Attachment 189901 Details for Bug 280641 – /var/log/message from booting a 2.6.20 kernel

/var/log/message from booting a 2.6.20 kernel

alcor.messages.2.6.20-1.2933.fc6.txt (text/plain), 40.49 KB, created by Karl Bellve on 2007-09-07 13:13:31 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Karl Bellve

Created: 2007-09-07 13:13:31 UTC

Size: 40.49 KB

patch

obsolete

>Sep  7 09:07:08 alcor syslogd 1.4.2: restart.
>Sep  7 09:07:08 alcor kernel: klogd 1.4.2, log source = /proc/kmsg started.
>Sep  7 09:07:08 alcor kernel: Linux version 2.6.20-1.2933.fc6 (brewbuilder@hs20-bc1-5.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Mon Mar 19 11:00:19 EDT 2007
>Sep  7 09:07:08 alcor kernel: Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Sep  7 09:07:08 alcor kernel: BIOS-provided physical RAM map:
>Sep  7 09:07:08 alcor kernel:  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>Sep  7 09:07:08 alcor kernel:  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>Sep  7 09:07:08 alcor kernel:  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
>Sep  7 09:07:08 alcor kernel:  BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
>Sep  7 09:07:08 alcor kernel:  BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)
>Sep  7 09:07:08 alcor kernel:  BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)
>Sep  7 09:07:08 alcor kernel:  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>Sep  7 09:07:08 alcor kernel:  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>Sep  7 09:07:08 alcor kernel:  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>Sep  7 09:07:08 alcor kernel: end_pfn_map = 1048576
>Sep  7 09:07:08 alcor kernel: DMI 2.3 present.
>Sep  7 09:07:08 alcor kernel: Scanning NUMA topology in Northbridge 24
>Sep  7 09:07:08 alcor kernel: Number of nodes 1
>Sep  7 09:07:08 alcor kernel: Node 0 MemBase 0000000000000000 Limit 000000003ffd0000
>Sep  7 09:07:08 alcor kernel: Using node hash shift of 63
>Sep  7 09:07:09 alcor kernel: Bootmem setup node 0 0000000000000000-000000003ffd0000
>Sep  7 09:07:09 alcor kernel: Zone PFN ranges:
>Sep  7 09:07:09 alcor kernel:   DMA             0 ->     4096
>Sep  7 09:07:09 alcor kernel:   DMA32        4096 ->  1048576
>Sep  7 09:07:09 alcor kernel:   Normal    1048576 ->  1048576
>Sep  7 09:07:09 alcor kernel: early_node_map[2] active PFN ranges
>Sep  7 09:07:09 alcor kernel:     0:        0 ->      159
>Sep  7 09:07:09 alcor kernel:     0:      256 ->   262096
>Sep  7 09:07:09 alcor kernel: Nvidia board detected. Ignoring ACPI timer override.
>Sep  7 09:07:09 alcor kernel: If you got timer trouble try acpi_use_timer_override
>Sep  7 09:07:09 alcor kernel: ACPI: PM-Timer IO Port: 0x4008
>Sep  7 09:07:09 alcor kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Sep  7 09:07:09 alcor kernel: Processor #0 (Bootup-CPU)
>Sep  7 09:07:09 alcor kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>Sep  7 09:07:09 alcor kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>Sep  7 09:07:09 alcor kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>Sep  7 09:07:09 alcor kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>Sep  7 09:07:09 alcor kernel: IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>Sep  7 09:07:09 alcor kernel: ACPI: IOAPIC (id[0x02] address[0xdfefc000] gsi_base[24])
>Sep  7 09:07:09 alcor kernel: IOAPIC[1]: apic_id 2, address 0xdfefc000, GSI 24-47
>Sep  7 09:07:09 alcor kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>Sep  7 09:07:09 alcor kernel: ACPI: BIOS IRQ0 pin2 override ignored.
>Sep  7 09:07:09 alcor kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Sep  7 09:07:09 alcor kernel: Setting APIC routing to physical flat
>Sep  7 09:07:09 alcor kernel: Using ACPI (MADT) for SMP configuration information
>Sep  7 09:07:09 alcor kernel: Nosave address range: 000000000009f000 - 00000000000a0000
>Sep  7 09:07:09 alcor kernel: Nosave address range: 00000000000a0000 - 00000000000e6000
>Sep  7 09:07:09 alcor kernel: Nosave address range: 00000000000e6000 - 0000000000100000
>Sep  7 09:07:09 alcor kernel: Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>Sep  7 09:07:09 alcor kernel: SMP: Allowing 4 CPUs, 3 hotplug CPUs
>Sep  7 09:07:09 alcor kernel: PERCPU: Allocating 43264 bytes of per cpu data
>Sep  7 09:07:09 alcor kernel: Built 1 zonelists.  Total pages: 256582
>Sep  7 09:07:09 alcor kernel: Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Sep  7 09:07:09 alcor kernel: Initializing CPU#0
>Sep  7 09:07:09 alcor kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
>Sep  7 09:07:09 alcor kernel: Console: colour VGA+ 80x25
>Sep  7 09:07:09 alcor kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Sep  7 09:07:09 alcor kernel: Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Sep  7 09:07:09 alcor kernel: Checking aperture...
>Sep  7 09:07:09 alcor kernel: CPU 0: aperture @ c092000000 size 32 MB
>Sep  7 09:07:09 alcor kernel: Aperture too small (32 MB)
>Sep  7 09:07:09 alcor kernel: No AGP bridge found
>Sep  7 09:07:09 alcor kernel: Memory: 1020708k/1048384k available (2453k kernel code, 27288k reserved, 1459k data, 316k init)
>Sep  7 09:07:09 alcor kernel: Calibrating delay using timer specific routine.. 3601.11 BogoMIPS (lpj=1800555)
>Sep  7 09:07:09 alcor kernel: Security Framework v1.0.0 initialized
>Sep  7 09:07:09 alcor kernel: SELinux:  Initializing.
