Attachment 200701 Details for Bug 249382 – dmesg output

dmesg output

dmesg.out.txt (text/plain), 37.41 KB, created by The Source on 2007-09-20 12:08:36 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: The Source

Created: 2007-09-20 12:08:36 UTC

Size: 37.41 KB

patch

obsolete

>Linux version 2.6.22.5 (thesource@Max) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Thu Sep 13 11:59:16 MSD 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffa0000 (usable)
> BIOS-e820: 000000003ffa0000 - 000000003ffae000 (ACPI data)
> BIOS-e820: 000000003ffae000 - 000000003ffe0000 (ACPI NVS)
> BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>Entering add_active_range(0, 0, 262048) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262048
>early_node_map[1] active PFN ranges
>    0:        0 ->   262048
>On node 0 totalpages: 262048
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 255 pages used for memmap
>  HighMem zone: 32417 pages, LIFO batch:7
>DMI 2.4 present.
>ACPI: RSDP 000FB120, 0024 (r2 ACPIAM)
>ACPI: XSDT 3FFA0100, 004C (r1 A_M_I_ OEMXSDT   1000728 MSFT       97)
>ACPI: FACP 3FFA0290, 00F4 (r3 A_M_I_ OEMFACP   1000728 MSFT       97)
>ACPI: DSDT 3FFA0440, 5AF4 (r1  A0703 A0703000        0 INTL 20051117)
>ACPI: FACS 3FFAE000, 0040
>ACPI: APIC 3FFA0390, 006C (r1 A_M_I_ OEMAPIC   1000728 MSFT       97)
>ACPI: MCFG 3FFA0400, 003C (r1 A_M_I_ OEMMCFG   1000728 MSFT       97)
>ACPI: OEMB 3FFAE040, 0080 (r1 A_M_I_ AMI_OEM   1000728 MSFT       97)
>ACPI: HPET 3FFA5F40, 0038 (r1 A_M_I_ OEMHPET   1000728 MSFT       97)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bff80000)
>Built 1 zonelists.  Total pages: 260001
>Kernel command line: ro root=LABEL=/ rhgb quiet agp=off
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c077e000 soft=c075e000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 3000.301 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1031304k/1048192k available (2050k kernel code, 16164k reserved, 1098k data, 256k init, 130688k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc57000 - 0xfffff000   (3744 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0719000 - 0xc0759000   ( 256 kB)
>      .data : 0xc0600a06 - 0xc0713444   (1098 kB)
>      .text : 0xc0400000 - 0xc0600a06   (2050 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Calibrating delay using timer specific routine.. 6004.13 BogoMIPS (lpj=3002069)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebfbff 20000000 00000000 0000b180 0000649d 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 0a
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c077f000 soft=c075f000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5999.91 BogoMIPS (lpj=2999955)
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebfbff 20000000 00000000 0000b180 0000649d 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 0a
>Total of 2 processors activated (12004.04 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>migration_cost=385
>PM: Adding info for No Bus:platform
>Time:  9:15:27  Date: 08/20/107
>NET: Registered protocol family 16
>PM: Adding info for No Bus:vtcon0
>ACPI: bus type pci registered
>PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support.
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PM: Adding info for acpi:acpi_system:00
>PM: Adding info for acpi:button_power:00
>PM: Adding info for acpi:ACPI0007:00
>PM: Adding info for acpi:ACPI0007:01
>PM: Adding info for acpi:ACPI0007:02
>PM: Adding info for acpi:ACPI0007:03
>PM: Adding info for acpi:device:00
>PM: Adding info for acpi:PNP0A08:00
>PM: Adding info for acpi:PNP0C01:00
>PM: Adding info for acpi:device:01
>PM: Adding info for acpi:device:02
>PM: Adding info for acpi:device:03
>PM: Adding info for acpi:device:04
>PM: Adding info for acpi:device:05
>PM: Adding info for acpi:device:06
>PM: Adding info for acpi:device:07
>PM: Adding info for acpi:device:08
>PM: Adding info for acpi:device:09
>PM: Adding info for acpi:PNP0000:00
>PM: Adding info for acpi:PNP0200:00
>PM: Adding info for acpi:PNP0100:00
>PM: Adding info for acpi:PNP0B00:00
>PM: Adding info for acpi:PNP0800:00
>PM: Adding info for acpi:PNP0C04:00
>PM: Adding info for acpi:PNP0700:00
>PM: Adding info for acpi:PNP0401:00
>PM: Adding info for acpi:PNP0C02:00
>PM: Adding info for acpi:PNP0C02:01
