Attachment 192361 Details for Bug 285721 – output of dmesg command

output of dmesg command

dmesg.txt (text/plain), 90.31 KB, created by Matěj Cepl on 2007-09-11 10:06:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Matěj Cepl

Created: 2007-09-11 10:06:26 UTC

Size: 90.31 KB

patch

obsolete

>Linux version 2.6.22.5-77.fc7 (kojibuilder@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Thu Aug 30 21:38:43 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f7b0000 (usable)
> BIOS-e820: 000000003f7b0000 - 000000003f7c5400 (reserved)
> BIOS-e820: 000000003f7c5400 - 000000003f7e7fb8 (ACPI NVS)
> BIOS-e820: 000000003f7e7fb8 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>119MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 260016) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   260016
>early_node_map[1] active PFN ranges
>    0:        0 ->   260016
>On node 0 totalpages: 260016
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 239 pages used for memmap
>  HighMem zone: 30401 pages, LIFO batch:7
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000F7050, 0024 (r2 HP    )
>ACPI: XSDT 3F7C81C8, 007C (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: FACP 3F7C8084, 00F4 (r4 HP     30C0            3 HP          1)
>ACPI: DSDT 3F7C84CC, 12BE9 (r1 HP       nc75xx    10000 MSFT  3000001)
>ACPI: FACS 3F7E7D80, 0040
>ACPI: SLIC 3F7C8244, 0176 (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: HPET 3F7C83BC, 0038 (r1 HP     30C0            1 HP          1)
>ACPI: APIC 3F7C83F4, 0068 (r1 HP     30C0            1 HP          1)
>ACPI: MCFG 3F7C845C, 003C (r1 HP     30C0            1 HP          1)
>ACPI: TCPA 3F7C8498, 0032 (r2 HP     30C0            1 HP          1)
>ACPI: SSDT 3F7DB0B5, 0059 (r1 HP       HPQNLP        1 MSFT  3000001)
>ACPI: SSDT 3F7DB10E, 032A (r1 HP       HPQPAT        1 MSFT  3000001)
>ACPI: SSDT 3F7DBCBE, 025F (r1 HP      Cpu0Tst     3000 INTL 20060317)
>ACPI: SSDT 3F7DBF1D, 00A6 (r1 HP      Cpu1Tst     3000 INTL 20060317)
>ACPI: SSDT 3F7DBFC3, 04D7 (r1 HP        CpuPm     3000 INTL 20060317)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>Built 1 zonelists.  Total pages: 257985
>Kernel command line: ro root=/dev/vg00/lvRoot rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0793000 soft=c0773000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1994.996 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1022584k/1040064k available (2111k kernel code, 16860k reserved, 1117k data, 260k init, 122560k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc072d000 - 0xc076e000   ( 260 kB)
>      .data : 0xc060fd60 - 0xc0727504   (1117 kB)
>      .text : 0xc0400000 - 0xc060fd60   (2111 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Calibrating delay using timer specific routine.. 3993.40 BogoMIPS (lpj=1996703)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0794000 soft=c0774000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3989.87 BogoMIPS (lpj=1994937)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>Total of 2 processors activated (7983.28 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1536 bytes
>HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
>Time: 22:29:29  Date: 09/10/07
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=40
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [C003] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C132._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT]
>ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *5
>ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C140] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C141] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C142] (IRQs 10 11) *0, disabled.
>ACPI Exception (pci_link-0179): AE_NOT_FOUND, Evaluating _PRS [20070126]
>ACPI: Power Resource [C298] (on)
>ACPI: Power Resource [C1C2] (off)
>ACPI: Power Resource [C3B6] (off)
>ACPI: Power Resource [C3B7] (off)
>ACPI: Power Resource [C3B8] (off)
>ACPI: Power Resource [C3B9] (off)
>ACPI: Power Resource [C3BA] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:00: iomem range 0x100000-0x3f7fffff could not be reserved
>pnp: 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
>pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
>pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:0a: ioport range 0x1000-0x107f has been reserved
>pnp: 00:0a: ioport range 0x1100-0x113f has been reserved
>pnp: 00:0a: ioport range 0x1200-0x121f has been reserved
>pnp: 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved
>pnp: 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved
>pnp: 00:0a: iomem range 0xfed20000-0xfed3ffff could not be reserved
>pnp: 00:0a: iomem range 0xfed45000-0xfed8ffff could not be reserved
>pnp: 00:0b: iomem range 0xcee00-0xcffff has been reserved
>pnp: 00:0b: iomem range 0xfeda0000-0xfedbffff could not be reserved
>pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: e4100000-e41fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: e4000000-e40fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: 2000-3fff
>  MEM window: e0000000-e3ffffff
>  PREFETCH window: disabled.
>PCI: Bus 3, cardbus bridge: 0000:02:04.0
>  IO window: 00005000-000050ff
>  IO window: 00005400-000054ff
>  PREFETCH window: 50000000-53ffffff
>  MEM window: 54000000-57ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 5000-5fff
>  MEM window: e4200000-e42fffff
>  PREFETCH window: 50000000-53ffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs...<6>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
> it is
>Freeing initrd memory: 3496k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1189463369.712:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 585DA9746960E0DD
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Transitioning device [C3BB] to D3
>ACPI: Transitioning device [C3BB] to D3
>ACPI: Fan [C3BB] (off)
>ACPI: Transitioning device [C3BC] to D3
>ACPI: Transitioning device [C3BC] to D3
>ACPI: Fan [C3BC] (off)
>ACPI: Transitioning device [C3BD] to D3
>ACPI: Transitioning device [C3BD] to D3
>ACPI: Fan [C3BD] (off)
>ACPI: Transitioning device [C3BE] to D3
>ACPI: Transitioning device [C3BE] to D3
>ACPI: Fan [C3BE] (off)
>ACPI: Transitioning device [C3BF] to D3
>ACPI: Transitioning device [C3BF] to D3
>ACPI: Fan [C3BF] (off)
>ACPI: SSDT 3F7DB500, 027F (r1 HP      Cpu0Ist     3000 INTL 20060317)
>ACPI: SSDT 3F7DB804, 04BA (r1 HP      Cpu0Cst     3001 INTL 20060317)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 3F7DB438, 00C8 (r1 HP      Cpu1Ist     3000 INTL 20060317)
>ACPI: SSDT 3F7DB77F, 0085 (r1 HP      Cpu1Cst     3000 INTL 20060317)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Marking TSC unstable due to: possible TSC halt in C2.
>Time: hpet clocksource has been installed.
>ACPI: Thermal Zone [TZ0] (55 C)
>ACPI: Thermal Zone [TZ1] (50 C)
>ACPI: Thermal Zone [TZ3] (38 C)
>ACPI: Thermal Zone [TZ4] (36 C)
>ACPI: Thermal Zone [TZ5] (74 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>hpet_resources: 0xfed00000 is busy
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 965GM Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:02:04.0 [103c:30c0]
>Yenta: ISA IRQ mask 0x04b8, PCI irq 16
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
>pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>cs: IO port probe 0x5000-0x5fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xe4200000 - 0xe42fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>Clocksource tsc unstable (delta = -350597431 ns)
>PNP: PS/2 Controller [PNP0303:C295,PNP0f13:C296] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 7:31:502
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 260k freed
>Write protecting the kernel read-only data: 864k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004020
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000
>serio: Synaptics pass-through port at isa0060/serio4/input0
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 17, io base 0x00004040
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 19, io base 0x00004060
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 20, io base 0x00004080
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4500000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>usb 1-1: device descriptor read/all, error -71
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xe4508000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.2: version 2.11
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000140c0 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000140c8 irq 15
>ata1.00: ATA-7: FUJITSU MHW2160BH PL, 891F, max UDMA/100
>ata1.00: 312581808 sectors, multi 16: LBA48 
>usb 1-1: new full speed USB device using uhci_hcd and address 4
>ata1.00: configured for UDMA/100
>usb 1-1: configuration #1 chosen from 1 choice
>ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L632M, 0917, max MWDMA2
>ata2.00: configured for MWDMA2
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2160B 891F PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-L632M 0917 PQ: 0 ANSI: 5
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1189463375.873:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1839 types, 82 bools, 1 sens, 1024 cats
>security:  61 classes, 69826 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1189463376.224:3): policy loaded auid=4294967295
>tg3.c:v3.77 (May 31, 2007)
>ACPI: PCI Interrupt 0000:18:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:18:00.0 to 64
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1a:4b:5b:07:46
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>Floppy drive(s): fd0 is 1.44M
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.1.8kd
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:10:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>Bluetooth: Core ver 2.11
>wmaster0: Selected rate control algorithm 'iwl-3945-rs'
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>si3054: cannot initialize. EXT MID = 0000
>floppy0: no floppy controllers found
>SELinux: initialized (dev kvmfs, type kvmfs), uses genfs_contexts
>Floppy drive(s): fd0 is 1.44M
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>floppy0: no floppy controllers found
>ACPI: AC Adapter [C236] (on-line)
>ACPI: Battery Slot [C238] (battery present)
>ACPI: Battery Slot [C237] (battery absent)
>No dock devices found.
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input4
>ACPI: Sleep Button (CM) [C2C0]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [C153]
>set_level status: 0
>ACPI: Video Device [C098] (multi-head: yes  rom: no  post: no)
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-5, type ext3), uses xattr
>Adding 2031608k swap on /dev/vg00/lvSwap.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>audit(1189463408.181:4): audit_pid=1905 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8125 buckets, 65000 max)
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bridge firewalling registered
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>virbr0: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>iwl3945: ipw going down 
>ACPI: PCI interrupt for device 0000:10:00.0 disabled
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.1.8kd
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:10:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>wmaster0: Selected rate control algorithm 'iwl-3945-rs'
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>PM: Preparing system for mem sleep
>Stopping tasks ... done.