>Sep  7 09:07:09 alcor kernel: SELinux:  Starting in permissive mode
>Sep  7 09:07:09 alcor kernel: selinux_register_security:  Registering secondary module capability
>Sep  7 09:07:09 alcor kernel: Capability LSM initialized as secondary
>Sep  7 09:07:09 alcor kernel: Mount-cache hash table entries: 256
>Sep  7 09:07:09 alcor kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>Sep  7 09:07:09 alcor kernel: CPU: L2 Cache: 1024K (64 bytes/line)
>Sep  7 09:07:09 alcor kernel: CPU 0/0 -> Node 0
>Sep  7 09:07:09 alcor kernel: SMP alternatives: switching to UP code
>Sep  7 09:07:09 alcor kernel: ACPI: Core revision 20060707
>Sep  7 09:07:09 alcor kernel: Using local APIC timer interrupts.
>Sep  7 09:07:09 alcor kernel: result 12500102
>Sep  7 09:07:09 alcor kernel: Detected 12.500 MHz APIC timer.
>Sep  7 09:07:09 alcor kernel: Brought up 1 CPUs
>Sep  7 09:07:09 alcor kernel: time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>Sep  7 09:07:09 alcor kernel: time.c: Detected 1800.014 MHz processor.
>Sep  7 09:07:09 alcor kernel: NET: Registered protocol family 16
>Sep  7 09:07:09 alcor kernel: ACPI: bus type pci registered
>Sep  7 09:07:09 alcor kernel: PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>Sep  7 09:07:09 alcor kernel: PCI: Not using MMCONFIG.
>Sep  7 09:07:09 alcor kernel: PCI: Using configuration type 1
>Sep  7 09:07:09 alcor kernel: ACPI: Interpreter enabled
>Sep  7 09:07:09 alcor kernel: ACPI: Using IOAPIC for interrupt routing
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
>Sep  7 09:07:09 alcor kernel: 0000:00:06.0: cannot adjust BAR0 (not I/O)
>Sep  7 09:07:09 alcor kernel: 0000:00:06.0: cannot adjust BAR1 (not I/O)
>Sep  7 09:07:09 alcor kernel: 0000:00:06.0: cannot adjust BAR2 (not I/O)
>Sep  7 09:07:09 alcor kernel: 0000:00:06.0: cannot adjust BAR3 (not I/O)
>Sep  7 09:07:09 alcor kernel: PCI: Transparent bridge - 0000:00:09.0
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Root Bridge [PCIB] (0000:80)
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *9
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *9
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0, disabled.
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *9
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *11
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *9
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *9
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *5
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LN2A] (IRQs 40 41 42 43) *0, disabled.
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LN2B] (IRQs 40 41 42 43) *0, disabled.
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LN2C] (IRQs 40 41 42 43) *0, disabled.
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LN2D] (IRQs 40 41 42 43) *0, disabled.
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LK2N] (IRQs 44 45 46 47) *0, disabled.
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LT3D] (IRQs 44 45 46 47) *0, disabled.
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LT2E] (IRQs 44 45 46 47) *0, disabled.
>Sep  7 09:07:09 alcor kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
>Sep  7 09:07:09 alcor kernel: pnp: PnP ACPI init
>Sep  7 09:07:09 alcor kernel: pnp: PnP ACPI: found 16 devices
>Sep  7 09:07:09 alcor kernel: usbcore: registered new interface driver usbfs
>Sep  7 09:07:09 alcor kernel: usbcore: registered new interface driver hub
>Sep  7 09:07:09 alcor kernel: usbcore: registered new device driver usb
>Sep  7 09:07:09 alcor kernel: PCI: Using ACPI for IRQ routing
>Sep  7 09:07:09 alcor kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>Sep  7 09:07:09 alcor kernel: NetLabel: Initializing
>Sep  7 09:07:09 alcor kernel: NetLabel:  domain hash size = 128
>Sep  7 09:07:09 alcor kernel: NetLabel:  protocols = UNLABELED CIPSOv4
>Sep  7 09:07:09 alcor kernel: NetLabel:  unlabeled traffic allowed by default
>Sep  7 09:07:09 alcor kernel: pnp: 00:0c: ioport range 0x680-0x6ff has been reserved
>Sep  7 09:07:09 alcor kernel: pnp: 00:0c: ioport range 0x295-0x296 has been reserved
>Sep  7 09:07:09 alcor kernel: pnp: 00:0c: ioport range 0x778-0x77f has been reserved
>Sep  7 09:07:09 alcor kernel: pnp: 00:0c: ioport range 0xb78-0xb7f has been reserved
>Sep  7 09:07:09 alcor kernel: pnp: 00:0c: ioport range 0xf78-0xf7f has been reserved
>Sep  7 09:07:09 alcor kernel: PCI: Bridge: 0000:00:09.0
>Sep  7 09:07:09 alcor kernel:   IO window: disabled.
>Sep  7 09:07:09 alcor kernel:   MEM window: disabled.
>Sep  7 09:07:09 alcor kernel:   PREFETCH window: disabled.
>Sep  7 09:07:09 alcor kernel: PCI: Bridge: 0000:00:0d.0
>Sep  7 09:07:09 alcor kernel:   IO window: disabled.
>Sep  7 09:07:09 alcor kernel:   MEM window: disabled.
>Sep  7 09:07:09 alcor kernel:   PREFETCH window: disabled.
>Sep  7 09:07:09 alcor kernel: PCI: Bridge: 0000:00:0e.0
>Sep  7 09:07:09 alcor kernel:   IO window: disabled.
>Sep  7 09:07:09 alcor kernel:   MEM window: bbb00000-bfbfffff
>Sep  7 09:07:09 alcor kernel:   PREFETCH window: bfd00000-dfcfffff
>Sep  7 09:07:09 alcor kernel: PCI: Bridge: 0000:80:0d.0
>Sep  7 09:07:09 alcor kernel:   IO window: disabled.
