0401: 1102:0007
>	Subsystem: 1102:100a
>	Flags: bus master, medium devsel, latency 32, IRQ 11
>	I/O ports at dc00 [size=32]
>	Capabilities: [dc] Power Management version 2
>
>00:0f.0 0200: 1186:1300 (rev 10)
>	Subsystem: 1186:1301
>	Flags: bus master, medium devsel, latency 32, IRQ 11
>	I/O ports at e000 [size=256]
>	Memory at eb003000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [50] Power Management version 2
>
>01:00.0 0300: 10de:0221 (rev a1) (prog-if 00 [VGA])
>	Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 10
>	Memory at e8000000 (32-bit, non-prefetchable) [size=16M]
>	Memory at d0000000 (32-bit, prefetchable) [size=256M]
>	Memory at e9000000 (32-bit, non-prefetchable) [size=16M]
>	[virtual] Expansion ROM at ea000000 [disabled] [size=128K]
>	Capabilities: [60] Power Management version 2
>	Capabilities: [44] AGP version 3.0
>
>------- lsmod --------
>Module                  Size  Used by
>lp                     16105  0 
>ppdev                  12741  0 
>autofs4                24773  2 
>hidp                   26688  2 
>rfcomm                 44377  0 
>l2cap                  30401  10 hidp,rfcomm
>bluetooth              57893  5 hidp,rfcomm,l2cap
>sunrpc                161981  1 
>xt_limit                6721  8 
>iptable_mangle          6977  0 
>ipt_LOG                10049  8 
>ipt_MASQUERADE          7745  0 
>nf_nat                 22381  1 ipt_MASQUERADE
>ipt_TOS                 6337  0 
>ipt_REJECT              8641  1 
>nf_conntrack_irc       11097  0 
>nf_conntrack_ftp       13761  0 
>nf_conntrack_ipv4      15049  7 
>xt_state                6593  6 
>nf_conntrack           63049  6 ipt_MASQUERADE,nf_nat,nf_conntrack_irc,nf_conntrack_ftp,nf_conntrack_ipv4,xt_state
>nfnetlink               9945  3 nf_nat,nf_conntrack_ipv4,nf_conntrack
>iptable_filter          7105  1 
>ip_tables              16517  2 iptable_mangle,iptable_filter
>xt_tcpudp               7233  16 
>ip6t_REJECT             9537  2 
>ip6table_filter         6849  1 
>ip6_tables             17668  1 ip6table_filter
>x_tables               18629  10 xt_limit,ipt_LOG,ipt_MASQUERADE,ipt_TOS,ipt_REJECT,xt_state,ip_tables,xt_tcpudp,ip6t_REJECT,ip6_tables
>dm_multipath           21961  0 
>video                  21065  0 
>sbs                    22729  0 
>button                 12113  0 
>dock                   13921  0 
>battery                14149  0 
>ac                      9285  0 
>ipv6                  277957  27 ip6t_REJECT
>snd_ca0106             35553  5 
>snd_rawmidi            26817  1 snd_ca0106
>snd_ac97_codec         96613  1 snd_ca0106
>snd_seq_dummy           7877  0 
>snd_seq_oss            33473  0 
>snd_seq_midi_event     11073  1 snd_seq_oss
>snd_seq                50609  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
>snd_seq_device         11981  4 snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq
>snd_pcm_oss            43457  0 
>snd_mixer_oss          19521  1 snd_pcm_oss
>snd_pcm                74949  5 snd_ca0106,snd_ac97_codec,snd_pcm_oss
>via686a                19145  0 
>hwmon                   7365  1 via686a
>snd_timer              24901  2 snd_seq,snd_pcm
>8139too                29249  0 
>snd                    53317  18 snd_ca0106,snd_rawmidi,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
>i2c_isa                 8257  1 via686a
>soundcore              11681  1 snd
>rtc_cmos               12001  0 
>mii                     9409  1 8139too
>i2c_viapro             12373  0 
>ac97_bus                6465  1 snd_ac97_codec
>usblp                  17473  0 
>snd_page_alloc         13769  2 snd_ca0106,snd_pcm
>parport_pc             30821  1 
>i2c_core               27841  3 via686a,i2c_isa,i2c_viapro
>parport                38281  3 lp,ppdev,parport_pc
>floppy                 58661  0 