>Suspending console(s)
>platform bluetooth: suspend
>rtc rtc0: class suspend
>sr 1:0:0:0: suspend
>sd 0:0:0:0: suspend
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>usb 1-1:1.3: suspend
>usb 1-1:1.2: suspend
>hci_usb 1-1:1.1: suspend
>hci_usb 1-1:1.0: suspend
>usb 1-1: suspend, may wakeup
>hub 7-0:1.0: suspend
>usb usb7: suspend, may wakeup
>hub 6-0:1.0: suspend
>usb usb6: suspend, may wakeup
>hub 5-0:1.0: suspend
>usb usb5: suspend, may wakeup
>hub 4-0:1.0: suspend
>usb usb4: suspend, may wakeup
>hub 3-0:1.0: suspend
>usb usb3: suspend, may wakeup
>hub 2-0:1.0: suspend
>usb usb2: suspend, may wakeup
>serio serio5: suspend
>hub 1-0:1.0: suspend
>usb usb1: suspend, may wakeup
>psmouse serio4: suspend
>serio serio3: suspend
>serio serio2: suspend
>serio serio1: suspend
>atkbd serio0: suspend
>i8042 i8042: suspend
>serial8250 serial8250: suspend
>platform vesafb.0: suspend
>pci_express 0000:00:1c.4:pcie02: suspend
>pci_express 0000:00:1c.4:pcie00: suspend
>pci_express 0000:00:1c.2:pcie02: suspend
>pci_express 0000:00:1c.2:pcie00: suspend
>pci_express 0000:00:1c.1:pcie02: suspend
>pci_express 0000:00:1c.1:pcie00: suspend
>pci_express 0000:00:1c.0:pcie00: suspend
>platform pcspkr: suspend
>system 00:0b: suspend
>system 00:0a: suspend
>system 00:09: suspend
>i8042 aux 00:08: suspend
>i8042 kbd 00:07: suspend
>pnp 00:06: suspend
>rtc_cmos 00:05: suspend, may wakeup
>pnp 00:04: suspend
>pnp 00:03: suspend
>pnp 00:02: suspend
>pnp 00:01: suspend
>system 00:00: suspend
>yenta_cardbus 0000:02:04.0: suspend
>tg3 0000:18:00.0: suspend
>iwl3945 0000:10:00.0: suspend
>iwl3945: ipw going down 
>ACPI: PCI interrupt for device 0000:10:00.0 disabled
>ata_piix 0000:00:1f.2: suspend
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>pci 0000:00:1f.0: suspend
>pci 0000:00:1e.0: suspend
>ehci_hcd 0000:00:1d.7: suspend, may wakeup
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>uhci_hcd 0000:00:1d.2: suspend
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>uhci_hcd 0000:00:1d.1: suspend
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>uhci_hcd 0000:00:1d.0: suspend
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>pcieport-driver 0000:00:1c.4: suspend
>pcieport-driver 0000:00:1c.2: suspend
>pcieport-driver 0000:00:1c.1: suspend
>pcieport-driver 0000:00:1c.0: suspend
>HDA Intel 0000:00:1b.0: suspend
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ehci_hcd 0000:00:1a.7: suspend, may wakeup
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>uhci_hcd 0000:00:1a.1: suspend
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>uhci_hcd 0000:00:1a.0: suspend
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>pci 0000:00:02.1: suspend
>pci 0000:00:02.0: suspend
>agpgart-intel 0000:00:00.0: suspend
>thermal thermal:05: suspend
>thermal thermal:04: suspend
>thermal thermal:03: suspend
>thermal thermal:02: suspend
>thermal thermal:01: suspend
>fan PNP0C0B:04: suspend
>fan PNP0C0B:03: suspend
>fan PNP0C0B:02: suspend
>fan PNP0C0B:01: suspend
>fan PNP0C0B:00: suspend
>power power_resource:06: suspend
>power power_resource:05: suspend
>power power_resource:04: suspend
>power power_resource:03: suspend
>power power_resource:02: suspend
>acpi thermal:00: suspend
>acpi PNP0C02:02: suspend
>acpi PNP0C14:00: suspend
>acpi PNP0C32:00: suspend
>button PNP0C0D:00: suspend
>button PNP0C0E:00: suspend
>ac ACPI0003:00: suspend
>battery PNP0C0A:01: suspend
>battery PNP0C0A:00: suspend
>acpi HPQ0006:00: suspend
>acpi PNP0C02:01: suspend
>acpi PNP0C0F:07: suspend
>pci_link PNP0C0F:06: suspend
>pci_link PNP0C0F:05: suspend
>pci_link PNP0C0F:04: suspend
>pci_link PNP0C0F:03: suspend
>pci_link PNP0C0F:02: suspend
>pci_link PNP0C0F:01: suspend
>pci_link PNP0C0F:00: suspend
>acpi device:44: suspend
>power power_resource:01: suspend
>acpi device:43: suspend
>acpi device:42: suspend
>acpi device:41: suspend
>acpi device:40: suspend
>acpi device:3f: suspend
>acpi device:3e: suspend
>acpi device:3d: suspend
>acpi device:3c: suspend
>acpi device:3b: suspend
>acpi device:3a: suspend
>acpi device:39: suspend
>acpi device:38: suspend
>acpi device:37: suspend
>acpi device:36: suspend
>acpi device:35: suspend
>acpi device:34: suspend
>acpi device:33: suspend
>acpi device:32: suspend
>acpi device:31: suspend
>acpi device:30: suspend
>acpi device:2f: suspend
>acpi device:2e: suspend
>acpi device:2d: suspend
>acpi device:2c: suspend
>acpi device:2b: suspend
>acpi device:2a: suspend
>acpi device:29: suspend
>acpi device:28: suspend
>acpi device:27: suspend
>acpi device:26: suspend
>acpi device:25: suspend
>acpi device:24: suspend
>acpi device:23: suspend
>acpi device:22: suspend
>acpi device:21: suspend
>acpi device:20: suspend
>acpi device:1f: suspend
>acpi device:1e: suspend
>acpi device:1d: suspend
>acpi device:1c: suspend
>acpi device:1b: suspend
>acpi device:1a: suspend
>acpi device:19: suspend
>acpi device:18: suspend
>acpi device:17: suspend
>acpi device:16: suspend
>acpi device:15: suspend
>acpi device:14: suspend
>acpi device:13: suspend
>acpi device:12: suspend
>acpi device:11: suspend
>acpi device:10: suspend
>acpi device:0f: suspend
>acpi device:0e: suspend
>acpi device:0d: suspend
>acpi device:0c: suspend
>acpi device:0b: suspend
>acpi device:0a: suspend
>acpi device:09: suspend
>acpi PNP0C02:00: suspend
>acpi PNP0000:00: suspend
>power power_resource:00: suspend
>acpi SYN0134:00: suspend
>acpi PNP0303:00: suspend
>acpi PNP0103:00: suspend
>acpi PNP0B00:00: suspend
>acpi PNP0800:00: suspend
>acpi PNP0200:00: suspend
>acpi PNP0100:00: suspend
>acpi PNP0C04:00: suspend
>container PNP0A06:00: suspend
>ec PNP0C09:00: suspend
>acpi device:08: suspend
>acpi device:07: suspend
>acpi device:06: suspend
>acpi device:05: suspend
>acpi device:04: suspend
>acpi device:03: suspend
>acpi device:02: suspend
>acpi device:01: suspend
>video video:00: suspend
>pci_root PNP0A08:00: suspend
>acpi PNP0C01:00: suspend
>acpi device:00: suspend
>processor ACPI0007:01: suspend
>processor ACPI0007:00: suspend
>button button_power:00: suspend
>acpi acpi_system:00: suspend
>Disabling non-boot CPUs ...
>Breaking affinity for irq 9
>Breaking affinity for irq 12
>Breaking affinity for irq 14
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU1 is down
>PM: Entering mem sleep
>platform bluetooth: LATE suspend
>serial8250 serial8250: LATE suspend
>platform vesafb.0: LATE suspend
>platform pcspkr: LATE suspend
>yenta_cardbus 0000:02:04.0: LATE suspend
>tg3 0000:18:00.0: LATE suspend
>iwl3945 0000:10:00.0: LATE suspend
>pci 0000:00:1f.0: LATE suspend
>pci 0000:00:1e.0: LATE suspend
>pcieport-driver 0000:00:1c.4: LATE suspend
>pcieport-driver 0000:00:1c.2: LATE suspend
>pcieport-driver 0000:00:1c.1: LATE suspend
>pcieport-driver 0000:00:1c.0: LATE suspend
>HDA Intel 0000:00:1b.0: LATE suspend
>pci 0000:00:02.1: LATE suspend
>pci 0000:00:02.0: LATE suspend
>agpgart-intel 0000:00:00.0: LATE suspend
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>agpgart-intel 0000:00:00.0: EARLY resume
>pci 0000:00:02.0: EARLY resume
>pci 0000:00:02.1: EARLY resume
>uhci_hcd 0000:00:1a.0: EARLY resume
>uhci_hcd 0000:00:1a.1: EARLY resume
>ehci_hcd 0000:00:1a.7: EARLY resume
>HDA Intel 0000:00:1b.0: EARLY resume
>pcieport-driver 0000:00:1c.0: EARLY resume
>pcieport-driver 0000:00:1c.1: EARLY resume
>pcieport-driver 0000:00:1c.2: EARLY resume
>pcieport-driver 0000:00:1c.4: EARLY resume
>uhci_hcd 0000:00:1d.0: EARLY resume
>uhci_hcd 0000:00:1d.1: EARLY resume
>uhci_hcd 0000:00:1d.2: EARLY resume
>ehci_hcd 0000:00:1d.7: EARLY resume
>pci 0000:00:1e.0: EARLY resume
>pci 0000:00:1f.0: EARLY resume
>ata_piix 0000:00:1f.2: EARLY resume
>iwl3945 0000:10:00.0: EARLY resume
>tg3 0000:18:00.0: EARLY resume
>yenta_cardbus 0000:02:04.0: EARLY resume
>platform pcspkr: EARLY resume
>platform vesafb.0: EARLY resume
>serial8250 serial8250: EARLY resume
>i8042 i8042: EARLY resume
>platform bluetooth: EARLY resume
>PM: Finishing wakeup.
