Attachment 189931 Details for Bug 279571 – console from kernel-2.6.18-45.el5.bz279571 panic

console from kernel-2.6.18-45.el5.bz279571 panic

serialbz279571.txt (text/plain), 21.28 KB, created by Chris Williams on 2007-09-07 14:12:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Chris Williams

Created: 2007-09-07 14:12:00 UTC

Size: 21.28 KB

patch

obsolete

>Linux version 2.6.18-45.el5.bz279571 (brewbuilder@hs20-bc1-5.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Thu Sep 6 17:09:52 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
> BIOS-e820: 000000001fef0000 - 000000001feff000 (ACPI data)
> BIOS-e820: 000000001feff000 - 000000001ff00000 (ACPI NVS)
> BIOS-e820: 000000001ff00000 - 0000000020000000 (usable)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>512MB LOWMEM available.
>found SMP MP-table at 000f6ce0
>Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>disabling kdump
>Using x86 segment limits to approximate NX protection
>DMI present.
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:3 APIC version 17
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:3 APIC version 17
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
>Detected 2601.100 MHz processor.
>Built 1 zonelists.  Total pages: 131072
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS0,57600n8
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0742000 soft=c0722000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 513568k/524288k available (2080k kernel code, 9992k reserved, 866k data, 220k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4857.36 BogoMIPS (lpj=2428683)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: AMD Dual-Core AMD Opteron(tm) Processor 1218 stepping 03
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0743000 soft=c0723000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5188.06 BogoMIPS (lpj=2594030)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: AMD Dual-Core AMD Opteron(tm) Processor 1218 stepping 03
>Total of 2 processors activated (10045.42 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>migration_cost=973
>checking if image is initramfs... it is
>Freeing initrd memory: 1415k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd9a0, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 1000-103f claimed by PIIX4 ACPI
>PCI quirk: region 1040-104f claimed by PIIX4 SMB
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>NET: Registered protocol family 2
>IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
>TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>TCP bind hash table entries: 32768 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 65536 bind 32768)
>TCP reno registered
>Simple Boot Flag at 0x36 set to 0x80
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1189158945.572:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 99EBAB3BB32B010B
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Limiting direct PCI/PCI transfers.
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x2
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x3
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 440BX Chipset.
>agpgart: AGP aperture is 64M @ 0xec000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PIIX4: IDE controller at PCI slot 0000:00:07.1
>PIIX4: chipset revision 1
>PIIX4: not 100% native mode: will probe irqs later
>    ide1: BM-DMA at 0x1058-0x105f, BIOS settings: hdc:DMA, hdd:pio
>hdc: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>input: AT Translated Set 2 keyboard as /class/input/input0
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 1218 processors (2 cpu cores) (version 2.10.00)
>powernow-k8: MP systems not supported by PSB BIOS structure
>powernow-k8: MP systems not supported by PSB BIOS structure
>Using IPI No-Shortcut mode
>Time: acpi_pm clocksource has been installed.
>ACPI: (supports S0 S1 S5)
>Freeing unused kernel memory: 220k freed
>Write protecting the kernel read-only data: 388k
