Attachment 189101 Details for Bug 253538 – Serial console output for failing boot

Serial console output for failing boot

serial.txt (text/plain), 8.10 KB, created by Chris Lalancette on 2007-09-06 18:30:30 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Chris Lalancette

Created: 2007-09-06 18:30:30 UTC

Size: 8.10 KB

patch

obsolete

>Linux version 2.6.9-57.ELsmp (brewbuilder@hs20-bc1-5.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-8)) #1 SMP Tue Aug 28 17:30:44 EDT 2007
>
BIOS-provided physical RAM map:
>
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
>
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
>
 BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
>
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
>
 BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
>
 BIOS-e820: 000000001fef0000 - 000000001feff000 (ACPI data)
>
 BIOS-e820: 000000001feff000 - 000000001ff00000 (ACPI NVS)
>
 BIOS-e820: 000000001ff00000 - 0000000020000000 (usable)
>
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
>
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>
 BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
>
0MB HIGHMEM available.
>
512MB LOWMEM available.
>
found SMP MP-table at 000f6ce0
>
NX (Execute Disable) protection: active
>
DMI present.
>
Using APIC driver default
>
ACPI: PM-Timer IO Port: 0x1008
>
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>
Processor #0 15:3 APIC version 17
>
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>
Processor #1 15:3 APIC version 17
>
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>
Enabling APIC mode:  Flat.  Using 0 I/O APICs
>
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>
Using ACPI (MADT) for SMP configuration information
>
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
>
Built 1 zonelists
>
Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS0,57600 console=tty0
>
Initializing CPU#0
>
CPU 0 irqstacks, hard=c03f5000 soft=c03d5000
>
PID hash table entries: 4096 (order: 12, 65536 bytes)
>
Detected 2598.188 MHz processor.
>
Using pmtmr for high-res timesource
>
Console: colour VGA+ 80x25
>
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>
Memory: 512688k/524288k available (1892k kernel code, 11016k reserved, 764k data, 192k init, 0k highmem)
>
Calibrating delay using timer specific routine.. 5206.11 BogoMIPS (lpj=2603059)
>
Security Scaffold v1.0.0 initialized
>
SELinux:  Initializing.
>
There is already a security framework initialized, register_security failed.
>
selinux_register_security:  Registering secondary module capability
>
Capability LSM initialized as secondary
>
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>
CPU: L2 Cache: 1024K (64 bytes/line)
>
Intel machine check architecture supported.
>
Intel machine check reporting enabled on CPU#0.
>
Enabling fast FPU save and restore... done.
>
Enabling unmasked SIMD FPU exception support... done.
>
Checking 'hlt' instruction... OK.
>
CPU0: AMD Dual-Core AMD Opteron(tm) Processor 1218 stepping 03
>
per-CPU timeslice cutoff: 2924.67 usecs.
>
task migration cache decay timeout: 2 msecs.
>
Booting processor 1/1 eip 3000
>
CPU 1 irqstacks, hard=c03f6000 soft=c03d6000
>
Initializing CPU#1
>
Calibrating delay using timer specific routine.. 5296.90 BogoMIPS (lpj=2648450)
>
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>
CPU: L2 Cache: 1024K (64 bytes/line)
>
Intel machine check architecture supported.
>
Intel machine check reporting enabled on CPU#1.
>
CPU1: AMD Dual-Core AMD Opteron(tm) Processor 1218 stepping 03
>
Total of 2 processors activated (10503.01 BogoMIPS).
>
ENABLING IO-APIC IRQs
>
..TIMER: vector=0x31 pin1=2 pin2=-1
>
checking TSC synchronization across 2 CPUs: passed.
>
Brought up 2 CPUs
>
zapping low mappings.
>
checking if image is initramfs... it is
>
Freeing initrd memory: 1390k freed
>
NET: Registered protocol family 16
>
PCI: PCI BIOS revision 2.10 entry at 0xfd9a0, last bus=1
>
PCI: Using configuration type 1
>
mtrr: v2.0 (20020519)
>
ACPI: Subsystem revision 20040816
