Attachment 1980479 Details for Bug 2227273 – File: storage.log

File: storage.log

storage.log (text/plain), 63.28 KB, created by Jose Fernandez on 2023-07-28 15:17:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jose Fernandez

Created: 2023-07-28 15:17:03 UTC

Size: 63.28 KB

patch

obsolete

>DEBUG:anaconda.modules.common:The configuration is loaded from: ['/run/anaconda/anaconda.conf']
>DEBUG:blivet:registered device format class DeviceFormat as None
>DEBUG:blivet:registered device format class BIOSBoot as biosboot
>DEBUG:blivet:registered device format class DiskLabel as disklabel
>DEBUG:blivet:registered device format class DMRaidMember as dmraidmember
>INFO:program:Running [1] mkdosfs --help ...
>INFO:program:stdout[1]: mkfs.fat 4.2 (2021-01-31)
>
>INFO:program:stderr[1]: Usage: mkdosfs [OPTIONS] TARGET [BLOCKS]
>Create FAT filesystem in TARGET, which can be a block device or file. Use only
>up to BLOCKS 1024 byte blocks if specified. With the -C option, file TARGET will be
>created with a size of 1024 bytes times BLOCKS, which must be specified.
>
>Options:
>  -a              Disable alignment of data structures
>  -A              Toggle Atari variant of the filesystem
>  -b SECTOR       Select SECTOR as location of the FAT32 backup boot sector
>  -c              Check device for bad blocks before creating the filesystem
>  -C              Create file TARGET then create filesystem in it
>  -D NUMBER       Write BIOS drive number NUMBER to boot sector
>  -f COUNT        Create COUNT file allocation tables
>  -F SIZE         Select FAT size SIZE (12, 16 or 32)
>  -g GEOM         Select disk geometry: heads/sectors_per_track
>  -h NUMBER       Write hidden sectors NUMBER to boot sector
>  -i VOLID        Set volume ID to VOLID (a 32 bit hexadecimal number)
>  -I              Ignore and disable safety checks
>  -l FILENAME     Read bad blocks list from FILENAME
>  -m FILENAME     Replace default error message in boot block with contents of FILENAME
>  -M TYPE         Set media type in boot sector to TYPE
>  --mbr[=y|n|a]   Fill (fake) MBR table with one partition which spans whole disk
>  -n LABEL        Set volume name to LABEL (up to 11 characters long)
>  --codepage=N    use DOS codepage N to encode label (default: 850)
>  -r COUNT        Make room for at least COUNT entries in the root directory
>  -R COUNT        Set minimal number of reserved sectors to COUNT
>  -s COUNT        Set number of sectors per cluster to COUNT
>  -S SIZE         Select a sector size of SIZE (a power of two, at least 512)
>  -v              Verbose execution
>  --variant=TYPE  Select variant TYPE of filesystem (standard or Atari)
>
>  --invariant     Use constants for randomly generated or time based values
>  --offset=SECTOR Write the filesystem at a specific sector into the device file.
>  --help          Show this help message and exit
>
>INFO:program:...done [1] (exit code: 0)
>DEBUG:blivet:registered device format class Ext2FS as ext2
>DEBUG:blivet:registered device format class Ext3FS as ext3
>DEBUG:blivet:registered device format class Ext4FS as ext4
>DEBUG:blivet:registered device format class FATFS as vfat
>DEBUG:blivet:registered device format class EFIFS as efi
>DEBUG:blivet:registered device format class BTRFS as btrfs
>DEBUG:blivet:registered device format class GFS2 as gfs2
>DEBUG:blivet:registered device format class JFS as jfs
>DEBUG:blivet:registered device format class ReiserFS as reiserfs
>DEBUG:blivet:registered device format class XFS as xfs
>DEBUG:blivet:registered device format class StratisXFS as stratis xfs
>DEBUG:blivet:registered device format class HFS as hfs
>DEBUG:blivet:registered device format class AppleBootstrapFS as appleboot
>DEBUG:blivet:registered device format class HFSPlus as hfs+
>DEBUG:blivet:registered device format class MacEFIFS as macefi
>DEBUG:blivet:registered device format class NTFS as ntfs
>DEBUG:blivet:registered device format class ExFATFS as exfat
>DEBUG:blivet:registered device format class F2FS as f2fs
>DEBUG:blivet:registered device format class NFS as nfs
>DEBUG:blivet:registered device format class NFSv4 as nfs4
>DEBUG:blivet:registered device format class Iso9660FS as iso9660
>DEBUG:blivet:registered device format class NoDevFS as nodev
>DEBUG:blivet:registered device format class DevPtsFS as devpts
>DEBUG:blivet:registered device format class ProcFS as proc
>DEBUG:blivet:registered device format class SysFS as sysfs
>DEBUG:blivet:registered device format class TmpFS as tmpfs
>DEBUG:blivet:registered device format class BindFS as bind
>DEBUG:blivet:registered device format class SELinuxFS as selinuxfs
>DEBUG:blivet:registered device format class USBFS as usbfs
>DEBUG:blivet:registered device format class EFIVarFS as efivarfs
>INFO:program:Running [2] lvm version ...
>INFO:program:stdout[2]:   LVM version:     2.03.17(2) (2022-11-10)
>  Library version: 1.02.187 (2022-11-10)
>  Driver version:  4.47.0
>  Configuration:   ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-default-dm-run-dir=/run --with-default-run-dir=/run/lvm --with-default-pid-dir=/run --with-default-locking-dir=/run/lock/lvm --with-usrlibdir=/usr/lib64 --enable-fsadm --enable-write_install --with-user= --with-group= --with-device-uid=0 --with-device-gid=6 --with-device-mode=0660 --enable-pkgconfig --enable-cmdlib --enable-dmeventd --enable-blkid_wiping --with-cluster=internal --with-udevdir=/usr/lib/udev/rules.d --enable-udev_sync --with-thin=internal --with-cache=internal --enable-lvmpolld --enable-lvmlockd-dlm --enable-lvmlockd-dlmcontrol --enable-lvmlockd-sanlock --enable-dbus-service --enable-notify-dbus --enable-dmfilemapd --with-writecache=internal --with-vdo=internal --with-vdo-format=/usr/bin/vdoformat --with-integrity=internal --with-default-use-devices-file=1 --disable-silent-rules --enable-app-machineid --enable-editline --disable-readline
>
>INFO:program:stderr[2]: 
>INFO:program:...done [2] (exit code: 0)
>DEBUG:blivet:registered device format class LUKS as luks
>DEBUG:blivet:registered device format class Integrity as integrity
>DEBUG:blivet:registered device format class LVMPhysicalVolume as lvmpv
>DEBUG:blivet:registered device format class MDRaidMember as mdmember
>DEBUG:blivet:registered device format class MultipathMember as multipath_member
>DEBUG:blivet:registered device format class PPCPRePBoot as prepboot
>DEBUG:blivet:registered device format class SwapSpace as swap
>DEBUG:blivet:registered device format class StratisBlockdev as stratis
>INFO:program:Running... udevadm trigger --action=change --subsystem-match=block
>DEBUG:program:Return code: 0
>INFO:program:Running... udevadm settle --timeout=300
>DEBUG:program:Return code: 0
>INFO:blivet:failed to get initiator name from iscsi firmware: Failed to call GetFirmwareInitiatorName method on /org/freedesktop/UDisks2/Manager with None arguments: GDBus.Error:org.freedesktop.UDisks2.Error.ISCSI.NoFirmware: No firmware found
>DEBUG:anaconda.modules.storage.bootloader.bootloader:The default type is set to 'BootloaderType.DEFAULT'.
>DEBUG:anaconda.modules.storage.fcoe.fcoe:Start up the FCoE module.
>INFO:program:Running... modprobe libfc
>DEBUG:program:Return code: 0
>INFO:program:Running... /usr/libexec/fcoe/fcoe_edd.sh -i
>INFO:program:stdout:
>INFO:program:No FCoE boot disk information is found in EDD!
>DEBUG:program:Return code: 1
>INFO:blivet:No FCoE EDD info found: No FCoE boot disk information is found in EDD!
>DEBUG:anaconda.modules.storage.iscsi.iscsi:Start up the iSCSI module.
>INFO:blivet:ISCSID is /sbin/iscsid
>INFO:program:Running... systemctl start iscsi-init.service
>DEBUG:program:Return code: 0
>INFO:blivet:no initiator set
>DEBUG:anaconda.modules.storage.zfcp.zfcp:Start up the zFCP module.
>INFO:program:Running [3] e2fsck -V ...