>Red Hat nash version 4.2.1.10 starting
>Mounted /proc filesystem
>Mounting sysfs
>Creating /dev
>Starting udev
>Loading scsi_mod.ko module
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Loading mptbase.ko module
>Fusion MPT base driver 3.04.04
>Copyright (c) 1999-2007 LSI Logic Corporation
>mptbase: Register for IOC reset notification
>Loading mptscsih.ko module
>Loading scsi_transport_spi.ko module
>Loading mptspi.ko module
>Fusion MPT SPI Host driver 3.04.04
>mptspi: Registered for IOC reset notifications
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 169
>mptbase: mpt_adapter_install
>mptbase: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED
>mptbase: Using 64 bit consistent mask
>mptbase: mem = e0806000, mem_phys = e8800000
>mptbase: facts @ c17cea88, pfacts[0] @ c17cead8
>mptbase: ioc0: PCI device 0000:00:10.0 devfn=0/80, searching for devfn match on ffffffff or 1
>mptbase: Initiating ioc0 bringup
>mptbase: ioc0: IOC operational unexpected
>mptbase: whoinit 0x2 statefault 0 force 0
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: Sending get IocFacts request req_sz=12 reply_sz=80
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>  03000000 00000000 00000000
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>  030f0102 00000000 00000000 00000000 00000000 00200220 00180080 00010000 00000000 00010080 00000000 00000020 00000000 00000000 00000000
>mptbase: ioc0: NB_for_64_byte_frame=1 NBShiftFactor=7 BlockSize=20
>mptbase: ioc0: reply_sz= 80, reply_depth= 128
>mptbase: ioc0: req_sz  = 96, req_depth  = 128
>mptbase: ioc0: Sending get PortFacts(0) request
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>  05000000 00000000 00000000
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>  050a0000 00000000 00000000 00000000 00000000 00000100 00080007 00000000 00000000 00000000
>ioc0: 53C1030: Capabilities={Initiator}
>mptbase: ioc0 installed at interrupt 169
>mptbase: ioc0 ReqToChain alloc  @ c1769200, sz=512 bytes
>mptbase: ioc0 RequestNB alloc  @ c1769000, sz=512 bytes
>mptbase: ioc0 num_sge=17 numSGE=358
>mptbase: ioc0 Now numSGE=40 num_sge=50 num_chain=5
>mptbase: ioc0 ChainToChain alloc @ c1758000, sz=2540 bytes
>mptbase: ioc0.ReplyBuffer sz=80 bytes, ReplyDepth=128
>mptbase: ioc0.ReplyBuffer sz=10240[2800] bytes
>mptbase: ioc0.RequestBuffer sz=96 bytes, RequestDepth=128
>mptbase: ioc0.RequestBuffer sz=12288[3000] bytes
>mptbase: ioc0.ChainBuffer sz=96 bytes, ChainDepth=635
>mptbase: ioc0.ChainBuffer sz=60960[ee20] bytes num_chain=635
>mptbase: ioc0.Total alloc @ df900000[1f900000], sz=83488[14620] bytes
>mptbase: ioc0 ReplyBuffers @ df900000[1f900000]
>mptbase: ioc0 RequestBuffers @ df902800[1f902800]
>mptbase :ioc0 ChainBuffers @ df905800(1f905800)
>mptbase: ioc0.SenseBuffers @ df8f0000[1f8f0000]
>mptbase: ioc0.ReplyBuffers @ df900000[1f900000]
>mptbase: ioc0: upload_fw 0 facts.Flags=0
>mptbase: ioc0: facts.MsgVersion=102
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>  02000004 00010000 00000000
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=10
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>  02050004 00010000 00000000 00000000 00000000
>mptbase: ioc0: Sending Port(0)Enable (req @ dfdbdc48)
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>  06000000 00000000 00000000
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=30
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>  06050000 00000000 00000000 00000000 00000000
>mptbase: ioc0: INFO - Wait IOC_OPERATIONAL state (cnt=0)
>  07080001 00000000 000f0000 00000000 00000000 0000000a 00000000 00000001
>mptbase: Event data:
> 00000001
>mptbase: ioc0: SCSI device NVRAM settings @ c1749c40, sz=64
>mptbase: ioc0: Sending Config request type 3, page 0 and action 0
>  04060000 00000000 000f0001 00000000 00000000 03000301
>mptbase: ioc0: config_complete (mf=df902860,mr=df900050)
>  IOCStatus=0000h, IOCLogInfo=00000000h