>sr_mod                 20837  0 
>cdrom                  37089  1 sr_mod
>sg                     37469  0 
>dm_snapshot            20709  0 
>dm_zero                 6209  0 
>dm_mirror              25153  0 
>dm_mod                 56833  11 dm_multipath,dm_snapshot,dm_zero,dm_mirror
>usb_storage            76673  0 
>ata_generic            11589  0 
>pata_via               15813  2 
>libata                119985  2 ata_generic,pata_via
>sd_mod                 31297  3 
>scsi_mod              140749  5 sr_mod,sg,usb_storage,libata,sd_mod
>ext3                  125513  3 
>jbd                    59881  1 ext3
>mbcache                12485  1 ext3
>ehci_hcd               35405  0 
>ohci_hcd               23877  0 
>uhci_hcd               27089  0 
>
>------- /etc/modprobe.conf --------
>alias eth0 8139too
>alias scsi_hostadapter pata_via
>alias scsi_hostadapter1 usb-storage
>options snd cards_limit=8
>alias snd-card-1 snd-ca0106
>options snd-ca0106 index=1
>alias snd-card-7 snd-usb-audio
>options snd-usb-audio index=7
>
>------- /etc/asound.conf --------
>#Generated by system-config-soundcard
>#If you edit this file, don't run system-config-soundcard,
>#all your changes here could be lost.
>#SWCONF
>#DEV 0
>defaults.pcm.card 1 
>defaults.pcm.device 0 
>defaults.ctl.card 1 
>
>------- aplay -l --------
>**** List of PLAYBACK Hardware Devices ****
>card 1: CA0106 [CA0106], device 0: ca0106 [CA0106]
>  Subdevices: 0/1
>  Subdevice #0: subdevice #0
>card 1: CA0106 [CA0106], device 1: ca0106 [CA0106]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
>card 1: CA0106 [CA0106], device 2: ca0106 [CA0106]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
>card 1: CA0106 [CA0106], device 3: ca0106 [CA0106]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
>
>------- amixer --------
>Simple mixer control 'Line in',0
>  Capabilities: cvolume
>  Capture channels: Front Left - Front Right
>  Limits: Capture 0 - 255
>  Front Left: Capture 93 [36%] [-57.00dB]
>  Front Right: Capture 93 [36%] [-57.00dB]
>Simple mixer control 'Mic',0
>  Capabilities: cvolume
>  Capture channels: Front Left - Front Right
>  Limits: Capture 0 - 255
>  Front Left: Capture 0 [0%] [-99999.99dB]
>  Front Right: Capture 0 [0%] [-99999.99dB]
>Simple mixer control 'Phone',0
>  Capabilities: cvolume
>  Capture channels: Front Left - Front Right
>  Limits: Capture 0 - 255
>  Front Left: Capture 207 [81%] [0.00dB]
>  Front Right: Capture 207 [81%] [0.00dB]
>Simple mixer control 'IEC958',0
>  Capabilities: pswitch pswitch-joined
>  Playback channels: Mono
>  Mono: Playback [on]
>Simple mixer control 'IEC958 Center/LFE',0
>  Capabilities: pvolume
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 255
>  Mono:
>  Front Left: Playback 35 [14%] [-43.00dB]
>  Front Right: Playback 35 [14%] [-43.00dB]
>Simple mixer control 'IEC958 Front',0
>  Capabilities: pvolume
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 255
>  Mono:
>  Front Left: Playback 39 [15%] [-42.00dB]
>  Front Right: Playback 39 [15%] [-42.00dB]
>Simple mixer control 'IEC958 Rear',0
>  Capabilities: pvolume
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 255
>  Mono:
>  Front Left: Playback 0 [0%] [-99999.99dB]
>  Front Right: Playback 0 [0%] [-99999.99dB]
>Simple mixer control 'IEC958 Unknown',0
>  Capabilities: pvolume
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 255
>  Mono:
>  Front Left: Playback 45 [18%] [-40.50dB]
>  Front Right: Playback 45 [18%] [-40.50dB]
>Simple mixer control 'Aux',0
>  Capabilities: cvolume
>  Capture channels: Front Left - Front Right
>  Limits: Capture 0 - 255
>  Front Left: Capture 207 [81%] [0.00dB]
>  Front Right: Capture 207 [81%] [0.00dB]
>Simple mixer control 'Analog Center/LFE',0
>  Capabilities: pvolume
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 255