>Sep  7 09:07:09 alcor kernel:   MEM window: disabled.
>Sep  7 09:07:09 alcor kernel:   PREFETCH window: disabled.
>Sep  7 09:07:09 alcor kernel: PCI: Bridge: 0000:80:0e.0
>Sep  7 09:07:09 alcor kernel:   IO window: disabled.
>Sep  7 09:07:09 alcor kernel:   MEM window: disabled.
>Sep  7 09:07:09 alcor kernel:   PREFETCH window: disabled.
>Sep  7 09:07:09 alcor kernel: NET: Registered protocol family 2
>Sep  7 09:07:09 alcor kernel: IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>Sep  7 09:07:09 alcor kernel: TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>Sep  7 09:07:09 alcor kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>Sep  7 09:07:09 alcor kernel: TCP: Hash tables configured (established 131072 bind 65536)
>Sep  7 09:07:09 alcor kernel: TCP reno registered
>Sep  7 09:07:09 alcor kernel: checking if image is initramfs... it is
>Sep  7 09:07:09 alcor kernel: Freeing initrd memory: 3724k freed
>Sep  7 09:07:09 alcor kernel: audit: initializing netlink socket (disabled)
>Sep  7 09:07:09 alcor kernel: audit(1189155992.467:1): initialized
>Sep  7 09:07:09 alcor kernel: Total HugeTLB memory allocated, 0
>Sep  7 09:07:09 alcor kernel: VFS: Disk quotas dquot_6.5.1
>Sep  7 09:07:09 alcor kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Sep  7 09:07:09 alcor kernel: SELinux:  Registering netfilter hooks
>Sep  7 09:07:09 alcor kernel: ksign: Installing public key data
>Sep  7 09:07:09 alcor kernel: Loading keyring
>Sep  7 09:07:09 alcor kernel: - Added public key FDEFCFBED0141F2B
>Sep  7 09:07:09 alcor kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key)
>Sep  7 09:07:09 alcor kernel: io scheduler noop registered
>Sep  7 09:07:09 alcor kernel: io scheduler anticipatory registered
>Sep  7 09:07:09 alcor kernel: io scheduler deadline registered
>Sep  7 09:07:09 alcor kernel: io scheduler cfq registered (default)
>Sep  7 09:07:09 alcor kernel: PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
>Sep  7 09:07:09 alcor kernel: PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>Sep  7 09:07:09 alcor kernel: PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
>Sep  7 09:07:09 alcor kernel: PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>Sep  7 09:07:09 alcor kernel: PCI: Found disabled HT MSI Mapping on 0000:80:0d.0
>Sep  7 09:07:09 alcor kernel: PCI: Found disabled HT MSI Mapping on 0000:80:00.0
>Sep  7 09:07:09 alcor kernel: PCI: MSI quirk detected. MSI disabled on chipset 0000:80:0d.0.
>Sep  7 09:07:09 alcor kernel: PCI: Found disabled HT MSI Mapping on 0000:80:0e.0
>Sep  7 09:07:09 alcor kernel: PCI: Found disabled HT MSI Mapping on 0000:80:00.0
>Sep  7 09:07:09 alcor kernel: PCI: MSI quirk detected. MSI disabled on chipset 0000:80:0e.0.
>Sep  7 09:07:09 alcor kernel: assign_interrupt_mode Found MSI capability
>Sep  7 09:07:09 alcor last message repeated 3 times
>Sep  7 09:07:09 alcor kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Sep  7 09:07:09 alcor kernel: ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>Sep  7 09:07:09 alcor last message repeated 2 times
>Sep  7 09:07:09 alcor kernel: Real Time Clock Driver v1.12ac
>Sep  7 09:07:09 alcor kernel: Non-volatile memory driver v1.2
>Sep  7 09:07:09 alcor kernel: Linux agpgart interface v0.101 (c) Dave Jones
>Sep  7 09:07:09 alcor kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Sep  7 09:07:09 alcor kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Sep  7 09:07:09 alcor kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>Sep  7 09:07:09 alcor kernel: 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Sep  7 09:07:09 alcor kernel: 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>Sep  7 09:07:09 alcor kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Sep  7 09:07:09 alcor kernel: input: Macintosh mouse button emulation as /class/input/input0
>Sep  7 09:07:09 alcor kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>Sep  7 09:07:09 alcor kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Sep  7 09:07:09 alcor kernel: NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
>Sep  7 09:07:09 alcor kernel: NFORCE-CK804: chipset revision 242
>Sep  7 09:07:09 alcor kernel: NFORCE-CK804: not 100% native mode: will probe irqs later
>Sep  7 09:07:09 alcor kernel: NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
>Sep  7 09:07:09 alcor kernel:     ide0: BM-DMA at 0x3000-0x3007, BIOS settings: hda:DMA, hdb:DMA
>Sep  7 09:07:09 alcor kernel:     ide1: BM-DMA at 0x3008-0x300f, BIOS settings: hdc:DMA, hdd:DMA
>Sep  7 09:07:09 alcor kernel: ide-floppy driver 0.99.newide
>Sep  7 09:07:09 alcor kernel: usbcore: registered new interface driver libusual
>Sep  7 09:07:09 alcor kernel: usbcore: registered new interface driver hiddev
>Sep  7 09:07:09 alcor kernel: usbcore: registered new interface driver usbhid
>Sep  7 09:07:09 alcor kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>Sep  7 09:07:09 alcor kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>Sep  7 09:07:09 alcor kernel: PNP: PS/2 controller doesn't have AUX irq; using default 12
>Sep  7 09:07:09 alcor kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
>Sep  7 09:07:09 alcor kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
>Sep  7 09:07:09 alcor kernel: mice: PS/2 mouse device common for all mice
>Sep  7 09:07:09 alcor kernel: input: AT Translated Set 2 keyboard as /class/input/input1