>mptbase: ioc0: Sending Config request type 3, page 0 and action 1
>  04060001 00000000 000f0002 00000000 00000000 03000301
>mptbase: ioc0: config_complete (mf=df9028c0,mr=df9000a0)
>  IOCStatus=0000h, IOCLogInfo=00000000h
>mptbase: ioc0: Sending Config request type 3, page 2 and action 0
>  04060000 00000000 000f0003 00000000 00000000 23021301
>mptbase: ioc0: config_complete (mf=df902920,mr=df9000f0)
>  IOCStatus=0000h, IOCLogInfo=00000000h
>mptbase: ioc0: Sending Config request type 3, page 2 and action 6
>  04060006 00000000 000f0004 00000000 00000000 23021301
>mptbase: ioc0: config_complete (mf=df902980,mr=df900140)
>  IOCStatus=0000h, IOCLogInfo=00000000h
>mptbase: ioc0: Sending Config request type 4, page 1 and action 0
>  04060000 00000000 000f0005 00000000 00000000 14010404
>mptbase: ioc0: config_complete (mf=df9029e0,mr=df900190)
>  IOCStatus=0000h, IOCLogInfo=00000000h
>mptbase: ioc0: Sending Config request type 4, page 0 and action 0
>  04060000 00000000 000f0006 00000000 00000000 04000303
>mptbase: ioc0: config_complete (mf=df902a40,mr=df9001e0)
>  IOCStatus=0000h, IOCLogInfo=00000000h
>mptbase: ioc0: Headers: 0: version 3 length 3
>mptbase: ioc0: Headers: 1: version 4 length 4
>mptbase: ioc0: Sending Config request type 1, page 1 and action 0
>  04060000 00000000 000f0007 00000000 00000000 11010401
>mptbase: ioc0: config_complete (mf=df902aa0,mr=df900230)
>  IOCStatus=0000h, IOCLogInfo=00000000h
>mptbase: ioc0: Sending Config request type 1, page 1 and action 1
>  04060001 00000000 000f0008 00000000 00000000 11010401
>mptbase: ioc0: config_complete (mf=df902b00,mr=df900280)
>  IOCStatus=0000h, IOCLogInfo=00000000h
>mptbase: ioc0: WARNING - Coalescing Disabled
>mptbase: ioc0: Sending Config request type 1, page 4 and action 0
>  04060000 00000000 000f0009 00000000 00000000 11040300
>mptbase: ioc0: config_complete (mf=df902b60,mr=df9002d0)
>  IOCStatus=0000h, IOCLogInfo=00000000h
>mptbase: ioc0: Sending Config request type 1, page 4 and action 1
>  04060001 00000000 000f000a 00000000 00000000 11040300
>mptbase: ioc0: config_complete (mf=df902bc0,mr=df900320)
>  IOCStatus=0000h, IOCLogInfo=00000000h
>mptbase: ioc0: Sending Config request type 0, page 2 and action 0
>  04060000 00000000 000f000b 00000000 00000000 20020700
>mptbase: ioc0: config_complete (mf=df902c20,mr=df900370)
>  IOCStatus=0000h, IOCLogInfo=00000000h
>mptbase: ioc0: Sending Config request type 0, page 2 and action 1
>  04060001 00000000 000f000c 00000000 00000000 20020700
>mptbase: ioc0: config_complete (mf=df902c80,mr=df9003c0)
>  IOCStatus=0000h, IOCLogInfo=00000000h
>mptspi: ioc0: ScsiLookup @ df87fe00
>scsi0 : ioc0: LSI53C1030, FwRev=00000000h, Ports=1, MaxQ=128, IRQ=169
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=5
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>  01060000 00000400 000d000d 00000000 00000000 00000000
>mptbase: ioc0: WaitForDoorbell ACK (count=0)
>mptbase: ioc0: WaitForDoorbell INT (cnt=0) howlong=10
>Loading scsi_transport_sas.ko module
>Loading mptsas.ko module
>Fusion MPT SAS Host driver 3.04.04
>mptsas: Registered for IOC reset notifications
>Loading libata.ko module
>Loading ata_piix.ko module
>Loading dm-mod.ko module
>device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>Loading jbd.ko module
>Loading ext3.ko module
>Loading dm-mirror.ko module
>Loading dm-zero.ko module
>Loading dm-snapshot.ko module
>Making device-mapper control node
>Scanning logical volumes
>  Reading all physical volumes.  This may take a while...
>  No volume groups found
>Activating logical volumes
>  Volume group "VolGroup00" not found
>ERROR: /bin/lvm exited abnormally! (pid 389)
>Creating root device
>Mounting root filesystem
>mount: error 6 mounting ext3
>mount: error 2 mounting none
>Switching to new root
>switchroot: mount failed: 22
>umount /initrd/dev failed: 2
>Kernel panic - not syncing: Attempted to kill init!
>

Actions: View

Attachments on bug 279571: 189931 | 190331 | 191681 | 191801 | 191841