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0794000 soft=c0774000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.00 BogoMIPS (lpj=1995000)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>CPU1 is up
>Switched to high resolution mode on CPU 1
>APIC error on CPU1: 00(40)
>acpi acpi_system:00: resuming
>button button_power:00: resuming
>processor ACPI0007:00: resuming
>processor ACPI0007:01: resuming
>acpi device:00: resuming
>acpi PNP0C01:00: resuming
>pci_root PNP0A08:00: resuming
>video video:00: resuming
>acpi device:01: resuming
>acpi device:02: resuming
>acpi device:03: resuming
>acpi device:04: resuming
>acpi device:05: resuming
>acpi device:06: resuming
>acpi device:07: resuming
>acpi device:08: resuming
>ec PNP0C09:00: resuming
>container PNP0A06:00: resuming
>acpi PNP0C04:00: resuming
>acpi PNP0100:00: resuming
>acpi PNP0200:00: resuming
>acpi PNP0800:00: resuming
>acpi PNP0B00:00: resuming
>acpi PNP0103:00: resuming
>acpi PNP0303:00: resuming
>acpi SYN0134:00: resuming
>power power_resource:00: resuming
>acpi PNP0000:00: resuming
>acpi PNP0C02:00: resuming
>acpi device:09: resuming
>acpi device:0a: resuming
>acpi device:0b: resuming
>acpi device:0c: resuming
>acpi device:0d: resuming
>acpi device:0e: resuming
>acpi device:0f: resuming
>acpi device:10: resuming
>acpi device:11: resuming
>acpi device:12: resuming
>acpi device:13: resuming
>acpi device:14: resuming
>acpi device:15: resuming
>acpi device:16: resuming
>acpi device:17: resuming
>acpi device:18: resuming
>acpi device:19: resuming
>acpi device:1a: resuming
>acpi device:1b: resuming
>acpi device:1c: resuming
>acpi device:1d: resuming
>acpi device:1e: resuming
>acpi device:1f: resuming
>acpi device:20: resuming
>acpi device:21: resuming
>acpi device:22: resuming
>acpi device:23: resuming
>acpi device:24: resuming
>acpi device:25: resuming
>acpi device:26: resuming
>acpi device:27: resuming
>acpi device:28: resuming
>acpi device:29: resuming
>acpi device:2a: resuming
>acpi device:2b: resuming
>acpi device:2c: resuming
>acpi device:2d: resuming
>acpi device:2e: resuming
>acpi device:2f: resuming
>acpi device:30: resuming
>acpi device:31: resuming
>acpi device:32: resuming
>acpi device:33: resuming
>acpi device:34: resuming
>acpi device:35: resuming
>acpi device:36: resuming
>acpi device:37: resuming
>acpi device:38: resuming
>acpi device:39: resuming
>acpi device:3a: resuming
>acpi device:3b: resuming
>acpi device:3c: resuming
>acpi device:3d: resuming
>acpi device:3e: resuming
>acpi device:3f: resuming
>acpi device:40: resuming
>acpi device:41: resuming
>acpi device:42: resuming
>acpi device:43: resuming
>power power_resource:01: resuming
>acpi device:44: resuming
>pci_link PNP0C0F:00: resuming
>pci_link PNP0C0F:01: resuming
>pci_link PNP0C0F:02: resuming
>pci_link PNP0C0F:03: resuming
>pci_link PNP0C0F:04: resuming
>pci_link PNP0C0F:05: resuming
>pci_link PNP0C0F:06: resuming
>acpi PNP0C0F:07: resuming
>acpi PNP0C02:01: resuming
>acpi HPQ0006:00: resuming
>battery PNP0C0A:00: resuming
>battery PNP0C0A:01: resuming
>ac ACPI0003:00: resuming
>button PNP0C0E:00: resuming
>button PNP0C0D:00: resuming
>acpi PNP0C32:00: resuming
>acpi PNP0C14:00: resuming
>acpi PNP0C02:02: resuming
>acpi thermal:00: resuming
>power power_resource:02: resuming
>power power_resource:03: resuming
>power power_resource:04: resuming
>power power_resource:05: resuming
>power power_resource:06: resuming
>fan PNP0C0B:00: resuming
>fan PNP0C0B:01: resuming
>fan PNP0C0B:02: resuming
>fan PNP0C0B:03: resuming
>fan PNP0C0B:04: resuming
>thermal thermal:01: resuming
>thermal thermal:02: resuming
>thermal thermal:03: resuming
>thermal thermal:04: resuming
>thermal thermal:05: resuming
>agpgart-intel 0000:00:00.0: resuming
>pci 0000:00:02.0: resuming
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.1: resuming
>uhci_hcd 0000:00:1a.0: resuming
>PCI: Enabling device 0000:00:1a.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>usb usb1: root hub lost power or was reset
>uhci_hcd 0000:00:1a.1: resuming
>PCI: Enabling device 0000:00:1a.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>usb usb2: root hub lost power or was reset
>ehci_hcd 0000:00:1a.7: resuming
>PCI: Enabling device 0000:00:1a.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>HDA Intel 0000:00:1b.0: resuming
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>si3054: cannot initialize. EXT MID = 0000
>pcieport-driver 0000:00:1c.0: resuming
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>pcieport-driver 0000:00:1c.1: resuming
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>pcieport-driver 0000:00:1c.2: resuming
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>pcieport-driver 0000:00:1c.4: resuming
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>uhci_hcd 0000:00:1d.0: resuming
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb3: root hub lost power or was reset
>uhci_hcd 0000:00:1d.1: resuming
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb4: root hub lost power or was reset
>uhci_hcd 0000:00:1d.2: resuming
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb5: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: resuming
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>pci 0000:00:1e.0: resuming
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>pci 0000:00:1f.0: resuming
>ata_piix 0000:00:1f.2: resuming
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>iwl3945 0000:10:00.0: resuming
>Coming out of suspend...
>PCI: Enabling device 0000:10:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>tg3 0000:18:00.0: resuming
>yenta_cardbus 0000:02:04.0: resuming
>system 00:00: resuming
>pnp 00:01: resuming
>pnp 00:02: resuming
>pnp 00:03: resuming
>pnp 00:04: resuming
>rtc_cmos 00:05: resuming
>pnp 00:06: resuming
>i8042 kbd 00:07: resuming
>i8042 aux 00:08: resuming
>system 00:09: resuming
>system 00:0a: resuming
>system 00:0b: resuming
>platform pcspkr: resuming
>pci_express 0000:00:1c.0:pcie00: resuming
>pci_express 0000:00:1c.1:pcie00: resuming
>pci_express 0000:00:1c.1:pcie02: resuming
>pci_express 0000:00:1c.2:pcie00: resuming
>pci_express 0000:00:1c.2:pcie02: resuming
>pci_express 0000:00:1c.4:pcie00: resuming
>pci_express 0000:00:1c.4:pcie02: resuming
>platform vesafb.0: resuming
>serial8250 serial8250: resuming
>i8042 i8042: resuming
>atkbd serio0: resuming
>serio serio1: resuming
>serio serio2: resuming
>serio serio3: resuming
>psmouse serio4: resuming
>usb usb1: resuming
>hub 1-0:1.0: resuming
>serio serio5: resuming
>usb usb2: resuming
>hub 2-0:1.0: resuming
>usb usb3: resuming
>hub 3-0:1.0: resuming
>usb usb4: resuming
>hub 4-0:1.0: resuming
>usb usb5: resuming
>hub 5-0:1.0: resuming
>usb usb6: resuming
>hub 6-0:1.0: resuming
>usb usb7: resuming
>hub 7-0:1.0: resuming
>usb 1-1: resuming
>usb_endpoint usbdev1.4_ep00: PM: resume from 0, parent 1-1 still 2
>hci_usb 1-1:1.0: PM: resume from 2, parent 1-1 still 2
>hci_usb 1-1:1.0: resuming
>usb_endpoint usbdev1.4_ep81: PM: resume from 0, parent 1-1:1.0 still 2
>usb_endpoint usbdev1.4_ep82: PM: resume from 0, parent 1-1:1.0 still 2
>usb_endpoint usbdev1.4_ep02: PM: resume from 0, parent 1-1:1.0 still 2
>hci_usb 1-1:1.1: PM: resume from 2, parent 1-1 still 2
>hci_usb 1-1:1.1: resuming
>usb 1-1:1.2: PM: resume from 2, parent 1-1 still 2
>usb 1-1:1.2: resuming
>usb_endpoint usbdev1.4_ep84: PM: resume from 0, parent 1-1:1.2 still 2
>usb_endpoint usbdev1.4_ep04: PM: resume from 0, parent 1-1:1.2 still 2
>usb 1-1:1.3: PM: resume from 2, parent 1-1 still 2
>usb 1-1:1.3: resuming
>usb_device usbdev1.4: PM: resume from 0, parent 1-1 still 2
>sd 0:0:0:0: resuming
>sd 0:0:0:0: [sda] Starting disk
>ata2.00: configured for MWDMA2
>ata1.00: configured for UDMA/100
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sr 1:0:0:0: resuming
>rtc rtc0: class resume
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>platform bluetooth: resuming
>usb_endpoint usbdev1.4_ep83: PM: resume from 0, parent 1-1:1.1 still 2
>usb_endpoint usbdev1.4_ep03: PM: resume from 0, parent 1-1:1.1 still 2
>bluetooth hci0: PM: resume from 0, parent 1-1:1.0 still 2
>Restarting tasks ... done.
