Attachment 185361 Details for Bug 275401 – dmesg results also shows the wireless card doesnt work

dmesg results also shows the wireless card doesnt work

dmesg.txt (text/plain), 36.92 KB, created by anoop nair on 2007-09-03 17:11:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: anoop nair

Created: 2007-09-03 17:11:59 UTC

Size: 36.92 KB

patch

obsolete

>Linux version 2.6.23-0.61.rc1.git9.fc8 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070723 (Red Hat 4.1.2-17)) #1 SMP Tue Jul 31 17:23:22 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
> BIOS-e820: 000000003f7d0000 - 000000003f7e5600 (reserved)
> BIOS-e820: 000000003f7e5600 - 000000003f7f8000 (ACPI NVS)
> BIOS-e820: 000000003f7f8000 - 000000003f800000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>119MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 260048) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   260048
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   260048
>On node 0 totalpages: 260048
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4040 pages, LIFO batch:0
>  Normal zone: 3080 pages used for memmap
>  Normal zone: 222200 pages, LIFO batch:31
>  HighMem zone: 419 pages used for memmap
>  HighMem zone: 30253 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000F7BD0, 0024 (r2 HP    )
>ACPI: XSDT 3F7E57C4, 0074 (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: FACP 3F7E5684, 00F4 (r4 HP     30A2            3 HP          1)
>ACPI: DSDT 3F7E5AC0, F9BB (r1 HP       nx7400    10000 MSFT  100000E)
>ACPI: FACS 3F7F7E80, 0040
>ACPI: SLIC 3F7E5838, 0176 (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: HPET 3F7E59B0, 0038 (r1 HP     30A2            1 HP          1)
>ACPI: APIC 3F7E59E8, 0068 (r1 HP     30A2            1 HP          1)
>ACPI: MCFG 3F7E5A50, 003C (r1 HP     30A2            1 HP          1)
>ACPI: TCPA 3F7E5A8C, 0032 (r2 HP     30A2            1 HP          1)
>ACPI: SSDT 3F7F547B, 0326 (r1 HP       HPQSAT        1 MSFT  100000E)
>ACPI: SSDT 3F7F5FF6, 025F (r1 HP      Cpu0Tst     3000 INTL 20060317)
>ACPI: SSDT 3F7F6255, 00A6 (r1 HP      Cpu1Tst     3000 INTL 20060317)
>ACPI: SSDT 3F7F62FB, 04D7 (r1 HP        CpuPm     3000 INTL 20060317)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 3f800000:bf400000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 256493
>Kernel command line: initrd=initrd.img  ro quiet root=CDLABEL=Fedora-8-Test-1-KDE-Live-i686 rootfstype=iso9660 liveimg live_ram BOOT_IMAGE=vmlinuz 
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0815000 soft=c07f5000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1995.040 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1024 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1012284k/1040192k available (2237k kernel code, 27160k reserved, 1213k data, 568k init, 122688k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0764000 - 0xc07f2000   ( 568 kB)
>      .data : 0xc062f55a - 0xc075ea44   (1213 kB)
>      .text : 0xc0400000 - 0xc062f55a   (2237 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Calibrating delay using timer specific routine.. 3994.96 BogoMIPS (lpj=1997480)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>lockdep: not fixing up alternatives.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0816000 soft=c07f6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.03 BogoMIPS (lpj=1995015)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>Total of 2 processors activated (7984.99 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=604 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=856 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=3360 bytes
>khelper used greatest stack depth: 3160 bytes left
>khelper used greatest stack depth: 3084 bytes left
>HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
>Booting paravirtualized kernel on bare hardware
>Time: 21:45:42  Date: 08/03/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62<6>ACPI: PCI Root Bridge [C002] (0000:00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1100-113f claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses')
>Please report the result to <bk@suse.de> to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C098._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C104._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C114._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C11A._PRT]
>ACPI: PCI Interrupt Link [C110] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C111] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C112] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C113] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C12C] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C12E] (IRQs 10 11) *0, disabled.
>ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126]
>ACPI: Power Resource [C200] (on)
>ACPI: Power Resource [C21D] (on)
>ACPI: Power Resource [C226] (off)
>ACPI: Power Resource [C320] (off)
>ACPI: Power Resource [C321] (off)
>ACPI: Power Resource [C322] (off)
>ACPI: Power Resource [C323] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>ACPI: RTC can wake from S4
