Attachment 188831 Details for Bug 280641 – /var/log/message from trying to boot a 2.6.22 kernel

/var/log/message from trying to boot a 2.6.22 kernel

alcor.messages.txt (text/plain), 39.33 KB, created by Karl Bellve on 2007-09-06 14:38:37 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Karl Bellve

Created: 2007-09-06 14:38:37 UTC

Size: 39.33 KB

patch

obsolete

>Aug 30 14:08:02 alcor kernel:  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>Aug 30 14:08:02 alcor kernel:  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>Aug 30 14:08:02 alcor kernel:  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>Aug 30 14:08:02 alcor kernel: end_pfn_map = 1048576
>Aug 30 14:08:02 alcor kernel: DMI 2.3 present.
>Aug 30 14:08:02 alcor kernel: ACPI: RSDP 000F88A0, 0014 (r0 ACPIAM)
>Aug 30 14:08:02 alcor kernel: ACPI: RSDT 3FFD0000, 0034 (r1 A M I  OEMRSDT   4000607 MSFT       97)
>Aug 30 14:08:02 alcor kernel: ACPI: FACP 3FFD0200, 0084 (r2 A M I  OEMFACP   4000607 MSFT       97)
>Aug 30 14:08:02 alcor kernel: ACPI: DSDT 3FFD0410, 57C8 (r1  1ACAI 1ACAI003        3 INTL  2002026)
>Aug 30 14:08:02 alcor kernel: ACPI: FACS 3FFDE000, 0040
>Aug 30 14:08:02 alcor kernel: ACPI: APIC 3FFD0390, 0078 (r1 A M I  OEMAPIC   4000607 MSFT       97)
>Aug 30 14:08:02 alcor kernel: ACPI: OEMB 3FFDE040, 0073 (r1 A M I  AMI_OEM   4000607 MSFT       97)
>Aug 30 14:08:02 alcor kernel: ACPI: MCFG 3FFD5BE0, 003C (r1 A M I  OEMMCFG   4000607 MSFT       97)
>Aug 30 14:08:02 alcor kernel: Scanning NUMA topology in Northbridge 24
>Aug 30 14:08:02 alcor kernel: No NUMA configuration found
>Aug 30 14:08:02 alcor kernel: Faking a node at 0000000000000000-000000003ffd0000
>Aug 30 14:08:02 alcor kernel: Bootmem setup node 0 0000000000000000-000000003ffd0000
>Aug 30 14:08:02 alcor kernel: Zone PFN ranges:
>Aug 30 14:08:02 alcor kernel:   DMA             0 ->     4096
>Aug 30 14:08:02 alcor kernel:   DMA32        4096 ->  1048576
>Aug 30 14:08:02 alcor kernel:   Normal    1048576 ->  1048576
>Aug 30 14:08:02 alcor kernel: early_node_map[2] active PFN ranges
>Aug 30 14:08:02 alcor kernel:     0:        0 ->      159
>Aug 30 14:08:02 alcor kernel:     0:      256 ->   262096
>Aug 30 14:08:02 alcor kernel: Nvidia board detected. Ignoring ACPI timer override.
>Aug 30 14:08:02 alcor kernel: If you got timer trouble try acpi_use_timer_override
>Aug 30 14:08:02 alcor kernel: ACPI: PM-Timer IO Port: 0x4008
>Aug 30 14:08:02 alcor kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Aug 30 14:08:02 alcor kernel: Processor #0 (Bootup-CPU)
>Aug 30 14:08:02 alcor kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>Aug 30 14:08:02 alcor kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>Aug 30 14:08:02 alcor kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>Aug 30 14:08:02 alcor kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>Aug 30 14:08:02 alcor kernel: IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>Aug 30 14:08:02 alcor kernel: ACPI: IOAPIC (id[0x02] address[0xdfefc000] gsi_base[24])
>Aug 30 14:08:02 alcor kernel: IOAPIC[1]: apic_id 2, address 0xdfefc000, GSI 24-47
>Aug 30 14:08:02 alcor kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>Aug 30 14:08:02 alcor kernel: ACPI: BIOS IRQ0 pin2 override ignored.
>Aug 30 14:08:02 alcor kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Aug 30 14:08:02 alcor kernel: Setting APIC routing to flat
>Aug 30 14:08:02 alcor kernel: Using ACPI (MADT) for SMP configuration information
>Aug 30 14:08:02 alcor kernel: swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>Aug 30 14:08:02 alcor kernel: swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e6000
>Aug 30 14:08:02 alcor kernel: swsusp: Registered nosave memory region: 00000000000e6000 - 0000000000100000
>Aug 30 14:08:02 alcor kernel: Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>Aug 30 14:08:02 alcor kernel: SMP: Allowing 4 CPUs, 3 hotplug CPUs
>Aug 30 14:08:02 alcor kernel: PERCPU: Allocating 40968 bytes of per cpu data
>Aug 30 14:08:02 alcor kernel: Built 1 zonelists.  Total pages: 257117
>Aug 30 14:08:02 alcor kernel: Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Aug 30 14:08:02 alcor kernel: Initializing CPU#0
>Aug 30 14:08:02 alcor kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
>Aug 30 14:08:02 alcor kernel: time.c: Detected 1800.008 MHz processor.
>Aug 30 14:08:02 alcor kernel: Console: colour VGA+ 80x25
>Aug 30 14:08:02 alcor kernel: Checking aperture...
>Aug 30 14:08:02 alcor kernel: CPU 0: aperture @ c092000000 size 32 MB
>Aug 30 14:08:02 alcor kernel: Aperture too small (32 MB)
>Aug 30 14:08:02 alcor kernel: No AGP bridge found
>Aug 30 14:08:02 alcor kernel: Memory: 1024372k/1048384k available (2362k kernel code, 23624k reserved, 1401k data, 312k init)
>Aug 30 14:08:02 alcor kernel: SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>Aug 30 14:08:02 alcor kernel: Calibrating delay using timer specific routine.. 3601.09 BogoMIPS (lpj=1800547)
>Aug 30 14:08:02 alcor kernel: Security Framework v1.0.0 initialized
>Aug 30 14:08:02 alcor kernel: SELinux:  Initializing.
