Attachment 180541 Details for Bug 252301 – dmesg from 2925.14.fc8

dmesg from 2925.14.fc8

2.6.21-2925.14.fc8xen (text/plain), 22.93 KB, created by Adam Tkac on 2007-08-30 10:39:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Adam Tkac

Created: 2007-08-30 10:39:44 UTC

Size: 22.93 KB

patch

obsolete

>Linux version 2.6.21-2925.14.fc8xen (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070723 (Red Hat 4.1.2-16)) #1 SMP Tue Jul 24 15:30:41 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize bail 0
>copy_e820_map() start: 0000000000000000 size: 0000000076dc2000 end: 0000000076dc2000 type: 1
> Xen: 0000000000000000 - 0000000076dc2000 (usable)
>1173MB HIGHMEM available.
>727MB LOWMEM available.
>NX (Execute Disable) protection: active
>Entering add_active_range(0, 0, 486850) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->   186366
>  Normal     186366 ->   186366
>  HighMem    186366 ->   486850
>early_node_map[1] active PFN ranges
>    0:        0 ->   486850
>On node 0 totalpages: 486850
>  DMA zone: 1455 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 184911 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  HighMem zone: 2347 pages used for memmap
>  HighMem zone: 298137 pages, LIFO batch:31
>found SMP MP-table at 000fe710
>DMI 2.3 present.
>ACPI: RSDP 000FEBF0, 0024 (r2 DELL  )
>ACPI: XSDT 000FCE8E, 006C (r1 DELL    B8K           14 ASL        61)
>ACPI: FACP 000FCFB6, 00F4 (r3 DELL    B8K           14 ASL        61)
>ACPI: DSDT FFF69AB8, 4337 (r1   DELL    dt_ex     1000 INTL 20050624)
>ACPI: FACS 7FDFFC00, 0040
>ACPI: SSDT FFF6E0C7, 009A (r1   DELL    st_ex     1000 INTL 20050624)
>ACPI: APIC 000FD0AA, 0092 (r1 DELL    B8K           14 ASL        61)
>ACPI: BOOT 000FD13C, 0028 (r1 DELL    B8K           14 ASL        61)
>ACPI: ASF! 000FD164, 0092 (r32 DELL    B8K           14 ASL        61)
>ACPI: MCFG 000FD1F6, 003E (r1 DELL    B8K           14 ASL        61)
>ACPI: HPET 000FD234, 0038 (r1 DELL    B8K           14 ASL        61)
>ACPI: TCPA 000FD490, 0032 (r1 DELL    B8K           14 ASL        61)
>ACPI: SLIC 000FD26C, 0176 (r1 DELL    B8K           14 ASL        61)
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Detected 1860.755 MHz processor.
>Built 1 zonelists.  Total pages: 483048
>Kernel command line: ro root=LABEL=/ rhgb quiet
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c136c000 soft=c134c000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Xen reported: 1860.710 MHz processor.
>Console: colour VGA+ 80x50
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Software IO TLB enabled: 
> Aperture:     2 megabytes
> Kernel range: c0345000 - c0545000
> Address size: 24 bits
>vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000
>Memory: 1905196k/1947400k available (2072k kernel code, 32864k reserved, 1079k data, 188k init, 1201936k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xf5315000 - 0xf57fe000   (5028 kB)
>    pkmap   : 0xf5000000 - 0xf5200000   (2048 kB)
>    vmalloc : 0xee000000 - 0xf4ffe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xed7fe000   ( 727 MB)
>      .init : 0xc1319000 - 0xc1348000   ( 188 kB)
>      .data : 0xc12060af - 0xc1313fd4   (1079 kB)
>      .text : 0xc1000000 - 0xc12060af   (2072 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3722.97 BogoMIPS (lpj=7445943)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebd3f1 20100000 00000000 00000000 0000e3bd 00000000 00000001
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: bfebd3f1 20100000 00000000 00003940 0000e3bd 00000000 00000001
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU 1 irqstacks, hard=c136d000 soft=c134d000
>ENABLING IO-APIC IRQs
>SMP alternatives: switching to SMP code
>Brought up 2 CPUs
>Initializing CPU#1
>sizeof(vma)=88 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1376 bytes
>migration_cost=25
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>Setting up standard PCI resources
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH6 GPIO
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>xen_mem: Initialising balloon driver.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: ioport range 0x800-0x85f has been reserved
>pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:01: ioport range 0x860-0x8ff could not be reserved