>usb 1-1: USB disconnect, address 4
>usb 1-1: new full speed USB device using uhci_hcd and address 5
>usb 1-1: configuration #1 chosen from 1 choice
>SELinux: initialized (dev kvmfs, type kvmfs), uses genfs_contexts
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>iwl3945: ipw going down 
>ACPI: PCI interrupt for device 0000:10:00.0 disabled
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.1.8kd
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:10:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>wmaster0: Selected rate control algorithm 'iwl-3945-rs'
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: RX authentication from 00:19:5b:22:28:44 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:19:5b:22:28:44
>wlan0: RX AssocResp from 00:19:5b:22:28:44 (capab=0x471 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:19:5b:22:28:44)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: deauthenticate(reason=3)
>wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
>wlan0: RX deauthentication from 00:19:5b:22:28:44 (reason=6)
>wlan0: deauthenticated
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>iwl3945: ipw going down 
>ACPI: PCI interrupt for device 0000:10:00.0 disabled
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.1.8kd
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:10:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>wmaster0: Selected rate control algorithm 'iwl-3945-rs'
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>PM: suspend-to-disk mode set to 'platform'
>swsusp: Basic memory bitmaps created
>Stopping tasks ... done.
>Shrinking memory...  -\done (17711 pages freed)
>Freed 70844 kbytes in 0.15 seconds (472.29 MB/s)
>Suspending console(s)
>usb 1-1:1.3: freeze
>usb 1-1:1.2: freeze
>hci_usb 1-1:1.1: freeze
>hci_usb 1-1:1.0: freeze
>usb 1-1: freeze
>platform bluetooth: freeze
>rtc rtc0: class freeze
>sr 1:0:0:0: freeze
>sd 0:0:0:0: freeze
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>hub 7-0:1.0: freeze
>usb usb7: freeze
>hub 6-0:1.0: freeze
>usb usb6: freeze
>hub 5-0:1.0: freeze
>usb usb5: freeze
>hub 4-0:1.0: freeze
>usb usb4: freeze
>hub 3-0:1.0: freeze
>usb usb3: freeze
>hub 2-0:1.0: freeze
>usb usb2: freeze
>serio serio5: freeze
>hub 1-0:1.0: freeze
>usb usb1: freeze
>psmouse serio4: freeze
>serio serio3: freeze
>serio serio2: freeze
>serio serio1: freeze
>atkbd serio0: freeze
>i8042 i8042: freeze
>serial8250 serial8250: freeze
>platform vesafb.0: freeze
>pci_express 0000:00:1c.4:pcie02: freeze
>pci_express 0000:00:1c.4:pcie00: freeze
>pci_express 0000:00:1c.2:pcie02: freeze
>pci_express 0000:00:1c.2:pcie00: freeze
>pci_express 0000:00:1c.1:pcie02: freeze
>pci_express 0000:00:1c.1:pcie00: freeze
>pci_express 0000:00:1c.0:pcie00: freeze
>platform pcspkr: freeze
>system 00:0b: freeze
>system 00:0a: freeze
>system 00:09: freeze
>i8042 aux 00:08: freeze
>i8042 kbd 00:07: freeze
>pnp 00:06: freeze
>rtc_cmos 00:05: freeze
>pnp 00:04: freeze
>pnp 00:03: freeze
>pnp 00:02: freeze
>pnp 00:01: freeze
>system 00:00: freeze
>yenta_cardbus 0000:02:04.0: freeze
>tg3 0000:18:00.0: freeze
>iwl3945 0000:10:00.0: freeze
>iwl3945: ipw going down 
>ACPI: PCI interrupt for device 0000:10:00.0 disabled
>ata_piix 0000:00:1f.2: freeze
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>pci 0000:00:1f.0: freeze
>pci 0000:00:1e.0: freeze
>ehci_hcd 0000:00:1d.7: freeze
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>uhci_hcd 0000:00:1d.2: freeze
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>uhci_hcd 0000:00:1d.1: freeze
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>uhci_hcd 0000:00:1d.0: freeze
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>pcieport-driver 0000:00:1c.4: freeze
>pcieport-driver 0000:00:1c.2: freeze
>pcieport-driver 0000:00:1c.1: freeze
>pcieport-driver 0000:00:1c.0: freeze
>HDA Intel 0000:00:1b.0: freeze
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ehci_hcd 0000:00:1a.7: freeze
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>uhci_hcd 0000:00:1a.1: freeze
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>uhci_hcd 0000:00:1a.0: freeze
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>pci 0000:00:02.1: freeze
>pci 0000:00:02.0: freeze
>agpgart-intel 0000:00:00.0: freeze
>thermal thermal:05: freeze
>thermal thermal:04: freeze
>thermal thermal:03: freeze
>thermal thermal:02: freeze
>thermal thermal:01: freeze
>fan PNP0C0B:04: freeze
>fan PNP0C0B:03: freeze
>fan PNP0C0B:02: freeze
>fan PNP0C0B:01: freeze
>fan PNP0C0B:00: freeze
>power power_resource:06: freeze
>power power_resource:05: freeze
>power power_resource:04: freeze
>power power_resource:03: freeze
>power power_resource:02: freeze
>acpi thermal:00: freeze
>acpi PNP0C02:02: freeze
>acpi PNP0C14:00: freeze
>acpi PNP0C32:00: freeze
>button PNP0C0D:00: freeze
>button PNP0C0E:00: freeze
>ac ACPI0003:00: freeze
>battery PNP0C0A:01: freeze
>battery PNP0C0A:00: freeze
>acpi HPQ0006:00: freeze
>acpi PNP0C02:01: freeze
>acpi PNP0C0F:07: freeze
>pci_link PNP0C0F:06: freeze
>pci_link PNP0C0F:05: freeze
>pci_link PNP0C0F:04: freeze
>pci_link PNP0C0F:03: freeze
>pci_link PNP0C0F:02: freeze
>pci_link PNP0C0F:01: freeze
>pci_link PNP0C0F:00: freeze
>acpi device:44: freeze
>power power_resource:01: freeze
>acpi device:43: freeze
>acpi device:42: freeze
>acpi device:41: freeze
>acpi device:40: freeze
>acpi device:3f: freeze
>acpi device:3e: freeze
>acpi device:3d: freeze
>acpi device:3c: freeze
>acpi device:3b: freeze
>acpi device:3a: freeze
>acpi device:39: freeze
>acpi device:38: freeze
>acpi device:37: freeze
>acpi device:36: freeze
>acpi device:35: freeze
>acpi device:34: freeze
>acpi device:33: freeze
>acpi device:32: freeze
>acpi device:31: freeze
>acpi device:30: freeze
>acpi device:2f: freeze
>acpi device:2e: freeze
>acpi device:2d: freeze
>acpi device:2c: freeze
>acpi device:2b: freeze
>acpi device:2a: freeze
>acpi device:29: freeze
>acpi device:28: freeze
>acpi device:27: freeze
>acpi device:26: freeze
>acpi device:25: freeze
>acpi device:24: freeze
>acpi device:23: freeze
>acpi device:22: freeze
>acpi device:21: freeze
>acpi device:20: freeze
>acpi device:1f: freeze
>acpi device:1e: freeze
>acpi device:1d: freeze
>acpi device:1c: freeze
>acpi device:1b: freeze
>acpi device:1a: freeze
>acpi device:19: freeze
>acpi device:18: freeze
>acpi device:17: freeze
>acpi device:16: freeze
>acpi device:15: freeze
>acpi device:14: freeze
>acpi device:13: freeze
>acpi device:12: freeze
>acpi device:11: freeze
>acpi device:10: freeze
>acpi device:0f: freeze
>acpi device:0e: freeze
>acpi device:0d: freeze
>acpi device:0c: freeze
>acpi device:0b: freeze
>acpi device:0a: freeze
>acpi device:09: freeze
>acpi PNP0C02:00: freeze
>acpi PNP0000:00: freeze
>power power_resource:00: freeze
>acpi SYN0134:00: freeze
>acpi PNP0303:00: freeze
>acpi PNP0103:00: freeze
>acpi PNP0B00:00: freeze
>acpi PNP0800:00: freeze
>acpi PNP0200:00: freeze
>acpi PNP0100:00: freeze
>acpi PNP0C04:00: freeze
>container PNP0A06:00: freeze
>ec PNP0C09:00: freeze
>acpi device:08: freeze
>acpi device:07: freeze
>acpi device:06: freeze
>acpi device:05: freeze
>acpi device:04: freeze
>acpi device:03: freeze
>acpi device:02: freeze
>acpi device:01: freeze
>video video:00: freeze
>pci_root PNP0A08:00: freeze
>acpi PNP0C01:00: freeze
>acpi device:00: freeze
>processor ACPI0007:01: freeze
>processor ACPI0007:00: freeze
>button button_power:00: freeze
>acpi acpi_system:00: freeze
>Disabling non-boot CPUs ...
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU1 is down
>PM: snapshotting memory.
