Attachment 194921 Details for Bug 289711 – Current output of 'dmesg'

Current output of 'dmesg'

dmesg.txt (text/plain), 28.88 KB, created by Ashish Shukla on 2007-09-13 18:28:09 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ashish Shukla

Created: 2007-09-13 18:28:09 UTC

Size: 28.88 KB

patch

obsolete

>Linux version 2.6.22.5-76.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Thu Aug 30 13:08:59 EDT 2007
>Command line: ro root=LABEL=/ rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f67d000 (usable)
> BIOS-e820: 000000003f67d000 - 000000003f6e9000 (ACPI NVS)
> BIOS-e820: 000000003f6e9000 - 000000003f6ed000 (usable)
> BIOS-e820: 000000003f6ed000 - 000000003f6ff000 (ACPI data)
> BIOS-e820: 000000003f6ff000 - 000000003f700000 (usable)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 259709) 1 entries of 3200 used
>Entering add_active_range(0, 259817, 259821) 2 entries of 3200 used
>Entering add_active_range(0, 259839, 259840) 3 entries of 3200 used
>end_pfn_map = 259840
>DMI 2.3 present.
>ACPI: RSDP 000FE020, 0014 (r0 INTEL )
>ACPI: RSDT 3F6FDE48, 0050 (r1 INTEL  D945GNT       CED MSFT  1000013)
>ACPI: FACP 3F6FCF10, 0074 (r1 INTEL  D945GNT       CED MSFT  1000013)
>ACPI: DSDT 3F6F8010, 3FCC (r1 INTEL  D945GNT       CED MSFT  1000013)
>ACPI: FACS 3F6E1C40, 0040
>ACPI: APIC 3F6FCE10, 0078 (r1 INTEL  D945GNT       CED MSFT  1000013)
>ACPI: WDDT 3F6F7F90, 0040 (r1 INTEL  D945GNT       CED MSFT  1000013)
>ACPI: MCFG 3F6F7F10, 003C (r1 INTEL  D945GNT       CED MSFT  1000013)
>ACPI: ASF! 3F6FCD10, 00A6 (r32 INTEL  D945GNT       CED MSFT  1000013)
>ACPI: HPET 3F6F7E90, 0038 (r1 INTEL  D945GNT       CED MSFT  1000013)
>ACPI: SSDT 3F6FDC10, 01BC (r1 INTEL     CpuPm      CED MSFT  1000013)
>ACPI: SSDT 3F6FDA10, 0175 (r1 INTEL   Cpu0Ist      CED MSFT  1000013)
>ACPI: SSDT 3F6FD810, 0175 (r1 INTEL   Cpu1Ist      CED MSFT  1000013)
>ACPI: SSDT 3F6FD610, 0175 (r1 INTEL   Cpu2Ist      CED MSFT  1000013)
>ACPI: SSDT 3F6FD410, 0175 (r1 INTEL   Cpu3Ist      CED MSFT  1000013)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003f700000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 259709) 1 entries of 3200 used
>Entering add_active_range(0, 259817, 259821) 2 entries of 3200 used
>Entering add_active_range(0, 259839, 259840) 3 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000003f700000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[4] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   259709
>    0:   259817 ->   259821
>    0:   259839 ->   259840
>On node 0 totalpages: 259617
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1300 pages reserved
>  DMA zone: 2643 pages, LIFO batch:0
>  DMA32 zone: 3496 pages used for memmap
>  DMA32 zone: 252122 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>swsusp: Registered nosave memory region: 000000003f67d000 - 000000003f6e9000
>swsusp: Registered nosave memory region: 000000003f6ed000 - 000000003f6ff000
>Allocating PCI resources starting at 40000000 (gap: 3f700000:c0900000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 40968 bytes of per cpu data
>Built 1 zonelists.  Total pages: 254765
>Kernel command line: ro root=LABEL=/ rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 2999.996 MHz processor.
>Console: colour VGA+ 80x25
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 1015508k/1039360k available (2366k kernel code, 22960k reserved, 1400k data, 312k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
>Calibrating delay using timer specific routine.. 6004.04 BogoMIPS (lpj=3002021)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 12499928
>Detected 12.499 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5999.98 BogoMIPS (lpj=2999993)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU1: Thermal monitoring enabled (TM1)
>              Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2048 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support.
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0500-053f claimed by ICH6 GPIO
>PCI: Firmware left 0000:04:08.0 e100 interrupts enabled, disabling
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>pnp: 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
>pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
>pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
>pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
>pnp: 00:06: ioport range 0x500-0x53f has been reserved
>pnp: 00:06: ioport range 0x400-0x47f has been reserved
>pnp: 00:06: ioport range 0x680-0x6ff has been reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: 48200000-482fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: 48300000-483fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: disabled.