>Aug 30 14:08:02 alcor kernel: selinux_register_security:  Registering secondary module capability
>Aug 30 14:08:02 alcor kernel: Capability LSM initialized as secondary
>Aug 30 14:08:02 alcor kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Aug 30 14:08:02 alcor kernel: Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Aug 30 14:08:02 alcor kernel: Mount-cache hash table entries: 256
>Aug 30 14:08:02 alcor kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>Aug 30 14:08:02 alcor kernel: CPU: L2 Cache: 1024K (64 bytes/line)
>Aug 30 14:08:02 alcor kernel: CPU 0/0 -> Node 0
>Aug 30 14:08:02 alcor kernel: SMP alternatives: switching to UP code
>Aug 30 14:08:02 alcor kernel: ACPI: Core revision 20070126
>Aug 30 14:08:02 alcor kernel: Using local APIC timer interrupts.
>Aug 30 14:08:02 alcor kernel: result 12500063
>Aug 30 14:08:02 alcor kernel: Detected 12.500 MHz APIC timer.
>Aug 30 14:08:02 alcor kernel: Brought up 1 CPUs
>Aug 30 14:08:02 alcor kernel: NET: Registered protocol family 16
>Aug 30 14:08:02 alcor kernel: ACPI: bus type pci registered
>Aug 30 14:08:02 alcor kernel: PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>Aug 30 14:08:02 alcor kernel: PCI: Not using MMCONFIG.
>Aug 30 14:08:02 alcor kernel: PCI: Using configuration type 1
>Aug 30 14:08:02 alcor kernel: ACPI: Interpreter enabled
>Aug 30 14:08:02 alcor kernel: ACPI: (supports S0 S1 S3 S4 S5)
>Aug 30 14:08:02 alcor kernel: ACPI: Using IOAPIC for interrupt routing
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
>Aug 30 14:08:02 alcor kernel: PCI: Transparent bridge - 0000:00:09.0
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Root Bridge [PCIB] (0000:80)
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *9
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *9
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0, disabled.
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *9
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *11
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *9
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *9
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *5
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LN2A] (IRQs 40 41 42 43) *0, disabled.
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LN2B] (IRQs 40 41 42 43) *0, disabled.
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LN2C] (IRQs 40 41 42 43) *0, disabled.
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LN2D] (IRQs 40 41 42 43) *0, disabled.
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LK2N] (IRQs 44 45 46 47) *0, disabled.
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LT3D] (IRQs 44 45 46 47) *0, disabled.
>Aug 30 14:08:02 alcor kernel: ACPI: PCI Interrupt Link [LT2E] (IRQs 44 45 46 47) *0, disabled.
>Aug 30 14:08:02 alcor kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
>Aug 30 14:08:02 alcor kernel: pnp: PnP ACPI init
>Aug 30 14:08:02 alcor kernel: ACPI: bus type pnp registered
>Aug 30 14:08:02 alcor kernel: pnp: PnP ACPI: found 16 devices
>Aug 30 14:08:02 alcor kernel: ACPI: ACPI bus type pnp unregistered
>Aug 30 14:08:02 alcor kernel: usbcore: registered new interface driver usbfs
>Aug 30 14:08:02 alcor kernel: usbcore: registered new interface driver hub
>Aug 30 14:08:02 alcor kernel: usbcore: registered new device driver usb
>Aug 30 14:08:02 alcor kernel: PCI: Using ACPI for IRQ routing
>Aug 30 14:08:02 alcor kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>Aug 30 14:08:02 alcor kernel: NetLabel: Initializing
>Aug 30 14:08:02 alcor kernel: NetLabel:  domain hash size = 128
>Aug 30 14:08:02 alcor kernel: NetLabel:  protocols = UNLABELED CIPSOv4
>Aug 30 14:08:02 alcor kernel: NetLabel:  unlabeled traffic allowed by default
>Aug 30 14:08:02 alcor kernel: ACPI: RTC can wake from S4
>Aug 30 14:08:02 alcor kernel: pnp: 00:09: iomem range 0xffb80000-0xfffffffe could not be reserved
>Aug 30 14:08:02 alcor kernel: pnp: 00:09: iomem range 0xdfefc000-0xdfefcfff has been reserved
>Aug 30 14:08:02 alcor kernel: pnp: 00:09: iomem range 0xdfefd000-0xdfefd3ff has been reserved
>Aug 30 14:08:02 alcor kernel: pnp: 00:09: iomem range 0xdfefe000-0xdfefe3ff has been reserved
>Aug 30 14:08:02 alcor kernel: pnp: 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
>Aug 30 14:08:02 alcor kernel: pnp: 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved
>Aug 30 14:08:02 alcor kernel: pnp: 00:0c: ioport range 0x680-0x6ff has been reserved
>Aug 30 14:08:02 alcor kernel: pnp: 00:0c: ioport range 0x295-0x296 has been reserved
>Aug 30 14:08:02 alcor kernel: pnp: 00:0c: ioport range 0x778-0x77f has been reserved
>Aug 30 14:08:02 alcor kernel: pnp: 00:0c: ioport range 0xb78-0xb7f has been reserved
>Aug 30 14:08:02 alcor kernel: pnp: 00:0c: ioport range 0xf78-0xf7f has been reserved
>Aug 30 14:08:02 alcor kernel: pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
>Aug 30 14:08:02 alcor kernel: pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
>Aug 30 14:08:02 alcor kernel: pnp: 00:0e: iomem range 0xc0000-0xdffff has been reserved
>Aug 30 14:08:02 alcor kernel: pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>Aug 30 14:08:02 alcor kernel: pnp: 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
>Aug 30 14:08:02 alcor kernel: PCI: Bridge: 0000:00:09.0
>Aug 30 14:08:02 alcor kernel:   IO window: disabled.
