Attachment 192271 Details for Bug 242111 – Contents of dmesg command after boot

Contents of dmesg command after boot

dmesg.log (text/plain), 21.01 KB, created by Raul Suarez on 2007-09-11 03:56:12 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Raul Suarez

Created: 2007-09-11 03:56:12 UTC

Size: 21.01 KB

patch

obsolete

>Linux version 2.6.22.4-65.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue Aug 21 22:36:56 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001f740000 (usable)
> BIOS-e820: 000000001f740000 - 000000001f750000 (ACPI data)
> BIOS-e820: 000000001f750000 - 000000001f800000 (ACPI NVS)
>0MB HIGHMEM available.
>503MB LOWMEM available.
>found SMP MP-table at 000ff780
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 128832) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   128832
>  HighMem    128832 ->   128832
>early_node_map[1] active PFN ranges
>    0:        0 ->   128832
>On node 0 totalpages: 128832
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 974 pages used for memmap
>  Normal zone: 123762 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F6F20, 0014 (r0 ACPIAM)
>ACPI: RSDT 1F740000, 002C (r1 INTEL  D845GVFN 20040907 MSFT       97)
>ACPI: FACP 1F740200, 0074 (r1 INTEL  D845GVFN 20040907 MSFT       97)
>ACPI: DSDT 1F740370, 3FBF (r1 INTEL  D845GVFN      10A MSFT  100000D)
>ACPI: FACS 1F750000, 0040
>ACPI: APIC 1F740300, 0068 (r1 INTEL  D845GVFN 20040907 MSFT       97)
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 20000000 (gap: 1f800000:e0800000)
>Built 1 zonelists.  Total pages: 127826
>Kernel command line: ro root=LABEL=/ rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0791000 soft=c0771000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 2800.093 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 503116k/515328k available (2106k kernel code, 11640k reserved, 1114k data, 260k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0000000 - 0xff7fe000   ( 503 MB)
>    lowmem  : 0xc0000000 - 0xdf740000   ( 503 MB)
>      .init : 0xc072b000 - 0xc076c000   ( 260 kB)
>      .data : 0xc060ea2e - 0xc0725504   (1114 kB)
>      .text : 0xc0400000 - 0xc060ea2e   (2106 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 5602.42 BogoMIPS (lpj=2801211)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b180 0000441d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Celeron(R) CPU 2.80GHz stepping 01
>Total of 1 processors activated (5602.42 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1536 bytes
>Time: 23:23:33  Date: 08/10/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
>* this clock source is slow. If you are sure your timer does not have
>* this bug, please use "acpi_pm_good" to disable the workaround
>PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH4 GPIO
>PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>pnp: 00:0b: ioport range 0x400-0x47f has been reserved
>pnp: 00:0b: ioport range 0x680-0x6ff has been reserved
>pnp: 00:0b: ioport range 0x480-0x4bf has been reserved
>pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
>pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0c: iomem range 0xc0000-0xdffff could not be reserved
>pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0c: iomem range 0x100000-0x1f7fffff could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-dfff
>  MEM window: ff800000-ff8fffff
>  PREFETCH window: e6a00000-e6afffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 196608 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2817k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1189466613.407:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 38B1F6ECF739D0D
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 830M Chipset.
>agpgart: Detected 8060K stolen memory.
>agpgart: AGP aperture is 128M @ 0xf0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 7:34:403
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 260k freed
>Write protecting the kernel read-only data: 862k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e880
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 19
>uhci_hcd 0000:01:01.0: UHCI Host Controller
>uhci_hcd 0000:01:01.0: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:01:01.0: irq 19, io base 0x0000d880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new low speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:01:01.1[B] -> GSI 21 (level, low) -> IRQ 20
>uhci_hcd 0000:01:01.1: UHCI Host Controller
>uhci_hcd 0000:01:01.1: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:01:01.1: irq 20, io base 0x0000dc00
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-1: configuration #1 chosen from 1 choice
>input: Microsoft Basic Optical Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-1
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa7fc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 6 ports detected
>ACPI: PCI Interrupt 0000:01:01.2[C] -> GSI 20 (level, low) -> IRQ 22
>ehci_hcd 0000:01:01.2: EHCI Host Controller
>ehci_hcd 0000:01:01.2: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:01:01.2: irq 22, io mem 0xff8ffc00