>  MEM window: 48400000-484fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: 1000-1fff
>  MEM window: 48000000-480fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>Time: tsc clocksource has been installed.
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3080k freed
>audit: initializing netlink socket (disabled)
>audit(1189726752.502:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 4A67DBB026B0246B
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
>hpet_resources: 0xfed00000 is busy
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 945G Chipset.
>agpgart: Detected 8060K stolen memory.
>agpgart: AGP aperture is 128M @ 0x40000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 312k freed
>Write protecting the kernel read-only data: 1060k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-2: new low speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0x481a4000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.11
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000120b0 irq 14
>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000120b8 irq 15
>usb 1-2: device not accepting address 2, error -71
>ata1.00: ATA-7: ST3160812AV, 3.ASJ, max UDMA/100
>ata1.00: 312581808 sectors, multi 16: LBA48 
>ata1.01: ATAPI: TSSTcorpCD/DVDW SH-S182F, SB01, max UDMA/33
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata2: port disabled. ignoring.
>scsi 0:0:0:0: Direct-Access     ATA      ST3160812AV      3.AS PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: CD-ROM            TSSTcorp CD/DVDW SH-S182F SB01 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x00000000000120c8 ctl 0x00000000000120ee bmdma 0x00000000000120a0 irq 19
>ata4: SATA max UDMA/133 cmd 0x00000000000120c0 ctl 0x00000000000120ea bmdma 0x00000000000120a8 irq 19
>ata3.01: ATA-7: ST3250824SV, 3.ASJ, max UDMA/133
>ata3.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.01: configured for UDMA/133
>usb 1-2: new low speed USB device using uhci_hcd and address 4
>scsi 2:0:1:0: Direct-Access     ATA      ST3250824SV      3.AS PQ: 0 ANSI: 5
>sd 2:0:1:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:1:0: [sdb] Write Protect is off
>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:1:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:1:0: [sdb] Write Protect is off
>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 >
>sd 2:0:1:0: [sdb] Attached SCSI disk
>usb 1-2: configuration #1 chosen from 1 choice
>hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS ES 650Y-IN FW:853.m3.I USB FW:m3] on usb-0000:00:1d.0-2
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>usb 4-2: configuration #2 chosen from 2 choices
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1832 types, 81 bools, 1 sens, 1024 cats
>security:  61 classes, 68724 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda5, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1189726758.416:2): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 0:0:1:0: Attached scsi generic sg1 type 5
>sd 2:0:1:0: Attached scsi generic sg2 type 0
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>iTCO_vendor_support: vendor-support=0
>eth0: register 'cdc_ether' at usb-0000:00:1d.3-2, CDC Ethernet Device, 00:08:5c:5b:f4:13
>usbcore: registered new interface driver cdc_ether
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or
> don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if
> you are certain that your <4>intel_rng: system has a functional
> RNG, try<4>intel_rng: using the 'no_fwh_detect' option.
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 20 (level, low) -> IRQ 20
>e100: eth0: e100_probe: addr 0x48008000, irq 20, MAC addr 00:13:20:B7:55:0A
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>8139cp 0000:04:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
>8139cp 0000:04:00.0: Try the "8139too" driver instead.
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 21 (level, low) -> IRQ 21
>eth1: RealTek RTL8139 at 0xffffc200005f4000, 00:00:21:23:cc:ed, IRQ 21
>eth1:  Identified 8139 chip type 'RTL-8139B'
>parport_pc 00:07: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 22 (level, low) -> IRQ 22
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>floppy0: no floppy controllers found
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>audit(1189706974.124:3): avc:  denied  { getattr } for  pid=1256 comm="rhgb" name="installed-modules.scm" dev=sda5 ino=3670041 scontext=system_u:system_r:rhgb_t:s0 tcontext=user_u:object_r:var_lib_t:s0 tclass=file
>audit(1189706974.124:4): avc:  denied  { read } for  pid=1256 comm="rhgb" name="installed-modules.scm" dev=sda5 ino=3670041 scontext=system_u:system_r:rhgb_t:s0 tcontext=user_u:object_r:var_lib_t:s0 tclass=file
