Attachment 196341 Details for Bug 291911 – dmesg output after model=auto

dmesg output after model=auto

dmesg (text/plain), 27.61 KB, created by Rohan Dhruva on 2007-09-15 07:34:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Rohan Dhruva

Created: 2007-09-15 07:34:58 UTC

Size: 27.61 KB

patch

obsolete

>Linux version 2.6.23-0.164.rc5.fc8 (kojibuilder@) (gcc version 4.1.2 20070821 (Red Hat 4.1.2-20)) #1 SMP Tue Sep 4 19:20:43 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
> BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001f690000 (usable)
> BIOS-e820: 000000001f690000 - 000000001f700000 (ACPI NVS)
> BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>502MB LOWMEM available.
>found SMP MP-table at 000f6690
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 128656) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   128656
>  HighMem    128656 ->   128656
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   128656
>On node 0 totalpages: 128656
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4040 pages, LIFO batch:0
>  Normal zone: 1702 pages used for memmap
>  Normal zone: 122858 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F6660, 0024 (r2 PTLTD )
>ACPI: XSDT 1F6923A1, 0074 (r1 ACRSYS ACRPRDCT  6040000  LTP        0)
>ACPI: FACP 1F69BC38, 00F4 (r3 INTEL  CALISTGA  6040000 ALAN        1)
>ACPI: DSDT 1F69302B, 8B99 (r1 INTEL  CALISTGA  6040000 MSFT  3000000)
>ACPI: FACS 1F69CFC0, 0040
>ACPI: APIC 1F69BD2C, 0068 (r1 INTEL  CALISTGA  6040000 LOHR       5A)
>ACPI: HPET 1F69BD94, 0038 (r1 INTEL  CALISTGA  6040000 LOHR       5A)
>ACPI: MCFG 1F69BDCC, 003C (r1 INTEL  CALISTGA  6040000 LOHR       5A)
>ACPI: APIC 1F69BE08, 005A (r1 PTLTD  	 APIC    6040000  LTP        0)
>ACPI: BOOT 1F69BE62, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>ACPI: SLIC 1F69BE8A, 0176 (r1 ACRSYS ACRPRDCT  6040000 acer        0)
>ACPI: SSDT 1F692DB1, 027A (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>ACPI: SSDT 1F6928FB, 04B6 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>ACPI: SSDT 1F692415, 04E6 (r1  PmRef    CpuPm     3000 INTL 20050624)
>ACPI: BIOS bug: multiple APIC/MADT found, using 0
>ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:14 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
>swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
>swsusp: Registered nosave memory region: 00000000000dc000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 00000000000e4000
>swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 126898
>Kernel command line: initrd=initrd.img root=CDLABEL=Fedora-7.91-i386 rootfstype=iso9660 ro quiet liveimg rhgb  BOOT_IMAGE=vmlinuz 
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0811000 soft=c07f1000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 1866.926 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1024 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 494760k/514624k available (2268k kernel code, 19256k reserved, 1166k data, 568k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0000000 - 0xff7fe000   ( 503 MB)
>    lowmem  : 0xc0000000 - 0xdf690000   ( 502 MB)
>      .init : 0xc0760000 - 0xc07ee000   ( 568 kB)
>      .data : 0xc0637016 - 0xc075aa44   (1166 kB)
>      .text : 0xc0400000 - 0xc0637016   (2268 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 3738.32 BogoMIPS (lpj=1869163)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9f3ff 00100000 00000000 00002940 0000c189 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20070126
>CPU0: Intel Genuine Intel(R) CPU           T1350  @ 1.86GHz stepping 08
>Total of 1 processors activated (3738.32 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=604 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=856 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=3360 bytes
>khelper used greatest stack depth: 3160 bytes left
>Booting paravirtualized kernel on bare hardware
>khelper used greatest stack depth: 3084 bytes left
>Time: 11:29:11  Date: 08/15/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>Setting up standard PCI resources
>khelper used greatest stack depth: 2916 bytes left
>ACPI: EC: Look up EC in DSDT
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: System BIOS is requesting _OSI(Linux)
>ACPI: If "acpi_osi=Linux" works better,
>Please send dmidecode to linux-acpi@vger.kernel.org
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3)
>ACPI: Using IOAPIC for interrupt routing
>khelper used greatest stack depth: 2864 bytes left
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
>PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
>PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
>PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
>PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
>PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
>PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
>PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>Time: tsc clocksource has been installed.
>Switched to high resolution mode on CPU 0
>pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>pnp: 00:03: iomem range 0xfed00000-0xfed003ff could not be reserved
>khelper used greatest stack depth: 2760 bytes left
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: 34000000-340fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: 34100000-341fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bus 11, cardbus bridge: 0000:0a:09.0
>  IO window: 00003000-000030ff
>  IO window: 00003400-000034ff
>  PREFETCH window: 30000000-33ffffff
>  MEM window: 38000000-3bffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 3000-3fff
>  MEM window: d0200000-d02fffff
>  PREFETCH window: 30000000-33ffffff
>PCI: Enabling device 0000:00:1c.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Enabling device 0000:00:1c.1 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:0a:09.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:0a:09.0[A] -> GSI 20 (level, low) -> IRQ 19
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 7, 655360 bytes)
>TCP bind hash table entries: 16384 (order: 7, 589824 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 4517k freed
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1189855752.394:1): initialized
>Total HugeTLB memory allocated, 0
>khelper used greatest stack depth: 2732 bytes left
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 5384AE3DFA2FAAA3