>Sep  7 09:07:09 alcor kernel: TCP bic registered
>Sep  7 09:07:09 alcor kernel: Initializing XFRM netlink socket
>Sep  7 09:07:09 alcor kernel: NET: Registered protocol family 1
>Sep  7 09:07:09 alcor kernel: NET: Registered protocol family 17
>Sep  7 09:07:09 alcor kernel: powernow-k8: Found 1 AMD Opteron(tm) Processor 244 processors (version 2.00.00)
>Sep  7 09:07:09 alcor kernel: powernow-k8: BIOS error - no PSB or ACPI _PSS objects
>Sep  7 09:07:09 alcor kernel: ACPI: (supports S0 S1 S3 S4 S5)
>Sep  7 09:07:09 alcor kernel: Freeing unused kernel memory: 316k freed
>Sep  7 09:07:09 alcor kernel: Write protecting the kernel read-only data: 1043k
>Sep  7 09:07:09 alcor kernel: USB Universal Host Controller Interface driver v3.0
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, low) -> IRQ 22
>Sep  7 09:07:09 alcor kernel: ohci_hcd 0000:00:02.0: OHCI Host Controller
>Sep  7 09:07:09 alcor kernel: ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>Sep  7 09:07:09 alcor kernel: ohci_hcd 0000:00:02.0: irq 22, io mem 0xbfcfb000
>Sep  7 09:07:09 alcor kernel: usb usb1: configuration #1 chosen from 1 choice
>Sep  7 09:07:09 alcor kernel: hub 1-0:1.0: USB hub found
>Sep  7 09:07:09 alcor kernel: hub 1-0:1.0: 10 ports detected
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 21 (level, low) -> IRQ 21
>Sep  7 09:07:09 alcor kernel: ehci_hcd 0000:00:02.1: EHCI Host Controller
>Sep  7 09:07:09 alcor kernel: ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>Sep  7 09:07:09 alcor kernel: ehci_hcd 0000:00:02.1: debug port 1
>Sep  7 09:07:09 alcor kernel: ehci_hcd 0000:00:02.1: irq 21, io mem 0xbfce0000
>Sep  7 09:07:09 alcor kernel: ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>Sep  7 09:07:09 alcor kernel: usb usb2: configuration #1 chosen from 1 choice
>Sep  7 09:07:09 alcor kernel: hub 2-0:1.0: USB hub found
>Sep  7 09:07:09 alcor kernel: hub 2-0:1.0: 10 ports detected
>Sep  7 09:07:09 alcor kernel: SCSI subsystem initialized
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LTID] enabled at IRQ 20
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 20 (level, low) -> IRQ 20
>Sep  7 09:07:09 alcor kernel: ata1: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xB800 irq 20
>Sep  7 09:07:09 alcor kernel: ata2: SATA max UDMA/133 cmd 0xC000 ctl 0xBC02 bmdma 0xB808 irq 20
>Sep  7 09:07:09 alcor kernel: scsi0 : sata_nv
>Sep  7 09:07:09 alcor kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>Sep  7 09:07:09 alcor kernel: usb 1-4: new low speed USB device using ohci_hcd and address 2
>Sep  7 09:07:09 alcor kernel: ata1.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 NCQ (depth 0/32)
>Sep  7 09:07:09 alcor kernel: ata1.00: ata1: dev 0 multi count 16
>Sep  7 09:07:09 alcor kernel: ata1.00: configured for UDMA/133
>Sep  7 09:07:09 alcor kernel: scsi1 : sata_nv
>Sep  7 09:07:09 alcor kernel: usb 1-4: configuration #1 chosen from 1 choice
>Sep  7 09:07:09 alcor kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>Sep  7 09:07:09 alcor kernel: ata2.00: ATA-7, max UDMA/133, 1465149168 sectors: LBA48 NCQ (depth 0/32)
>Sep  7 09:07:09 alcor kernel: ata2.00: ata2: dev 0 multi count 16
>Sep  7 09:07:09 alcor rpcbind: cannot bind * on udp: Address already in use
>Sep  7 09:07:09 alcor kernel: ata2.00: configured for UDMA/133
>Sep  7 09:07:09 alcor rpcbind: cannot bind tcp: Address already in use
>Sep  7 09:07:09 alcor kernel: scsi 0:0:0:0: Direct-Access     ATA      ST3160811AS      3.AA PQ: 0 ANSI: 5
>Sep  7 09:07:09 alcor kernel: SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>Sep  7 09:07:09 alcor kernel: sda: Write Protect is off
>Sep  7 09:07:09 alcor kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Sep  7 09:07:09 alcor kernel: SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>Sep  7 09:07:09 alcor kernel: sda: Write Protect is off
>Sep  7 09:07:09 alcor kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Sep  7 09:07:09 alcor kernel:  sda: sda1 sda2
>Sep  7 09:07:09 alcor kernel: sd 0:0:0:0: Attached scsi disk sda
>Sep  7 09:07:09 alcor kernel: scsi 1:0:0:0: Direct-Access     ATA      ST3750640NS      3.AE PQ: 0 ANSI: 5
>Sep  7 09:07:09 alcor kernel: SCSI device sdb: 1465149168 512-byte hdwr sectors (750156 MB)
>Sep  7 09:07:09 alcor kernel: sdb: Write Protect is off
>Sep  7 09:07:09 alcor kernel: SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Sep  7 09:07:09 alcor kernel: SCSI device sdb: 1465149168 512-byte hdwr sectors (750156 MB)
>Sep  7 09:07:09 alcor kernel: sdb: Write Protect is off
>Sep  7 09:07:09 alcor kernel: SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Sep  7 09:07:09 alcor kernel:  sdb: sdb1
>Sep  7 09:07:09 alcor kernel: sd 1:0:0:0: Attached scsi disk sdb
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 22
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LTIE] -> GSI 22 (level, low) -> IRQ 22
>Sep  7 09:07:09 alcor kernel: ata3: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA400 irq 22
>Sep  7 09:07:09 alcor kernel: ata4: SATA max UDMA/133 cmd 0xAC00 ctl 0xA802 bmdma 0xA408 irq 22
>Sep  7 09:07:09 alcor kernel: scsi2 : sata_nv
>Sep  7 09:07:09 alcor kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>Sep  7 09:07:09 alcor kernel: ata3.00: ATA-7, max UDMA/133, 1465149168 sectors: LBA48 NCQ (depth 0/32)
>Sep  7 09:07:09 alcor kernel: ata3.00: ata3: dev 0 multi count 16