>
ACPI: Interpreter enabled
>
ACPI: Using IOAPIC for interrupt routing
>
ACPI: PCI Root Bridge [PCI0] (00:00)
>
PCI: Probing PCI hardware (bus 00)
>
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
>
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 14 15)
>
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 14 15)
>
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
>
Linux Plug and Play Support v0.97 (c) Adam Belay
>
usbcore: registered new driver usbfs
>
usbcore: registered new driver hub
>
PCI: Using ACPI for IRQ routing
>
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 169
>
ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 18 (level, low) -> IRQ 177
>
PCI: Cannot allocate resource region 4 of device 0000:00:07.1
>
Simple Boot Flag at 0x36 set to 0x80
>
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>
apm: disabled - APM is not SMP safe.
>
audit: initializing netlink socket (disabled)
>
audit(1189003685.675:1): initialized
>
Total HugeTLB memory allocated, 0
>
VFS: Disk quotas dquot_6.5.1
>
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>
Initializing Cryptographic API
>
ksign: Installing public key data
>
Loading keyring
>
- Added public key 2E8CEF41A4ED6DA1
>
- User ID: Red Hat, Inc. (Kernel Module GPG key)
>
Limiting direct PCI/PCI transfers.
>
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>
ACPI: Processor [CPU0] (supports C1, 8 throttling states)
>
ACPI: Processor [CPU1] (supports C1, 8 throttling states)
>
Real Time Clock Driver v1.12
>
Linux agpgart interface v0.100 (c) Dave Jones
>
agpgart: Detected an Intel 440BX Chipset.
>
agpgart: Maximum main memory to use for agp memory: 440M
>
agpgart: AGP aperture is 64M @ 0xe8000000
>
serio: i8042 AUX port at 0x60,0x64 irq 12
>
serio: i8042 KBD port at 0x60,0x64 irq 1
>
Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
>
ÿttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>
PIIX4: IDE controller at PCI slot 0000:00:07.1
>
PIIX4: chipset revision 1
>
PIIX4: not 100% native mode: will probe irqs later
>
    ide1: BM-DMA at 0x1078-0x107f, BIOS settings: hdc:DMA, hdd:pio
>
hdc: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive
>
Using cfq io scheduler
>
ide1 at 0x170-0x177,0x376 on irq 15
>
hdc: ATAPI 48X DVD-ROM drive, 1727kB Cache, UDMA(33)
>
Uniform CD-ROM driver Revision: 3.20
>
ATAPI device hdc:
>
  Error: Not ready -- (Sense key=0x02)
>
  (reserved error code) -- (asc=0x00, ascq=0x00)
>
  The failed "Read Cd/Dvd Capacity" packet command was: 
>
  "25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "
>
ide-floppy driver 0.99.newide
>
usbcore: registered new driver hiddev
>
usbcore: registered new driver usbhid
>
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>
mice: PS/2 mouse device common for all mice
>
input: AT Translated Set 2 keyboard on isa0060/serio0
>
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
>
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>
NET: Registered protocol family 2
>
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>
TCP bind hash table entries: 131072 (order: 8, 1572864 bytes)
>
TCP: Hash tables configured (established 131072 bind 131072)
>
Initializing IPsec netlink socket
>
NET: Registered protocol family 1
>
NET: Registered protocol family 17
>
ACPI wakeup devices: 
>
 USB 
>
ACPI: (supports S0 S1 S5)
>
Freeing unused kernel memory: 192k freed
>
SCSI subsystem initialized
>
Fusion MPT base driver 3.02.99.00rh
>
Copyright (c) 1999-2007 LSI Logic Corporation
>
Fusion MPT SPI Host driver 3.02.99.00rh
>
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 169
>
mptbase: Initiating ioc0 bringup
>
ioc0: 53C1030: Capabilities={Initiator}
>
scsi0 : ioc0: LSI53C1030, FwRev=00000000h, Ports=1, MaxQ=128, IRQ=169
>
Fusion MPT SAS Host driver 3.02.99.00rh
>
device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
>
cdrom: open failed.
>
cdrom: open failed.
>
Kernel panic - not syncing: Attempted to kill init!
>

Actions: View

Attachments on bug 253538: 189101 | 191831 | 196621 | 207501