>INFO:program:stdout[3]: 
>INFO:program:stderr[3]: e2fsck 1.46.5 (30-Dec-2021)
>	Using EXT2FS Library version 1.46.5, 30-Dec-2021
>
>INFO:program:...done [3] (exit code: 0)
>DEBUG:blivet:               Ext4FS.supported: supported: True ;
>DEBUG:blivet:get_format('ext4') returning Ext4FS instance with object id 0
>DEBUG:blivet:            Ext4FS.supported: supported: True ;
>DEBUG:blivet:trying to set new default fstype to 'ext4'
>DEBUG:blivet:                  Ext4FS.supported: supported: True ;
>DEBUG:blivet:get_format('ext4') returning Ext4FS instance with object id 1
>DEBUG:blivet:               Ext4FS.supported: supported: True ;
>INFO:program:Running... lsblk --bytes -a -o NAME,SIZE,OWNER,GROUP,MODE,FSTYPE,LABEL,UUID,PARTUUID,MOUNTPOINT
>INFO:program:stdout:
>INFO:program:NAME                 SIZE OWNER GROUP MODE       FSTYPE      LABEL                    UUID                                 PARTUUID                             MOUNTPOINT
>INFO:program:loop0           778326016 root  disk  brw-rw---- squashfs                                                                                                       
>INFO:program:loop1          3221225472 root  disk  brw-rw---- ext4        Anaconda                 5d0a7ae2-cf27-4de3-b9d2-da729fdadfbd                                      
>INFO:program:|-live-rw      3221225472 root  disk  brw-rw---- ext4        Anaconda                 5d0a7ae2-cf27-4de3-b9d2-da729fdadfbd                                      /
>INFO:program:`-live-base    3221225472 root  disk  brw-rw---- ext4        Anaconda                 5d0a7ae2-cf27-4de3-b9d2-da729fdadfbd                                      
>INFO:program:loop2         34359738368 root  disk  brw-rw----                                                                                                                
>INFO:program:`-live-rw      3221225472 root  disk  brw-rw---- ext4        Anaconda                 5d0a7ae2-cf27-4de3-b9d2-da729fdadfbd                                      /
>INFO:program:sda                     0 root  disk  brw-rw----                                                                                                                
>INFO:program:sdb           15376318464 root  disk  brw-rw---- iso9660     RHEL-9-2-0-BaseOS-x86_64 2023-04-13-16-58-02-00                                                    /run/install/repo
>INFO:program:|-sdb1         9595613184 root  disk  brw-rw---- iso9660     RHEL-9-2-0-BaseOS-x86_64 2023-04-13-16-58-02-00               d3d1f9a5-01                          
>INFO:program:`-sdb2            7264256 root  disk  brw-rw---- vfat        ANACONDA                 4889-B939                            d3d1f9a5-02                          
>INFO:program:zram0          8589934592 root  disk  brw-rw----                                                                                                                [SWAP]
>INFO:program:nvme1n1      500107862016 root  disk  brw-rw----                                                                                                                
>INFO:program:|-nvme1n1p1    1073741824 root  disk  brw-rw---- vfat        EFI                      4DF5-C68C                            66b26b19-018a-4567-bae1-0d0419af15a3 
>INFO:program:|-nvme1n1p2    2147483648 root  disk  brw-rw---- ext4        BOOT                     543c0f25-9ff9-4bbd-879a-846757d6e82d 2ef6489d-f103-4a1c-923b-864a2e22a270 
>INFO:program:|-nvme1n1p3  107376279552 root  disk  brw-rw---- crypto_LUKS                          f33c226d-0ee7-4808-a2a5-dcffb2abd016 9e769044-0608-40d1-944b-fa05ec67ffdf 
>INFO:program:|-nvme1n1p4  107374182400 root  disk  brw-rw---- crypto_LUKS                          1b4573e6-7f42-42e0-a5a6-01cdd6a4034d ef152705-7eaa-4693-a2f0-4b013b8306aa 
>INFO:program:|-nvme1n1p5   34361835520 root  disk  brw-rw---- crypto_LUKS                          9abcfb1d-2f96-4c86-96a9-c1bc4badd7c7 2e6f9e00-2049-4dec-b4d7-32f2c916f1ae 
>INFO:program:`-nvme1n1p6  247773265920 root  disk  brw-rw---- crypto_LUKS                          479ab4fe-5db2-4d76-8c59-919073155559 16ed28f0-bced-4db2-8e05-f094356ca6d3 
>INFO:program:nvme0n1     1024209543168 root  disk  brw-rw----                                                                                                                
>INFO:program:`-nvme0n1p1 1024208142336 root  disk  brw-rw---- crypto_LUKS                          13bd40a8-8d71-4227-afa6-2d6fdbef971c d7e62b2b-967c-472c-a6fc-b71b8adb676b 
>DEBUG:program:Return code: 0
>DEBUG:blivet:lsblk output:
>NAME                 SIZE OWNER GROUP MODE       FSTYPE      LABEL                    UUID                                 PARTUUID                             MOUNTPOINT
>loop0           778326016 root  disk  brw-rw---- squashfs                                                                                                       
>loop1          3221225472 root  disk  brw-rw---- ext4        Anaconda                 5d0a7ae2-cf27-4de3-b9d2-da729fdadfbd                                      
>|-live-rw      3221225472 root  disk  brw-rw---- ext4        Anaconda                 5d0a7ae2-cf27-4de3-b9d2-da729fdadfbd                                      /
>`-live-base    3221225472 root  disk  brw-rw---- ext4        Anaconda                 5d0a7ae2-cf27-4de3-b9d2-da729fdadfbd                                      
>loop2         34359738368 root  disk  brw-rw----                                                                                                                
>`-live-rw      3221225472 root  disk  brw-rw---- ext4        Anaconda                 5d0a7ae2-cf27-4de3-b9d2-da729fdadfbd                                      /
>sda                     0 root  disk  brw-rw----                                                                                                                
>sdb           15376318464 root  disk  brw-rw---- iso9660     RHEL-9-2-0-BaseOS-x86_64 2023-04-13-16-58-02-00                                                    /run/install/repo
>|-sdb1         9595613184 root  disk  brw-rw---- iso9660     RHEL-9-2-0-BaseOS-x86_64 2023-04-13-16-58-02-00               d3d1f9a5-01                          
>`-sdb2            7264256 root  disk  brw-rw---- vfat        ANACONDA                 4889-B939                            d3d1f9a5-02                          
>zram0          8589934592 root  disk  brw-rw----                                                                                                                [SWAP]
>nvme1n1      500107862016 root  disk  brw-rw----                                                                                                                
>|-nvme1n1p1    1073741824 root  disk  brw-rw---- vfat        EFI                      4DF5-C68C                            66b26b19-018a-4567-bae1-0d0419af15a3 
>|-nvme1n1p2    2147483648 root  disk  brw-rw---- ext4        BOOT                     543c0f25-9ff9-4bbd-879a-846757d6e82d 2ef6489d-f103-4a1c-923b-864a2e22a270 
>|-nvme1n1p3  107376279552 root  disk  brw-rw---- crypto_LUKS                          f33c226d-0ee7-4808-a2a5-dcffb2abd016 9e769044-0608-40d1-944b-fa05ec67ffdf 
>|-nvme1n1p4  107374182400 root  disk  brw-rw---- crypto_LUKS                          1b4573e6-7f42-42e0-a5a6-01cdd6a4034d ef152705-7eaa-4693-a2f0-4b013b8306aa 
>|-nvme1n1p5   34361835520 root  disk  brw-rw---- crypto_LUKS                          9abcfb1d-2f96-4c86-96a9-c1bc4badd7c7 2e6f9e00-2049-4dec-b4d7-32f2c916f1ae 
>`-nvme1n1p6  247773265920 root  disk  brw-rw---- crypto_LUKS                          479ab4fe-5db2-4d76-8c59-919073155559 16ed28f0-bced-4db2-8e05-f094356ca6d3 
>nvme0n1     1024209543168 root  disk  brw-rw----                                                                                                                
>`-nvme0n1p1 1024208142336 root  disk  brw-rw---- crypto_LUKS                          13bd40a8-8d71-4227-afa6-2d6fdbef971c d7e62b2b-967c-472c-a6fc-b71b8adb676b 
>
>DEBUG:blivet:lvm filter: clearing the lvm devices list
>DEBUG:blivet:lvm filter: clearing the lvm devices list
>DEBUG:blivet:trying to set new default fstype to 'xfs'
>DEBUG:blivet:                XFS.supported: supported: True ;
>INFO:program:Running... modprobe --dry-run xfs
>DEBUG:program:Return code: 0
>DEBUG:blivet:get_format('xfs') returning XFS instance with object id 2
>DEBUG:blivet:             XFS.supported: supported: True ;
>DEBUG:anaconda.storage:trying to set new default luks version to 'luks2'
>DEBUG:blivet:              LUKS.__init__: luks_version: luks2 ;
>DEBUG:blivet:get_format('luks') returning LUKS instance with object id 3
>DEBUG:anaconda.modules.storage.storage:The storage model has changed.
>DEBUG:anaconda.modules.common.base.base:Publish the service.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/Checker.
>INFO:anaconda.core.dbus:Connecting to the Anaconda bus at unix:abstract=/tmp/dbus-66QjySMHVi,guid=5b809bc8ea6006379a86449964c3d84a.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/DeviceTree.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/DiskInitialization.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/DiskSelection.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/Snapshot.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/Bootloader.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/FCoE.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/iSCSI.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/NVDIMM.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/DASD.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/zFCP.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage.
>DEBUG:dasbus.connection:Registering a service name org.fedoraproject.Anaconda.Modules.Storage.
>DEBUG:anaconda.modules.common.base.base:Start the loop.
>DEBUG:anaconda.modules.common.base.base:Locale is set to en_US.UTF-8.
>DEBUG:anaconda.modules.storage.checker.checker:Constraint 'min_ram' is set to '429916160'.
>DEBUG:anaconda.modules.storage.disk_selection.selection:Disk images are set to '{}'.
>DEBUG:blivet:failed to resolve 'LABEL=RHEL-9-2-0-BaseOS-x86_64'
>DEBUG:blivet:                   DeviceTree.get_device_by_path: path: /dev/zram0 ; incomplete: False ; hidden: False ;
>DEBUG:blivet:                   DeviceTree.get_device_by_path returned None
>DEBUG:blivet:failed to resolve '/dev/zram0'
>DEBUG:anaconda.modules.storage.disk_selection.selection:Protected devices are set to '['LABEL=RHEL-9-2-0-BaseOS-x86_64', '/dev/zram0']'.
>DEBUG:anaconda.storage:Creating a copy of the storage model.
>DEBUG:anaconda.storage:starting Blivet copy
>DEBUG:anaconda.storage:finished Blivet copy
>DEBUG:anaconda.storage:Finished a copy of the storage model.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/Task/1.