>audit(1189706974.318:5): avc:  denied  { write } for  pid=1256 comm="rhgb" name="uimhelper-root" dev=sda5 ino=4030468 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:tmp_t:s0 tclass=sock_file
>No dock devices found.
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input4
>ACPI: Sleep Button (CM) [SLPB]
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda5, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda6, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>audit(1189706979.412:6): avc:  denied  { write } for  pid=1256 comm="rhgb" name="uimhelper-root" dev=sda5 ino=4030468 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:tmp_t:s0 tclass=sock_file
>audit(1189706979.418:7): avc:  denied  { write } for  pid=1465 comm="uim-helper-serv" name="tmp" dev=sda5 ino=4030465 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:tmp_t:s0 tclass=dir
>audit(1189706979.418:8): avc:  denied  { remove_name } for  pid=1465 comm="uim-helper-serv" name="uimhelper-root" dev=sda5 ino=4030468 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:tmp_t:s0 tclass=dir
>audit(1189706979.418:9): avc:  denied  { unlink } for  pid=1465 comm="uim-helper-serv" name="uimhelper-root" dev=sda5 ino=4030468 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:tmp_t:s0 tclass=sock_file
>audit(1189706979.429:10): avc:  denied  { add_name } for  pid=1465 comm="uim-helper-serv" name="uimhelper-root" scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:tmp_t:s0 tclass=dir
>audit(1189706979.429:11): avc:  denied  { create } for  pid=1465 comm="uim-helper-serv" name="uimhelper-root" scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:tmp_t:s0 tclass=sock_file
>audit(1189706979.429:12): avc:  denied  { setattr } for  pid=1465 comm="uim-helper-serv" name="uimhelper-root" dev=sda5 ino=4030468 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:tmp_t:s0 tclass=sock_file
>audit(1189706979.429:13): avc:  denied  { connectto } for  pid=1256 comm="rhgb" name="uimhelper-root" scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:system_r:rhgb_t:s0 tclass=unix_stream_socket
>Adding 1028120k swap on /dev/sda7.  Priority:-1 extents:1 across:1028120k
>Adding 4192892k swap on /dev/sdb6.  Priority:-2 extents:1 across:4192892k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>audit(1189706987.712:14): audit_pid=1901 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (4060 buckets, 32480 max)
>i2c-adapter i2c-0: lm85: Detected SMSC chip
>i2c-adapter i2c-0: lm85: Unrecognized version/stepping 0x68 Defaulting to Generic LM85.
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth2: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3276804
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3276806
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3276807
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3276805
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3276810
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3276811
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3440703
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3407933
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3309577
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3407924
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3440646
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3440701
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3342351
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3342395
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3342366
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3342363
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3342437
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3342397
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3342468
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3309592
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3342360
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3407930
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3440681
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3342358
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3440687
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3342411
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3407878
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3309572
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3309571
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3309620
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3309576
>inode_doinit_with_dentry:  context_to_sid(system_u:object_r:var_tmp_t:s0) returned 22 for dev=sda5 ino=3309746

Actions: View

Attachments on bug 289711: 194921