Attachment 197601 Details for Bug 242766 – output of "dmesg"

output of "dmesg"

dmesg.txt (text/plain), 15.13 KB, created by Andre Robatino on 2007-09-17 16:24:36 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andre Robatino

Created: 2007-09-17 16:24:36 UTC

Size: 15.13 KB

patch

obsolete

>Linux version 2.6.22.5-49.fc6 (brewbuilder@hs20-bc1-5.build.redhat.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-13)) #1 SMP Thu Aug 30 14:25:46 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>255MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 65520) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->    65520
>  HighMem     65520 ->    65520
>early_node_map[1] active PFN ranges
>    0:        0 ->    65520
>On node 0 totalpages: 65520
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 479 pages used for memmap
>  Normal zone: 60945 pages, LIFO batch:15
>  HighMem zone: 0 pages used for memmap
>DMI not present or invalid.
>Using APIC driver default
>ACPI: RSDP 000FB560, 0014 (r0 AMI   )
>ACPI: RSDT 0FFF0000, 0028 (r1 AMIINT                 0 MSFT       97)
>ACPI: FACP 0FFF0030, 0074 (r1 AMIINT                 0 MSFT       97)
>ACPI: DSDT 0FFF00B0, 1796 (r1    VIA    VT498     1000 MSFT  1000007)
>ACPI: FACS 0FFF8000, 0040
>ACPI: no DMI BIOS year, acpi=force is required to enable ACPI
>ACPI: acpi=force override
>ACPI: PM-Timer IO Port: 0x5008
>Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
>Built 1 zonelists.  Total pages: 65009
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 acpi=force
>No local APIC present or hardware disabled
>mapped APIC to ffffd000 (0120b000)
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07cd000 soft=c07ad000
>PID hash table entries: 1024 (order: 10, 4096 bytes)
>Detected 250.086 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Memory: 252252k/262080k available (2253k kernel code, 9272k reserved, 1204k data, 264k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xd0800000 - 0xff7fe000   ( 751 MB)
>    lowmem  : 0xc0000000 - 0xcfff0000   ( 255 MB)
>      .init : 0xc0766000 - 0xc07a8000   ( 264 kB)
>      .data : 0xc0633508 - 0xc0760584   (1204 kB)
>      .text : 0xc0400000 - 0xc0633508   (2253 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 501.14 BogoMIPS (lpj=250574)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0080a135 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0080a135 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: After all inits, caps: 0080a135 00000000 00000000 00000004 00000000 00000000 00000000
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0e00)
>CPU0: Cyrix M II 3x Core/Bus Clock stepping 04
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1536 bytes
>Time: 15:56:48  Date: 08/17/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [NRTH] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: PCI Interrupt Routing Table [\_SB_.NRTH._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: Power Resource [GLED] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>pnp: 00:01: ioport range 0x5006-0x5007 has been reserved
>pnp: 00:01: ioport range 0x5010-0x50ff has been reserved
>pnp: 00:02: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:02: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:02: iomem range 0x100000-0xfffffff could not be reserved
>pnp: 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: d000-dfff
>  MEM window: fca00000-feafffff
>  PREFETCH window: f4800000-f48fffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>TCP established hash table entries: 8192 (order: 4, 98304 bytes)
>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 8192 bind 8192)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2136k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1190044610.241:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key C04F19BEB3D31305
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>Activating ISA DMA hang workarounds.
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>isapnp: Scanning for PnP cards...
>isapnp: Card 'Crystal CS4235'
>isapnp: 1 Plug & Play card detected total
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected VIA Apollo MVP3 chipset
>agpgart: AGP aperture is 64M @ 0xf8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Marking TSC unstable due to: possible TSC halt in C2.
>Time: acpi_pm clocksource has been installed.
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Clocksource tsc unstable (delta = -238068381 ns)
>serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller at PCI slot 0000:00:07.1
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt82c596a (rev 06) IDE UDMA33 controller on pci0000:00:07.1
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: WDC WD1200BB-00CAA1, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: _NEC DVD_RW ND-2510A, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
>hda: cache flushes not supported
> hda: hda1 hda2
>ide-floppy driver 0.99.newide
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 7:776:942
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 264k freed
>Write protecting the kernel read-only data: 927k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 10, io base 0x0000ea00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1190044615.740:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1657 types, 211 bools, 1 sens, 1024 cats
>security:  61 classes, 56319 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1190044616.437:3): policy loaded auid=4294967295
>hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>pnp: Device 01:01.01 activated.
>gameport: NS558 PnP Gameport is pnp01:01.01/gameport0, io 0x200, speed 523kHz
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>natsemi dp8381x driver, version 2.1, Sept 11, 2006
>  originally by Donald Becker <becker@scyld.com>
>  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>natsemi eth0: NatSemi DP8381[56] at 0xfebff000 (0000:00:13.0), 00:a0:cc:7a:b7:96, IRQ 11, port TP.
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>input: PC Speaker as /class/input/input3
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 524280k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:524280k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>eth0: DSPCFG accepted after 0 usec.
>eth0: link up.
>eth0: Setting full-duplex based on negotiated link capability.
>eth0: no IPv6 routers present
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (2047 buckets, 16376 max)
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>audit(1190044756.903:4): avc:  denied  { use } for  pid=2578 comm="hald" name="console" dev=tmpfs ino=985 scontext=system_u:system_r:hald_t:s0 tcontext=system_u:system_r:init_t:s0 tclass=fd
>audit(1190044756.903:5): avc:  denied  { use } for  pid=2578 comm="hald" name="console" dev=tmpfs ino=985 scontext=system_u:system_r:hald_t:s0 tcontext=system_u:system_r:init_t:s0 tclass=fd
>audit(1190044756.904:6): avc:  denied  { use } for  pid=2578 comm="hald" name="console" dev=tmpfs ino=985 scontext=system_u:system_r:hald_t:s0 tcontext=system_u:system_r:init_t:s0 tclass=fd
>pnp: Device 01:01.00 activated.
>pnp: Device 01:01.02 activated.
>pnp: Device 01:01.03 activated.

Actions: View

Attachments on bug 242766: 197571 | 197581 | 197591 | 197601 | 216691 | 216701 | 216711 | 216911 | 217781 | 217791 | 236941 | 236951 | 236961 | 290514 | 290515 | 290516 | 290517 | 290518 | 290519 | 290566