>INFO:anaconda.threading:Running Thread: AnaTaskThread-ScanDevicesTask-1 (139806506788416)
>INFO:program:Running... systemctl start iscsi-init.service
>DEBUG:program:Return code: 0
>INFO:blivet:no initiator set
>INFO:blivet:resetting Blivet (version 3.6.0) instance <pyanaconda.modules.storage.devicetree.model.InstallerStorage object at 0x7f273d4147f0>
>DEBUG:blivet:lvm filter: clearing the lvm devices list
>INFO:blivet:DeviceTree.populate: ignored_disks is [] ; exclusive_disks is []
>WARNING:blivet:Failed to call the update_volume_info method: libstoragemgmt functionality not available
>INFO:program:Running [4] multipath --version ...
>INFO:program:stdout[4]: 
>INFO:program:stderr[4]: Unknown switch: (null)
>multipath-tools v0.8.7 (09/08, 2021)
>Usage:
>  multipath [-v level] [-B|-d|-i|-q|-r] [-b file] [-p policy] [device]
>  multipath [-v level] [-R retries] -f device
>  multipath [-v level] [-R retries] -F
>  multipath [-v level] [-l|-ll] [device]
>  multipath [-v level] [-a|-w] device
>  multipath [-v level] [-A|-W]
>  multipath [-v level] [-i] [-c|-C] device
>  multipath [-v level] [-i] [-u|-U]
>  multipath [-h|-t|-T]
>
>Where:
>  -h      print this usage text
>  -l      show multipath topology (sysfs and DM info)
>  -ll     show multipath topology (maximum info)
>  -e      enable foreign libraries with -l/-ll
>  -f      flush a multipath device map
>  -F      flush all multipath device maps
>  -a      add a device wwid to the wwids file
>  -A      add devices from kernel command line mpath.wwids
>          parameters to wwids file
>  -c      check if a device should be a path in a multipath device
>  -C      check if a multipath device has usable paths
>  -q      allow queue_if_no_path when multipathd is not running
>  -d      dry run, do not create or update devmaps
>  -t      display the currently used multipathd configuration
>  -T      display the multipathd configuration without builtin defaults
>  -r      force devmap reload
>  -i      ignore wwids file
>  -B      treat the bindings file as read only
>  -b fil  bindings file location
>  -w      remove a device from the wwids file
>  -W      reset the wwids file include only the current devices
>  -R num  number of times to retry removes of in-use devices
>  -u      check if the device specified in the program environment should be a
>          path in a multipath device
>  -U      check if the device specified in the program environment is a
>          multipath device with usable paths, see -C flag
>  -p pol  force all maps to specified path grouping policy:
>          . failover            one path per priority group
>          . multibus            all paths in one priority group
>          . group_by_serial     one priority group per serial
>          . group_by_prio       one priority group per priority lvl
>          . group_by_node_name  one priority group per target node
>  -v lvl  verbosity level:
>          . 0 no output
>          . 1 print created devmap names only
>          . 2 default verbosity
>          . 3 print debug information
>  device  action limited to:
>          . multipath named 'device' (ex: mpath0)
>          . multipath whose wwid is 'device' (ex: 60051...)
>          . multipath including the path named 'device' (ex: /dev/sda or
>            /dev/dm-0)
>          . multipath including the path with maj:min 'device' (ex: 8:0)
>
>INFO:program:...done [4] (exit code: 1)
>INFO:program:Running [5] mpathconf --find_multipaths y --user_friendly_names y --with_multipathd y ...
>INFO:program:stdout[5]: 
>INFO:program:stderr[5]: 
>INFO:program:...done [5] (exit code: 0)
>INFO:program:Running... udevadm settle --timeout=300
>DEBUG:program:Return code: 0
>DEBUG:testdata:sysfs attr /sys/class/block/sdb/device/model: 4372757a6572204669742020202020200a
>DEBUG:testdata:sysfs attr /sys/class/block/sda/device/model: 53442f4d4d43204352572020202020200a
>DEBUG:testdata:sysfs attr /sys/class/block/nvme0n1/device/model: 5043363031204e564d6520534b2068796e69782031544220202020202020202020202020202020200a
>DEBUG:testdata:sysfs attr /sys/class/block/nvme1n1/device/model: 53616d73756e6720535344203938302050524f2035303047422020202020202020202020202020200a
>INFO:blivet:devices to scan: ['sdb', 'sdb1', 'sdb2', 'sda', 'nvme0n1', 'nvme0n1p1', 'nvme1n1', 'nvme1n1p1', 'nvme1n1p2', 'nvme1n1p3', 'nvme1n1p4', 'nvme1n1p5', 'nvme1n1p6', 'loop0', 'loop1', 'loop2', 'live-rw', 'live-base']
>DEBUG:blivet:                  DeviceTree.handle_device: name: sdb ; info: {'CURRENT_TAGS': ':systemd:',
> 'DEVLINKS': '/dev/disk/by-diskseq/4 /dev/disk/by-uuid/2023-04-13-16-58-02-00 '
>             '/dev/disk/by-label/RHEL-9-2-0-BaseOS-x86_64 '
>             '/dev/disk/by-path/pci-0000:00:14.0-usb-0:14:1.0-scsi-0:0:0:0 '
>             '/dev/disk/by-id/usb-SanDisk__Cruzer_Fit_03021431122121135113-0:0',
> 'DEVNAME': '/dev/sdb',
> 'DEVPATH': '/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/host0/target0:0:0/0:0:0:0/block/sdb',
> 'DEVTYPE': 'disk',
> 'DISKSEQ': '4',
> 'DM_MULTIPATH_DEVICE_PATH': '0',
> 'ID_BUS': 'usb',
> 'ID_DRIVE_THUMB': '1',
> 'ID_FS_BLOCKSIZE': '2048',
> 'ID_FS_BOOT_SYSTEM_ID': 'EL\\x20TORITO\\x20SPECIFICATION',
> 'ID_FS_DATA_PREPARER_ID': 'XORRISO-1.4.8\\x202017.09.12.143001\\x2c\\x20LIBISOBURN-1.4.8\\x2c\\x20LIBISOFS-1.4.8\\x2c\\x20LIBBURN-1.4.8',
> 'ID_FS_LABEL': 'RHEL-9-2-0-BaseOS-x86_64',
> 'ID_FS_LABEL_ENC': 'RHEL-9-2-0-BaseOS-x86_64',
> 'ID_FS_TYPE': 'iso9660',
> 'ID_FS_USAGE': 'filesystem',
> 'ID_FS_UUID': '2023-04-13-16-58-02-00',
> 'ID_FS_UUID_ENC': '2023-04-13-16-58-02-00',
> 'ID_FS_VERSION': 'Joliet Extension',
> 'ID_INSTANCE': '0:0',
> 'ID_MODEL': 'Cruzer_Fit',
> 'ID_MODEL_ENC': 'Cruzer\\x20Fit\\x20\\x20\\x20\\x20\\x20\\x20',
> 'ID_MODEL_ID': '5571',
> 'ID_PART_TABLE_TYPE': 'dos',
> 'ID_PART_TABLE_UUID': 'd3d1f9a5',
> 'ID_PATH': 'pci-0000:00:14.0-usb-0:14:1.0-scsi-0:0:0:0',
> 'ID_PATH_TAG': 'pci-0000_00_14_0-usb-0_14_1_0-scsi-0_0_0_0',
> 'ID_REVISION': '1.00',
> 'ID_SCSI': '1',
> 'ID_SCSI_INQUIRY': '1',
> 'ID_SERIAL': 'SanDisk__Cruzer_Fit_03021431122121135113-0:0',
> 'ID_SERIAL_SHORT': '03021431122121135113',
> 'ID_TYPE': 'disk',
> 'ID_USB_DRIVER': 'usb-storage',
> 'ID_USB_INSTANCE': '0:0',
> 'ID_USB_INTERFACES': ':080650:',
> 'ID_USB_INTERFACE_NUM': '00',
> 'ID_USB_MODEL': 'Cruzer_Fit',
> 'ID_USB_MODEL_ENC': 'Cruzer\\x20Fit\\x20\\x20\\x20\\x20\\x20\\x20',
> 'ID_USB_MODEL_ID': '5571',
> 'ID_USB_REVISION': '1.00',
> 'ID_USB_SERIAL': 'SanDisk__Cruzer_Fit_03021431122121135113-0:0',
> 'ID_USB_SERIAL_SHORT': '03021431122121135113',
> 'ID_USB_TYPE': 'disk',
> 'ID_USB_VENDOR': 'SanDisk_',
> 'ID_USB_VENDOR_ENC': 'SanDisk\\x27',
> 'ID_USB_VENDOR_ID': '0781',
> 'ID_VENDOR': 'SanDisk_',
> 'ID_VENDOR_ENC': 'SanDisk\\x27',
> 'ID_VENDOR_ID': '0781',
> 'MAJOR': '8',
> 'MINOR': '16',
> 'MPATH_SBIN_PATH': '/sbin',
> 'NVME_HOST_IFACE': 'none',
> 'SCSI_MODEL': 'Cruzer_Fit',
> 'SCSI_MODEL_ENC': 'Cruzer\\x20Fit\\x20\\x20\\x20\\x20\\x20\\x20',
> 'SCSI_REVISION': '1.00',
> 'SCSI_TPGS': '0',
> 'SCSI_TYPE': 'disk',
> 'SCSI_VENDOR': "SanDisk'",
> 'SCSI_VENDOR_ENC': "SanDisk'",
> 'SUBSYSTEM': 'block',
> 'SYS_NAME': 'sdb',
> 'SYS_PATH': '/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/host0/target0:0:0/0:0:0:0/block/sdb',
> 'TAGS': ':systemd:',
> 'USEC_INITIALIZED': '38993469'} ;
>INFO:blivet:scanning sdb (/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/host0/target0:0:0/0:0:0:0/block/sdb)...
