Attachment 192991 Details for Bug 242088 – F7 guest kernel messages with sata "HSM violation" errors

F7 guest kernel messages with sata "HSM violation" errors

f7-fv-console.log (text/plain), 11.56 KB, created by Eduardo Habkost on 2007-09-11 20:35:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Eduardo Habkost

Created: 2007-09-11 20:35:43 UTC

Size: 11.56 KB

patch

obsolete

>Linux version 2.6.21-1.3194.fc7 (kojibuilder@hammer2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:47:07 EDT 2007
>Command line: initrd=initrd.img console=ttyS0 console=tty1 ignore_loglevel BOOT_IMAGE=vmlinuz 
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001f3fac00 (usable)
> BIOS-e820: 000000001f3fac00 - 000000001f400000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 127994) 1 entries of 3200 used
>end_pfn_map = 128000
>DMI 2.4 present.
>ACPI: RSDP 000EB0B0, 0024 (r2    Xen)
>ACPI: XSDT 000EB020, 0044 (r1    Xen      HVM        0 HVML        0)
>ACPI: FACP 000EAE30, 00F4 (r4    Xen      HVM        0 HVML        0)
>ACPI: DSDT 000EA040, 0D67 (r2    Xen      HVM        0 INTL 20060707)
>ACPI: FACS 000EA000, 0040
>ACPI: APIC 000EAF30, 0072 (r2    Xen      HVM        0 HVML        0)
>ACPI: HPET 000EAFB0, 0038 (r1    Xen      HVM        0 HVML        0)
>ACPI: SSDT 000EAFE8, 0038 (r2    Xen      HVM        0 HVML        0)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000001f3fa000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 127994) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000001f3fa000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   127994
>On node 0 totalpages: 127897
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1277 pages reserved
>  DMA zone: 2666 pages, LIFO batch:0
>  DMA32 zone: 1693 pages used for memmap
>  DMA32 zone: 122205 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1f48
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 7 global_irq 7 low level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ5 used by override.
>ACPI: IRQ7 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ10 used by override.
>ACPI: IRQ11 used by override.
>Setting APIC routing to physical flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000e0000
>Nosave address range: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 20000000 (gap: 1f400000:e0c00000)
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 43648 bytes of per cpu data
>Built 1 zonelists.  Total pages: 124871
>Kernel command line: initrd=initrd.img console=ttyS0 console=tty1 ignore_loglevel BOOT_IMAGE=vmlinuz 
>debug: ignoring loglevel setting.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 16384 bytes)
>time.c: Detected 1596.505 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 492808k/511976k available (2319k kernel code, 18780k reserved, 1375k data, 316k init)
>Calibrating delay using timer specific routine.. 3197.78 BogoMIPS (lpj=1598893)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 32k freed
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 6249969
>Detected 6.249 MHz APIC timer.
>Brought up 1 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1888 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
>* this clock source is slow. Consider trying other clock sources
>PCI quirk: region 1f40-1f7f claimed by PIIX4 ACPI
>Boot video device is 0000:00:02.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 49891033 Hz
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
>TCP established hash table entries: 16384 (order: 6, 393216 bytes)
>TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 5563k freed
>audit: initializing netlink socket (disabled)
>audit(1189542573.601:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key F2580AE679027173
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Limiting direct PCI/PCI transfers.
>PCI: PIIX3: Enabling Passive Release on 0000:00:01.0
>Activating ISA DMA hang workarounds.
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ï¿½serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 316k freed
>Write protecting the kernel read-only data: 1032k
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
>loop: loaded (max 8 devices)
>FDC 0 is a S82078B
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>input: PC Speaker as /class/input/input3
>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>SCSI subsystem initialized
>Loading iSCSI transport class v2.0-724.
>iscsi: registered transport (tcp)
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:01.3[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:01.3 to 64
>uhci_hcd 0000:00:01.3: UHCI Host Controller
>uhci_hcd 0000:00:01.3: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:01.3: irq 23, io base 0x0000c020
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 32 (level, low) -> IRQ 32
>eth0: RTL-8139C+ at 0xffffc20000018000, 00:16:3e:75:d4:cf, IRQ 32
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>libata version 2.20 loaded.
>ata_piix 0000:00:01.1: version 2.10ac1
>PCI: Setting latency timer of device 0000:00:01.1 to 64
>ata1: PATA max MWDMA2 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001c000 irq 14
>ata2: PATA max MWDMA2 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001c008 irq 15
>scsi0 : ata_piix
>ata1.00: ATA-7: QEMU HARDDISK, 0.8.2, max UDMA/100
>ata1.00: 10485760 sectors, multi 16: LBA48 
>ata1.00: configured for MWDMA2
>scsi1 : ata_piix
>ata2.00: ATAPI, max MWDMA2
>ata2.00: configured for MWDMA2
>scsi 0:0:0:0: Direct-Access     ATA      QEMU HARDDISK    0.8. PQ: 0 ANSI: 5
>SCSI device sda: 10485760 512-byte hdwr sectors (5369 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 10485760 512-byte hdwr sectors (5369 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sda: unknown partition table
>sd 0:0:0:0: Attached scsi disk sda
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: (BMDMA stat 0x5)
>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
>         res 48/01:02:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
>ata2: soft resetting port
>ata2.00: configured for MWDMA2
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: (BMDMA stat 0x5)
>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
>         res 48/01:02:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
>ata2: soft resetting port
>ata2.00: configured for MWDMA2
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: (BMDMA stat 0x5)
>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
>         res 48/01:02:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
>ata2: soft resetting port
>ata2.00: configured for MWDMA2
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata2.00: (BMDMA stat 0x5)
>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
>         res 48/01:02:00:00:00/00:00:00:00:00/a0 Emask 0x2 (HSM violation)
>ata2: soft resetting port
>ata2.00: configured for MWDMA2
>ata2: EH complete
>

Actions: View

Attachments on bug 242088: 155903 | 155904 | 192991