>Aug 30 14:08:02 alcor kernel:   MEM window: disabled.
>Aug 30 14:08:02 alcor kernel:   PREFETCH window: disabled.
>Aug 30 14:08:02 alcor kernel: PCI: Bridge: 0000:00:0d.0
>Aug 30 14:08:02 alcor kernel:   IO window: disabled.
>Aug 30 14:08:03 alcor kernel:   MEM window: disabled.
>Aug 30 14:08:03 alcor kernel:   PREFETCH window: disabled.
>Aug 30 14:08:03 alcor rpcbind: cannot bind * on udp: Address already in use
>Aug 30 14:08:03 alcor kernel: PCI: Bridge: 0000:00:0e.0
>Aug 30 14:08:03 alcor rpcbind: cannot bind tcp: Address already in use
>Aug 30 14:08:03 alcor kernel:   IO window: disabled.
>Aug 30 14:08:03 alcor kernel:   MEM window: bbb00000-bfbfffff
>Aug 30 14:08:03 alcor kernel:   PREFETCH window: bfd00000-dfcfffff
>Aug 30 14:08:03 alcor kernel: PCI: Bridge: 0000:80:0d.0
>Aug 30 14:08:03 alcor kernel:   IO window: disabled.
>Aug 30 14:08:03 alcor kernel:   MEM window: disabled.
>Aug 30 14:08:03 alcor kernel:   PREFETCH window: disabled.
>Aug 30 14:08:03 alcor kernel: PCI: Bridge: 0000:80:0e.0
>Aug 30 14:08:03 alcor kernel:   IO window: disabled.
>Aug 30 14:08:03 alcor kernel:   MEM window: disabled.
>Aug 30 14:08:03 alcor kernel:   PREFETCH window: disabled.
>Aug 30 14:08:03 alcor kernel: NET: Registered protocol family 2
>Aug 30 14:08:03 alcor kernel: Time: tsc clocksource has been installed.
>Aug 30 14:08:03 alcor kernel: IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>Aug 30 14:08:03 alcor kernel: TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>Aug 30 14:08:03 alcor kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>Aug 30 14:08:03 alcor kernel: TCP: Hash tables configured (established 131072 bind 65536)
>Aug 30 14:08:03 alcor kernel: TCP reno registered
>Aug 30 14:08:03 alcor kernel: checking if image is initramfs... it is
>Aug 30 14:08:03 alcor kernel: Freeing initrd memory: 3741k freed
>Aug 30 14:08:03 alcor kernel: audit: initializing netlink socket (disabled)
>Aug 30 14:08:03 alcor kernel: audit(1188482851.441:1): initialized
>Aug 30 14:08:03 alcor kernel: Total HugeTLB memory allocated, 0
>Aug 30 14:08:03 alcor kernel: VFS: Disk quotas dquot_6.5.1
>Aug 30 14:08:03 alcor kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Aug 30 14:08:03 alcor kernel: ksign: Installing public key data
>Aug 30 14:08:03 alcor kernel: Loading keyring
>Aug 30 14:08:03 alcor kernel: - Added public key 8321A2A758C22C88
>Aug 30 14:08:03 alcor kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key)
>Aug 30 14:08:03 alcor kernel: io scheduler noop registered
>Aug 30 14:08:03 alcor kernel: io scheduler anticipatory registered
>Aug 30 14:08:03 alcor kernel: io scheduler deadline registered
>Aug 30 14:08:03 alcor kernel: io scheduler cfq registered (default)
>Aug 30 14:08:03 alcor kernel: PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
>Aug 30 14:08:03 alcor kernel: PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>Aug 30 14:08:03 alcor kernel: PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
>Aug 30 14:08:03 alcor kernel: PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>Aug 30 14:08:03 alcor kernel: PCI: Found disabled HT MSI Mapping on 0000:80:0d.0
>Aug 30 14:08:03 alcor kernel: PCI: Found disabled HT MSI Mapping on 0000:80:00.0
>Aug 30 14:08:03 alcor kernel: PCI: MSI quirk detected. MSI disabled on chipset 0000:80:0d.0.
>Aug 30 14:08:03 alcor kernel: PCI: Found disabled HT MSI Mapping on 0000:80:0e.0
>Aug 30 14:08:03 alcor kernel: PCI: Found disabled HT MSI Mapping on 0000:80:00.0
>Aug 30 14:08:03 alcor kernel: PCI: MSI quirk detected. MSI disabled on chipset 0000:80:0e.0.