>DEBUG:testdata:sysfs attr /sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/host0/target0:0:0/0:0:0:0/block/sdb/hidden: 300a
>INFO:program:Running [6] lvm lvs --noheadings --nosuffix --nameprefixes --unquoted --units=b -a -o vg_name,lv_name,lv_uuid,lv_size,lv_attr,segtype,origin,pool_lv,data_lv,metadata_lv,role,move_pv,data_percent,metadata_percent,copy_percent --config= log {level=7 file=/tmp/lvm.log syslog=0} ...
>INFO:program:stdout[6]: 
>INFO:program:stderr[6]: 
>INFO:program:...done [6] (exit code: 0)
>DEBUG:blivet:                    DeviceTree.get_device_by_name: name: sdb ; incomplete: False ; hidden: False ;
>DEBUG:blivet:                    DeviceTree.get_device_by_name returned None
>WARNING:py.warnings:/usr/lib/python3.9/site-packages/blivet/udev.py:1034: DeprecationWarning: Will be removed in 1.0. Access properties with Device.properties.
>  while device:
>
>DEBUG:blivet:                   DiskDevicePopulator.run: name: sdb ;
>DEBUG:testdata:sysfs attr /sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/host0/target0:0:0/0:0:0:0/block/sdb/device/vendor: 53616e4469736b270a
>DEBUG:testdata:sysfs attr /sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/host0/target0:0:0/0:0:0:0/block/sdb/device/model: 4372757a6572204669742020202020200a
>INFO:blivet:sdb is a disk
>DEBUG:blivet:get_format('None') returning DeviceFormat instance with object id 5
>DEBUG:blivet:get_format('None') returning DeviceFormat instance with object id 6
>DEBUG:blivet:                           DiskDevice._set_format: sdb ; type: None ; current: None ;
>DEBUG:blivet:                         DiskDevice.update_sysfs_path: sdb ; status: True ;
>DEBUG:blivet:sdb sysfs_path set to /sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/host0/target0:0:0/0:0:0:0/block/sdb
>DEBUG:blivet:                             DiskDevice.read_current_size: exists: True ; path: /dev/sdb ; sysfs_path: /sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/host0/target0:0:0/0:0:0:0/block/sdb ;
>DEBUG:testdata:sysfs attr /sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/host0/target0:0:0/0:0:0:0/block/sdb/size: 33303033313837320a
>DEBUG:blivet:updated sdb size to 14.32 GiB (14.32 GiB)
>DEBUG:testdata:sysfs attr /sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/host0/target0:0:0/0:0:0:0/block/sdb/queue/rotational: 310a
>INFO:blivet:added disk sdb (id 4) to device tree
>INFO:blivet:got device: DiskDevice instance (0x7f273d441070) --
>  name = sdb  status = True  id = 4
>  children = []
>  parents = []
>  uuid = None  size = 14.32 GiB
>  format = existing None
>  major = 8  minor = 16  exists = True  protected = False
>  sysfs path = /sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/host0/target0:0:0/0:0:0:0/block/sdb
>  target size = 14.32 GiB  path = /dev/sdb
>  format args = []  original_format = None  removable = True  wwn = None
>DEBUG:testdata:sysfs attr /sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/host0/target0:0:0/0:0:0:0/block/sdb/ro: 300a
>DEBUG:blivet:                    DeviceTree.handle_format: name: sdb ;
>DEBUG:blivet:                                AppleBootstrapFS.supported: supported: True ;
>DEBUG:blivet:get_format('appleboot') returning AppleBootstrapFS instance with object id 8
>DEBUG:blivet:                                EFIFS.supported: supported: True ;
>INFO:program:Running... modprobe --dry-run vfat
>DEBUG:program:Return code: 0
>DEBUG:blivet:get_format('efi') returning EFIFS instance with object id 9
>DEBUG:blivet:                                  MacEFIFS.supported: supported: True ;
>DEBUG:blivet:get_format('macefi') returning MacEFIFS instance with object id 10
>DEBUG:blivet:                                   MacEFIFS.supported: supported: True ;
>DEBUG:blivet:get_format('macefi') returning MacEFIFS instance with object id 11
>WARNING:blivet:Stratis DBus service is not running
>INFO:blivet:type detected on 'sdb' is 'iso9660'
>DEBUG:blivet:                          Iso9660FS.supported: supported: True ;
>DEBUG:blivet:get_format('iso9660') returning Iso9660FS instance with object id 12
>DEBUG:blivet:                         DiskDevice._set_format: sdb ; type: iso9660 ; current: None ;
>INFO:blivet:got format: existing iso9660 filesystem
>DEBUG:blivet:                  DeviceTree.handle_device: name: sdb1 ; info: {'CURRENT_TAGS': ':systemd:',
> 'DEVLINKS': '/dev/disk/by-label/RHEL-9-2-0-BaseOS-x86_64 '
>             '/dev/disk/by-partuuid/d3d1f9a5-01 '
>             '/dev/disk/by-uuid/2023-04-13-16-58-02-00 '
>             '/dev/disk/by-id/usb-SanDisk__Cruzer_Fit_03021431122121135113-0:0-part1 '
>             '/dev/disk/by-path/pci-0000:00:14.0-usb-0:14:1.0-scsi-0:0:0:0-part1',
> 'DEVNAME': '/dev/sdb1',
> 'DEVPATH': '/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/host0/target0:0:0/0:0:0:0/block/sdb/sdb1',
> 'DEVTYPE': 'partition',
> 'DISKSEQ': '4',
> 'DM_MULTIPATH_DEVICE_PATH': '0',
> 'ID_BUS': 'usb',
> 'ID_DRIVE_THUMB': '1',
> 'ID_FS_BLOCKSIZE': '2048',
> 'ID_FS_BOOT_SYSTEM_ID': 'EL\\x20TORITO\\x20SPECIFICATION',
> 'ID_FS_DATA_PREPARER_ID': 'XORRISO-1.4.8\\x202017.09.12.143001\\x2c\\x20LIBISOBURN-1.4.8\\x2c\\x20LIBISOFS-1.4.8\\x2c\\x20LIBBURN-1.4.8',
> 'ID_FS_LABEL': 'RHEL-9-2-0-BaseOS-x86_64',
> 'ID_FS_LABEL_ENC': 'RHEL-9-2-0-BaseOS-x86_64',
> 'ID_FS_TYPE': 'iso9660',
> 'ID_FS_USAGE': 'filesystem',
> 'ID_FS_UUID': '2023-04-13-16-58-02-00',
> 'ID_FS_UUID_ENC': '2023-04-13-16-58-02-00',
> 'ID_FS_VERSION': 'Joliet Extension',
> 'ID_INSTANCE': '0:0',
> 'ID_MODEL': 'Cruzer_Fit',
> 'ID_MODEL_ENC': 'Cruzer\\x20Fit\\x20\\x20\\x20\\x20\\x20\\x20',
> 'ID_MODEL_ID': '5571',
> 'ID_PART_ENTRY_DISK': '8:16',
> 'ID_PART_ENTRY_FLAGS': '0x80',
> 'ID_PART_ENTRY_NUMBER': '1',
> 'ID_PART_ENTRY_OFFSET': '0',
> 'ID_PART_ENTRY_SCHEME': 'dos',
> 'ID_PART_ENTRY_SIZE': '18741432',
> 'ID_PART_ENTRY_TYPE': '0x0',
> 'ID_PART_ENTRY_UUID': 'd3d1f9a5-01',
> 'ID_PART_TABLE_TYPE': 'dos',
> 'ID_PART_TABLE_UUID': 'd3d1f9a5',
> 'ID_PATH': 'pci-0000:00:14.0-usb-0:14:1.0-scsi-0:0:0:0',
> 'ID_PATH_TAG': 'pci-0000_00_14_0-usb-0_14_1_0-scsi-0_0_0_0',
> 'ID_REVISION': '1.00',
> 'ID_SCSI': '1',
> 'ID_SCSI_INQUIRY': '1',
> 'ID_SERIAL': 'SanDisk__Cruzer_Fit_03021431122121135113-0:0',
> 'ID_SERIAL_SHORT': '03021431122121135113',
> 'ID_TYPE': 'disk',
> 'ID_USB_DRIVER': 'usb-storage',
> 'ID_USB_INSTANCE': '0:0',
> 'ID_USB_INTERFACES': ':080650:',
> 'ID_USB_INTERFACE_NUM': '00',
> 'ID_USB_MODEL': 'Cruzer_Fit',
> 'ID_USB_MODEL_ENC': 'Cruzer\\x20Fit\\x20\\x20\\x20\\x20\\x20\\x20',
> 'ID_USB_MODEL_ID': '5571',
> 'ID_USB_REVISION': '1.00',
> 'ID_USB_SERIAL': 'SanDisk__Cruzer_Fit_03021431122121135113-0:0',
> 'ID_USB_SERIAL_SHORT': '03021431122121135113',
> 'ID_USB_TYPE': 'disk',
> 'ID_USB_VENDOR': 'SanDisk_',
> 'ID_USB_VENDOR_ENC': 'SanDisk\\x27',
> 'ID_USB_VENDOR_ID': '0781',
> 'ID_VENDOR': 'SanDisk_',
> 'ID_VENDOR_ENC': 'SanDisk\\x27',
> 'ID_VENDOR_ID': '0781',
> 'MAJOR': '8',
> 'MINOR': '17',
> 'NVME_HOST_IFACE': 'none',
> 'PARTN': '1',
> 'SCSI_MODEL': 'Cruzer_Fit',
> 'SCSI_MODEL_ENC': 'Cruzer\\x20Fit\\x20\\x20\\x20\\x20\\x20\\x20',
> 'SCSI_REVISION': '1.00',
> 'SCSI_TPGS': '0',
> 'SCSI_TYPE': 'disk',
> 'SCSI_VENDOR': "SanDisk'",
> 'SCSI_VENDOR_ENC': "SanDisk'",
> 'SUBSYSTEM': 'block',
> 'SYS_NAME': 'sdb1',
> 'SYS_PATH': '/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/host0/target0:0:0/0:0:0:0/block/sdb/sdb1',
> 'TAGS': ':systemd:',
> 'UDISKS_IGNORE': '0',
> 'USEC_INITIALIZED': '39172013'} ;
>INFO:blivet:scanning sdb1 (/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/host0/target0:0:0/0:0:0:0/block/sdb/sdb1)...