>  Mono:
>  Front Left: Playback 0 [0%] [-99999.99dB]
>  Front Right: Playback 0 [0%] [-99999.99dB]
>Simple mixer control 'Analog Front',0
>  Capabilities: pvolume
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 255
>  Mono:
>  Front Left: Playback 191 [75%] [-4.00dB]
>  Front Right: Playback 191 [75%] [-4.00dB]
>Simple mixer control 'Analog Rear',0
>  Capabilities: pvolume
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 255
>  Mono:
>  Front Left: Playback 191 [75%] [-4.00dB]
>  Front Right: Playback 191 [75%] [-4.00dB]
>Simple mixer control 'Analog Side',0
>  Capabilities: pvolume
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 255
>  Mono:
>  Front Left: Playback 0 [0%] [-99999.99dB]
>  Front Right: Playback 0 [0%] [-99999.99dB]
>Simple mixer control 'Analog Source',0
>  Capabilities: cenum
>  Items: 'Phone' 'Mic' 'Line in' 'Aux'
>  Item0: 'Line in'
>Simple mixer control 'CAPTURE feedback',0
>  Capabilities: pvolume
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 255
>  Mono:
>  Front Left: Playback 0 [0%] [-99999.99dB]
>  Front Right: Playback 0 [0%] [-99999.99dB]
>Simple mixer control 'Digital Source',0
>  Capabilities: cenum
>  Items: 'IEC958 out' 'i2s mixer out' 'IEC958 in' 'i2s in' 'AC97 in' 'SRC out'
>  Item0: 'i2s in'
>Simple mixer control 'Shared Mic/Line in',0
>  Capabilities: enum
>  Items: 'Line in' 'Mic in'
>  Item0: 'Line in'
>
>------- /proc/asound/version --------
>Advanced Linux Sound Architecture Driver Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
>
>------- rpm -q alsa-lib --------
>alsa-lib-1.0.14-3.fc7
>
>------- rpm -q alsa-utils --------
>alsa-utils-1.0.14-1.fc7
>
>------- /proc/asound/modules --------
> 1 snd_ca0106
>
>------- /proc/asound/pcm --------
>01-03: ca0106 : CA0106 : playback 1 : capture 1
>01-02: ca0106 : CA0106 : playback 1 : capture 1
>01-01: ca0106 : CA0106 : playback 1 : capture 1
>01-00: ca0106 : CA0106 : playback 1 : capture 1
>
>------- /etc/sysconfig/hwconf --------
>-
>class: OTHER
>bus: PCI
>detached: 0
>driver: via686a
>desc: "VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]"
>vendorId: 1106
>deviceId: 3057
>subVendorId: 1106
>subDeviceId: 3057
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  7
>pcifn:  4
>-
>class: OTHER
>bus: PCI
>detached: 0
>driver: parport_pc
>desc: "VIA Technologies, Inc. VT82C686 [Apollo Super South]"
>vendorId: 1106
>deviceId: 0686
>subVendorId: 147b
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  7
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]"
>vendorId: 1106
>deviceId: 8305
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  1
>pcifn:  0
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Chicony Saitek Eclipse Keyboard"
>usbclass: 3
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 1
>usblevel: 2
>usbport: 2
>usbdev: 4
>vendorId: 06a3
>deviceId: 8020
>usbmfr: Chicony
>usbprod: Saitek Eclipse Keyboard
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.22.4-65.fc7 ehci_hcd EHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 5
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.22.4-65.fc7 ehci_hcd
>usbprod: EHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.22.4-65.fc7 ohci_hcd OHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 3
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.22.4-65.fc7 ohci_hcd
>usbprod: OHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.22.4-65.fc7 ohci_hcd OHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 4
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.22.4-65.fc7 ohci_hcd
>usbprod: OHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.22.4-65.fc7 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 1