>ehci_hcd 0000:01:01.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 4 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.11
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
>usb 1-1: USB disconnect, address 2
>ata1.00: ATA-6: WDC WD1600JB-00GVA0, 08.02D08, max UDMA/100
>ata1.00: 312581808 sectors, multi 16: LBA48 
>ata1.01: ATA-2: ST33240A, 0.62, max MWDMA2
>ata1.01: 6303024 sectors, multi 16: LBA 
>ata1.00: limited to UDMA/33 due to 40-wire cable
>ata1.00: configured for UDMA/33
>ata1.01: configured for MWDMA2
>ata2.00: ATAPI: ATAPI   CDRW 52X32, Y.OS, max UDMA/33
>ata2.01: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A103, max UDMA/33
>ata2.00: failed to set xfermode (err_mask=0x1)
>ata2: failed to recover some devices, retrying in 5 secs
>usb 5-1: new low speed USB device using uhci_hcd and address 2
>usb 5-1: configuration #1 chosen from 1 choice
>input: Saitek ST90 USB Stick as /class/input/input3
>input: USB HID v1.00 Joystick [Saitek ST90 USB Stick] on usb-0000:01:01.1-1
>usb 5-2: new full speed USB device using uhci_hcd and address 3
>usb 5-2: configuration #1 chosen from 1 choice
>usb 1-1: new low speed USB device using uhci_hcd and address 3
>usb 1-1: configuration #1 chosen from 1 choice
>input: Microsoft Basic Optical Mouse as /class/input/input4
>input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-1
>usb 4-1: new full speed USB device using uhci_hcd and address 3
>usb 4-1: configuration #1 chosen from 1 choice
>hub 4-1:1.0: USB hub found
>hub 4-1:1.0: 2 ports detected
>usb 4-2: new low speed USB device using uhci_hcd and address 4
>usb 4-2: configuration #1 chosen from 1 choice
>hiddev96: USB HID v1.10 Device [APC Back-UPS ES 500 FW:801.e5.D USB FW:e5] on usb-0000:01:01.0-2
>usb 4-1.1: new full speed USB device using uhci_hcd and address 5
>usb 4-1.1: configuration #1 chosen from 1 choice
>usb 4-1.2: new full speed USB device using uhci_hcd and address 6
>usb 4-1.2: configuration #1 chosen from 1 choice
>ata2.00: failed to set xfermode (err_mask=0x1)
>ata2.00: limiting speed to UDMA/33:PIO3
>ata2: failed to recover some devices, retrying in 5 secs
>ata2.00: failed to set xfermode (err_mask=0x1)
>ata2.00: disabled
>ata2: failed to recover some devices, retrying in 5 secs
>ata2.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JB-00G 08.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 > sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: Direct-Access     ATA      ST33240A         0.62 PQ: 0 ANSI: 5
>sd 0:0:1:0: [sdb] 6303024 512-byte hardware sectors (3227 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:1:0: [sdb] 6303024 512-byte hardware sectors (3227 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 0:0:1:0: [sdb] Attached SCSI disk
>scsi 1:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-4163B A103 PQ: 0 ANSI: 5
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1189466636.771:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>scsi 1:0:1:0: Attached scsi generic sg2 type 5
>sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:1:0: Attached scsi CD-ROM sr0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>iTCO_vendor_support: vendor-support=0
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 23
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>i810_smbus 0000:00:02.0: i810/i815 i2c device found.
>e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 22
>intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or
> don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if
> you are certain that your <4>intel_rng: system has a functional
> RNG, try<4>intel_rng: using the 'no_fwh_detect' option.
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x043D pid 0x007B
>usbcore: registered new interface driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>e100: eth0: e100_probe: addr 0xff8fe000, irq 22, MAC addr 00:13:20:1E:13:42
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 50154 usecs
>intel8x0: clocking to 48000
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>No dock devices found.
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda7, internal journal
>fuse init (API version 7.8)
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda8, internal journal
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1052216k swap on /dev/sda5.  Priority:-1 extents:1 across:1052216k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ndiswrapper version 1.46 loaded (smp=yes)
>ndiswrapper: driver rt2500 (Ralink Technology, Inc.,06/10/2004, 2.02.06.0000) loaded
>ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 18 (level, low) -> IRQ 18
>ndiswrapper: using IRQ 18
>wlan0: ethernet device 00:0c:76:ca:eb:1d using NDIS driver: rt2500, version: 0x20001, NDIS version: 0x500, vendor: 'IEEE 802.11g Wireless Card.', 1814:0201.5.conf
>wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
>usbcore: registered new interface driver ndiswrapper
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>wlan0: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0

Actions: View

Attachments on bug 242111: 155919 | 155956 | 192271 | 192281 | 192291 | 290366