>platform bluetooth: LATE freeze
>serial8250 serial8250: LATE freeze
>platform vesafb.0: LATE freeze
>platform pcspkr: LATE freeze
>yenta_cardbus 0000:02:04.0: LATE freeze
>tg3 0000:18:00.0: LATE freeze
>iwl3945 0000:10:00.0: LATE freeze
>pci 0000:00:1f.0: LATE freeze
>pci 0000:00:1e.0: LATE freeze
>pcieport-driver 0000:00:1c.4: LATE freeze
>pcieport-driver 0000:00:1c.2: LATE freeze
>pcieport-driver 0000:00:1c.1: LATE freeze
>pcieport-driver 0000:00:1c.0: LATE freeze
>HDA Intel 0000:00:1b.0: LATE freeze
>pci 0000:00:02.1: LATE freeze
>pci 0000:00:02.0: LATE freeze
>agpgart-intel 0000:00:00.0: LATE freeze
>swsusp: critical section: 
>swsusp: Need to copy 116272 pages
>swsusp: Normal pages needed: 116140 + 1024 + 24, available pages: 143609
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>agpgart-intel 0000:00:00.0: EARLY resume
>pci 0000:00:02.0: EARLY resume
>pci 0000:00:02.1: EARLY resume
>uhci_hcd 0000:00:1a.0: EARLY resume
>uhci_hcd 0000:00:1a.1: EARLY resume
>ehci_hcd 0000:00:1a.7: EARLY resume
>HDA Intel 0000:00:1b.0: EARLY resume
>pcieport-driver 0000:00:1c.0: EARLY resume
>pcieport-driver 0000:00:1c.1: EARLY resume
>pcieport-driver 0000:00:1c.2: EARLY resume
>pcieport-driver 0000:00:1c.4: EARLY resume
>uhci_hcd 0000:00:1d.0: EARLY resume
>uhci_hcd 0000:00:1d.1: EARLY resume
>uhci_hcd 0000:00:1d.2: EARLY resume
>ehci_hcd 0000:00:1d.7: EARLY resume
>pci 0000:00:1e.0: EARLY resume
>pci 0000:00:1f.0: EARLY resume
>ata_piix 0000:00:1f.2: EARLY resume
>iwl3945 0000:10:00.0: EARLY resume
>tg3 0000:18:00.0: EARLY resume
>yenta_cardbus 0000:02:04.0: EARLY resume
>platform pcspkr: EARLY resume
>platform vesafb.0: EARLY resume
>serial8250 serial8250: EARLY resume
>i8042 i8042: EARLY resume
>platform bluetooth: EARLY resume
>PM: Image restored successfully.
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0794000 soft=c0774000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.01 BogoMIPS (lpj=1995007)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>Switched to high resolution mode on CPU 1
>CPU1 is up
>Monitor-Mwait will be used to enter C-3 state
>acpi acpi_system:00: resuming
>button button_power:00: resuming
>processor ACPI0007:00: resuming
>processor ACPI0007:01: resuming
>acpi device:00: resuming
>acpi PNP0C01:00: resuming
>pci_root PNP0A08:00: resuming
>video video:00: resuming
>acpi device:01: resuming
>acpi device:02: resuming
>acpi device:03: resuming
>acpi device:04: resuming
>acpi device:05: resuming
>acpi device:06: resuming
>acpi device:07: resuming
>acpi device:08: resuming
>ec PNP0C09:00: resuming
>container PNP0A06:00: resuming
>acpi PNP0C04:00: resuming
>acpi PNP0100:00: resuming
>acpi PNP0200:00: resuming
>acpi PNP0800:00: resuming
>acpi PNP0B00:00: resuming
>acpi PNP0103:00: resuming
>acpi PNP0303:00: resuming
>acpi SYN0134:00: resuming
>power power_resource:00: resuming
>acpi PNP0000:00: resuming
>acpi PNP0C02:00: resuming
>acpi device:09: resuming
>acpi device:0a: resuming
>acpi device:0b: resuming
>acpi device:0c: resuming
>acpi device:0d: resuming
>acpi device:0e: resuming
>acpi device:0f: resuming
>acpi device:10: resuming
>acpi device:11: resuming
>acpi device:12: resuming
>acpi device:13: resuming
>acpi device:14: resuming
>acpi device:15: resuming
>acpi device:16: resuming
>acpi device:17: resuming
>acpi device:18: resuming
>acpi device:19: resuming
>acpi device:1a: resuming
>acpi device:1b: resuming
>acpi device:1c: resuming
>acpi device:1d: resuming
>acpi device:1e: resuming
>acpi device:1f: resuming
>acpi device:20: resuming
>acpi device:21: resuming
>acpi device:22: resuming
>acpi device:23: resuming
>acpi device:24: resuming
>acpi device:25: resuming
>acpi device:26: resuming
>acpi device:27: resuming
>acpi device:28: resuming
>acpi device:29: resuming
>acpi device:2a: resuming
>acpi device:2b: resuming
>acpi device:2c: resuming
>acpi device:2d: resuming
>acpi device:2e: resuming
>acpi device:2f: resuming
>acpi device:30: resuming
>acpi device:31: resuming
>acpi device:32: resuming
>acpi device:33: resuming
>acpi device:34: resuming
>acpi device:35: resuming
>acpi device:36: resuming
>acpi device:37: resuming
>acpi device:38: resuming
>acpi device:39: resuming
>acpi device:3a: resuming
>acpi device:3b: resuming
>acpi device:3c: resuming
>acpi device:3d: resuming
>acpi device:3e: resuming
>acpi device:3f: resuming
>acpi device:40: resuming
>acpi device:41: resuming
>acpi device:42: resuming
>acpi device:43: resuming
>power power_resource:01: resuming
>acpi device:44: resuming
>pci_link PNP0C0F:00: resuming
>pci_link PNP0C0F:01: resuming
>pci_link PNP0C0F:02: resuming
>pci_link PNP0C0F:03: resuming
>pci_link PNP0C0F:04: resuming
>pci_link PNP0C0F:05: resuming
>pci_link PNP0C0F:06: resuming
>acpi PNP0C0F:07: resuming
>acpi PNP0C02:01: resuming
>acpi HPQ0006:00: resuming
>battery PNP0C0A:00: resuming
>battery PNP0C0A:01: resuming
>ac ACPI0003:00: resuming
>button PNP0C0E:00: resuming
>button PNP0C0D:00: resuming
>acpi PNP0C32:00: resuming
>acpi PNP0C14:00: resuming
>acpi PNP0C02:02: resuming
>acpi thermal:00: resuming
>power power_resource:02: resuming
>power power_resource:03: resuming
>power power_resource:04: resuming
>power power_resource:05: resuming
>power power_resource:06: resuming
>fan PNP0C0B:00: resuming
>fan PNP0C0B:01: resuming
>fan PNP0C0B:02: resuming
>fan PNP0C0B:03: resuming
>ACPI: Transitioning device [C3BE] to D3
>ACPI: Transitioning device [C3BE] to D3
>fan PNP0C0B:04: resuming
>thermal thermal:01: resuming
>thermal thermal:02: resuming
>thermal thermal:03: resuming
>thermal thermal:04: resuming
>thermal thermal:05: resuming
>agpgart-intel 0000:00:00.0: resuming
>pci 0000:00:02.0: resuming
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.1: resuming
>uhci_hcd 0000:00:1a.0: resuming
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>usb usb1: root hub lost power or was reset
>uhci_hcd 0000:00:1a.1: resuming
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>usb usb2: root hub lost power or was reset
>ehci_hcd 0000:00:1a.7: resuming
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>usb usb6: root hub lost power or was reset
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>HDA Intel 0000:00:1b.0: resuming
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>si3054: cannot initialize. EXT MID = 0000
>pcieport-driver 0000:00:1c.0: resuming
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>pcieport-driver 0000:00:1c.1: resuming
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>pcieport-driver 0000:00:1c.2: resuming
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>pcieport-driver 0000:00:1c.4: resuming
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>uhci_hcd 0000:00:1d.0: resuming
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb3: root hub lost power or was reset
>uhci_hcd 0000:00:1d.1: resuming
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb4: root hub lost power or was reset
>uhci_hcd 0000:00:1d.2: resuming
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb5: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: resuming
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>usb usb7: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>pci 0000:00:1e.0: resuming
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>pci 0000:00:1f.0: resuming
>ata_piix 0000:00:1f.2: resuming
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>iwl3945 0000:10:00.0: resuming
>Coming out of suspend...