>Aug 30 14:08:03 alcor kernel: assign_interrupt_mode Found MSI capability
>Aug 30 14:08:03 alcor last message repeated 3 times
>Aug 30 14:08:03 alcor kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Aug 30 14:08:03 alcor kernel: ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
>Aug 30 14:08:03 alcor last message repeated 2 times
>Aug 30 14:08:03 alcor kernel: Generic RTC Driver v1.07
>Aug 30 14:08:03 alcor kernel: Non-volatile memory driver v1.2
>Aug 30 14:08:03 alcor kernel: Linux agpgart interface v0.102 (c) Dave Jones
>Aug 30 14:08:03 alcor kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Aug 30 14:08:03 alcor kernel: 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Aug 30 14:08:03 alcor kernel: 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>Aug 30 14:08:03 alcor kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Aug 30 14:08:03 alcor kernel: input: Macintosh mouse button emulation as /class/input/input0
>Aug 30 14:08:03 alcor kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>Aug 30 14:08:03 alcor kernel: PNP: PS/2 controller doesn't have AUX irq; using default 12
>Aug 30 14:08:03 alcor kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
>Aug 30 14:08:03 alcor kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
>Aug 30 14:08:03 alcor kernel: mice: PS/2 mouse device common for all mice
>Aug 30 14:08:03 alcor kernel: input: AT Translated Set 2 keyboard as /class/input/input1
>Aug 30 14:08:03 alcor kernel: usbcore: registered new interface driver hiddev
>Aug 30 14:08:03 alcor kernel: usbcore: registered new interface driver usbhid
>Aug 30 14:08:03 alcor kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>Aug 30 14:08:03 alcor kernel: TCP cubic registered
>Aug 30 14:08:03 alcor kernel: Initializing XFRM netlink socket
>Aug 30 14:08:03 alcor kernel: NET: Registered protocol family 1
>Aug 30 14:08:03 alcor kernel: NET: Registered protocol family 17
>Aug 30 14:08:03 alcor kernel: powernow-k8: Found 1 AMD Opteron(tm) Processor 244 processors (version 2.00.00)
>Aug 30 14:08:03 alcor kernel: powernow-k8: BIOS error - no PSB or ACPI _PSS objects
>Aug 30 14:08:03 alcor kernel: drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Aug 30 14:08:03 alcor kernel: Freeing unused kernel memory: 312k freed
>Aug 30 14:08:03 alcor kernel: Write protecting the kernel read-only data: 1060k
>Aug 30 14:08:03 alcor kernel: USB Universal Host Controller Interface driver v3.0
>Aug 30 14:08:03 alcor kernel: ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
>Aug 30 14:08:03 alcor kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, low) -> IRQ 22
>Aug 30 14:08:03 alcor kernel: ohci_hcd 0000:00:02.0: OHCI Host Controller
>Aug 30 14:08:03 alcor kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>Aug 30 14:08:03 alcor kernel: ohci_hcd 0000:00:02.0: irq 22, io mem 0xbfcfb000
>Aug 30 14:08:03 alcor kernel: usb usb1: configuration #1 chosen from 1 choice
>Aug 30 14:08:03 alcor kernel: hub 1-0:1.0: USB hub found
>Aug 30 14:08:03 alcor kernel: hub 1-0:1.0: 10 ports detected
>Aug 30 14:08:03 alcor kernel: ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
>Aug 30 14:08:03 alcor kernel: ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 21 (level, low) -> IRQ 21
>Aug 30 14:08:03 alcor kernel: ehci_hcd 0000:00:02.1: EHCI Host Controller
>Aug 30 14:08:03 alcor kernel: ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>Aug 30 14:08:03 alcor kernel: ehci_hcd 0000:00:02.1: debug port 1
>Aug 30 14:08:03 alcor kernel: ehci_hcd 0000:00:02.1: irq 21, io mem 0xbfce0000
>Aug 30 14:08:03 alcor kernel: ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>Aug 30 14:08:03 alcor kernel: usb usb2: configuration #1 chosen from 1 choice
>Aug 30 14:08:03 alcor kernel: hub 2-0:1.0: USB hub found
>Aug 30 14:08:03 alcor kernel: hub 2-0:1.0: 10 ports detected
>Aug 30 14:08:03 alcor kernel: SCSI subsystem initialized
>Aug 30 14:08:03 alcor kernel: ACPI: PCI Interrupt Link [LTID] enabled at IRQ 20
>Aug 30 14:08:03 alcor rpc.statd[1991]: Version 1.1.0 Starting
>Aug 30 14:08:03 alcor kernel: ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 20 (level, low) -> IRQ 20
>Aug 30 14:08:03 alcor kernel: sata_nv 0000:00:07.0: Using ADMA mode
>Aug 30 14:08:03 alcor kernel: scsi0 : sata_nv
>Aug 30 14:08:03 alcor kernel: scsi1 : sata_nv
>Aug 30 14:08:03 alcor kernel: ata1: SATA max UDMA/133 cmd 0xffffc200005e8480 ctl 0xffffc200005e84a0 bmdma 0x000000000001b800 irq 20
>Aug 30 14:08:03 alcor kernel: ata2: SATA max UDMA/133 cmd 0xffffc200005e8580 ctl 0xffffc200005e85a0 bmdma 0x000000000001b808 irq 20
>Aug 30 14:08:03 alcor kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>Aug 30 14:08:03 alcor kernel: usb 1-4: new low speed USB device using ohci_hcd and address 2
>Aug 30 14:08:03 alcor kernel: ata1.00: ATA-7: ST3160811AS, 3.AAE, max UDMA/133
>Aug 30 14:08:03 alcor kernel: ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
>Aug 30 14:08:03 alcor kernel: ata1.00: configured for UDMA/133
>Aug 30 14:08:03 alcor kernel: usb 1-4: configuration #1 chosen from 1 choice
>Aug 30 14:08:03 alcor kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>Aug 30 14:08:03 alcor kernel: ata2.00: ATA-7: ST3750640NS, 3.AEE, max UDMA/133
>Aug 30 14:08:03 alcor kernel: ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>Aug 30 14:08:03 alcor kernel: ata2.00: configured for UDMA/133
>Aug 30 14:08:03 alcor kernel: scsi 0:0:0:0: Direct-Access     ATA      ST3160811AS      3.AA PQ: 0 ANSI: 5
>Aug 30 14:08:03 alcor kernel: ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>Aug 30 14:08:03 alcor kernel: sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>Aug 30 14:08:03 alcor kernel: sd 0:0:0:0: [sda] Write Protect is off
>Aug 30 14:08:03 alcor kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Aug 30 14:08:03 alcor kernel: sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>Aug 30 14:08:03 alcor kernel: sd 0:0:0:0: [sda] Write Protect is off
>Aug 30 14:08:03 alcor kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Aug 30 14:08:03 alcor kernel:  sda: sda1 sda2