>Time: tsc clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:00: iomem range 0x100000-0x3f7fffff could not be reserved
>pnp: 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
>pnp: 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
>pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:0b: ioport range 0x1000-0x107f has been reserved
>pnp: 00:0b: ioport range 0x1100-0x113f has been reserved
>pnp: 00:0b: ioport range 0x1200-0x121f has been reserved
>pnp: 00:0b: iomem range 0xf8000000-0xfbffffff has been reserved
>pnp: 00:0b: iomem range 0xfec00000-0xfec000ff could not be reserved
>pnp: 00:0b: iomem range 0xfed20000-0xfed3ffff could not be reserved
>pnp: 00:0b: iomem range 0xfed45000-0xfed8ffff could not be reserved
>pnp: 00:0c: iomem range 0xfeda0000-0xfedbffff could not be reserved
>pnp: 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: f4000000-f40fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: 2000-3fff
>  MEM window: f0000000-f3ffffff
>  PREFETCH window: disabled.
>PCI: Bus 3, cardbus bridge: 0000:02:06.0
>  IO window: 00005000-000050ff
>  IO window: 00005400-000054ff
>  PREFETCH window: 40000000-43ffffff
>  MEM window: 44000000-47ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 5000-5fff
>  MEM window: f4100000-f43fffff
>  PREFETCH window: 40000000-43ffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 19
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 65536 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 4494k freed
>khelper used greatest stack depth: 3040 bytes left
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1188855943.046:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 31619A5828880B69
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Transitioning device [C324] to D3
>ACPI: Transitioning device [C324] to D3
>ACPI: Fan [C324] (off)
>ACPI: Transitioning device [C325] to D3
>ACPI: Transitioning device [C325] to D3
>ACPI: Fan [C325] (off)
>ACPI: Transitioning device [C326] to D3
>ACPI: Transitioning device [C326] to D3
>ACPI: Fan [C326] (off)
>ACPI: Transitioning device [C327] to D3
>ACPI: Transitioning device [C327] to D3
>ACPI: Fan [C327] (off)
>ACPI: SSDT 3F7F5869, 023D (r1 HP      Cpu0Ist     3000 INTL 20060317)
>ACPI: SSDT 3F7F5B2B, 04CB (r1 HP      Cpu0Cst     3001 INTL 20060317)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 3F7F57A1, 00C8 (r1 HP      Cpu1Ist     3000 INTL 20060317)
>ACPI: SSDT 3F7F5AA6, 0085 (r1 HP      Cpu1Cst     3000 INTL 20060317)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Marking TSC unstable due to: possible TSC halt in C2.
>Time: hpet clocksource has been installed.
>ACPI: Thermal Zone [TZ0] (50 C)
>ACPI: Thermal Zone [TZ1] (43 C)
>ACPI: Thermal Zone [TZ2] (31 C)
>ACPI: Thermal Zone [TZ3] (28 C)
>ACPI: Thermal Zone [TZ4] (72 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>hpet_resources: 0xfed00000 is busy
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:02:06.0 [103c:30a2]
>Yenta: Enabling burst memory read transactions
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:06.0, mfunc 0x01011b22, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 19
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
>pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>cs: IO port probe 0x5000-0x5fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf43fffff
>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
>Clocksource tsc unstable (delta = -384217060 ns)
>PNP: PS/2 Controller [PNP0303:C21A,PNP0f13:C21B] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 7:706:802
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 568k freed
>Write protecting the kernel read-only data: 914k
>mount used greatest stack depth: 2968 bytes left
>mkdir used greatest stack depth: 2964 bytes left
>ln used greatest stack depth: 2912 bytes left
>mount used greatest stack depth: 2560 bytes left
>SCSI subsystem initialized
>modprobe used greatest stack depth: 2312 bytes left
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000
>serio: Synaptics pass-through port at isa0060/serio4/input0
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004020
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>libata version 2.21 loaded.
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004040
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4584000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 8 ports detected
>ahci 0000:00:1f.2: version 2.3
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 cmd 0xf8876100 ctl 0x00000000 bmdma 0x00000000 irq 220
>ata2: SATA max UDMA/133 cmd 0xf8876180 ctl 0x00000000 bmdma 0x00000000 irq 220
>ata3: SATA max UDMA/133 cmd 0xf8876200 ctl 0x00000000 bmdma 0x00000000 irq 220
>ata4: SATA max UDMA/133 cmd 0xf8876280 ctl 0x00000000 bmdma 0x00000000 irq 220
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: FUJITSU MHV2120BH PL, 892C, max UDMA/100
>ata1.00: 234441648 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2: SATA link down (SStatus 0 SControl 0)
>ata3: SATA link down (SStatus 0 SControl 0)
>ata4: SATA link down (SStatus 0 SControl 0)