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>tg3 0000:18:00.0: resuming
>yenta_cardbus 0000:02:04.0: resuming
>ata1.00: configured for UDMA/100
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>system 00:00: resuming
>pnp 00:01: resuming
>pnp 00:02: resuming
>pnp 00:03: resuming
>pnp 00:04: resuming
>rtc_cmos 00:05: resuming
>pnp 00:06: resuming
>i8042 kbd 00:07: resuming
>i8042 aux 00:08: resuming
>system 00:09: resuming
>system 00:0a: resuming
>system 00:0b: resuming
>platform pcspkr: resuming
>pci_express 0000:00:1c.0:pcie00: resuming
>pci_express 0000:00:1c.1:pcie00: resuming
>pci_express 0000:00:1c.1:pcie02: resuming
>pci_express 0000:00:1c.2:pcie00: resuming
>pci_express 0000:00:1c.2:pcie02: resuming
>pci_express 0000:00:1c.4:pcie00: resuming
>pci_express 0000:00:1c.4:pcie02: resuming
>platform vesafb.0: resuming
>serial8250 serial8250: resuming
>i8042 i8042: resuming
>atkbd serio0: resuming
>serio serio1: resuming
>serio serio2: resuming
>serio serio3: resuming
>psmouse serio4: resuming
>ata2.00: configured for MWDMA2
>usb usb1: resuming
>hub 1-0:1.0: resuming
>serio serio5: resuming
>usb usb2: resuming
>hub 2-0:1.0: resuming
>usb usb3: resuming
>hub 3-0:1.0: resuming
>usb usb4: resuming
>hub 4-0:1.0: resuming
>usb usb5: resuming
>hub 5-0:1.0: resuming
>usb usb6: resuming
>hub 6-0:1.0: resuming
>usb usb7: resuming
>hub 7-0:1.0: resuming
>sd 0:0:0:0: resuming
>sd 0:0:0:0: [sda] Starting disk
>sr 1:0:0:0: resuming
>rtc rtc0: class resume
>platform bluetooth: resuming
>usb 1-1: resuming
>usb_endpoint usbdev1.5_ep00: PM: resume from 0, parent 1-1 still 1
>hci_usb 1-1:1.0: PM: resume from 1, parent 1-1 still 1
>hci_usb 1-1:1.0: resuming
>bluetooth hci0: PM: resume from 0, parent 1-1:1.0 still 1
>usb_endpoint usbdev1.5_ep81: PM: resume from 0, parent 1-1:1.0 still 1
>usb_endpoint usbdev1.5_ep82: PM: resume from 0, parent 1-1:1.0 still 1
>usb_endpoint usbdev1.5_ep02: PM: resume from 0, parent 1-1:1.0 still 1
>hci_usb 1-1:1.1: PM: resume from 1, parent 1-1 still 1
>hci_usb 1-1:1.1: resuming
>usb_endpoint usbdev1.5_ep83: PM: resume from 0, parent 1-1:1.1 still 1
>usb_endpoint usbdev1.5_ep03: PM: resume from 0, parent 1-1:1.1 still 1
>usb 1-1:1.2: PM: resume from 1, parent 1-1 still 1
>usb 1-1:1.2: resuming
>usb_endpoint usbdev1.5_ep84: PM: resume from 0, parent 1-1:1.2 still 1
>usb_endpoint usbdev1.5_ep04: PM: resume from 0, parent 1-1:1.2 still 1
>usb 1-1:1.3: PM: resume from 1, parent 1-1 still 1
>usb 1-1:1.3: resuming
>usb_device usbdev1.5: PM: resume from 0, parent 1-1 still 1
>Restarting tasks ... <6>usb 1-1: USB disconnect, address 5
>done.
>swsusp: Basic memory bitmaps freed
>set_level status: 0
>usb 1-1: new full speed USB device using uhci_hcd and address 6
>set_level status: 0
>set_level status: 0
>SELinux: initialized (dev kvmfs, type kvmfs), uses genfs_contexts
>set_level status: 0
>set_level status: 0
>set_level status: 0
>usb 1-1: configuration #1 chosen from 1 choice
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: tg3_abort_hw timed out for eth0, TX_MODE_ENABLE will not clear MAC_TX_MODE=ffffffff
>iwl3945: ipw going down 
>ACPI: PCI interrupt for device 0000:10:00.0 disabled
>ACPI: PCI interrupt for device 0000:18:00.0 disabled
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.1.8kd
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:10:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>wmaster0: Selected rate control algorithm 'iwl-3945-rs'
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: RX authentication from 00:19:5b:22:28:44 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:19:5b:22:28:44
>wlan0: RX AssocResp from 00:19:5b:22:28:44 (capab=0x471 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:19:5b:22:28:44)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>tun0: Disabled Privacy Extensions
>set_level status: 0
>set_level status: 0
>set_level status: 0
>set_level status: 0
>set_level status: 0
>set_level status: 0
>wlan0: deauthenticate(reason=3)
>PM: Preparing system for mem sleep
>Stopping tasks ... done.
>Suspending console(s)
>usb 1-1:1.3: suspend
>usb 1-1:1.2: suspend
>hci_usb 1-1:1.1: suspend
>hci_usb 1-1:1.0: suspend
>usb 1-1: suspend, may wakeup
>platform bluetooth: suspend
>rtc rtc0: class suspend
>sr 1:0:0:0: suspend
>sd 0:0:0:0: suspend
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>hub 7-0:1.0: suspend
>usb usb7: suspend, may wakeup
>hub 6-0:1.0: suspend
>usb usb6: suspend, may wakeup
>hub 5-0:1.0: suspend
>usb usb5: suspend, may wakeup
>hub 4-0:1.0: suspend
>usb usb4: suspend, may wakeup
>hub 3-0:1.0: suspend
>usb usb3: suspend, may wakeup
>hub 2-0:1.0: suspend
>usb usb2: suspend, may wakeup
>serio serio5: suspend
>hub 1-0:1.0: suspend
>usb usb1: suspend, may wakeup
>psmouse serio4: suspend
>serio serio3: suspend
>serio serio2: suspend
>serio serio1: suspend
>atkbd serio0: suspend
>i8042 i8042: suspend
>serial8250 serial8250: suspend
>platform vesafb.0: suspend
>pci_express 0000:00:1c.4:pcie02: suspend
>pci_express 0000:00:1c.4:pcie00: suspend
>pci_express 0000:00:1c.2:pcie02: suspend
>pci_express 0000:00:1c.2:pcie00: suspend
>pci_express 0000:00:1c.1:pcie02: suspend
>pci_express 0000:00:1c.1:pcie00: suspend
>pci_express 0000:00:1c.0:pcie00: suspend
>platform pcspkr: suspend
>system 00:0b: suspend
>system 00:0a: suspend
>system 00:09: suspend
>i8042 aux 00:08: suspend
>i8042 kbd 00:07: suspend
>pnp 00:06: suspend
>rtc_cmos 00:05: suspend, may wakeup
>pnp 00:04: suspend
>pnp 00:03: suspend
>pnp 00:02: suspend
>pnp 00:01: suspend
>system 00:00: suspend
>yenta_cardbus 0000:02:04.0: suspend
>pci 0000:18:00.0: suspend
>iwl3945 0000:10:00.0: suspend
>iwl3945: ipw going down 
>ACPI: PCI interrupt for device 0000:10:00.0 disabled
>ata_piix 0000:00:1f.2: suspend
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>pci 0000:00:1f.0: suspend
>pci 0000:00:1e.0: suspend
>ehci_hcd 0000:00:1d.7: suspend, may wakeup
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>uhci_hcd 0000:00:1d.2: suspend
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>uhci_hcd 0000:00:1d.1: suspend
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>uhci_hcd 0000:00:1d.0: suspend
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>pcieport-driver 0000:00:1c.4: suspend
>pcieport-driver 0000:00:1c.2: suspend
>pcieport-driver 0000:00:1c.1: suspend
>pcieport-driver 0000:00:1c.0: suspend
>HDA Intel 0000:00:1b.0: suspend
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ehci_hcd 0000:00:1a.7: suspend, may wakeup
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>uhci_hcd 0000:00:1a.1: suspend
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>uhci_hcd 0000:00:1a.0: suspend
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>pci 0000:00:02.1: suspend
>pci 0000:00:02.0: suspend
>agpgart-intel 0000:00:00.0: suspend
>thermal thermal:05: suspend
>thermal thermal:04: suspend
>thermal thermal:03: suspend
>thermal thermal:02: suspend
>thermal thermal:01: suspend
>fan PNP0C0B:04: suspend
>fan PNP0C0B:03: suspend
>fan PNP0C0B:02: suspend
>fan PNP0C0B:01: suspend
>fan PNP0C0B:00: suspend
>power power_resource:06: suspend
>power power_resource:05: suspend
>power power_resource:04: suspend
>power power_resource:03: suspend
>power power_resource:02: suspend
>acpi thermal:00: suspend
>acpi PNP0C02:02: suspend
>acpi PNP0C14:00: suspend
>acpi PNP0C32:00: suspend
>button PNP0C0D:00: suspend
>button PNP0C0E:00: suspend
>ac ACPI0003:00: suspend
>battery PNP0C0A:01: suspend
>battery PNP0C0A:00: suspend
>acpi HPQ0006:00: suspend
>acpi PNP0C02:01: suspend
>acpi PNP0C0F:07: suspend
>pci_link PNP0C0F:06: suspend
>pci_link PNP0C0F:05: suspend
>pci_link PNP0C0F:04: suspend
>pci_link PNP0C0F:03: suspend
>pci_link PNP0C0F:02: suspend
>pci_link PNP0C0F:01: suspend
>pci_link PNP0C0F:00: suspend
>acpi device:44: suspend
>power power_resource:01: suspend
>acpi device:43: suspend
>acpi device:42: suspend
>acpi device:41: suspend
>acpi device:40: suspend
>acpi device:3f: suspend
>acpi device:3e: suspend
>acpi device:3d: suspend
>acpi device:3c: suspend
>acpi device:3b: suspend
>acpi device:3a: suspend
>acpi device:39: suspend
>acpi device:38: suspend
>acpi device:37: suspend
>acpi device:36: suspend
>acpi device:35: suspend
>acpi device:34: suspend
>acpi device:33: suspend
>acpi device:32: suspend
>acpi device:31: suspend
>acpi device:30: suspend
>acpi device:2f: suspend
>acpi device:2e: suspend
>acpi device:2d: suspend
>acpi device:2c: suspend
>acpi device:2b: suspend
>acpi device:2a: suspend
>acpi device:29: suspend
>acpi device:28: suspend
>acpi device:27: suspend
>acpi device:26: suspend
>acpi device:25: suspend
>acpi device:24: suspend
>acpi device:23: suspend
>acpi device:22: suspend
>acpi device:21: suspend
>acpi device:20: suspend
>acpi device:1f: suspend
>acpi device:1e: suspend
>acpi device:1d: suspend
>acpi device:1c: suspend
>acpi device:1b: suspend
>acpi device:1a: suspend
>acpi device:19: suspend
>acpi device:18: suspend
>acpi device:17: suspend
>acpi device:16: suspend
>acpi device:15: suspend
>acpi device:14: suspend
>acpi device:13: suspend
>acpi device:12: suspend
>acpi device:11: suspend
>acpi device:10: suspend
>acpi device:0f: suspend
>acpi device:0e: suspend
>acpi device:0d: suspend
>acpi device:0c: suspend
>acpi device:0b: suspend
>acpi device:0a: suspend
>acpi device:09: suspend
>acpi PNP0C02:00: suspend
>acpi PNP0000:00: suspend
>power power_resource:00: suspend
>acpi SYN0134:00: suspend
>acpi PNP0303:00: suspend
>acpi PNP0103:00: suspend
>acpi PNP0B00:00: suspend
>acpi PNP0800:00: suspend
>acpi PNP0200:00: suspend
>acpi PNP0100:00: suspend
>acpi PNP0C04:00: suspend
>container PNP0A06:00: suspend
>ec PNP0C09:00: suspend
>acpi device:08: suspend
>acpi device:07: suspend
>acpi device:06: suspend
>acpi device:05: suspend
>acpi device:04: suspend
>acpi device:03: suspend
>acpi device:02: suspend
>acpi device:01: suspend
>video video:00: suspend
>pci_root PNP0A08:00: suspend
>acpi PNP0C01:00: suspend
>acpi device:00: suspend
>processor ACPI0007:01: suspend
>processor ACPI0007:00: suspend
>button button_power:00: suspend
>acpi acpi_system:00: suspend
>Disabling non-boot CPUs ...