>Aug 30 14:08:03 alcor kernel: sd 0:0:0:0: [sda] Attached SCSI disk
>Aug 30 14:08:03 alcor kernel: scsi 1:0:0:0: Direct-Access     ATA      ST3750640NS      3.AE PQ: 0 ANSI: 5
>Aug 30 14:08:03 alcor kernel: ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>Aug 30 14:08:03 alcor kernel: sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
>Aug 30 14:08:03 alcor kernel: sd 1:0:0:0: [sdb] Write Protect is off
>Aug 30 14:08:03 alcor kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Aug 30 14:08:03 alcor kernel: sd 1:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB)
>Aug 30 14:08:03 alcor kernel: sd 1:0:0:0: [sdb] Write Protect is off
>Aug 30 14:08:03 alcor kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Aug 30 14:08:03 alcor kernel:  sdb: sdb1
>Aug 30 14:08:03 alcor kernel: sd 1:0:0:0: [sdb] Attached SCSI disk
>Aug 30 14:08:03 alcor kernel: ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 22
>Aug 30 14:08:03 alcor kernel: ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LTIE] -> GSI 22 (level, low) -> IRQ 22
>Aug 30 14:08:03 alcor kernel: sata_nv 0000:00:08.0: Using ADMA mode
>Aug 30 14:08:03 alcor kernel: scsi2 : sata_nv
>Aug 30 14:08:03 alcor kernel: scsi3 : sata_nv
>Aug 30 14:08:03 alcor kernel: ata3: SATA max UDMA/133 cmd 0xffffc200005ea480 ctl 0xffffc200005ea4a0 bmdma 0x000000000001a400 irq 22
>Aug 30 14:08:03 alcor kernel: ata4: SATA max UDMA/133 cmd 0xffffc200005ea580 ctl 0xffffc200005ea5a0 bmdma 0x000000000001a408 irq 22
>Aug 30 14:08:03 alcor kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>Aug 30 14:08:03 alcor kernel: ata3.00: ATA-7: ST3750640NS, 3.AEE, max UDMA/133
>Aug 30 14:08:03 alcor kernel: ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>Aug 30 14:08:03 alcor kernel: ata3.00: configured for UDMA/133
>Aug 30 14:08:03 alcor kernel: hiddev96: USB HID v1.10 Device [American Power Conversion Smart-UPS 1500 RM FW:617.3.D USB FW:8.1] on usb-0000:00:02.0-4
>Aug 30 14:08:03 alcor kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>Aug 30 14:08:03 alcor kernel: ata4.00: ATA-7: ST3750640NS, 3.AEG, max UDMA/133
>Aug 30 14:08:03 alcor kernel: ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>Aug 30 14:08:03 alcor kernel: ata4.00: configured for UDMA/133
>Aug 30 14:08:03 alcor kernel: scsi 2:0:0:0: Direct-Access     ATA      ST3750640NS      3.AE PQ: 0 ANSI: 5
>Aug 30 14:08:03 alcor kernel: ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>Aug 30 14:08:03 alcor kernel: sd 2:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB)
>Aug 30 14:08:03 alcor kernel: sd 2:0:0:0: [sdc] Write Protect is off
>Aug 30 14:08:03 alcor kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Aug 30 14:08:03 alcor kernel: sd 2:0:0:0: [sdc] 1465149168 512-byte hardware sectors (750156 MB)
>Aug 30 14:08:03 alcor kernel: sd 2:0:0:0: [sdc] Write Protect is off
>Aug 30 14:08:03 alcor kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Aug 30 14:08:03 alcor kernel:  sdc: sdc1
>Aug 30 14:08:03 alcor kernel: sd 2:0:0:0: [sdc] Attached SCSI disk
>Aug 30 14:08:03 alcor kernel: scsi 3:0:0:0: Direct-Access     ATA      ST3750640NS      3.AE PQ: 0 ANSI: 5
>Aug 30 14:08:03 alcor kernel: ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>Aug 30 14:08:03 alcor kernel: sd 3:0:0:0: [sdd] 1465149168 512-byte hardware sectors (750156 MB)
>Aug 30 14:08:03 alcor kernel: sd 3:0:0:0: [sdd] Write Protect is off
>Aug 30 14:08:03 alcor kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Aug 30 14:08:03 alcor kernel: sd 3:0:0:0: [sdd] 1465149168 512-byte hardware sectors (750156 MB)
>Aug 30 14:08:03 alcor kernel: sd 3:0:0:0: [sdd] Write Protect is off
>Aug 30 14:08:03 alcor kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Aug 30 14:08:03 alcor kernel:  sdd: sdd1
>Aug 30 14:08:03 alcor kernel: sd 3:0:0:0: [sdd] Attached SCSI disk
>Aug 30 14:08:03 alcor kernel: ACPI: PCI Interrupt Link [LT3D] enabled at IRQ 47
>Aug 30 14:08:03 alcor kernel: ACPI: PCI Interrupt 0000:80:07.0[A] -> Link [LT3D] -> GSI 47 (level, low) -> IRQ 47
>Aug 30 14:08:03 alcor kernel: sata_nv 0000:80:07.0: Using ADMA mode
>Aug 30 14:08:03 alcor kernel: PCI: Unable to reserve mem region #6:1000@dfefe000 for device 0000:80:07.0
>Aug 30 14:08:03 alcor kernel: ACPI: PCI interrupt for device 0000:80:07.0 disabled
>Aug 30 14:08:03 alcor kernel: sata_nv: probe of 0000:80:07.0 failed with error -16
>Aug 30 14:08:03 alcor sm-notify[1993]: sm-notify running as root. chown /var/lib/nfs/sm to choose different user 
>Aug 30 14:08:03 alcor kernel: ACPI: PCI Interrupt Link [LT2E] enabled at IRQ 46
>Aug 30 14:08:03 alcor kernel: ACPI: PCI Interrupt 0000:80:08.0[A] -> Link [LT2E] -> GSI 46 (level, low) -> IRQ 46
>Aug 30 14:08:03 alcor kernel: sata_nv 0000:80:08.0: Using ADMA mode
>Aug 30 14:08:03 alcor kernel: PCI: Unable to reserve mem region #6:1000@dfefd000 for device 0000:80:08.0
>Aug 30 14:08:03 alcor kernel: ACPI: PCI interrupt for device 0000:80:08.0 disabled
>Aug 30 14:08:03 alcor kernel: sata_nv: probe of 0000:80:08.0 failed with error -16
>Aug 30 14:08:03 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 3
>Aug 30 14:08:03 alcor kernel: usb 1-6: device descriptor read/64, error -62
>Aug 30 14:08:03 alcor kernel: usb 1-6: device descriptor read/64, error -62
>Aug 30 14:08:03 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 4
>Aug 30 14:08:03 alcor kernel: usb 1-6: device descriptor read/64, error -62
>Aug 30 14:08:03 alcor kernel: usb 1-6: device descriptor read/64, error -62
>Aug 30 14:08:03 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 5
>Aug 30 14:08:03 alcor kernel: usb 1-6: device not accepting address 5, error -62
>Aug 30 14:08:03 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 6
>Aug 30 14:08:03 alcor kernel: device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>Aug 30 14:08:03 alcor kernel: usb 1-6: device not accepting address 6, error -62
>Aug 30 14:08:03 alcor kernel: kjournald starting.  Commit interval 5 seconds
>Aug 30 14:08:03 alcor kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Aug 30 14:08:03 alcor kernel: SELinux:  Disabled at runtime.