>pnp: 00:08: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:08: iomem range 0x100000-0xffffff could not be reserved
>pnp: 00:08: iomem range 0x1000000-0x7fdffbff could not be reserved
>pnp: 00:08: iomem range 0xf0000-0xfffff could not be reserved
>pnp: 00:09: ioport range 0x100-0x1fe has been reserved
>pnp: 00:09: ioport range 0x200-0x277 has been reserved
>pnp: 00:09: ioport range 0x280-0x2e7 has been reserved
>pnp: 00:09: ioport range 0x2f0-0x2f7 has been reserved
>pnp: 00:09: ioport range 0x300-0x377 has been reserved
>pnp: 00:09: ioport range 0x380-0x3bb has been reserved
>pnp: 00:09: ioport range 0x3c0-0x3e7 could not be reserved
>pnp: 00:09: ioport range 0x3f6-0x3f7 has been reserved
>pnp: 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:09: iomem range 0xfeda0000-0xfedacfff has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: d000-dfff
>  MEM window: dfd00000-dfefffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: dfc00000-dfcfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: dfb00000-dfbfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 7028k freed
>Simple Boot Flag at 0x7a set to 0x1
>audit: initializing netlink socket (disabled)
>audit(1188472587.392:1): initialized
>highmem bounce pool size: 64 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>Real Time Clock Driver v1.12ac
>hpet_acpi_add: no address or irqs in _CRS
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 965Q Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Xen virtual console successfully installed as ttyS0
>Event-channel device installed.
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 188k freed
>Write protecting the kernel read-only data: 795k
>4gb seg fixup, process init (pid 1), cs:ip 73:00aaab2d
>4gb seg fixup, process init (pid 1), cs:ip 73:00a29c1d
>4gb seg fixup, process init (pid 1), cs:ip 73:00aaab2d
>4gb seg fixup, process init (pid 1), cs:ip 73:00a29c1d
>4gb seg fixup, process init (pid 1), cs:ip 73:00aa1760
>4gb seg fixup, process init (pid 1), cs:ip 73:00b18cf9
>4gb seg fixup, process init (pid 1), cs:ip 73:00aa4ffc
>4gb seg fixup, process init (pid 1), cs:ip 73:00aa500a
>4gb seg fixup, process init (pid 1), cs:ip 73:00afc0d2
>4gb seg fixup, process init (pid 1), cs:ip 73:00a9e021
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000ff80
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new low speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000ff40
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-1: configuration #1 chosen from 1 choice
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 20, io mem 0xdfffbc00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 18, io mem 0xff980800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>usb 1-1: USB disconnect, address 2
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ata_piix 0000:00:1f.2: version 2.10ac1
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x0001fe00 ctl 0x0001fe12 bmdma 0x0001fec0 irq 21
>ata2: SATA max UDMA/133 cmd 0x0001fe20 ctl 0x0001fe32 bmdma 0x0001fec8 irq 21
>scsi0 : ata_piix
>ata1.00: ata_hpa_resize 1: sectors = 312500000, hpa_sectors = 312500000
>ata1.00: ATA-7: ST3160812AS, 3.ADJ, max UDMA/133
>ata1.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
>ata1.00: ata_hpa_resize 1: sectors = 312500000, hpa_sectors = 312500000
>ata1.00: configured for UDMA/133
>scsi1 : ata_piix
>usb 1-1: new low speed USB device using uhci_hcd and address 3
>ata2.00: ATAPI, max UDMA/33
>ata2.00: applying bridge limits
>usb 1-1: configuration #1 chosen from 1 choice
>input: Dell Dell USB Keyboard as /class/input/input1
>input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      ST3160812AS      3.AD PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-H653A D300 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
>usb 1-2: new low speed USB device using uhci_hcd and address 4
>ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 20 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata3: SATA max UDMA/133 cmd 0x0001fe40 ctl 0x0001fe52 bmdma 0x0001fed0 irq 21
>ata4: SATA max UDMA/133 cmd 0x0001fe60 ctl 0x0001fe72 bmdma 0x0001fed8 irq 21
>scsi2 : ata_piix
>usb 1-2: configuration #1 chosen from 1 choice
>scsi3 : ata_piix