>WARNING:blivet:hidden is not a valid attribute
>DEBUG:blivet:                    DeviceTree.get_device_by_name: name: sdb1 ; incomplete: False ; hidden: False ;
>DEBUG:blivet:                    DeviceTree.get_device_by_name returned None
>DEBUG:blivet:                   PartitionDevicePopulator.run: name: sdb1 ;
>DEBUG:blivet:                     DeviceTree.get_device_by_name: name: sdb1 ; incomplete: False ; hidden: False ;
>DEBUG:blivet:                     DeviceTree.get_device_by_name returned None
>INFO:program:Running... udevadm settle --timeout=300
>DEBUG:program:Return code: 0
>DEBUG:testdata:sysfs attr /sys/class/block/sdb/device/model: 4372757a6572204669742020202020200a
>DEBUG:testdata:sysfs attr /sys/class/block/sda/device/model: 53442f4d4d43204352572020202020200a
>DEBUG:testdata:sysfs attr /sys/class/block/nvme0n1/device/model: 5043363031204e564d6520534b2068796e69782031544220202020202020202020202020202020200a
>DEBUG:testdata:sysfs attr /sys/class/block/nvme1n1/device/model: 53616d73756e6720535344203938302050524f2035303047422020202020202020202020202020200a
>DEBUG:blivet:                     DeviceTree.get_device_by_name: name: sdb ; incomplete: False ; hidden: False ;
>DEBUG:blivet:                     DeviceTree.get_device_by_name returned existing 14.32 GiB disk sdb (4) with existing iso9660 filesystem
>DEBUG:blivet:ignoring partition sdb1 on iso9660
>DEBUG:blivet:no device obtained for sdb1
>DEBUG:blivet:                  DeviceTree.handle_device: name: sdb2 ; info: {'CURRENT_TAGS': ':systemd:',
> 'DEVLINKS': '/dev/disk/by-label/ANACONDA /dev/disk/by-uuid/4889-B939 '
>             '/dev/disk/by-id/usb-SanDisk__Cruzer_Fit_03021431122121135113-0:0-part2 '
>             '/dev/disk/by-partuuid/d3d1f9a5-02 '
>             '/dev/disk/by-path/pci-0000:00:14.0-usb-0:14:1.0-scsi-0:0:0:0-part2',
> 'DEVNAME': '/dev/sdb2',
> 'DEVPATH': '/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/host0/target0:0:0/0:0:0:0/block/sdb/sdb2',
> 'DEVTYPE': 'partition',
> 'DISKSEQ': '4',
> 'DM_MULTIPATH_DEVICE_PATH': '0',
> 'ID_BUS': 'usb',
> 'ID_DRIVE_THUMB': '1',
> 'ID_FS_BLOCKSIZE': '2048',
> 'ID_FS_LABEL': 'ANACONDA',
> 'ID_FS_LABEL_ENC': 'ANACONDA',
> 'ID_FS_TYPE': 'vfat',
> 'ID_FS_USAGE': 'filesystem',
> 'ID_FS_UUID': '4889-B939',
> 'ID_FS_UUID_ENC': '4889-B939',
> 'ID_FS_VERSION': 'FAT12',
> 'ID_INSTANCE': '0:0',
> 'ID_MODEL': 'Cruzer_Fit',
> 'ID_MODEL_ENC': 'Cruzer\\x20Fit\\x20\\x20\\x20\\x20\\x20\\x20',
> 'ID_MODEL_ID': '5571',
> 'ID_PART_ENTRY_DISK': '8:16',
> 'ID_PART_ENTRY_NUMBER': '2',
> 'ID_PART_ENTRY_OFFSET': '4188',
> 'ID_PART_ENTRY_SCHEME': 'dos',
> 'ID_PART_ENTRY_SIZE': '14188',
> 'ID_PART_ENTRY_TYPE': '0xef',
> 'ID_PART_ENTRY_UUID': 'd3d1f9a5-02',
> 'ID_PART_TABLE_TYPE': 'dos',
> 'ID_PART_TABLE_UUID': 'd3d1f9a5',
> 'ID_PATH': 'pci-0000:00:14.0-usb-0:14:1.0-scsi-0:0:0:0',
> 'ID_PATH_TAG': 'pci-0000_00_14_0-usb-0_14_1_0-scsi-0_0_0_0',
> 'ID_REVISION': '1.00',
> 'ID_SCSI': '1',
> 'ID_SCSI_INQUIRY': '1',
> 'ID_SERIAL': 'SanDisk__Cruzer_Fit_03021431122121135113-0:0',
> 'ID_SERIAL_SHORT': '03021431122121135113',
> 'ID_TYPE': 'disk',
> 'ID_USB_DRIVER': 'usb-storage',
> 'ID_USB_INSTANCE': '0:0',
> 'ID_USB_INTERFACES': ':080650:',
> 'ID_USB_INTERFACE_NUM': '00',
> 'ID_USB_MODEL': 'Cruzer_Fit',
> 'ID_USB_MODEL_ENC': 'Cruzer\\x20Fit\\x20\\x20\\x20\\x20\\x20\\x20',
> 'ID_USB_MODEL_ID': '5571',
> 'ID_USB_REVISION': '1.00',
> 'ID_USB_SERIAL': 'SanDisk__Cruzer_Fit_03021431122121135113-0:0',
> 'ID_USB_SERIAL_SHORT': '03021431122121135113',
> 'ID_USB_TYPE': 'disk',
> 'ID_USB_VENDOR': 'SanDisk_',
> 'ID_USB_VENDOR_ENC': 'SanDisk\\x27',
> 'ID_USB_VENDOR_ID': '0781',
> 'ID_VENDOR': 'SanDisk_',
> 'ID_VENDOR_ENC': 'SanDisk\\x27',
> 'ID_VENDOR_ID': '0781',
> 'MAJOR': '8',
> 'MINOR': '18',
> 'NVME_HOST_IFACE': 'none',
> 'PARTN': '2',
> 'SCSI_MODEL': 'Cruzer_Fit',
> 'SCSI_MODEL_ENC': 'Cruzer\\x20Fit\\x20\\x20\\x20\\x20\\x20\\x20',
> 'SCSI_REVISION': '1.00',
> 'SCSI_TPGS': '0',
> 'SCSI_TYPE': 'disk',
> 'SCSI_VENDOR': "SanDisk'",
> 'SCSI_VENDOR_ENC': "SanDisk'",
> 'SUBSYSTEM': 'block',
> 'SYS_NAME': 'sdb2',
> 'SYS_PATH': '/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/host0/target0:0:0/0:0:0:0/block/sdb/sdb2',
> 'TAGS': ':systemd:',
> 'UDISKS_IGNORE': '1',
> 'USEC_INITIALIZED': '39062406'} ;
>INFO:blivet:scanning sdb2 (/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/host0/target0:0:0/0:0:0:0/block/sdb/sdb2)...