>Sep  7 09:07:09 alcor kernel: ata3.00: configured for UDMA/133
>Sep  7 09:07:09 alcor kernel: ata3: EH pending after completion, repeating EH (cnt=4)
>Sep  7 09:07:09 alcor kernel: scsi3 : sata_nv
>Sep  7 09:07:09 alcor kernel: hiddev96: USB HID v1.10 Device [American Power Conversion Smart-UPS 1500 RM FW:617.3.D USB FW:8.1] on usb-0000:00:02.0-4
>Sep  7 09:07:09 alcor kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>Sep  7 09:07:09 alcor kernel: ata4.00: ATA-7, max UDMA/133, 1465149168 sectors: LBA48 NCQ (depth 0/32)
>Sep  7 09:07:09 alcor kernel: ata4.00: ata4: dev 0 multi count 16
>Sep  7 09:07:09 alcor kernel: ata4.00: configured for UDMA/133
>Sep  7 09:07:09 alcor kernel: ata4: EH pending after completion, repeating EH (cnt=4)
>Sep  7 09:07:09 alcor kernel: scsi 2:0:0:0: Direct-Access     ATA      ST3750640NS      3.AE PQ: 0 ANSI: 5
>Sep  7 09:07:09 alcor kernel: SCSI device sdc: 1465149168 512-byte hdwr sectors (750156 MB)
>Sep  7 09:07:09 alcor kernel: sdc: Write Protect is off
>Sep  7 09:07:09 alcor kernel: SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Sep  7 09:07:09 alcor kernel: SCSI device sdc: 1465149168 512-byte hdwr sectors (750156 MB)
>Sep  7 09:07:09 alcor kernel: sdc: Write Protect is off
>Sep  7 09:07:09 alcor kernel: SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Sep  7 09:07:09 alcor kernel:  sdc: sdc1
>Sep  7 09:07:09 alcor kernel: sd 2:0:0:0: Attached scsi disk sdc
>Sep  7 09:07:09 alcor kernel: scsi 3:0:0:0: Direct-Access     ATA      ST3750640NS      3.AE PQ: 0 ANSI: 5
>Sep  7 09:07:09 alcor kernel: SCSI device sdd: 1465149168 512-byte hdwr sectors (750156 MB)
>Sep  7 09:07:09 alcor kernel: sdd: Write Protect is off
>Sep  7 09:07:09 alcor kernel: SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Sep  7 09:07:09 alcor kernel: SCSI device sdd: 1465149168 512-byte hdwr sectors (750156 MB)
>Sep  7 09:07:09 alcor kernel: sdd: Write Protect is off
>Sep  7 09:07:09 alcor kernel: SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Sep  7 09:07:09 alcor kernel:  sdd: sdd1
>Sep  7 09:07:09 alcor kernel: sd 3:0:0:0: Attached scsi disk sdd
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LT3D] enabled at IRQ 47
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt 0000:80:07.0[A] -> Link [LT3D] -> GSI 47 (level, low) -> IRQ 47
>Sep  7 09:07:09 alcor kernel: ata5: SATA max UDMA/133 cmd 0xF800 ctl 0xF402 bmdma 0xE800 irq 47
>Sep  7 09:07:09 alcor kernel: ata6: SATA max UDMA/133 cmd 0xF000 ctl 0xEC02 bmdma 0xE808 irq 47
>Sep  7 09:07:09 alcor kernel: scsi4 : sata_nv
>Sep  7 09:07:09 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 3
>Sep  7 09:07:09 alcor kernel: ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>Sep  7 09:07:09 alcor kernel: ata5.00: ATA-7, max UDMA/133, 1465149168 sectors: LBA48 NCQ (depth 0/32)
>Sep  7 09:07:09 alcor kernel: ata5.00: configured for UDMA/133
>Sep  7 09:07:09 alcor kernel: scsi5 : sata_nv
>Sep  7 09:07:09 alcor kernel: usb 1-6: device descriptor read/64, error -62
>Sep  7 09:07:09 alcor kernel: ata6: SATA link down (SStatus 0 SControl 300)
>Sep  7 09:07:09 alcor kernel: scsi 4:0:0:0: Direct-Access     ATA      ST3750640NS      3.AE PQ: 0 ANSI: 5
>Sep  7 09:07:09 alcor kernel: SCSI device sde: 1465149168 512-byte hdwr sectors (750156 MB)
>Sep  7 09:07:09 alcor kernel: sde: Write Protect is off
>Sep  7 09:07:09 alcor kernel: SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Sep  7 09:07:09 alcor kernel: SCSI device sde: 1465149168 512-byte hdwr sectors (750156 MB)
>Sep  7 09:07:09 alcor kernel: sde: Write Protect is off
>Sep  7 09:07:09 alcor kernel: SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Sep  7 09:07:09 alcor kernel:  sde: sde1
>Sep  7 09:07:09 alcor kernel: sd 4:0:0:0: Attached scsi disk sde
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LT2E] enabled at IRQ 46
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt 0000:80:08.0[A] -> Link [LT2E] -> GSI 46 (level, low) -> IRQ 46
>Sep  7 09:07:09 alcor kernel: ata7: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xD400 irq 46
>Sep  7 09:07:09 alcor kernel: ata8: SATA max UDMA/133 cmd 0xDC00 ctl 0xD802 bmdma 0xD408 irq 46
>Sep  7 09:07:09 alcor kernel: scsi6 : sata_nv
>Sep  7 09:07:09 alcor kernel: usb 1-6: device descriptor read/64, error -62
>Sep  7 09:07:09 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 4
>Sep  7 09:07:09 alcor kernel: ata7: SATA link down (SStatus 0 SControl 300)
>Sep  7 09:07:09 alcor kernel: scsi7 : sata_nv
>Sep  7 09:07:09 alcor kernel: usb 1-6: device descriptor read/64, error -62
>Sep  7 09:07:09 alcor kernel: usb 1-6: device descriptor read/64, error -62
>Sep  7 09:07:09 alcor kernel: ata8: SATA link down (SStatus 0 SControl 300)
>Sep  7 09:07:09 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 5
>Sep  7 09:07:09 alcor kernel: usb 1-6: device not accepting address 5, error -62
>Sep  7 09:07:09 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 6
>Sep  7 09:07:09 alcor kernel: usb 1-6: device not accepting address 6, error -62
>Sep  7 09:07:09 alcor kernel: device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>Sep  7 09:07:09 alcor kernel: kjournald starting.  Commit interval 5 seconds
>Sep  7 09:07:09 alcor kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Sep  7 09:07:09 alcor kernel: SELinux:  Disabled at runtime.