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.22.4-65.fc7 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.22.4-65.fc7 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 2
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.22.4-65.fc7 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0200"
>deviceId: PNP0200
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>driver: parport_pc
>desc: "PNP0400"
>deviceId: PNP0400
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0501"
>deviceId: PNP0501
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0501"
>deviceId: PNP0501
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0700"
>deviceId: PNP0700
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0800"
>deviceId: PNP0800
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0a03"
>deviceId: PNP0a03
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>driver: rtc-cmos
>desc: "PNP0b00"
>deviceId: PNP0b00
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c01"
>deviceId: PNP0c01
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c04"
>deviceId: PNP0c04
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Power Button (CM)"
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Power Button (FF)"
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Sleep Button (CM)"
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "USB Hub"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 3
>usblevel: 1
>usbport: 1
>usbdev: 2
>vendorId: 05e3
>deviceId: 0604
>usbprod: USB Hub
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Unknown USB device 0x3eb:0x3301"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 1
>usblevel: 1
>usbport: 0
>usbdev: 2
>vendorId: 03eb
>deviceId: 3301
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "VIA Technologies, Inc. VT8363/8365 [KT133/KM133]"
>vendorId: 1106
>deviceId: 0305
>subVendorId: 147b
>subDeviceId: a401
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  0
>pcifn:  0
>-
>class: NETWORK
>bus: PCI
>detached: 0
>device: eth0
>driver: 8139too
>desc: "D-Link System Inc RTL8139 Ethernet"
>network.hwaddr: 00:11:95:1d:d0:47
>vendorId: 1186
>deviceId: 1300
>subVendorId: 1186
>subDeviceId: 1301
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  f
>pcifn:  0
>-
>class: MOUSE
>bus: USB
>detached: 0
>device: input/mice
>driver: genericwheelusb
>desc: "Logitech USB Mouse"
>usbclass: 3
>usbsubclass: 1
>usbprotocol: 2
>usbbus: 1
>usblevel: 2
>usbport: 3
>usbdev: 5
>vendorId: 046d
>deviceId: c00c
>usbmfr: Logitech
>usbprod: USB Mouse
>-
>class: MOUSE
>bus: PSAUX
>detached: 0
>device: input/mice
>driver: generic3ps/2
>desc: "Macintosh mouse button emulation"
>-
>class: AUDIO
>bus: PCI
>detached: 0
>driver: snd-ca0106
>desc: "Creative Labs SB Audigy LS"
>vendorId: 1102
>deviceId: 0007
>subVendorId: 1102
>subDeviceId: 100a
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  d
>pcifn:  0
>-
>class: CDROM
>bus: SCSI
>detached: 0
>device: scd0
>desc: "HP DVD Writer 840x"
>host: 1
>id: 0
>channel: 0
>lun: 0
>-
>class: VIDEO
>bus: PCI
>detached: 0
>driver: nvidiafb
>desc: "nVidia Corporation NV44A [GeForce 6200]"
>video.xdriver: nv
>vendorId: 10de
>deviceId: 0221
>subVendorId: 0000
>subDeviceId: 02bb
>pciType: 1
>pcidom:    0
>pcibus:  1
>pcidev:  0
>pcifn:  0
>-
>class: FLOPPY
>bus: MISC
>detached: 1
>device: fd0
>desc: "3.5" 1.44MB floppy drive"
>-
>class: HD
>bus: USB
>detached: 0
>driver: usb-storage
>desc: "Memorex TD Classic 003B"
>usbclass: 8
>usbsubclass: 6
>usbprotocol: 80
>usbbus: 3
>usblevel: 2
>usbport: 1
>usbdev: 5
>vendorId: 12f7
>deviceId: 1d00
>usbmfr: Memorex
>usbprod: TD Classic 003B
>-
>class: HD
>bus: USB
>detached: 0
>driver: usb-storage
>desc: "Prolific Technology Inc. Mass Storage Device"
>usbclass: 8
>usbsubclass: 6
>usbprotocol: 80
>usbbus: 5
>usblevel: 1
>usbport: 1
>usbdev: 2
>vendorId: 067b
>deviceId: 2506
>usbmfr: Prolific Technology Inc.
