Attachment 199791 Details for Bug 295481 – dmesg output from 2.6.18-8.1.8 kernel (boot debug)

dmesg output from 2.6.18-8.1.8 kernel (boot debug)

dmesg.1.8 (text/plain), 26.93 KB, created by Bob Relyea on 2007-09-19 17:12:53 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bob Relyea

Created: 2007-09-19 17:12:53 UTC

Size: 26.93 KB

patch

obsolete

>Linux version 2.6.18-8.1.8.el5 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Mon Jun 25 17:06:19 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
> BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI data)
> BIOS-e820: 000000007f6df000 - 000000007f700000 (ACPI NVS)
> BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
>1142MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f6810
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 521936
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 292560 pages, LIFO batch:31
>DMI present.
>Using APIC driver default
>ACPI: RSDP (v002 LENOVO                                ) @ 0x000f67d0
>ACPI: XSDT (v001 LENOVO TP-7I    0x00001040  LTP 0x00000000) @ 0x7f6d1496
>ACPI: FADT (v003 LENOVO TP-7I    0x00001040 LNVO 0x00000001) @ 0x7f6d1600
>ACPI: SSDT (v001 LENOVO TP-7I    0x00001040 MSFT 0x0100000e) @ 0x7f6d17b4
>ACPI: ECDT (v001 LENOVO TP-7I    0x00001040 LNVO 0x00000001) @ 0x7f6dec51
>ACPI: TCPA (v002 LENOVO TP-7I    0x00001040 LNVO 0x00000001) @ 0x7f6deca3
>ACPI: MADT (v001 LENOVO TP-7I    0x00001040 LNVO 0x00000001) @ 0x7f6decd5
>ACPI: MCFG (v001 LENOVO TP-7I    0x00001040 LNVO 0x00000001) @ 0x7f6ded3d
>ACPI: HPET (v001 LENOVO TP-7I    0x00001040 LNVO 0x00000001) @ 0x7f6ded79
>ACPI: SLIC (v001 LENOVO TP-7I    0x00001040  LTP 0x00000000) @ 0x7f6dee62
>ACPI: BOOT (v001 LENOVO TP-7I    0x00001040  LTP 0x00000001) @ 0x7f6defd8
>ACPI: SSDT (v001 LENOVO TP-7I    0x00001040 INTL 0x20050513) @ 0x7f6f2697
>ACPI: SSDT (v001 LENOVO TP-7I    0x00001040 INTL 0x20050513) @ 0x7f6f28f6
>ACPI: SSDT (v001 LENOVO TP-7I    0x00001040 INTL 0x20050513) @ 0x7f6f299c
>ACPI: SSDT (v001 LENOVO TP-7I    0x00001040 INTL 0x20050513) @ 0x7f6f2e93
>ACPI: DSDT (v001 LENOVO TP-7I    0x00001040 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>Detected 1995.199 MHz processor.
>Built 1 zonelists.  Total pages: 521936
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb debug
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0737000 soft=c0717000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2062972k/2087744k available (2043k kernel code, 23424k reserved, 846k data, 232k init, 1170240k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Using HPET for base-timer
>Calibrating delay using timer specific routine.. 3993.45 BogoMIPS (lpj=1996726)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0738000 soft=c0718000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.00 BogoMIPS (lpj=1995003)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>Total of 2 processors activated (7983.45 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: 
>CPU#0 had -154 usecs TSC skew, fixed it up.
>CPU#1 had 154 usecs TSC skew, fixed it up.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=136 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>migration_cost=94
>checking if image is initramfs... it is
>Freeing initrd memory: 2266k freed
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver 
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>Setting up standard PCI resources
>ACPI: Found ECDT
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:00:02.0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: Embedded Controller [EC] (gpe 28) interrupt mode.
>ACPI: Power Resource [PUBS] (on)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: ee000000-ee0fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: 3000-4fff
>  MEM window: ec000000-edffffff
>  PREFETCH window: e4000000-e40fffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: 5000-6fff
>  MEM window: e8000000-e9ffffff
>  PREFETCH window: e4100000-e41fffff
>PCI: Bridge: 0000:00:1c.3
>  IO window: 7000-8fff
>  MEM window: ea000000-ebffffff
>  PREFETCH window: e4200000-e42fffff
>PCI: Bus 22, cardbus bridge: 0000:15:00.0
>  IO window: 00009000-000090ff
>  IO window: 00009400-000094ff
>  PREFETCH window: e0000000-e1ffffff
>  MEM window: e6000000-e7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 9000-cfff
>  MEM window: e4300000-e7ffffff
>  PREFETCH window: e0000000-e3ffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 201
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x35 set to 0x80
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1190221130.148:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 712D6863B9BAAA71
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>Allocate Port Service[0000:00:1c.2:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>Allocate Port Service[0000:00:1c.3:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (60 C)
>ACPI: Thermal Zone [THM1] (61 C)
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH7: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 201
>ICH7: chipset revision 2
>ICH7: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
>Probing IDE interface ide0...
>hda: HL-DT-ST DVDRAM GSA-4083N, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012]
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 201
>Socket status: 30000007
>pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff
>pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
>pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>Time: tsc clocksource has been installed.
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 232k freed
>Write protecting the kernel read-only data: 383k