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU1 is down
>PM: Entering mem sleep
>platform bluetooth: LATE suspend
>serial8250 serial8250: LATE suspend
>platform vesafb.0: LATE suspend
>platform pcspkr: LATE suspend
>yenta_cardbus 0000:02:04.0: LATE suspend
>pci 0000:18:00.0: LATE suspend
>iwl3945 0000:10:00.0: LATE suspend
>pci 0000:00:1f.0: LATE suspend
>pci 0000:00:1e.0: LATE suspend
>pcieport-driver 0000:00:1c.4: LATE suspend
>pcieport-driver 0000:00:1c.2: LATE suspend
>pcieport-driver 0000:00:1c.1: LATE suspend
>pcieport-driver 0000:00:1c.0: LATE suspend
>HDA Intel 0000:00:1b.0: LATE suspend
>pci 0000:00:02.1: LATE suspend
>pci 0000:00:02.0: LATE suspend
>agpgart-intel 0000:00:00.0: LATE suspend
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>agpgart-intel 0000:00:00.0: EARLY resume
>pci 0000:00:02.0: EARLY resume
>pci 0000:00:02.1: EARLY resume
>uhci_hcd 0000:00:1a.0: EARLY resume
>uhci_hcd 0000:00:1a.1: EARLY resume
>ehci_hcd 0000:00:1a.7: EARLY resume
>HDA Intel 0000:00:1b.0: EARLY resume
>pcieport-driver 0000:00:1c.0: EARLY resume
>pcieport-driver 0000:00:1c.1: EARLY resume
>pcieport-driver 0000:00:1c.2: EARLY resume
>pcieport-driver 0000:00:1c.4: EARLY resume
>uhci_hcd 0000:00:1d.0: EARLY resume
>uhci_hcd 0000:00:1d.1: EARLY resume
>uhci_hcd 0000:00:1d.2: EARLY resume
>ehci_hcd 0000:00:1d.7: EARLY resume
>pci 0000:00:1e.0: EARLY resume
>pci 0000:00:1f.0: EARLY resume
>ata_piix 0000:00:1f.2: EARLY resume
>iwl3945 0000:10:00.0: EARLY resume
>pci 0000:18:00.0: EARLY resume
>yenta_cardbus 0000:02:04.0: EARLY resume
>platform pcspkr: EARLY resume
>platform vesafb.0: EARLY resume
>serial8250 serial8250: EARLY resume
>i8042 i8042: EARLY resume
>platform bluetooth: EARLY resume
>PM: Finishing wakeup.
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0794000 soft=c0774000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.05 BogoMIPS (lpj=1995026)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>Switched to high resolution mode on CPU 1
>CPU1 is up
>APIC error on CPU1: 00(40)
>acpi acpi_system:00: resuming
>button button_power:00: resuming
>processor ACPI0007:00: resuming
>processor ACPI0007:01: resuming
>acpi device:00: resuming
>acpi PNP0C01:00: resuming
>pci_root PNP0A08:00: resuming
>video video:00: resuming
>acpi device:01: resuming
>acpi device:02: resuming
>acpi device:03: resuming
>acpi device:04: resuming
>acpi device:05: resuming
>acpi device:06: resuming
>acpi device:07: resuming
>acpi device:08: resuming
>ec PNP0C09:00: resuming
>container PNP0A06:00: resuming
>acpi PNP0C04:00: resuming
>acpi PNP0100:00: resuming
>acpi PNP0200:00: resuming
>acpi PNP0800:00: resuming
>acpi PNP0B00:00: resuming
>acpi PNP0103:00: resuming
>acpi PNP0303:00: resuming
>acpi SYN0134:00: resuming
>power power_resource:00: resuming
>acpi PNP0000:00: resuming
>acpi PNP0C02:00: resuming
>acpi device:09: resuming
>acpi device:0a: resuming
>acpi device:0b: resuming
>acpi device:0c: resuming
>acpi device:0d: resuming
>acpi device:0e: resuming
>acpi device:0f: resuming
>acpi device:10: resuming
>acpi device:11: resuming
>acpi device:12: resuming
>acpi device:13: resuming
>acpi device:14: resuming
>acpi device:15: resuming
>acpi device:16: resuming
>acpi device:17: resuming
>acpi device:18: resuming
>acpi device:19: resuming
>acpi device:1a: resuming
>acpi device:1b: resuming
>acpi device:1c: resuming
>acpi device:1d: resuming
>acpi device:1e: resuming
>acpi device:1f: resuming
>acpi device:20: resuming
>acpi device:21: resuming
>acpi device:22: resuming
>acpi device:23: resuming
>acpi device:24: resuming
>acpi device:25: resuming
>acpi device:26: resuming
>acpi device:27: resuming
>acpi device:28: resuming
>acpi device:29: resuming
>acpi device:2a: resuming
>acpi device:2b: resuming
>acpi device:2c: resuming
>acpi device:2d: resuming
>acpi device:2e: resuming
>acpi device:2f: resuming
>acpi device:30: resuming
>acpi device:31: resuming
>acpi device:32: resuming
>acpi device:33: resuming
>acpi device:34: resuming
>acpi device:35: resuming
>acpi device:36: resuming
>acpi device:37: resuming
>acpi device:38: resuming
>acpi device:39: resuming
>acpi device:3a: resuming
>acpi device:3b: resuming
>acpi device:3c: resuming
>acpi device:3d: resuming
>acpi device:3e: resuming
>acpi device:3f: resuming
>acpi device:40: resuming
>acpi device:41: resuming
>acpi device:42: resuming
>acpi device:43: resuming
>power power_resource:01: resuming
>acpi device:44: resuming
>pci_link PNP0C0F:00: resuming
>pci_link PNP0C0F:01: resuming
>pci_link PNP0C0F:02: resuming
>pci_link PNP0C0F:03: resuming
>pci_link PNP0C0F:04: resuming
>pci_link PNP0C0F:05: resuming
>pci_link PNP0C0F:06: resuming
>acpi PNP0C0F:07: resuming
>acpi PNP0C02:01: resuming
>acpi HPQ0006:00: resuming
>battery PNP0C0A:00: resuming
>battery PNP0C0A:01: resuming
>ac ACPI0003:00: resuming
>button PNP0C0E:00: resuming
>button PNP0C0D:00: resuming
>acpi PNP0C32:00: resuming
>acpi PNP0C14:00: resuming
>acpi PNP0C02:02: resuming
>acpi thermal:00: resuming
>power power_resource:02: resuming
>power power_resource:03: resuming
>power power_resource:04: resuming
>power power_resource:05: resuming
>power power_resource:06: resuming
>fan PNP0C0B:00: resuming
>fan PNP0C0B:01: resuming
>fan PNP0C0B:02: resuming
>fan PNP0C0B:03: resuming
>fan PNP0C0B:04: resuming
>thermal thermal:01: resuming
>thermal thermal:02: resuming
>thermal thermal:03: resuming
>thermal thermal:04: resuming
>thermal thermal:05: resuming
>agpgart-intel 0000:00:00.0: resuming
>pci 0000:00:02.0: resuming
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.1: resuming
>uhci_hcd 0000:00:1a.0: resuming
>PCI: Enabling device 0000:00:1a.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>usb usb1: root hub lost power or was reset
>uhci_hcd 0000:00:1a.1: resuming
>PCI: Enabling device 0000:00:1a.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>usb usb2: root hub lost power or was reset
>ehci_hcd 0000:00:1a.7: resuming
>PCI: Enabling device 0000:00:1a.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>HDA Intel 0000:00:1b.0: resuming
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>si3054: cannot initialize. EXT MID = 0000
>pcieport-driver 0000:00:1c.0: resuming
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>pcieport-driver 0000:00:1c.1: resuming
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>pcieport-driver 0000:00:1c.2: resuming
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>pcieport-driver 0000:00:1c.4: resuming
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>uhci_hcd 0000:00:1d.0: resuming
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb3: root hub lost power or was reset
>uhci_hcd 0000:00:1d.1: resuming
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb4: root hub lost power or was reset
>uhci_hcd 0000:00:1d.2: resuming
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb5: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: resuming
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>pci 0000:00:1e.0: resuming
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>pci 0000:00:1f.0: resuming
>ata_piix 0000:00:1f.2: resuming
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>iwl3945 0000:10:00.0: resuming
>Coming out of suspend...