>usbprod: Mass Storage Device
>-
>class: HD
>bus: SCSI
>detached: 0
>device: sda
>desc: "ATA IC35L060AVER07-0"
>host: 0
>id: 0
>channel: 0
>lun: 0
>-
>class: HD
>bus: SCSI
>detached: 0
>device: sdb
>desc: "FUJITSU MHM2200AT"
>host: 2
>id: 0
>channel: 0
>lun: 0
>-
>class: HD
>bus: SCSI
>detached: 0
>device: sdc
>desc: "Memorex TD Classic 003B"
>host: 3
>id: 0
>channel: 0
>lun: 0
>-
>class: PRINTER
>bus: USB
>detached: 0
>driver: usblp
>desc: "HP Deskjet 6500"
>usbclass: 7
>usbsubclass: 1
>usbprotocol: 2
>usbbus: 1
>usblevel: 2
>usbport: 1
>usbdev: 3
>vendorId: 03f0
>deviceId: 8204
>usbmfr: HP
>usbprod: Deskjet 6500
>-
>class: KEYBOARD
>bus: USB
>detached: 0
>driver: keybdev
>desc: "Chicony Saitek Eclipse Keyboard"
>usbclass: 3
>usbsubclass: 1
>usbprotocol: 1
>usbbus: 1
>usblevel: 2
>usbport: 2
>usbdev: 4
>vendorId: 06a3
>deviceId: 8020
>usbmfr: Chicony
>usbprod: Saitek Eclipse Keyboard
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ehci-hcd
>desc: "NEC Corporation USB 2.0"
>vendorId: 1033
>deviceId: 00e0
>subVendorId: 1799
>subDeviceId: 0002
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  b
>pcifn:  2
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ohci-hcd
>desc: "NEC Corporation USB"
>vendorId: 1033
>deviceId: 0035
>subVendorId: 1799
>subDeviceId: 0001
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  b
>pcifn:  1
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ohci-hcd
>desc: "NEC Corporation USB"
>vendorId: 1033
>deviceId: 0035
>subVendorId: 1799
>subDeviceId: 0001
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  b
>pcifn:  0
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller"
>vendorId: 1106
>deviceId: 3038
>subVendorId: 0925
>subDeviceId: 1234
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  7
>pcifn:  3
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller"
>vendorId: 1106
>deviceId: 3038
>subVendorId: 0925
>subDeviceId: 1234
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  7
>pcifn:  2
>-
>class: IDE
>bus: PCI
>detached: 0
>driver: ata_generic
>desc: "VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE"
>vendorId: 1106
>deviceId: 0571
>subVendorId: 1106
>subDeviceId: 0571
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  7
>pcifn:  1
>
>------- dmesg --------
>Linux version 2.6.22.4-65.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue Aug 21 22:36:56 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
> BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
> BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>767MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 196592) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   196592
>  HighMem    196592 ->   196592
>early_node_map[1] active PFN ranges
>    0:        0 ->   196592
>On node 0 totalpages: 196592
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1503 pages used for memmap
>  Normal zone: 190993 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F7900, 0014 (r0 VT8371)
>ACPI: RSDT 2FFF3000, 0028 (r1 VT8371 AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 2FFF3040, 0074 (r1 VT8371 AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 2FFF30C0, 24FD (r1 VT8371 AWRDACPI     1000 MSFT  100000C)
>ACPI: FACS 2FFF0000, 0040
>ACPI: PM-Timer IO Port: 0x4008
>Allocating PCI resources starting at 40000000 (gap: 30000000:cfff0000)
>Built 1 zonelists.  Total pages: 195057
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (0160e000)
>Enabling fast FPU save and restore... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0791000 soft=c0771000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1200.087 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 770896k/786368k available (2106k kernel code, 14860k reserved, 1114k data, 260k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf0800000 - 0xff7fe000   ( 239 MB)
>    lowmem  : 0xc0000000 - 0xefff0000   ( 767 MB)
>      .init : 0xc072b000 - 0xc076c000   ( 260 kB)
>      .data : 0xc060ea2e - 0xc0725504   (1114 kB)
>      .text : 0xc0400000 - 0xc060ea2e   (2106 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 2401.68 BogoMIPS (lpj=1200840)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU: After all inits, caps: 0183f1ff c1c7f9ff 00000000 00000420 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0020 (from 1c20)
>CPU0: AMD Athlon(tm) processor stepping 04
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1536 bytes
>Time: 18:56:55  Date: 07/29/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09
>PCI quirk: region 6000-607f claimed by vt82c686 HW-mon
>PCI quirk: region 5000-500f claimed by vt82c686 SMB
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>pnp: 00:00: iomem range 0xd0000-0xd3fff has been reserved
>pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: e8000000-eaffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 3527k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1188413815.749:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 38B1F6ECF739D0D
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Applying VIA southbridge workaround.