>Aug 30 14:08:03 alcor kernel: audit(1188482859.358:2): selinux=0 auid=4294967295
>Aug 30 14:08:03 alcor kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
>Aug 30 14:08:03 alcor kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
>Aug 30 14:08:03 alcor kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0
>Aug 30 14:08:03 alcor kernel: sd 3:0:0:0: Attached scsi generic sg3 type 0
>Aug 30 14:08:03 alcor kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>Aug 30 14:08:03 alcor kernel: ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 21
>Aug 30 14:08:03 alcor kernel: ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LKLN] -> GSI 21 (level, low) -> IRQ 21
>Aug 30 14:08:03 alcor kernel: forcedeth: using HIGHDMA
>Aug 30 14:08:03 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 7
>Aug 30 14:08:03 alcor kernel: ck804xrom ck804xrom_init_one(): Unable to register resource 0x00000000ffc00000-0x00000000ffffffff - kernel bug?
>Aug 30 14:08:03 alcor kernel: eth0: forcedeth.c: subsystem: 015d9:1011 bound to 0000:00:0a.0
>Aug 30 14:08:03 alcor kernel: ACPI: PCI Interrupt Link [LK2N] enabled at IRQ 45
>Aug 30 14:08:03 alcor kernel: ACPI: PCI Interrupt 0000:80:0a.0[A] -> Link [LK2N] -> GSI 45 (level, low) -> IRQ 45
>Aug 30 14:08:03 alcor kernel: forcedeth: using HIGHDMA
>Aug 30 14:08:03 alcor kernel: scsi4 : pata_amd
>Aug 30 14:08:03 alcor kernel: scsi5 : pata_amd
>Aug 30 14:08:03 alcor kernel: ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000013000 irq 14
>Aug 30 14:08:03 alcor kernel: ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000013008 irq 15
>Aug 30 14:08:03 alcor kernel: rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>Aug 30 14:08:03 alcor kernel: rtc0: alarms up to one year, y3k
>Aug 30 14:08:03 alcor kernel: Found: PMC Pm49FL004
>Aug 30 14:08:03 alcor kernel: ck804xrom @fff80000: Found 1 x8 devices at 0x0 in 8-bit bank
>Aug 30 14:08:03 alcor kernel: i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
>Aug 30 14:08:03 alcor kernel: i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
>Aug 30 14:08:03 alcor kernel: parport_pc 00:08: reported by Plug and Play ACPI
>Aug 30 14:08:03 alcor kernel: parport0: PC-style at 0x378, irq 7 [PCSPP]
>Aug 30 14:08:03 alcor kernel: number of JEDEC chips: 1
>Aug 30 14:08:03 alcor kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
>Aug 30 14:08:03 alcor kernel: eth1: forcedeth.c: subsystem: 015d9:1011 bound to 0000:80:0a.0
>Aug 30 14:08:03 alcor kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Aug 30 14:08:03 alcor kernel: ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20
>Aug 30 14:08:03 alcor kernel: ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LAUI] -> GSI 20 (level, low) -> IRQ 20
>Aug 30 14:08:03 alcor kernel: hub 1-0:1.0: Cannot enable port 6.  Maybe the USB cable is bad?
>Aug 30 14:08:03 alcor kernel: intel8x0_measure_ac97_clock: measured 50764 usecs
>Aug 30 14:08:03 alcor kernel: intel8x0: clocking to 46859
>Aug 30 14:08:03 alcor kernel: FDC 0 is a post-1991 82077
>Aug 30 14:08:03 alcor kernel: hub 1-0:1.0: Cannot enable port 6.  Maybe the USB cable is bad?
>Aug 30 14:08:03 alcor kernel: No dock devices found.
>Aug 30 14:08:03 alcor kernel: input: Power Button (FF) as /class/input/input2
>Aug 30 14:08:03 alcor kernel: ACPI: Power Button (FF) [PWRF]
>Aug 30 14:08:03 alcor kernel: input: Power Button (CM) as /class/input/input3
>Aug 30 14:08:03 alcor kernel: ACPI: Power Button (CM) [PWRB]
>Aug 30 14:08:03 alcor kernel: hub 1-0:1.0: Cannot enable port 6.  Maybe the USB cable is bad?