>WARNING:blivet:hidden is not a valid attribute
>DEBUG:blivet:                    DeviceTree.get_device_by_name: name: sdb2 ; incomplete: False ; hidden: False ;
>DEBUG:blivet:                    DeviceTree.get_device_by_name returned None
>DEBUG:blivet:                   PartitionDevicePopulator.run: name: sdb2 ;
>DEBUG:blivet:                     DeviceTree.get_device_by_name: name: sdb2 ; incomplete: False ; hidden: False ;
>DEBUG:blivet:                     DeviceTree.get_device_by_name returned None
>INFO:program:Running... udevadm settle --timeout=300
>DEBUG:program:Return code: 0
>DEBUG:testdata:sysfs attr /sys/class/block/sdb/device/model: 4372757a6572204669742020202020200a
>DEBUG:testdata:sysfs attr /sys/class/block/sda/device/model: 53442f4d4d43204352572020202020200a
>DEBUG:testdata:sysfs attr /sys/class/block/nvme0n1/device/model: 5043363031204e564d6520534b2068796e69782031544220202020202020202020202020202020200a
>DEBUG:testdata:sysfs attr /sys/class/block/nvme1n1/device/model: 53616d73756e6720535344203938302050524f2035303047422020202020202020202020202020200a
>DEBUG:blivet:                     DeviceTree.get_device_by_name: name: sdb ; incomplete: False ; hidden: False ;
>DEBUG:blivet:                     DeviceTree.get_device_by_name returned existing 14.32 GiB disk sdb (4) with existing iso9660 filesystem
>DEBUG:blivet:ignoring partition sdb2 on iso9660
>DEBUG:blivet:no device obtained for sdb2
>DEBUG:blivet:                  DeviceTree.handle_device: name: sda ; info: {'CURRENT_TAGS': ':systemd:',
> 'DEVLINKS': '/dev/disk/by-path/pci-0000:00:14.0-usb-0:9:1.0-scsi-0:0:0:0 '
>             '/dev/disk/by-id/usb-Generic-_SD_MMC_CRW_28203008282014000-0:0 '
>             '/dev/disk/by-diskseq/5',
> 'DEVNAME': '/dev/sda',
> 'DEVPATH': '/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/host1/target1:0:0/1:0:0:0/block/sda',
> 'DEVTYPE': 'disk',
> 'DISKSEQ': '5',
> 'DM_MULTIPATH_DEVICE_PATH': '0',
> 'ID_BUS': 'usb',
> 'ID_INSTANCE': '0:0',
> 'ID_MODEL': 'SD_MMC_CRW',
> 'ID_MODEL_ENC': 'SD\\x2fMMC\\x20CRW\\x20\\x20\\x20\\x20\\x20\\x20',
> 'ID_MODEL_ID': '0328',
> 'ID_PATH': 'pci-0000:00:14.0-usb-0:9:1.0-scsi-0:0:0:0',
> 'ID_PATH_TAG': 'pci-0000_00_14_0-usb-0_9_1_0-scsi-0_0_0_0',
> 'ID_REVISION': '1.00',
> 'ID_SCSI': '1',
> 'ID_SCSI_INQUIRY': '1',
> 'ID_SERIAL': 'Generic-_SD_MMC_CRW_28203008282014000-0:0',
> 'ID_SERIAL_SHORT': '28203008282014000',
> 'ID_TYPE': 'disk',
> 'ID_USB_DRIVER': 'usb-storage',
> 'ID_USB_INSTANCE': '0:0',
> 'ID_USB_INTERFACES': ':080650:',
> 'ID_USB_INTERFACE_NUM': '00',
> 'ID_USB_MODEL': 'SD_MMC_CRW',
> 'ID_USB_MODEL_ENC': 'SD\\x2fMMC\\x20CRW\\x20\\x20\\x20\\x20\\x20\\x20',
> 'ID_USB_MODEL_ID': '0328',
> 'ID_USB_REVISION': '1.00',
> 'ID_USB_SERIAL': 'Generic-_SD_MMC_CRW_28203008282014000-0:0',
> 'ID_USB_SERIAL_SHORT': '28203008282014000',
> 'ID_USB_TYPE': 'disk',
> 'ID_USB_VENDOR': 'Generic-',
> 'ID_USB_VENDOR_ENC': 'Generic-',
> 'ID_USB_VENDOR_ID': '0bda',
> 'ID_VENDOR': 'Generic-',
> 'ID_VENDOR_ENC': 'Generic-',
> 'ID_VENDOR_ID': '0bda',
> 'MAJOR': '8',
> 'MINOR': '0',
> 'MPATH_SBIN_PATH': '/sbin',
> 'NVME_HOST_IFACE': 'none',
> 'SCSI_MODEL': 'SD/MMC_CRW',
> 'SCSI_MODEL_ENC': 'SD/MMC\\x20CRW\\x20\\x20\\x20\\x20\\x20\\x20',
> 'SCSI_REVISION': '1.00',
> 'SCSI_TPGS': '0',
> 'SCSI_TYPE': 'disk',
> 'SCSI_VENDOR': 'Generic-',
> 'SCSI_VENDOR_ENC': 'Generic-',
> 'SUBSYSTEM': 'block',
> 'SYS_NAME': 'sda',
> 'SYS_PATH': '/sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/host1/target1:0:0/1:0:0:0/block/sda',
> 'TAGS': ':systemd:',
> 'USEC_INITIALIZED': '38994273'} ;
>INFO:blivet:scanning sda (/sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/host1/target1:0:0/1:0:0:0/block/sda)...
>DEBUG:testdata:sysfs attr /sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/host1/target1:0:0/1:0:0:0/block/sda/hidden: 300a
>DEBUG:blivet:                    DeviceTree.get_device_by_name: name: sda ; incomplete: False ; hidden: False ;
>DEBUG:blivet:                    DeviceTree.get_device_by_name returned None
>WARNING:py.warnings:/usr/lib/python3.9/site-packages/blivet/udev.py:1034: DeprecationWarning: Will be removed in 1.0. Access properties with Device.properties.
>  while device:
>
>DEBUG:blivet:                   DiskDevicePopulator.run: name: sda ;
>DEBUG:testdata:sysfs attr /sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/host1/target1:0:0/1:0:0:0/block/sda/device/vendor: 47656e657269632d0a
>DEBUG:testdata:sysfs attr /sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/host1/target1:0:0/1:0:0:0/block/sda/device/model: 53442f4d4d43204352572020202020200a
>INFO:blivet:sda is a disk
>DEBUG:blivet:get_format('None') returning DeviceFormat instance with object id 15
>DEBUG:blivet:get_format('None') returning DeviceFormat instance with object id 16
>DEBUG:blivet:                           DiskDevice._set_format: sda ; type: None ; current: None ;
>DEBUG:blivet:                         DiskDevice.update_sysfs_path: sda ; status: True ;
>DEBUG:blivet:sda sysfs_path set to /sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/host1/target1:0:0/1:0:0:0/block/sda
>DEBUG:blivet:                             DiskDevice.read_current_size: exists: True ; path: /dev/sda ; sysfs_path: /sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/host1/target1:0:0/1:0:0:0/block/sda ;
>DEBUG:testdata:sysfs attr /sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/host1/target1:0:0/1:0:0:0/block/sda/size: 300a
>DEBUG:blivet:updated sda size to 0 B (0 B)
>DEBUG:testdata:sysfs attr /sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/host1/target1:0:0/1:0:0:0/block/sda/queue/rotational: 310a
>INFO:blivet:added disk sda (id 14) to device tree
>INFO:blivet:got device: DiskDevice instance (0x7f273d4410d0) --
>  name = sda  status = True  id = 14
>  children = []
>  parents = []
>  uuid = None  size = 0 B
>  format = existing None
>  major = 8  minor = 0  exists = True  protected = False
>  sysfs path = /sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/host1/target1:0:0/1:0:0:0/block/sda
>  target size = 0 B  path = /dev/sda
>  format args = []  original_format = None  removable = True  wwn = None
>DEBUG:testdata:sysfs attr /sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/host1/target1:0:0/1:0:0:0/block/sda/ro: 300a
>DEBUG:blivet:                    DeviceTree.handle_format: name: sda ;
>DEBUG:blivet:                          DiskDevice.read_current_size: exists: True ; path: /dev/sda ; sysfs_path: /sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/host1/target1:0:0/1:0:0:0/block/sda ;
>DEBUG:testdata:sysfs attr /sys/devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/host1/target1:0:0/1:0:0:0/block/sda/size: 300a
>DEBUG:blivet:no media present for device sda
>DEBUG:blivet:                  DeviceTree.handle_device: name: nvme0n1 ; info: {'CURRENT_TAGS': ':systemd:',
> 'DEVLINKS': '/dev/disk/by-id/nvme-eui.ace42e009a1d70082ee4ac0000000001 '
>             '/dev/disk/by-id/nvme-PC601_NVMe_SK_hynix_1TB_CS9AN5830103YAH2Q '
>             '/dev/disk/by-path/pci-0000:90:05.5-pci-10000:01:00.0-nvme-1 '
>             '/dev/disk/by-diskseq/2',
> 'DEVNAME': '/dev/nvme0n1',
> 'DEVPATH': '/devices/pci0000:90/0000:90:05.5/pci10000:00/10000:00:02.0/10000:01:00.0/nvme/nvme0/nvme0n1',
> 'DEVTYPE': 'disk',
> 'DISKSEQ': '2',
> 'DM_MULTIPATH_DEVICE_PATH': '0',
> 'FIND_MULTIPATHS_WAIT_UNTIL': '0',
> 'ID_MODEL': 'PC601 NVMe SK hynix 1TB',
> 'ID_PART_TABLE_TYPE': 'gpt',
> 'ID_PART_TABLE_UUID': 'e864c730-9f47-4739-bac5-0d227c2ff557',
> 'ID_PATH': 'pci-0000:90:05.5-pci-10000:01:00.0-nvme-1',
> 'ID_PATH_TAG': 'pci-0000_90_05_5-pci-10000_01_00_0-nvme-1',
> 'ID_REVISION': '80002111',
> 'ID_SERIAL': 'PC601_NVMe_SK_hynix_1TB_CS9AN5830103YAH2Q',
> 'ID_SERIAL_SHORT': 'CS9AN5830103YAH2Q',
> 'ID_WWN': 'eui.ace42e009a1d70082ee4ac0000000001',
> 'MAJOR': '259',
> 'MINOR': '7',
> 'MPATH_SBIN_PATH': '/sbin',
> 'NVME_HOST_IFACE': 'none',
> 'SUBSYSTEM': 'block',
> 'SYS_NAME': 'nvme0n1',
> 'SYS_PATH': '/sys/devices/pci0000:90/0000:90:05.5/pci10000:00/10000:00:02.0/10000:01:00.0/nvme/nvme0/nvme0n1',
> 'TAGS': ':systemd:',
> 'USEC_INITIALIZED': '38995462'} ;
>INFO:blivet:scanning nvme0n1 (/sys/devices/pci0000:90/0000:90:05.5/pci10000:00/10000:00:02.0/10000:01:00.0/nvme/nvme0/nvme0n1)...