>Time: hpet clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 201, io base 0x00001820
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 58
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 58, io base 0x00001840
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /class/input/input1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 66
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 66, io base 0x00001860
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 74
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 74, io base 0x00001880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 74
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 74, io mem 0xee444000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ahci 0000:00:1f.2: version 2.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 201
>usb 5-6: new high speed USB device using ehci_hcd and address 2
>usb 5-6: configuration #1 chosen from 1 choice
>hub 5-6:1.0: USB hub found
>hub 5-6:1.0: 4 ports detected
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>ata1: SATA max UDMA/133 cmd 0xF883E500 ctl 0x0 bmdma 0x0 irq 82
>ata2: SATA max UDMA/133 cmd 0xF883E580 ctl 0x0 bmdma 0x0 irq 82
>ata3: SATA max UDMA/133 cmd 0xF883E600 ctl 0x0 bmdma 0x0 irq 82
>ata4: SATA max UDMA/133 cmd 0xF883E680 ctl 0x0 bmdma 0x0 irq 82
>scsi0 : ahci
>usb 5-6.1: new full speed USB device using ehci_hcd and address 5
>usb 5-6.1: configuration #1 chosen from 1 choice
>hub 5-6.1:1.0: USB hub found
>hub 5-6.1:1.0: 4 ports detected
>usb 5-6.3: new high speed USB device using ehci_hcd and address 6
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7, max UDMA/100, 195371568 sectors: LBA48 
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/100
>scsi1 : ahci
>usb 5-6.3: configuration #1 chosen from 1 choice
>usb 4-1: new full speed USB device using uhci_hcd and address 2
>ata2: SATA link down (SStatus 0 SControl 0)
>scsi2 : ahci
>usb 4-1: configuration #1 chosen from 1 choice
>ata3: SATA link down (SStatus 0 SControl 0)
>scsi3 : ahci
>usb 4-2: new full speed USB device using uhci_hcd and address 3
>usb 4-2: configuration #1 chosen from 1 choice
>ata4: SATA link down (SStatus 0 SControl 0)
>  Vendor: ATA       Model: HTS721010G9SA00   Rev: MCZI
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda:<6>usb 5-6.1.1: new full speed USB device using ehci_hcd and address 7
>usb 5-6.1.1: configuration #1 chosen from 1 choice
>hub 5-6.1.1:1.0: USB hub found
>hub 5-6.1.1:1.0: 3 ports detected
> sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>usb 5-6.1.3: new low speed USB device using ehci_hcd and address 8
>usb 5-6.1.3: configuration #1 chosen from 1 choice
>input: No brand SP02-A1 as /class/input/input2
>input: USB HID v1.10 Keyboard [No brand SP02-A1] on usb-0000:00:1d.7-6.1.3
>drivers/usb/input/hid-core.c: couldn't find an input interrupt endpoint
>usb 5-6.1.1.1: new full speed USB device using ehci_hcd and address 9
>usb 5-6.1.1.1: configuration #1 chosen from 1 choice
>input: Dell Dell USB Keyboard Hub as /class/input/input3
>input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.7-6.1.1.1
>input: Dell Dell USB Keyboard Hub as /class/input/input4
>input: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:1d.7-6.1.1.1
>usb 5-6.1.1.3: new low speed USB device using ehci_hcd and address 10
>usb 5-6.1.1.3: configuration #1 chosen from 1 choice
>input: HID 413c:3010 as /class/input/input5
>input: USB HID v1.00 Mouse [HID 413c:3010] on usb-0000:00:1d.7-6.1.1.3
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1190221138.892:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1587 types, 172 bools, 1 sens, 1024 cats
>security:  59 classes, 49762 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1190221139.227:3): policy loaded auid=4294967295
>input: PC Speaker as /class/input/input6
>intel_rng: FWH not detected
>ieee80211_crypt: no version for "struct_module" found: kernel tainted.
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, 1.2.16
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0d
>ipw3945: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 58
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Intel(R) PRO/1000 Network Driver - version 7.2.7-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:15:58:7e:4f:ea
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 6
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 193
>hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new driver hci_usb
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 58
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>  Vendor: USB-HS    Model: WDC WD2500BB-55G  Rev: 0.01
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 0b 00 00 08
>sdb: assuming drive cache: write through
>SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 0b 00 00 08
>sdb: assuming drive cache: write through
> sdb: sdb1
>sd 4:0:0:0: Attached scsi disk sdb
>sd 4:0:0:0: Attached scsi generic sg1 type 0
>usb-storage: device scan complete
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Sleep Button (CM) [SLPB]
>ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
>ibm_acpi: http://ibm-acpi.sf.net/
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
>ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>audit(1190221175.642:4): audit_pid=2586 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>[drm] Initialized drm 1.0.1 20051102
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 201
>[drm] Initialized i915 1.5.0 20060119 on minor 0
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb1, type ext3), uses xattr
>ieee80211_crypt: registered algorithm 'WEP'
>ipw3945: association process canceled
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 295481: 199771 | 199791 | 199801