>Aug 30 14:08:03 alcor kernel: hub 1-0:1.0: Cannot enable port 6.  Maybe the USB cable is bad?
>Aug 30 14:08:03 alcor kernel: EXT3 FS on dm-0, internal journal
>Aug 30 14:08:03 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 11
>Aug 30 14:08:03 alcor kernel: kjournald starting.  Commit interval 5 seconds
>Aug 30 14:08:03 alcor kernel: EXT3 FS on sda1, internal journal
>Aug 30 14:08:03 alcor kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Aug 30 14:08:03 alcor kernel: usb 1-6: device descriptor read/64, error -62
>Aug 30 14:08:03 alcor kernel: usb 1-6: device descriptor read/64, error -62
>Aug 30 14:08:03 alcor kernel: Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>Aug 30 14:08:03 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 12
>Aug 30 14:08:03 alcor kernel: usb 1-6: device descriptor read/64, error -62
>Aug 30 14:08:03 alcor kernel: usb 1-6: device descriptor read/64, error -62
>Aug 30 14:08:03 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 13
>Aug 30 14:08:03 alcor kernel: usb 1-6: device not accepting address 13, error -62
>Aug 30 14:08:03 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 14
>Aug 30 14:08:03 alcor kernel: usb 1-6: device not accepting address 14, error -62
>Aug 30 14:08:03 alcor kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
>Aug 30 14:08:03 alcor kernel: Netfilter messages via NETLINK v0.30.
>Aug 30 14:08:03 alcor kernel: nf_conntrack version 0.5.0 (4095 buckets, 32760 max)
>Aug 30 14:08:03 alcor kernel: NET: Registered protocol family 10
>Aug 30 14:08:03 alcor kernel: lo: Disabled Privacy Extensions
>Aug 30 14:08:03 alcor kernel: Mobile IPv6
>Aug 30 14:08:04 alcor hcid[2073]: Bluetooth HCI daemon
>Aug 30 14:08:04 alcor sdpd[2079]: Bluetooth SDP daemon
>Aug 30 14:08:04 alcor sdpd[2079]: Starting SDP server
>Aug 30 14:08:04 alcor kernel: Bluetooth: Core ver 2.11
>Aug 30 14:08:04 alcor kernel: NET: Registered protocol family 31
>Aug 30 14:08:04 alcor kernel: Bluetooth: HCI device and connection manager initialized
>Aug 30 14:08:04 alcor kernel: Bluetooth: HCI socket layer initialized
>Aug 30 14:08:04 alcor input[2091]: Bluetooth Input daemon
>Aug 30 14:08:04 alcor input[2091]: Registered input manager path:/org/bluez/input
>Aug 30 14:08:04 alcor input[2091]: Bluetooth device not available
>Aug 30 14:08:04 alcor input[2091]: Unable to get on D-Bus
>Aug 30 14:08:04 alcor kernel: Bluetooth: L2CAP ver 2.8
>Aug 30 14:08:04 alcor kernel: Bluetooth: L2CAP socket layer initialized
>Aug 30 14:08:04 alcor kernel: Bluetooth: RFCOMM socket layer initialized
>Aug 30 14:08:04 alcor kernel: Bluetooth: RFCOMM TTY layer initialized
>Aug 30 14:08:04 alcor kernel: Bluetooth: RFCOMM ver 1.8
>Aug 30 14:08:04 alcor kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>Aug 30 14:08:04 alcor hidd[2158]: Bluetooth HID daemon
>Aug 30 14:08:05 alcor automount[2183]: lookup_init: lookup(ldap): failed to get query dn
>Aug 30 14:08:05 alcor smartd[2206]: smartd version 5.37 [x86_64-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen 
>Aug 30 14:08:05 alcor smartd[2206]: Home page is http://smartmontools.sourceforge.net/  
>Aug 30 14:08:05 alcor smartd[2206]: Opened configuration file /etc/smartd.conf 
>Aug 30 14:08:05 alcor smartd[2206]: Configuration file /etc/smartd.conf parsed. 
>Aug 30 14:08:05 alcor smartd[2206]: Device: /dev/sda, opened 
>Aug 30 14:08:05 alcor smartd[2206]: Device: /dev/sda, not found in smartd database. 
>Aug 30 14:08:05 alcor smartd[2206]: Device: /dev/sda, is SMART capable. Adding to "monitor" list. 
>Aug 30 14:08:05 alcor smartd[2206]: Device: /dev/sdb, opened 
>Aug 30 14:08:05 alcor smartd[2206]: Device: /dev/sdb, not found in smartd database. 
>Aug 30 14:08:05 alcor smartd[2206]: Device: /dev/sdb, is SMART capable. Adding to "monitor" list. 
>Aug 30 14:08:05 alcor smartd[2206]: Device: /dev/sdc, opened 
>Aug 30 14:08:05 alcor smartd[2206]: Device: /dev/sdc, not found in smartd database. 
>Aug 30 14:08:05 alcor smartd[2206]: Device: /dev/sdc, is SMART capable. Adding to "monitor" list. 
>Aug 30 14:08:05 alcor smartd[2206]: Device: /dev/sdd, opened 
>Aug 30 14:08:05 alcor smartd[2206]: Device: /dev/sdd, not found in smartd database. 
>Aug 30 14:08:05 alcor smartd[2206]: Device: /dev/sdd, is SMART capable. Adding to "monitor" list. 
>Aug 30 14:08:06 alcor smartd[2206]: Device: /dev/sde, No such device, open() failed 
>Aug 30 14:08:06 alcor smartd[2206]: Unable to register ATA device /dev/sde at line 34 of file /etc/smartd.conf 
>Aug 30 14:08:06 alcor smartd[2206]: Device /dev/sde not available 
>Aug 30 14:08:06 alcor smartd[2206]: Monitoring 4 ATA and 0 SCSI devices 
>Aug 30 14:08:06 alcor smartd[2208]: smartd has fork()ed into background mode. New PID=2208. 