>Sep  7 09:07:09 alcor kernel: SELinux:  Unregistering netfilter hooks
>Sep  7 09:07:09 alcor kernel: audit(1189156005.990:2): selinux=0 auid=4294967295
>Sep  7 09:07:09 alcor kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
>Sep  7 09:07:09 alcor kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
>Sep  7 09:07:09 alcor kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0
>Sep  7 09:07:09 alcor kernel: sd 3:0:0:0: Attached scsi generic sg3 type 0
>Sep  7 09:07:09 alcor kernel: sd 4:0:0:0: Attached scsi generic sg4 type 0
>Sep  7 09:07:09 alcor kernel: ck804xrom ck804xrom_init_one(): Unable to register resource 0x00000000ffc00000-0x00000000ffffffff - kernel bug?
>Sep  7 09:07:09 alcor kernel: Found: PMC Pm49FL004
>Sep  7 09:07:09 alcor kernel: EDAC MC: Ver: 2.0.1 Mar 19 2007
>Sep  7 09:07:09 alcor kernel: EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>Sep  7 09:07:09 alcor kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 21
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LKLN] -> GSI 21 (level, low) -> IRQ 21
>Sep  7 09:07:09 alcor kernel: forcedeth: using HIGHDMA
>Sep  7 09:07:09 alcor kernel: input: PC Speaker as /class/input/input2
>Sep  7 09:07:09 alcor kernel: ck804xrom @fff80000: Found 1 x8 devices at 0x0 in 8-bit bank
>Sep  7 09:07:09 alcor kernel: number of JEDEC chips: 1
>Sep  7 09:07:09 alcor kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
>Sep  7 09:07:09 alcor kernel: parport: PnPBIOS parport detected.
>Sep  7 09:07:09 alcor kernel: parport0: PC-style at 0x378, irq 7 [PCSPP]
>Sep  7 09:07:09 alcor kernel: eth0: forcedeth.c: subsystem: 015d9:1011 bound to 0000:00:0a.0
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LK2N] enabled at IRQ 45
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt 0000:80:0a.0[A] -> Link [LK2N] -> GSI 45 (level, low) -> IRQ 45
>Sep  7 09:07:09 alcor kernel: forcedeth: using HIGHDMA
>Sep  7 09:07:09 alcor kernel: i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
>Sep  7 09:07:09 alcor kernel: i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20
>Sep  7 09:07:09 alcor kernel: ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LAUI] -> GSI 20 (level, low) -> IRQ 20
>Sep  7 09:07:09 alcor kernel: eth1: forcedeth.c: subsystem: 015d9:1011 bound to 0000:80:0a.0
>Sep  7 09:07:09 alcor kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Sep  7 09:07:09 alcor kernel: intel8x0_measure_ac97_clock: measured 50744 usecs
>Sep  7 09:07:09 alcor kernel: intel8x0: clocking to 46840
>Sep  7 09:07:09 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 7
>Sep  7 09:07:09 alcor kernel: usb 1-6: device descriptor read/64, error -62
>Sep  7 09:07:09 alcor kernel: usb 1-6: device descriptor read/64, error -62
>Sep  7 09:07:09 alcor kernel: FDC 0 is a post-1991 82077
>Sep  7 09:07:09 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 8
>Sep  7 09:07:09 alcor kernel: usb 1-6: device descriptor read/64, error -62
>Sep  7 09:07:09 alcor kernel: usb 1-6: device descriptor read/64, error -62
>Sep  7 09:07:09 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 9
>Sep  7 09:07:09 alcor kernel: input: Power Button (FF) as /class/input/input3
>Sep  7 09:07:09 alcor kernel: usb 1-6: device not accepting address 9, error -62
>Sep  7 09:07:09 alcor kernel: ACPI: Power Button (FF) [PWRF]
>Sep  7 09:07:09 alcor kernel: input: Power Button (CM) as /class/input/input4
>Sep  7 09:07:09 alcor kernel: ACPI: Power Button (CM) [PWRB]
>Sep  7 09:07:09 alcor kernel: No dock devices found.