>PCI: VIA PCI bridge detected. Disabling DAC.
>PCI: Disabling Via external APIC routing
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 2 throttling states)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
>agpgart: AGP aperture is 128M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Marking TSC unstable due to: possible TSC halt in C2.
>Time: acpi_pm clocksource has been installed.
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Processor cpuid 644 not supported
>Using IPI No-Shortcut mode
>  Magic number: 3:991:949
>  hash matches device tty6
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 260k freed
>Write protecting the kernel read-only data: 862k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
>PCI: setting IRQ 12 as level-triggered
>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 12, io base 0x0000d400
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12
>uhci_hcd 0000:00:07.3: UHCI Host Controller
>uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:07.3: irq 12, io base 0x0000d800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:0b.0: irq 12, io mem 0xeb000000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>ohci_hcd 0000:00:0b.1: OHCI Host Controller
>ohci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:0b.1: irq 10, io mem 0xeb001000
>usb 1-1: configuration #1 chosen from 1 choice
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 4 ports detected
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:0b.2[C] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>ehci_hcd 0000:00:0b.2: EHCI Host Controller
>ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:0b.2: irq 11, io mem 0xeb002000
>ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 5 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>pata_via 0000:00:07.1: version 0.3.1
>scsi0 : pata_via
>scsi1 : pata_via
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001d000 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001d008 irq 15
>ata1.00: ATA-5: IC35L060AVER07-0, ER6OA44A, max UDMA/100
>ata1.00: 120103200 sectors, multi 16: LBA 
>ata1.00: limited to UDMA/33 due to 40-wire cable
>ata1.00: configured for UDMA/33
>usb 1-1.2: new full speed USB device using uhci_hcd and address 3
>ata2.00: ATAPI: HP      DVD Writer 840x, S632, max UDMA/33
>usb 1-1.2: configuration #1 chosen from 1 choice
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      IC35L060AVER07-0 ER6O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 120103200 512-byte hardware sectors (61493 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 120103200 512-byte hardware sectors (61493 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            HP       DVD Writer 840x  S632 PQ: 0 ANSI: 5
>usb 1-1.3: new low speed USB device using uhci_hcd and address 4
>usb 1-1.3: configuration #1 chosen from 1 choice
>input: Chicony Saitek Eclipse Keyboard as /class/input/input1
>input: USB HID v1.11 Keyboard [Chicony Saitek Eclipse Keyboard] on usb-0000:00:07.2-1.3
>input: Chicony Saitek Eclipse Keyboard as /class/input/input2
>input,hiddev96: USB HID v1.11 Device [Chicony Saitek Eclipse Keyboard] on usb-0000:00:07.2-1.3
>usb 1-1.4: new low speed USB device using uhci_hcd and address 5
>usb 1-1.4: configuration #1 chosen from 1 choice
>input: Logitech USB Mouse as /class/input/input3
>input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:07.2-1.4
>usb 5-2: new high speed USB device using ehci_hcd and address 2
>usb 5-2: configuration #1 chosen from 1 choice
>usb 3-2: new full speed USB device using ohci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>hub 3-2:1.0: USB hub found
>hub 3-2:1.0: 4 ports detected
>usb 3-2.2: new full speed USB device using ohci_hcd and address 3
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usb 3-2.2: device not accepting address 3, error -62
>usb 3-2.2: new full speed USB device using ohci_hcd and address 4
>usb 3-2.2: device not accepting address 4, error -62
>usb 3-2.2: new full speed USB device using ohci_hcd and address 5
>usb 3-2.2: not running at top speed; connect to a high speed hub
>usb 3-2.2: configuration #1 chosen from 1 choice
>scsi3 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 5
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access     FUJITSU  MHM2200AT        5823 PQ: 0 ANSI: 0
>sd 2:0:0:0: [sdb] 39070080 512-byte hardware sectors (20004 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
>sd 2:0:0:0: [sdb] 39070080 512-byte hardware sectors (20004 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 2:0:0:0: [sdb] Attached SCSI disk
>usb-storage: device scan complete
>scsi 3:0:0:0: Direct-Access     Memorex  TD Classic 003B  PMAP PQ: 0 ANSI: 0 CCS
>sd 3:0:0:0: [sdc] 2009088 512-byte hardware sectors (1029 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 23 00 00 00
>sd 3:0:0:0: [sdc] Assuming drive cache: write through
>sd 3:0:0:0: [sdc] 2009088 512-byte hardware sectors (1029 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 23 00 00 00
>sd 3:0:0:0: [sdc] Assuming drive cache: write through
> sdc: sdc1
>sd 3:0:0:0: [sdc] Attached SCSI removable disk
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1188413831.953:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>parport_pc: VIA 686A/8231 detected
>parport_pc: probing current configuration
>parport_pc: Current parallel port base: 0x378
>parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
>parport_pc: VIA parallel port: io=0x378, irq=7
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x8204
>usbcore: registered new interface driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>eth0: RealTek RTL8139 at 0xf0996000, 00:11:95:1d:d0:47, IRQ 11
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
>usbcore: registered new interface driver snd-usb-audio
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Adding 1048568k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:1048568k
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>audit(1188413858.371:3): audit_pid=1765 old=0 by auid=4294967295
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (6143 buckets, 49144 max)
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>eth0: no IPv6 routers present
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=235 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=215 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=80 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=60 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=235 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=215 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=80 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=60 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=235 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=215 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=80 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=60 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=165 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=145 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=54 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=173 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=153 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=172 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=152 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=173 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=153 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=173 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=153 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=172 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=152 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=217 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=197 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=54 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=262 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=242 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=217 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=197 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=165 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=145 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=54 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=262 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=242 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=217 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=197 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=55273 PROTO=2 