>DEBUG:testdata:sysfs attr /sys/devices/pci0000:90/0000:90:05.5/pci10000:00/10000:00:02.0/10000:01:00.0/nvme/nvme0/nvme0n1/hidden: 300a
>DEBUG:blivet:                    DeviceTree.get_device_by_name: name: nvme0n1 ; incomplete: False ; hidden: False ;
>DEBUG:blivet:                    DeviceTree.get_device_by_name returned None
>DEBUG:testdata:sysfs attr /sys/devices/pci0000:90/0000:90:05.5/pci10000:00/10000:00:02.0/10000:01:00.0/nvme/nvme0/transport: 706369650a
>DEBUG:blivet:                   NVMeNamespaceDevicePopulator.run: name: nvme0n1 ;
>WARNING:blivet:device/vendor is not a valid attribute
>DEBUG:testdata:sysfs attr /sys/devices/pci0000:90/0000:90:05.5/pci10000:00/10000:00:02.0/10000:01:00.0/nvme/nvme0/nvme0n1/device/model: 5043363031204e564d6520534b2068796e69782031544220202020202020202020202020202020200a
>INFO:blivet:nvme0n1 is an NVMe local namespace device
>DEBUG:anaconda.modules.common:The configuration is loaded from: ['/run/anaconda/anaconda.conf']
>DEBUG:blivet:registered device format class DeviceFormat as None
>DEBUG:blivet:registered device format class BIOSBoot as biosboot
>DEBUG:blivet:registered device format class DiskLabel as disklabel
>DEBUG:blivet:registered device format class DMRaidMember as dmraidmember
>INFO:program:Running [1] mkdosfs --help ...
>INFO:program:stdout[1]: mkfs.fat 4.2 (2021-01-31)
>
>INFO:program:stderr[1]: Usage: mkdosfs [OPTIONS] TARGET [BLOCKS]
>Create FAT filesystem in TARGET, which can be a block device or file. Use only
>up to BLOCKS 1024 byte blocks if specified. With the -C option, file TARGET will be
>created with a size of 1024 bytes times BLOCKS, which must be specified.
>
>Options:
>  -a              Disable alignment of data structures
>  -A              Toggle Atari variant of the filesystem
>  -b SECTOR       Select SECTOR as location of the FAT32 backup boot sector
>  -c              Check device for bad blocks before creating the filesystem
>  -C              Create file TARGET then create filesystem in it
>  -D NUMBER       Write BIOS drive number NUMBER to boot sector
>  -f COUNT        Create COUNT file allocation tables
>  -F SIZE         Select FAT size SIZE (12, 16 or 32)
>  -g GEOM         Select disk geometry: heads/sectors_per_track
>  -h NUMBER       Write hidden sectors NUMBER to boot sector
>  -i VOLID        Set volume ID to VOLID (a 32 bit hexadecimal number)
>  -I              Ignore and disable safety checks
>  -l FILENAME     Read bad blocks list from FILENAME
>  -m FILENAME     Replace default error message in boot block with contents of FILENAME
>  -M TYPE         Set media type in boot sector to TYPE
>  --mbr[=y|n|a]   Fill (fake) MBR table with one partition which spans whole disk
>  -n LABEL        Set volume name to LABEL (up to 11 characters long)
>  --codepage=N    use DOS codepage N to encode label (default: 850)
>  -r COUNT        Make room for at least COUNT entries in the root directory
>  -R COUNT        Set minimal number of reserved sectors to COUNT
>  -s COUNT        Set number of sectors per cluster to COUNT
>  -S SIZE         Select a sector size of SIZE (a power of two, at least 512)
>  -v              Verbose execution
>  --variant=TYPE  Select variant TYPE of filesystem (standard or Atari)
>
>  --invariant     Use constants for randomly generated or time based values
>  --offset=SECTOR Write the filesystem at a specific sector into the device file.
>  --help          Show this help message and exit
>
>INFO:program:...done [1] (exit code: 0)
>DEBUG:blivet:registered device format class Ext2FS as ext2
>DEBUG:blivet:registered device format class Ext3FS as ext3
>DEBUG:blivet:registered device format class Ext4FS as ext4
>DEBUG:blivet:registered device format class FATFS as vfat
>DEBUG:blivet:registered device format class EFIFS as efi
>DEBUG:blivet:registered device format class BTRFS as btrfs
>DEBUG:blivet:registered device format class GFS2 as gfs2
>DEBUG:blivet:registered device format class JFS as jfs
>DEBUG:blivet:registered device format class ReiserFS as reiserfs
>DEBUG:blivet:registered device format class XFS as xfs
>DEBUG:blivet:registered device format class StratisXFS as stratis xfs
>DEBUG:blivet:registered device format class HFS as hfs
>DEBUG:blivet:registered device format class AppleBootstrapFS as appleboot
>DEBUG:blivet:registered device format class HFSPlus as hfs+
>DEBUG:blivet:registered device format class MacEFIFS as macefi
>DEBUG:blivet:registered device format class NTFS as ntfs
>DEBUG:blivet:registered device format class ExFATFS as exfat
>DEBUG:blivet:registered device format class F2FS as f2fs
>DEBUG:blivet:registered device format class NFS as nfs
>DEBUG:blivet:registered device format class NFSv4 as nfs4
>DEBUG:blivet:registered device format class Iso9660FS as iso9660
>DEBUG:blivet:registered device format class NoDevFS as nodev
>DEBUG:blivet:registered device format class DevPtsFS as devpts
>DEBUG:blivet:registered device format class ProcFS as proc
>DEBUG:blivet:registered device format class SysFS as sysfs
>DEBUG:blivet:registered device format class TmpFS as tmpfs
>DEBUG:blivet:registered device format class BindFS as bind
>DEBUG:blivet:registered device format class SELinuxFS as selinuxfs
>DEBUG:blivet:registered device format class USBFS as usbfs
>DEBUG:blivet:registered device format class EFIVarFS as efivarfs
>INFO:program:Running [2] lvm version ...
>INFO:program:stdout[2]:   LVM version:     2.03.17(2) (2022-11-10)
>  Library version: 1.02.187 (2022-11-10)
>  Driver version:  4.47.0
>  Configuration:   ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu --program-prefix= --disable-dependency-tracking --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/var/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-default-dm-run-dir=/run --with-default-run-dir=/run/lvm --with-default-pid-dir=/run --with-default-locking-dir=/run/lock/lvm --with-usrlibdir=/usr/lib64 --enable-fsadm --enable-write_install --with-user= --with-group= --with-device-uid=0 --with-device-gid=6 --with-device-mode=0660 --enable-pkgconfig --enable-cmdlib --enable-dmeventd --enable-blkid_wiping --with-cluster=internal --with-udevdir=/usr/lib/udev/rules.d --enable-udev_sync --with-thin=internal --with-cache=internal --enable-lvmpolld --enable-lvmlockd-dlm --enable-lvmlockd-dlmcontrol --enable-lvmlockd-sanlock --enable-dbus-service --enable-notify-dbus --enable-dmfilemapd --with-writecache=internal --with-vdo=internal --with-vdo-format=/usr/bin/vdoformat --with-integrity=internal --with-default-use-devices-file=1 --disable-silent-rules --enable-app-machineid --enable-editline --disable-readline
>
>INFO:program:stderr[2]: 
>INFO:program:...done [2] (exit code: 0)
>DEBUG:blivet:registered device format class LUKS as luks
>DEBUG:blivet:registered device format class Integrity as integrity
>DEBUG:blivet:registered device format class LVMPhysicalVolume as lvmpv
>DEBUG:blivet:registered device format class MDRaidMember as mdmember
>DEBUG:blivet:registered device format class MultipathMember as multipath_member
>DEBUG:blivet:registered device format class PPCPRePBoot as prepboot
>DEBUG:blivet:registered device format class SwapSpace as swap
>DEBUG:blivet:registered device format class StratisBlockdev as stratis
>INFO:program:Running... udevadm trigger --action=change --subsystem-match=block
>DEBUG:program:Return code: 0
>INFO:program:Running... udevadm settle --timeout=300
>DEBUG:program:Return code: 0
>INFO:blivet:failed to get initiator name from iscsi firmware: Failed to call GetFirmwareInitiatorName method on /org/freedesktop/UDisks2/Manager with None arguments: GDBus.Error:org.freedesktop.UDisks2.Error.ISCSI.NoFirmware: No firmware found
>DEBUG:anaconda.modules.storage.bootloader.bootloader:The default type is set to 'BootloaderType.DEFAULT'.
>DEBUG:anaconda.modules.storage.fcoe.fcoe:Start up the FCoE module.
>INFO:program:Running... modprobe libfc
>DEBUG:program:Return code: 0
>INFO:program:Running... /usr/libexec/fcoe/fcoe_edd.sh -i
>INFO:program:stdout:
>INFO:program:No FCoE boot disk information is found in EDD!
>DEBUG:program:Return code: 1
>INFO:blivet:No FCoE EDD info found: No FCoE boot disk information is found in EDD!
>DEBUG:anaconda.modules.storage.iscsi.iscsi:Start up the iSCSI module.
>INFO:blivet:ISCSID is /sbin/iscsid
>INFO:program:Running... systemctl start iscsi-init.service
>DEBUG:program:Return code: 0
>INFO:blivet:no initiator set
>DEBUG:anaconda.modules.storage.zfcp.zfcp:Start up the zFCP module.
>INFO:program:Running [3] e2fsck -V ...