>Sep  7 09:07:09 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 10
>Sep  7 09:07:09 alcor kernel: ibm_acpi: ec object not found
>Sep  7 09:07:09 alcor kernel: usb 1-6: device not accepting address 10, error -62
>Sep  7 09:07:09 alcor kernel: EXT3 FS on dm-0, internal journal
>Sep  7 09:07:09 alcor kernel: kjournald starting.  Commit interval 5 seconds
>Sep  7 09:07:09 alcor kernel: EXT3 FS on sda1, internal journal
>Sep  7 09:07:09 alcor kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Sep  7 09:07:09 alcor kernel: kjournald starting.  Commit interval 5 seconds
>Sep  7 09:07:09 alcor kernel: EXT3 FS on dm-2, internal journal
>Sep  7 09:07:09 alcor kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Sep  7 09:07:09 alcor kernel: Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>Sep  7 09:07:09 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 11
>Sep  7 09:07:09 alcor kernel: usb 1-6: device descriptor read/64, error -62
>Sep  7 09:07:09 alcor kernel: usb 1-6: device descriptor read/64, error -62
>Sep  7 09:07:09 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 12
>Sep  7 09:07:09 alcor kernel: usb 1-6: device descriptor read/64, error -62
>Sep  7 09:07:09 alcor kernel: usb 1-6: device descriptor read/64, error -62
>Sep  7 09:07:09 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 13
>Sep  7 09:07:09 alcor kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
>Sep  7 09:07:09 alcor kernel: usb 1-6: device not accepting address 13, error -62
>Sep  7 09:07:09 alcor kernel: usb 1-6: new full speed USB device using ohci_hcd and address 14
>Sep  7 09:07:09 alcor kernel: Netfilter messages via NETLINK v0.30.
>Sep  7 09:07:09 alcor kernel: nf_conntrack version 0.5.0 (4095 buckets, 32760 max)
>Sep  7 09:07:09 alcor kernel: usb 1-6: device not accepting address 14, error -62
>Sep  7 09:07:09 alcor kernel: NET: Registered protocol family 10
>Sep  7 09:07:09 alcor kernel: lo: Disabled Privacy Extensions
>Sep  7 09:07:09 alcor kernel: Mobile IPv6
>Sep  7 09:07:09 alcor rpc.statd[1958]: Version 1.1.0 Starting
>Sep  7 09:07:10 alcor sm-notify[1960]: sm-notify running as root. chown /var/lib/nfs/sm to choose different user 
>Sep  7 09:07:10 alcor hcid[2040]: Bluetooth HCI daemon
>Sep  7 09:07:10 alcor kernel: Bluetooth: Core ver 2.11
>Sep  7 09:07:10 alcor kernel: NET: Registered protocol family 31
>Sep  7 09:07:10 alcor kernel: Bluetooth: HCI device and connection manager initialized
>Sep  7 09:07:10 alcor kernel: Bluetooth: HCI socket layer initialized
>Sep  7 09:07:10 alcor sdpd[2051]: Bluetooth SDP daemon
>Sep  7 09:07:10 alcor sdpd[2051]: Starting SDP server
>Sep  7 09:07:10 alcor kernel: Bluetooth: L2CAP ver 2.8
>Sep  7 09:07:10 alcor kernel: Bluetooth: L2CAP socket layer initialized
>Sep  7 09:07:10 alcor input[2055]: Bluetooth Input daemon
>Sep  7 09:07:10 alcor input[2055]: Registered input manager path:/org/bluez/input
>Sep  7 09:07:10 alcor input[2055]: Bluetooth device not available
>Sep  7 09:07:10 alcor input[2055]: Unable to get on D-Bus
>Sep  7 09:07:10 alcor kernel: Bluetooth: RFCOMM socket layer initialized
>Sep  7 09:07:10 alcor kernel: Bluetooth: RFCOMM TTY layer initialized
>Sep  7 09:07:10 alcor kernel: Bluetooth: RFCOMM ver 1.8
>Sep  7 09:07:16 alcor kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>Sep  7 09:07:16 alcor hidd[2128]: Bluetooth HID daemon
>Sep  7 09:07:17 alcor automount[2154]: lookup_init: lookup(ldap): failed to get query dn
>Sep  7 09:07:17 alcor smartd[2177]: smartd version 5.37 [x86_64-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen 
>Sep  7 09:07:17 alcor smartd[2177]: Home page is http://smartmontools.sourceforge.net/  
>Sep  7 09:07:17 alcor smartd[2177]: Opened configuration file /etc/smartd.conf 
>Sep  7 09:07:17 alcor smartd[2177]: Configuration file /etc/smartd.conf parsed. 
>Sep  7 09:07:17 alcor smartd[2177]: Device: /dev/sda, opened 
>Sep  7 09:07:17 alcor smartd[2177]: Device: /dev/sda, not found in smartd database. 
>Sep  7 09:07:17 alcor smartd[2177]: Device: /dev/sda, is SMART capable. Adding to "monitor" list. 
>Sep  7 09:07:17 alcor smartd[2177]: Device: /dev/sdb, opened 
>Sep  7 09:07:17 alcor smartd[2177]: Device: /dev/sdb, not found in smartd database. 
>Sep  7 09:07:18 alcor smartd[2177]: Device: /dev/sdb, is SMART capable. Adding to "monitor" list. 
>Sep  7 09:07:18 alcor smartd[2177]: Device: /dev/sdc, opened 
>Sep  7 09:07:18 alcor smartd[2177]: Device: /dev/sdc, not found in smartd database. 
>Sep  7 09:07:18 alcor smartd[2177]: Device: /dev/sdc, is SMART capable. Adding to "monitor" list. 
>Sep  7 09:07:18 alcor smartd[2177]: Device: /dev/sdd, opened 
>Sep  7 09:07:18 alcor smartd[2177]: Device: /dev/sdd, not found in smartd database. 
>Sep  7 09:07:18 alcor smartd[2177]: Device: /dev/sdd, is SMART capable. Adding to "monitor" list. 
>Sep  7 09:07:18 alcor smartd[2177]: Device: /dev/sde, opened 
>Sep  7 09:07:18 alcor smartd[2177]: Device: /dev/sde, not found in smartd database. 
>Sep  7 09:07:18 alcor smartd[2177]: Device: /dev/sde, is SMART capable. Adding to "monitor" list. 