>ppdev: user-space parallel port driver
>ppdev0: registered pardevice
>ppdev0: unregistered pardevice
>ppdev1: claim the port first
>ppdev2: claim the port first
>ppdev3: claim the port first
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>ppdev0: registered pardevice
>ppdev0: unregistered pardevice
>ppdev1: claim the port first
>ppdev2: claim the port first
>ppdev3: claim the port first
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=33079 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=35497 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=36894 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=38862 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=40308 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=42093 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=43551 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=44861 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=46795 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=48260 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=26562 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=54973 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=56369 PROTO=2 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=81 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=61 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=81 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=61 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=81 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=61 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=98 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=78 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=98 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=78 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=98 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=78 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=219 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=199 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=219 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=199 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=219 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=199 
>Inbound IN=eth0 OUT= MAC=00:11:95:1d:d0:47:00:13:10:40:80:44:08:00 SRC=72.80.155.150 DST=192.168.1.100 LEN=177 TOS=0x00 PREC=0x20 TTL=114 ID=36688 PROTO=UDP SPT=63424 DPT=8357 LEN=157 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=203 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=183 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=203 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=183 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=203 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=183 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=3039 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=63920 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=28744 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=30732 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=32150 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=34028 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=35358 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=64016 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=15067 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=16404 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=18333 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=19723 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=21069 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=22937 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=24259 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=26164 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=27460 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=5023 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=7288 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=8668 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=10528 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=38931 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=40267 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=42275 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=43801 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=45900 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=47384 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=21002 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=27589 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=29009 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=31051 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=32589 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=34049 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=38279 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=39828 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=41687 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=43048 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=13147 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=22784 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=24160 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=26008 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=27452 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=28899 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=57230 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=58792 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=61168 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=62605 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=31414 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=41891 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=43331 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=45706 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=47021 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=48443 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=49844 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=51512 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=53546 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=54894 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=7233 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=34270 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=36274 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=52187 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=49895 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=8617 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=9858 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=11630 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=13512 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usbcore: deregistering interface driver snd-usb-audio
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=41740 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=64084 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=21064 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=22688 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=24628 PROTO=2 
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>usb 1-1.4: reset low speed USB device using uhci_hcd and address 5
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=25961 PROTO=2 
>Inbound IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:09:12:83:f8:21:08:00 SRC=73.163.184.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0xC0 TTL=1 ID=27317 PROTO=2 
>

Actions: View

Attachments on bug 265181: 179721 | 296510 | 296511