>INFO:program:stdout[3]: 
>INFO:program:stderr[3]: e2fsck 1.46.5 (30-Dec-2021)
>	Using EXT2FS Library version 1.46.5, 30-Dec-2021
>
>INFO:program:...done [3] (exit code: 0)
>DEBUG:blivet:               Ext4FS.supported: supported: True ;
>DEBUG:blivet:get_format('ext4') returning Ext4FS instance with object id 0
>DEBUG:blivet:            Ext4FS.supported: supported: True ;
>DEBUG:blivet:trying to set new default fstype to 'ext4'
>DEBUG:blivet:                  Ext4FS.supported: supported: True ;
>DEBUG:blivet:get_format('ext4') returning Ext4FS instance with object id 1
>DEBUG:blivet:               Ext4FS.supported: supported: True ;
>INFO:program:Running... lsblk --bytes -a -o NAME,SIZE,OWNER,GROUP,MODE,FSTYPE,LABEL,UUID,PARTUUID,MOUNTPOINT
>INFO:program:stdout:
>INFO:program:NAME                 SIZE OWNER GROUP MODE       FSTYPE      LABEL                    UUID                                 PARTUUID                             MOUNTPOINT
>INFO:program:loop0           778326016 root  disk  brw-rw---- squashfs                                                                                                       
>INFO:program:loop1          3221225472 root  disk  brw-rw---- ext4        Anaconda                 5d0a7ae2-cf27-4de3-b9d2-da729fdadfbd                                      
>INFO:program:|-live-rw      3221225472 root  disk  brw-rw---- ext4        Anaconda                 5d0a7ae2-cf27-4de3-b9d2-da729fdadfbd                                      /
>INFO:program:`-live-base    3221225472 root  disk  brw-rw---- ext4        Anaconda                 5d0a7ae2-cf27-4de3-b9d2-da729fdadfbd                                      
>INFO:program:loop2         34359738368 root  disk  brw-rw----                                                                                                                
>INFO:program:`-live-rw      3221225472 root  disk  brw-rw---- ext4        Anaconda                 5d0a7ae2-cf27-4de3-b9d2-da729fdadfbd                                      /
>INFO:program:sda                     0 root  disk  brw-rw----                                                                                                                
>INFO:program:sdb           15376318464 root  disk  brw-rw---- iso9660     RHEL-9-2-0-BaseOS-x86_64 2023-04-13-16-58-02-00                                                    /run/install/repo
>INFO:program:|-sdb1         9595613184 root  disk  brw-rw---- iso9660     RHEL-9-2-0-BaseOS-x86_64 2023-04-13-16-58-02-00               d3d1f9a5-01                          
>INFO:program:`-sdb2            7264256 root  disk  brw-rw---- vfat        ANACONDA                 4889-B939                            d3d1f9a5-02                          
>INFO:program:zram0          8589934592 root  disk  brw-rw----                                                                                                                [SWAP]
>INFO:program:nvme1n1      500107862016 root  disk  brw-rw----                                                                                                                
>INFO:program:|-nvme1n1p1    1073741824 root  disk  brw-rw---- vfat        EFI                      4DF5-C68C                            66b26b19-018a-4567-bae1-0d0419af15a3 
>INFO:program:|-nvme1n1p2    2147483648 root  disk  brw-rw---- ext4        BOOT                     543c0f25-9ff9-4bbd-879a-846757d6e82d 2ef6489d-f103-4a1c-923b-864a2e22a270 
>INFO:program:|-nvme1n1p3  107376279552 root  disk  brw-rw---- crypto_LUKS                          f33c226d-0ee7-4808-a2a5-dcffb2abd016 9e769044-0608-40d1-944b-fa05ec67ffdf 
>INFO:program:|-nvme1n1p4  107374182400 root  disk  brw-rw---- crypto_LUKS                          1b4573e6-7f42-42e0-a5a6-01cdd6a4034d ef152705-7eaa-4693-a2f0-4b013b8306aa 
>INFO:program:|-nvme1n1p5   34361835520 root  disk  brw-rw---- crypto_LUKS                          9abcfb1d-2f96-4c86-96a9-c1bc4badd7c7 2e6f9e00-2049-4dec-b4d7-32f2c916f1ae 
>INFO:program:`-nvme1n1p6  247773265920 root  disk  brw-rw---- crypto_LUKS                          479ab4fe-5db2-4d76-8c59-919073155559 16ed28f0-bced-4db2-8e05-f094356ca6d3 
>INFO:program:nvme0n1     1024209543168 root  disk  brw-rw----                                                                                                                
>INFO:program:`-nvme0n1p1 1024208142336 root  disk  brw-rw---- crypto_LUKS                          13bd40a8-8d71-4227-afa6-2d6fdbef971c d7e62b2b-967c-472c-a6fc-b71b8adb676b 
>DEBUG:program:Return code: 0
>DEBUG:blivet:lsblk output:
>NAME                 SIZE OWNER GROUP MODE       FSTYPE      LABEL                    UUID                                 PARTUUID                             MOUNTPOINT
>loop0           778326016 root  disk  brw-rw---- squashfs                                                                                                       
>loop1          3221225472 root  disk  brw-rw---- ext4        Anaconda                 5d0a7ae2-cf27-4de3-b9d2-da729fdadfbd                                      
>|-live-rw      3221225472 root  disk  brw-rw---- ext4        Anaconda                 5d0a7ae2-cf27-4de3-b9d2-da729fdadfbd                                      /
>`-live-base    3221225472 root  disk  brw-rw---- ext4        Anaconda                 5d0a7ae2-cf27-4de3-b9d2-da729fdadfbd                                      
>loop2         34359738368 root  disk  brw-rw----                                                                                                                
>`-live-rw      3221225472 root  disk  brw-rw---- ext4        Anaconda                 5d0a7ae2-cf27-4de3-b9d2-da729fdadfbd                                      /
>sda                     0 root  disk  brw-rw----                                                                                                                
>sdb           15376318464 root  disk  brw-rw---- iso9660     RHEL-9-2-0-BaseOS-x86_64 2023-04-13-16-58-02-00                                                    /run/install/repo
>|-sdb1         9595613184 root  disk  brw-rw---- iso9660     RHEL-9-2-0-BaseOS-x86_64 2023-04-13-16-58-02-00               d3d1f9a5-01                          
>`-sdb2            7264256 root  disk  brw-rw---- vfat        ANACONDA                 4889-B939                            d3d1f9a5-02                          
>zram0          8589934592 root  disk  brw-rw----                                                                                                                [SWAP]
>nvme1n1      500107862016 root  disk  brw-rw----                                                                                                                
>|-nvme1n1p1    1073741824 root  disk  brw-rw---- vfat        EFI                      4DF5-C68C                            66b26b19-018a-4567-bae1-0d0419af15a3 
>|-nvme1n1p2    2147483648 root  disk  brw-rw---- ext4        BOOT                     543c0f25-9ff9-4bbd-879a-846757d6e82d 2ef6489d-f103-4a1c-923b-864a2e22a270 
>|-nvme1n1p3  107376279552 root  disk  brw-rw---- crypto_LUKS                          f33c226d-0ee7-4808-a2a5-dcffb2abd016 9e769044-0608-40d1-944b-fa05ec67ffdf 
>|-nvme1n1p4  107374182400 root  disk  brw-rw---- crypto_LUKS                          1b4573e6-7f42-42e0-a5a6-01cdd6a4034d ef152705-7eaa-4693-a2f0-4b013b8306aa 
>|-nvme1n1p5   34361835520 root  disk  brw-rw---- crypto_LUKS                          9abcfb1d-2f96-4c86-96a9-c1bc4badd7c7 2e6f9e00-2049-4dec-b4d7-32f2c916f1ae 
>`-nvme1n1p6  247773265920 root  disk  brw-rw---- crypto_LUKS                          479ab4fe-5db2-4d76-8c59-919073155559 16ed28f0-bced-4db2-8e05-f094356ca6d3 
>nvme0n1     1024209543168 root  disk  brw-rw----                                                                                                                
>`-nvme0n1p1 1024208142336 root  disk  brw-rw---- crypto_LUKS                          13bd40a8-8d71-4227-afa6-2d6fdbef971c d7e62b2b-967c-472c-a6fc-b71b8adb676b 
>
>DEBUG:blivet:lvm filter: clearing the lvm devices list
>DEBUG:blivet:lvm filter: clearing the lvm devices list
>DEBUG:blivet:trying to set new default fstype to 'xfs'
>DEBUG:blivet:                XFS.supported: supported: True ;
>INFO:program:Running... modprobe --dry-run xfs
>DEBUG:program:Return code: 0
>DEBUG:blivet:get_format('xfs') returning XFS instance with object id 2
>DEBUG:blivet:             XFS.supported: supported: True ;
>DEBUG:anaconda.storage:trying to set new default luks version to 'luks2'
>DEBUG:blivet:              LUKS.__init__: luks_version: luks2 ;
>DEBUG:blivet:get_format('luks') returning LUKS instance with object id 3
>DEBUG:anaconda.modules.storage.storage:The storage model has changed.
>DEBUG:anaconda.modules.common.base.base:Publish the service.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/Checker.
>INFO:anaconda.core.dbus:Connecting to the Anaconda bus at unix:abstract=/tmp/dbus-66QjySMHVi,guid=5b809bc8ea6006379a86449964c3d84a.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/DeviceTree.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/DiskInitialization.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/DiskSelection.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/Snapshot.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/Bootloader.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/FCoE.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/iSCSI.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/NVDIMM.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/DASD.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage/zFCP.
>DEBUG:dasbus.connection:Publishing an object at /org/fedoraproject/Anaconda/Modules/Storage.
>DEBUG:dasbus.connection:Registering a service name org.fedoraproject.Anaconda.Modules.Storage.
>DEBUG:anaconda.modules.common.base.base:Start the loop.
>INFO:anaconda.modules.storage.bootloader.factory:Created the boot loader EFIGRUB.

Actions: View

Attachments on bug 2227273: 1980468 | 1980469 | 1980470 | 1980471 | 1980472 | 1980473 | 1980474 | 1980475 | 1980476 | 1980477 | 1980478 | 1980479 | 1980480 | 1980481