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>Allocate Port Service[0000:00:1c.2:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI Exception (processor_core-0798): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI: Thermal Zone [THRM] (38 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>hpet_resources: 0xfed00000 is busy
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xc0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:0a:09.0 [1025:0110]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:0a:09.0, mfunc 0x01321b22, devctl 0x66
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 19
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>cs: IO port probe 0x3000-0x3fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 7:237:479
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 568k freed
>Write protecting the kernel read-only data: 865k
>mknod used greatest stack depth: 2716 bytes left
>mount used greatest stack depth: 2560 bytes left
>SCSI subsystem initialized
>modprobe used greatest stack depth: 2296 bytes left
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>libata version 2.21 loaded.
>Marking TSC unstable due to: possible TSC halt in C2.
>Time: hpet clocksource has been installed.
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd0644000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>modprobe used greatest stack depth: 1868 bytes left
>Clocksource tsc unstable (delta = -353569744 ns)
>usb 2-7: new high speed USB device using ehci_hcd and address 3
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15
>usb 2-7: configuration #1 chosen from 1 choice
>usb 3-2: new low speed USB device using uhci_hcd and address 2
>ata1.00: ATA-7: WDC WD1200UE-22KVT0, 01.03K01, max UDMA/100
>ata1.00: 234441648 sectors, multi 16: LBA48 
>ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L632D, SC03, max UDMA/33
>ata1.00: configured for UDMA/100
>usb 3-2: configuration #1 chosen from 1 choice
>input: HID 062a:0000 as /class/input/input3
>input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.1-2
>ata1.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200UE-22K 01.0 PQ: 0 ANSI: 5
>scsi 0:0:1:0: CD-ROM            TSSTcorp CD/DVDW TS-L632D SC03 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>modprobe used greatest stack depth: 1392 bytes left
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda4 < sda5 sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ISO 9660 Extensions: Microsoft Joliet Level 3
>Unable to load NLS charset utf8
>Unable to load NLS charset utf8
>ISO 9660 Extensions: RRIP_1991A
>mount used greatest stack depth: 1152 bytes left
>loop: module loaded
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1189855762.039:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  5 users, 11 roles, 2244 types, 106 bools, 1 sens, 1024 cats
>security:  67 classes, 224474 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=43262
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=42943
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=42942
>SELinux: initialized (dev loop120, type squashfs), not configured for labeling
>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1189855764.573:3): policy loaded auid=4294967295
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input7
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: AC Adapter [ACAD] (on-line)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 0:0:1:0: Attached scsi generic sg1 type 5
>PCI: Enabling device 0000:02:00.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>sky2 0000:02:00.0: v1.17 addr 0x34000000 irq 16 Yukon-FE (0xb7) rev 1
>sky2 eth0: addr 00:16:36:9c:72:6c
>input: Video Bus as /class/input/input8
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 21
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:0a:09.2[A] -> GSI 20 (level, low) -> IRQ 19
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.1.8kd
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945BG Network Connection
>iwl3945: Radio Frequency Kill Switch is On:
>Kill switch must be turned off for wireless networking to work.
>iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
>iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
>iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
>iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
>iwl3945: Tunable channels: 13 802.11bg, 0 802.11a channels
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>floppy0: no floppy controllers found
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: ACPI Dock Station Driver 
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>audit(1189870232.450:4): avc:  denied  { read write } for  pid=2599 comm="blkid" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:fsadm_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>audit(1189870232.451:5): avc:  denied  { read write } for  pid=2599 comm="blkid" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:fsadm_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>audit(1189870233.498:6): avc:  denied  { read write } for  pid=2601 comm="swapon" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:fsadm_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>audit(1189870233.498:7): avc:  denied  { read write } for  pid=2601 comm="swapon" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:fsadm_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>audit(1189870233.498:8): avc:  denied  { read write } for  pid=2601 comm="swapon" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:fsadm_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>Adding 1052216k swap on /dev/sda7.  Priority:-1 extents:1 across:1052216k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>net eth1: device_rename: sysfs_create_symlink failed (-17)
>audit(1189870247.395:9): audit_pid=2702 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>avahi-daemon[3020]: segfault at 00000000 eip 0804cc50 esp bfbca290 error 4
>sky2 eth1: enabling interface
>sky2 eth1: ram buffer 4K
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>sky2 eth1: Link is up at 100 Mbps, full duplex, flow control rx
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>eth1: no IPv6 routers present
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>SELinux: initialized (dev sda6, type vfat), uses genfs_contexts

Actions: View

Attachments on bug 291911: 196311 | 196321 | 196331 | 196341 | 196361 | 196371 | 196381 | 196391 | 204491 | 204501