>Aug 30 14:08:06 alcor hpiod: 1.7.4a accepting connections at 2208... 
>Aug 30 14:08:07 alcor xinetd[2298]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in.
>Aug 30 14:08:07 alcor xinetd[2298]: Started working: 1 available service
>Aug 30 14:08:07 alcor ntpd[2316]: ntpd 4.2.4p2@1.1495-o Thu Jun 21 10:50:45 UTC 2007 (1)
>Aug 30 14:08:07 alcor ntpd[2317]: precision = 1.000 usec
>Aug 30 14:08:07 alcor ntpd[2317]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
>Aug 30 14:08:07 alcor ntpd[2317]: Listening on interface #1 wildcard, ::#123 Disabled
>Aug 30 14:08:07 alcor ntpd[2317]: Listening on interface #2 eth0, fe80::230:48ff:fe5a:960c#123 Enabled
>Aug 30 14:08:07 alcor ntpd[2317]: Listening on interface #3 eth1, fe80::230:48ff:fe5a:960d#123 Enabled
>Aug 30 14:08:07 alcor ntpd[2317]: Listening on interface #4 lo, ::1#123 Enabled
>Aug 30 14:08:07 alcor ntpd[2317]: Listening on interface #5 lo, 127.0.0.1#123 Enabled
>Aug 30 14:08:07 alcor ntpd[2317]: Listening on interface #6 eth0, 146.189.76.60#123 Enabled
>Aug 30 14:08:07 alcor ntpd[2317]: Listening on interface #7 eth1, 10.0.0.21#123 Enabled
>Aug 30 14:08:07 alcor ntpd[2317]: kernel time sync status 0040
>Aug 30 14:08:07 alcor ntpd[2317]: frequency initialized -26.014 PPM from /var/lib/ntp/drift
>Aug 30 14:08:08 alcor kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>Aug 30 14:08:08 alcor kernel: NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>Aug 30 14:08:08 alcor kernel: NFSD: starting 90-second grace period
>Aug 30 14:08:08 alcor gpm[2486]: *** info [startup.c(95)]: 
>Aug 30 14:08:08 alcor gpm[2486]: Started gpm successfully. Entered daemon mode.
>Aug 30 14:08:10 alcor avahi-daemon[2695]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
>Aug 30 14:08:10 alcor avahi-daemon[2695]: Successfully dropped root privileges.
>Aug 30 14:08:10 alcor avahi-daemon[2695]: avahi-daemon 0.6.17 starting up.
>Aug 30 14:08:10 alcor avahi-daemon[2695]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
>Aug 30 14:08:10 alcor avahi-daemon[2695]: Successfully called chroot().
>Aug 30 14:08:10 alcor avahi-daemon[2695]: Successfully dropped remaining capabilities.
>Aug 30 14:08:10 alcor avahi-daemon[2695]: Loading service file /services/sftp-ssh.service.
>Aug 30 14:08:10 alcor avahi-daemon[2695]: Joining mDNS multicast group on interface eth1.IPv6 with address fe80::230:48ff:fe5a:960d.
>Aug 30 14:08:10 alcor avahi-daemon[2695]: New relevant interface eth1.IPv6 for mDNS.
>Aug 30 14:08:10 alcor avahi-daemon[2695]: Joining mDNS multicast group on interface eth1.IPv4 with address 10.0.0.21.
>Aug 30 14:08:10 alcor avahi-daemon[2695]: New relevant interface eth1.IPv4 for mDNS.
>Aug 30 14:08:10 alcor avahi-daemon[2695]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::230:48ff:fe5a:960c.
>Aug 30 14:08:10 alcor avahi-daemon[2695]: New relevant interface eth0.IPv6 for mDNS.
>Aug 30 14:08:10 alcor avahi-daemon[2695]: Joining mDNS multicast group on interface eth0.IPv4 with address 146.189.76.60.
>Aug 30 14:08:10 alcor avahi-daemon[2695]: New relevant interface eth0.IPv4 for mDNS.
>Aug 30 14:08:10 alcor avahi-daemon[2695]: Network interface enumeration completed.
>Aug 30 14:08:10 alcor avahi-daemon[2695]: Registering new address record for fe80::230:48ff:fe5a:960d on eth1.*.
>Aug 30 14:08:10 alcor avahi-daemon[2695]: Registering new address record for 10.0.0.21 on eth1.IPv4.
>Aug 30 14:08:10 alcor avahi-daemon[2695]: Registering new address record for fe80::230:48ff:fe5a:960c on eth0.*.
>Aug 30 14:08:10 alcor avahi-daemon[2695]: Registering new address record for 146.189.76.60 on eth0.IPv4.
>Aug 30 14:08:10 alcor avahi-daemon[2695]: Registering HINFO record with values 'X86_64'/'LINUX'.
>Aug 30 14:08:10 alcor apcupsd[2343]: apcupsd 3.14.1 (04 May 2007) redhat startup succeeded
>Aug 30 14:08:11 alcor avahi-daemon[2695]: Server startup complete. Host name is alcor.local. Local service cookie is 3472542080.
>Aug 30 14:08:12 alcor avahi-daemon[2695]: Service "SFTP File Transfer on alcor" (/services/sftp-ssh.service) successfully established.
>Aug 30 14:08:13 alcor apcupsd[2343]: NIS server startup succeeded
>Aug 30 14:11:25 alcor ntpd[2317]: synchronized to LOCAL(0), stratum 10
>Aug 30 14:11:25 alcor ntpd[2317]: kernel time sync status change 0001
>Aug 30 14:12:29 alcor ntpd[2317]: synchronized to 146.189.195.105, stratum 2

Actions: View

Attachments on bug 280641: 188831 | 189881 | 189891 | 189901 | 192761 | 192771 | 192931 | 194851 | 291534 | 297065 | 306040