>PCI: Enabling device 0000:10:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>pci 0000:18:00.0: resuming
>yenta_cardbus 0000:02:04.0: resuming
>system 00:00: resuming
>pnp 00:01: resuming
>pnp 00:02: resuming
>pnp 00:03: resuming
>pnp 00:04: resuming
>rtc_cmos 00:05: resuming
>pnp 00:06: resuming
>i8042 kbd 00:07: resuming
>i8042 aux 00:08: resuming
>system 00:09: resuming
>system 00:0a: resuming
>system 00:0b: resuming
>platform pcspkr: resuming
>pci_express 0000:00:1c.0:pcie00: resuming
>pci_express 0000:00:1c.1:pcie00: resuming
>pci_express 0000:00:1c.1:pcie02: resuming
>pci_express 0000:00:1c.2:pcie00: resuming
>pci_express 0000:00:1c.2:pcie02: resuming
>pci_express 0000:00:1c.4:pcie00: resuming
>pci_express 0000:00:1c.4:pcie02: resuming
>platform vesafb.0: resuming
>serial8250 serial8250: resuming
>i8042 i8042: resuming
>atkbd serio0: resuming
>serio serio1: resuming
>serio serio2: resuming
>serio serio3: resuming
>psmouse serio4: resuming
>usb usb1: resuming
>hub 1-0:1.0: resuming
>serio serio5: resuming
>usb usb2: resuming
>hub 2-0:1.0: resuming
>usb usb3: resuming
>hub 3-0:1.0: resuming
>usb usb4: resuming
>hub 4-0:1.0: resuming
>usb usb5: resuming
>hub 5-0:1.0: resuming
>usb usb6: resuming
>hub 6-0:1.0: resuming
>usb usb7: resuming
>hub 7-0:1.0: resuming
>sd 0:0:0:0: resuming
>sd 0:0:0:0: [sda] Starting disk
>ata2.00: configured for MWDMA2
>ata1.00: configured for UDMA/100
>sr 1:0:0:0: resuming
>rtc rtc0: class resume
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>platform bluetooth: resuming
>usb 1-1: resuming
>usb_endpoint usbdev1.6_ep00: PM: resume from 0, parent 1-1 still 2
>hci_usb 1-1:1.0: PM: resume from 2, parent 1-1 still 2
>hci_usb 1-1:1.0: resuming
>bluetooth hci0: PM: resume from 0, parent 1-1:1.0 still 2
>usb_endpoint usbdev1.6_ep81: PM: resume from 0, parent 1-1:1.0 still 2
>usb_endpoint usbdev1.6_ep82: PM: resume from 0, parent 1-1:1.0 still 2
>usb_endpoint usbdev1.6_ep02: PM: resume from 0, parent 1-1:1.0 still 2
>hci_usb 1-1:1.1: PM: resume from 2, parent 1-1 still 2
>hci_usb 1-1:1.1: resuming
>usb_endpoint usbdev1.6_ep83: PM: resume from 0, parent 1-1:1.1 still 2
>usb_endpoint usbdev1.6_ep03: PM: resume from 0, parent 1-1:1.1 still 2
>usb 1-1:1.2: PM: resume from 2, parent 1-1 still 2
>usb 1-1:1.2: resuming
>usb_endpoint usbdev1.6_ep84: PM: resume from 0, parent 1-1:1.2 still 2
>usb_endpoint usbdev1.6_ep04: PM: resume from 0, parent 1-1:1.2 still 2
>usb 1-1:1.3: PM: resume from 2, parent 1-1 still 2
>usb 1-1:1.3: resuming
>usb_device usbdev1.6: PM: resume from 0, parent 1-1 still 2
>Restarting tasks ... <6>usb 1-1: USB disconnect, address 6
>done.
>usb 1-1: new full speed USB device using uhci_hcd and address 7
>usb 1-1: configuration #1 chosen from 1 choice
>SELinux: initialized (dev kvmfs, type kvmfs), uses genfs_contexts
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: RX authentication from 00:19:5b:22:28:44 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:19:5b:22:28:44
>wlan0: RX AssocResp from 00:19:5b:22:28:44 (capab=0x471 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:19:5b:22:28:44)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present
>IN= OUT=wlan0 SRC=192.168.1.3 DST=204.11.244.21 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11050 DF PROTO=TCP SPT=44910 DPT=6667 WINDOW=344 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=63.245.208.159 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47842 DF PROTO=TCP SPT=43805 DPT=6667 WINDOW=250 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=128.32.112.245 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=58663 DF PROTO=TCP SPT=42261 DPT=6667 WINDOW=217 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=204.11.244.21 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11051 DF PROTO=TCP SPT=44910 DPT=6667 WINDOW=344 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=63.245.208.159 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47843 DF PROTO=TCP SPT=43805 DPT=6667 WINDOW=250 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=128.32.112.245 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=58664 DF PROTO=TCP SPT=42261 DPT=6667 WINDOW=217 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=204.11.244.21 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=11052 DF PROTO=TCP SPT=44910 DPT=6667 WINDOW=344 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=128.32.112.245 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=58665 DF PROTO=TCP SPT=42261 DPT=6667 WINDOW=217 RES=0x00 ACK PSH FIN URGP=0 
>tun0: Disabled Privacy Extensions
>IN= OUT=wlan0 SRC=192.168.1.3 DST=193.28.235.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=36011 DF PROTO=TCP SPT=34330 DPT=80 WINDOW=176 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=192.150.18.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=26750 DF PROTO=TCP SPT=38732 DPT=80 WINDOW=131 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.176.120 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=53970 DF PROTO=TCP SPT=49153 DPT=80 WINDOW=218 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=198.82.161.58 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52131 DF PROTO=TCP SPT=46781 DPT=80 WINDOW=176 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=193.28.235.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=36012 DF PROTO=TCP SPT=34330 DPT=80 WINDOW=176 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=198.82.161.58 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52132 DF PROTO=TCP SPT=46781 DPT=80 WINDOW=176 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.176.120 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=53971 DF PROTO=TCP SPT=49153 DPT=80 WINDOW=218 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=192.150.18.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=26751 DF PROTO=TCP SPT=38732 DPT=80 WINDOW=131 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=193.28.235.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=36013 DF PROTO=TCP SPT=34330 DPT=80 WINDOW=176 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=198.82.161.58 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52133 DF PROTO=TCP SPT=46781 DPT=80 WINDOW=176 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.176.120 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=53972 DF PROTO=TCP SPT=49153 DPT=80 WINDOW=218 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=193.28.235.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=36014 DF PROTO=TCP SPT=34330 DPT=80 WINDOW=176 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=192.150.18.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=26752 DF PROTO=TCP SPT=38732 DPT=80 WINDOW=131 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=198.82.161.58 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52134 DF PROTO=TCP SPT=46781 DPT=80 WINDOW=176 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=193.28.235.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=36015 DF PROTO=TCP SPT=34330 DPT=80 WINDOW=176 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.176.120 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=53973 DF PROTO=TCP SPT=49153 DPT=80 WINDOW=218 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=192.150.18.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=26753 DF PROTO=TCP SPT=38732 DPT=80 WINDOW=131 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=198.82.161.58 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52135 DF PROTO=TCP SPT=46781 DPT=80 WINDOW=176 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=193.28.235.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=36016 DF PROTO=TCP SPT=34330 DPT=80 WINDOW=176 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.176.120 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=53974 DF PROTO=TCP SPT=49153 DPT=80 WINDOW=218 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=192.150.18.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=26754 DF PROTO=TCP SPT=38732 DPT=80 WINDOW=131 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=198.82.161.58 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52136 DF PROTO=TCP SPT=46781 DPT=80 WINDOW=176 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=193.28.235.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=36017 DF PROTO=TCP SPT=34330 DPT=80 WINDOW=176 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.176.120 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=53975 DF PROTO=TCP SPT=49153 DPT=80 WINDOW=218 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=192.150.18.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=26755 DF PROTO=TCP SPT=38732 DPT=80 WINDOW=131 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=198.82.161.58 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52137 DF PROTO=TCP SPT=46781 DPT=80 WINDOW=176 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=193.28.235.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=36018 DF PROTO=TCP SPT=34330 DPT=80 WINDOW=176 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.176.120 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=53976 DF PROTO=TCP SPT=49153 DPT=80 WINDOW=218 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=192.150.18.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=26756 DF PROTO=TCP SPT=38732 DPT=80 WINDOW=131 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=198.82.161.58 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52138 DF PROTO=TCP SPT=46781 DPT=80 WINDOW=176 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=193.28.235.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=36019 DF PROTO=TCP SPT=34330 DPT=80 WINDOW=176 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.176.120 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=53977 DF PROTO=TCP SPT=49153 DPT=80 WINDOW=218 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=82.208.50.129 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=49272 DF PROTO=TCP SPT=43322 DPT=1755 WINDOW=1002 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=192.150.18.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=26757 DF PROTO=TCP SPT=38732 DPT=80 WINDOW=131 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=198.82.161.58 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52139 DF PROTO=TCP SPT=46781 DPT=80 WINDOW=176 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=193.28.235.37 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=36020 DF PROTO=TCP SPT=34330 DPT=80 WINDOW=176 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=209.132.176.120 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=53978 DF PROTO=TCP SPT=49153 DPT=80 WINDOW=218 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=192.150.18.46 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=26758 DF PROTO=TCP SPT=38732 DPT=80 WINDOW=131 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.3 DST=198.82.161.58 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52140 DF PROTO=TCP SPT=46781 DPT=80 WINDOW=176 RES=0x00 ACK PSH FIN URGP=0

Actions: View

Attachments on bug 285721: 192361 | 216801 | 216811 | 223371 | 223451 | 226381 | 226391 | 226401 | 226761 | 226771 | 226781