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2120B 892C PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.1: version 2.11
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>modprobe used greatest stack depth: 1912 bytes left
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000140a0 irq 14
>ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000140a8 irq 15
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>modprobe used greatest stack depth: 1648 bytes left
>ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PC05, max MWDMA2
>ata5.00: configured for MWDMA2
>ata6: port disabled. ignoring.
>scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T10N  PC05 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 19, io base 0x00004060
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004080
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>modprobe used greatest stack depth: 1396 bytes left
>ISO 9660 Extensions: Microsoft Joliet Level 3
>Unable to load NLS charset utf8
>Unable to load NLS charset utf8
>ISO 9660 Extensions: RRIP_1991A
>mount used greatest stack depth: 1132 bytes left
>loop: module loaded
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1188856206.814:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  5 users, 11 roles, 2243 types, 104 bools, 1 sens, 1024 cats
>security:  61 classes, 222105 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=197188
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=196798
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=196785
>SELinux: initialized (dev loop120, type squashfs), not configured for labeling
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1188856207.158:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 4:0:0:0: Attached scsi generic sg1 type 5
>Floppy drive(s): fd0 is 1.44M
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>audit(1188870610.673:4): avc:  denied  { relabelfrom } for  pid=2103 comm="udevd" name="usbdev1.1_ep81" dev=tmpfs ino=7486 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:device_t:s0 tclass=lnk_file
>audit(1188870610.675:5): avc:  denied  { relabelfrom } for  pid=2111 comm="udevd" name="usbdev5.1_ep00" dev=tmpfs ino=7506 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:device_t:s0 tclass=lnk_file
>audit(1188870610.683:6): avc:  denied  { relabelfrom } for  pid=2104 comm="udevd" name="usbdev2.1_ep00" dev=tmpfs ino=7536 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:device_t:s0 tclass=lnk_file
>audit(1188870610.688:7): avc:  denied  { relabelfrom } for  pid=2107 comm="udevd" name="usbdev3.1_ep81" dev=tmpfs ino=7562 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:device_t:s0 tclass=lnk_file
>audit(1188870610.691:8): avc:  denied  { relabelfrom } for  pid=2112 comm="udevd" name="usbdev5.1_ep81" dev=tmpfs ino=7589 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:device_t:s0 tclass=lnk_file
>audit(1188870610.694:9): avc:  denied  { relabelfrom } for  pid=2102 comm="udevd" name="usbdev1.1_ep00" dev=tmpfs ino=7617 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:device_t:s0 tclass=lnk_file
>audit(1188870610.696:10): avc:  denied  { relabelfrom } for  pid=2109 comm="udevd" name="usbdev4.1_ep81" dev=tmpfs ino=7635 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:device_t:s0 tclass=lnk_file
>audit(1188870610.698:11): avc:  denied  { relabelfrom } for  pid=2106 comm="udevd" name="usbdev3.1_ep00" dev=tmpfs ino=7646 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:device_t:s0 tclass=lnk_file
>audit(1188870610.701:12): avc:  denied  { relabelfrom } for  pid=2105 comm="udevd" name="usbdev2.1_ep81" dev=tmpfs ino=7673 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:device_t:s0 tclass=lnk_file
>audit(1188870610.703:13): avc:  denied  { relabelfrom } for  pid=2108 comm="udevd" name="usbdev4.1_ep00" dev=tmpfs ino=7695 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:device_t:s0 tclass=lnk_file
>ACPI: AC Adapter [C1BC] (off-line)
>ACPI: Battery Slot [C1BE] (battery present)
>ACPI: Battery Slot [C1BD] (battery absent)
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input4
>ACPI: Sleep Button (CM) [C243]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [C23C]
>ACPI: Video Device [C085] (multi-head: yes  rom: no  post: no)
>intel_rng: FWH not detected
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.1.6kd
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:10:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945BG Network Connection
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>parport_pc 00:02: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 18
>firewire_ohci: Added fw-ohci device 0000:02:06.1, OHCI version 1.10
>ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 16
>ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
>ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
>ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
>ssb: Switching to PCI core, index 2
>ssb: Sonics Silicon Backplane found on PCI device 0000:02:0e.0
>b44.c:v2.0
>ssb: Switching to Fast Ethernet core, index 0
>ssb: Switching to PCI core, index 2
>ssb: Switching to Fast Ethernet core, index 0
>eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:17:a4:dd:f3:fe
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>iwl3945: Tunable channels: 13 802.11bg, 0 802.11a channels
>wmaster0: Selected rate control algorithm 'iwl-3945-rs'
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>No dock devices found.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>rc.sysinit used greatest stack depth: 1096 bytes left
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>audit(1188870616.373:14): audit_pid=2996 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>floppy0: no floppy controllers found
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>iwl3945: Microcode SW error detected.  Restarting 0x82000008.
>iwl3945: Error Reply type 0x00000005 cmd REPLY_SCAN_CMD (0x80) seq 0x4418 ser 0x0000004B
>iwl3945: ipw going down 
>iwl3945: Can't stop Rx DMA.
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>fuse init (API version 7.8)
>SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>PM: Preparing system for mem sleep
>Stopping tasks ... done.
>PM: Entering mem sleep
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>ACPI handle has no context!
>pnp: Device 00:02 disabled.
>ACPI: PCI interrupt for device 0000:02:0e.0 disabled
>ACPI handle has no context!
>iwl3945: ipw going down 
>ACPI: PCI interrupt for device 0000:10:00.0 disabled
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.3 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>Disabling non-boot CPUs ...
>Breaking affinity for irq 16
>Breaking affinity for irq 17
>Breaking affinity for irq 18
>Breaking affinity for irq 220
>CPU 1 is now offline
>lockdep: not fixing up alternatives.
>CPU1 is down
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>Enabling non-boot CPUs ...
>lockdep: not fixing up alternatives.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0816000 soft=c07f6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.67 BogoMIPS (lpj=1995335)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>Switched to high resolution mode on CPU 1
>CPU1 is up
>APIC error on CPU1: 00(40)
>ACPI: Transitioning device [C327] to D3
>ACPI: Transitioning device [C327] to D3
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb1: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb2: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb4: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.3 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>usb usb5: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata6: port disabled. ignoring.
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata5.00: configured for MWDMA2
>Coming out of suspend...
>PCI: Enabling device 0000:10:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Enabling device 0000:02:0e.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 16
>pnp: Device 00:02 activated.
>ata4: SATA link down (SStatus 0 SControl 0)
>ata3: SATA link down (SStatus 0 SControl 0)
>ata2: SATA link down (SStatus 0 SControl 0)
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: configured for UDMA/100
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] Starting disk
>PM: Finishing wakeup.
>Restarting tasks ... done.
>
>=============================================
>[ INFO: possible recursive locking detected ]
>2.6.23-0.61.rc1.git9.fc8 #1
>---------------------------------------------
>kseriod/241 is trying to acquire lock:
> (&ps2dev->cmd_mutex){--..}, at: [<c062a5c5>] mutex_lock+0x21/0x24
>
>but task is already holding lock:
> (&ps2dev->cmd_mutex){--..}, at: [<c062a5c5>] mutex_lock+0x21/0x24
>
>other info that might help us debug this:
>4 locks held by kseriod/241:
> #0:  (serio_mutex){--..}, at: [<c062a5c5>] mutex_lock+0x21/0x24
> #1:  (&serio->drv_mutex){--..}, at: [<c062a5c5>] mutex_lock+0x21/0x24
> #2:  (psmouse_mutex){--..}, at: [<c062a5c5>] mutex_lock+0x21/0x24
> #3:  (&ps2dev->cmd_mutex){--..}, at: [<c062a5c5>] mutex_lock+0x21/0x24
>
>stack backtrace:
> [<c04063c8>] show_trace_log_lvl+0x1a/0x2f
> [<c0406e61>] show_trace+0x12/0x14
> [<c0406e79>] dump_stack+0x16/0x18
> [<c04497e6>] __lock_acquire+0x189/0xc67
> [<c044a73e>] lock_acquire+0x7b/0x9e
> [<c062a3d2>] __mutex_lock_slowpath+0x10a/0x2dc
> [<c062a5c5>] mutex_lock+0x21/0x24
> [<c059771b>] ps2_command+0x92/0x30e
> [<c059deac>] psmouse_sliced_command+0x1c/0x5a
> [<c05a01cf>] synaptics_pt_write+0x21/0x46
> [<c05974f0>] ps2_sendbyte+0x39/0xcb
> [<c059779a>] ps2_command+0x111/0x30e
> [<c059dae7>] psmouse_probe+0x1d/0x6c
> [<c059ec33>] psmouse_connect+0xf8/0x20c
> [<c0594ec4>] serio_connect_driver+0x1e/0x2e
> [<c0594eea>] serio_driver_probe+0x16/0x18
> [<c0572df1>] driver_probe_device+0xf2/0x173
> [<c0572e7a>] __device_attach+0x8/0xa
> [<c05721c6>] bus_for_each_drv+0x3c/0x67
> [<c0572f10>] device_attach+0x75/0x8a
> [<c0594f00>] serio_find_driver+0x14/0x3c
> [<c0595a3d>] serio_thread+0x166/0x2b9
> [<c043e404>] kthread+0x3b/0x63
> [<c0405e4b>] kernel_thread_helper+0x7/0x10
> =======================
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ADDRCONF(NETDEV_UP): eth0: link is not ready

Actions: View

Attachments on bug 275401: 185361