>Sep  7 09:07:18 alcor smartd[2177]: Monitoring 5 ATA and 0 SCSI devices 
>Sep  7 09:07:18 alcor smartd[2179]: smartd has fork()ed into background mode. New PID=2179. 
>Sep  7 09:07:19 alcor hpiod: 1.7.4a accepting connections at 2208... 
>Sep  7 09:07:20 alcor xinetd[2269]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in.
>Sep  7 09:07:20 alcor xinetd[2269]: Started working: 1 available service
>Sep  7 09:07:20 alcor ntpd[2287]: ntpd 4.2.4p2@1.1495-o Thu Jun 21 10:50:45 UTC 2007 (1)
>Sep  7 09:07:20 alcor ntpd[2288]: precision = 1.000 usec
>Sep  7 09:07:20 alcor ntpd[2288]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
>Sep  7 09:07:20 alcor ntpd[2288]: Listening on interface #1 wildcard, ::#123 Disabled
>Sep  7 09:07:20 alcor ntpd[2288]: Listening on interface #2 eth0, fe80::230:48ff:fe5a:960c#123 Enabled
>Sep  7 09:07:20 alcor ntpd[2288]: Listening on interface #3 eth1, fe80::230:48ff:fe5a:960d#123 Enabled
>Sep  7 09:07:20 alcor ntpd[2288]: Listening on interface #4 lo, ::1#123 Enabled
>Sep  7 09:07:20 alcor ntpd[2288]: Listening on interface #5 lo, 127.0.0.1#123 Enabled
>Sep  7 09:07:20 alcor ntpd[2288]: Listening on interface #6 eth0, 146.189.76.60#123 Enabled
>Sep  7 09:07:20 alcor ntpd[2288]: Listening on interface #7 eth1, 10.0.0.21#123 Enabled
>Sep  7 09:07:20 alcor ntpd[2288]: kernel time sync status 0040
>Sep  7 09:07:20 alcor ntpd[2288]: frequency initialized -33.557 PPM from /var/lib/ntp/drift
>Sep  7 09:07:20 alcor kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>Sep  7 09:07:20 alcor nfsd[2369]: nfssvc: writing fds to kernel failed: errno 0 (Success)
>Sep  7 09:07:20 alcor nfsd[2369]: nfssvc: writing fds to kernel failed: errno 0 (Success)
>Sep  7 09:07:20 alcor kernel: NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>Sep  7 09:07:20 alcor kernel: NFSD: starting 90-second grace period
>Sep  7 09:07:21 alcor gpm[2457]: *** info [startup.c(95)]: 
>Sep  7 09:07:21 alcor gpm[2457]: Started gpm successfully. Entered daemon mode.
>Sep  7 09:07:22 alcor avahi-daemon[2666]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
>Sep  7 09:07:22 alcor avahi-daemon[2666]: Successfully dropped root privileges.
>Sep  7 09:07:22 alcor avahi-daemon[2666]: avahi-daemon 0.6.17 starting up.
>Sep  7 09:07:23 alcor avahi-daemon[2666]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
>Sep  7 09:07:23 alcor avahi-daemon[2666]: Successfully called chroot().
>Sep  7 09:07:23 alcor avahi-daemon[2666]: Successfully dropped remaining capabilities.
>Sep  7 09:07:23 alcor avahi-daemon[2666]: Loading service file /services/sftp-ssh.service.
>Sep  7 09:07:23 alcor avahi-daemon[2666]: Joining mDNS multicast group on interface eth1.IPv6 with address fe80::230:48ff:fe5a:960d.
>Sep  7 09:07:23 alcor avahi-daemon[2666]: New relevant interface eth1.IPv6 for mDNS.
>Sep  7 09:07:23 alcor avahi-daemon[2666]: Joining mDNS multicast group on interface eth1.IPv4 with address 10.0.0.21.
>Sep  7 09:07:23 alcor avahi-daemon[2666]: New relevant interface eth1.IPv4 for mDNS.
>Sep  7 09:07:23 alcor avahi-daemon[2666]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::230:48ff:fe5a:960c.
>Sep  7 09:07:23 alcor avahi-daemon[2666]: New relevant interface eth0.IPv6 for mDNS.
>Sep  7 09:07:23 alcor avahi-daemon[2666]: Joining mDNS multicast group on interface eth0.IPv4 with address 146.189.76.60.
>Sep  7 09:07:23 alcor avahi-daemon[2666]: New relevant interface eth0.IPv4 for mDNS.
>Sep  7 09:07:23 alcor avahi-daemon[2666]: Network interface enumeration completed.
>Sep  7 09:07:23 alcor avahi-daemon[2666]: Registering new address record for fe80::230:48ff:fe5a:960d on eth1.*.
>Sep  7 09:07:23 alcor avahi-daemon[2666]: Registering new address record for 10.0.0.21 on eth1.IPv4.
>Sep  7 09:07:23 alcor avahi-daemon[2666]: Registering new address record for fe80::230:48ff:fe5a:960c on eth0.*.
>Sep  7 09:07:23 alcor avahi-daemon[2666]: Registering new address record for 146.189.76.60 on eth0.IPv4.
>Sep  7 09:07:23 alcor avahi-daemon[2666]: Registering HINFO record with values 'X86_64'/'LINUX'.
>Sep  7 09:07:23 alcor apcupsd[2314]: apcupsd 3.14.1 (04 May 2007) redhat startup succeeded
>Sep  7 09:07:23 alcor avahi-daemon[2666]: Server startup complete. Host name is alcor.local. Local service cookie is 694397452.
>Sep  7 09:07:24 alcor apcupsd[2314]: NIS server startup succeeded
>Sep  7 09:07:24 alcor avahi-daemon[2666]: Service "SFTP File Transfer on alcor" (/services/sftp-ssh.service) successfully established.

Actions: View

Attachments on bug 280641: 188831 | 189881 | 189891 | 189901 | 192761 | 192771 | 192931 | 194851 | 291534 | 297065 | 306040