>input: Logitech Optical USB Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.0-2
>printk: 16046 messages suppressed.
>4gb seg fixup, process init (pid 1), cs:ip 73:00aa4ffc
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1188472595.940:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 20 (level, low) -> IRQ 21
>tg3.c:v3.75.2 (June 5, 2007)
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>eth0: Tigon3 [partno(BCM95754) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:18:8b:2b:e4:d9
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>input: PC Speaker as /class/input/input3
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>8250_pnp: Unknown symbol serial8250_unregister_port
>8250_pnp: Unknown symbol serial8250_register_port
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>Floppy drive(s): fd0 is 1.44M
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>floppy0: no floppy controllers found
>No dock devices found.
>ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: found ejectable bay
>ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.IDE1.PRI1.MAS1] Added
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [VBTN]
>ibm_acpi: ec object not found
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>loop: loaded (max 8 devices)
>EXT3 FS on sda1, internal journal
>Adding 2096472k swap on /dev/sda2.  Priority:-1 extents:1 across:2096472k
>BUG: warning at kernel/irq/manage.c:33/synchronize_irq() (Not tainted)
> [<c104a7a1>] synchronize_irq+0x52/0x6a
> [<ee187db1>] tg3_chip_reset+0x8c/0x578 [tg3]
> [<ee18863d>] tg3_reset_hw+0x4a/0x139b [tg3]
> [<c10e42d0>] __delay+0x6/0x7
> [<c10e42d0>] __delay+0x6/0x7
> [<ee183f27>] _tw32_flush+0x3f/0x51 [tg3]
> [<c10e42d0>] __delay+0x6/0x7
> [<ee1858cf>] tg3_switch_clocks+0x8f/0x93 [tg3]
> [<ee18f78b>] tg3_open+0x26f/0x53f [tg3]
> [<c11a3234>] dev_open+0x2b/0x62
> [<c11a1b8f>] dev_change_flags+0x47/0xe4
> [<c11de994>] devinet_ioctl+0x250/0x56a
> [<c10e4ad8>] copy_to_user+0x3c/0x50
> [<c11989bf>] sock_ioctl+0x19f/0x1be
> [<c1198820>] sock_ioctl+0x0/0x1be
> [<c107c2f7>] do_ioctl+0x1f/0x62
> [<c107c57e>] vfs_ioctl+0x244/0x256
> [<c107c5dc>] sys_ioctl+0x4c/0x64
> [<c1005680>] syscall_call+0x7/0xb
> =======================
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Bridge firewalling registered
>BUG: warning at kernel/irq/manage.c:33/synchronize_irq() (Not tainted)
> [<c104a7a1>] synchronize_irq+0x52/0x6a
> [<ee187db1>] tg3_chip_reset+0x8c/0x578 [tg3]
> [<ee1882c4>] tg3_halt+0x27/0x41 [tg3]
> [<ee18fab3>] tg3_close+0x58/0xe7 [tg3]
> [<c11a2784>] dev_close+0x48/0x61
> [<c11a1b8f>] dev_change_flags+0x47/0xe4
> [<c11de994>] devinet_ioctl+0x250/0x56a
> [<c10e4ad8>] copy_to_user+0x3c/0x50
> [<c11989bf>] sock_ioctl+0x19f/0x1be
> [<c1198820>] sock_ioctl+0x0/0x1be
> [<c107c2f7>] do_ioctl+0x1f/0x62
> [<c107c57e>] vfs_ioctl+0x244/0x256
> [<c107c5dc>] sys_ioctl+0x4c/0x64
> [<c1005680>] syscall_call+0x7/0xb
> =======================
>BUG: warning at kernel/irq/manage.c:33/synchronize_irq() (Not tainted)
> [<c104a7a1>] synchronize_irq+0x52/0x6a
> [<ee187db1>] tg3_chip_reset+0x8c/0x578 [tg3]
> [<ee18863d>] tg3_reset_hw+0x4a/0x139b [tg3]
> [<c10e42d0>] __delay+0x6/0x7
> [<c10e42d0>] __delay+0x6/0x7
> [<ee183f27>] _tw32_flush+0x3f/0x51 [tg3]
> [<c10e42d0>] __delay+0x6/0x7
> [<ee1858cf>] tg3_switch_clocks+0x8f/0x93 [tg3]
> [<ee18f78b>] tg3_open+0x26f/0x53f [tg3]
> [<c11a3234>] dev_open+0x2b/0x62
> [<c11a1b8f>] dev_change_flags+0x47/0xe4
> [<c11de994>] devinet_ioctl+0x250/0x56a
> [<c10e4ad8>] copy_to_user+0x3c/0x50
> [<c11989bf>] sock_ioctl+0x19f/0x1be
> [<c1198820>] sock_ioctl+0x0/0x1be
> [<c107c2f7>] do_ioctl+0x1f/0x62
> [<c107c57e>] vfs_ioctl+0x244/0x256
> [<c107c5dc>] sys_ioctl+0x4c/0x64
> [<c1005680>] syscall_call+0x7/0xb
> =======================
>ADDRCONF(NETDEV_UP): peth0: link is not ready
>vnet0: no IPv6 routers present
>tg3: peth0: Link is up at 1000 Mbps, full duplex.
>tg3: peth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
>device peth0 entered promiscuous mode
>audit(1188465448.162:3): dev=peth0 prom=256 old_prom=0 auid=4294967295
>eth0: port 1(peth0) entering learning state
>eth0: topology change detected, propagating
>eth0: port 1(peth0) entering forwarding state

Actions: View

Attachments on bug 252301: 161334 | 172373 | 180541 | 180561 | 180581 | 180601 | 188501