>PM: Adding info for acpi:PNP0103:00
>PM: Adding info for acpi:ATK0110:00
>PM: Adding info for acpi:PNP0303:00
>PM: Adding info for acpi:PNP0C02:02
>PM: Adding info for acpi:PNP0501:00
>PM: Adding info for acpi:INT0800:00
>PM: Adding info for acpi:PNP0C02:03
>PM: Adding info for acpi:PNP0C02:04
>PM: Adding info for acpi:device:0a
>PM: Adding info for acpi:device:0b
>PM: Adding info for acpi:device:0c
>PM: Adding info for acpi:device:0d
>PM: Adding info for acpi:device:0e
>PM: Adding info for acpi:device:0f
>PM: Adding info for acpi:device:10
>PM: Adding info for acpi:device:11
>PM: Adding info for acpi:device:12
>PM: Adding info for acpi:device:13
>PM: Adding info for acpi:device:14
>PM: Adding info for acpi:device:15
>PM: Adding info for acpi:device:16
>PM: Adding info for acpi:device:17
>PM: Adding info for acpi:PNP0C01:01
>PM: Adding info for acpi:PNP0C0C:00
>PM: Adding info for acpi:PNP0C0F:00
>PM: Adding info for acpi:PNP0C0F:01
>PM: Adding info for acpi:PNP0C0F:02
>PM: Adding info for acpi:PNP0C0F:03
>PM: Adding info for acpi:PNP0C0F:04
>PM: Adding info for acpi:PNP0C0F:05
>PM: Adding info for acpi:PNP0C0F:06
>PM: Adding info for acpi:PNP0C0F:07
>PM: Adding info for acpi:thermal:00
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PM: Adding info for No Bus:pci0000:00
>PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>PM: Adding info for pci:0000:00:00.0
>PM: Adding info for pci:0000:00:01.0
>PM: Adding info for pci:0000:00:1b.0
>PM: Adding info for pci:0000:00:1c.0
>PM: Adding info for pci:0000:00:1c.1
>PM: Adding info for pci:0000:00:1d.0
>PM: Adding info for pci:0000:00:1d.1
>PM: Adding info for pci:0000:00:1d.2
>PM: Adding info for pci:0000:00:1d.3
>PM: Adding info for pci:0000:00:1d.7
>PM: Adding info for pci:0000:00:1e.0
>PM: Adding info for pci:0000:00:1f.0
>PM: Adding info for pci:0000:00:1f.1
>PM: Adding info for pci:0000:00:1f.2
>PM: Adding info for pci:0000:00:1f.3
>PM: Adding info for pci:0000:04:00.0
>PM: Adding info for pci:0000:02:00.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>PM: Adding info for No Bus:pnp0
>ACPI: bus type pnp registered
>PM: Adding info for pnp:00:00
>PM: Adding info for pnp:00:01
>PM: Adding info for pnp:00:02
>PM: Adding info for pnp:00:03
>PM: Adding info for pnp:00:04
>PM: Adding info for pnp:00:05
>PM: Adding info for pnp:00:06
>PM: Adding info for pnp:00:07
>PM: Adding info for pnp:00:08
>PM: Adding info for pnp:00:09
>PM: Adding info for pnp:00:0a
>PM: Adding info for pnp:00:0b
>PM: Adding info for pnp:00:0c
>PM: Adding info for pnp:00:0d
>PM: Adding info for pnp:00:0e
>PM: Adding info for pnp:00:0f
>PM: Adding info for pnp:00:10
>PM: Adding info for pnp:00:11
>pnp: PnP ACPI: found 18 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
>pnp: 00:08: ioport range 0x290-0x297 has been reserved
>pnp: 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
>pnp: 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
>pnp: 00:09: iomem range 0xffb00000-0xffbfffff has been reserved
>pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
>pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
>pnp: 00:0f: iomem range 0xffc00000-0xfff7ffff has been reserved
>pnp: 00:10: iomem range 0xf0000000-0xf3ffffff has been reserved
>pnp: 00:11: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:11: iomem range 0xc0000-0xdffff could not be reserved
>pnp: 00:11: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:11: iomem range 0x100000-0x3fffffff could not be reserved
>PM: Adding info for No Bus:mem
>PM: Adding info for No Bus:kmem
>PM: Adding info for No Bus:null
>PM: Adding info for No Bus:port
>PM: Adding info for No Bus:zero
>PM: Adding info for No Bus:full
>PM: Adding info for No Bus:random
>PM: Adding info for No Bus:urandom
>PM: Adding info for No Bus:kmsg
>PM: Adding info for No Bus:oldmem
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: e000-efff
>  MEM window: e2f00000-e7ffffff
>  PREFETCH window: e8000000-efffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: d000-dfff
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: c000-cfff
>  MEM window: e2e00000-e2efffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: b000-bfff
>  MEM window: disabled.
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 2826k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>PM: Adding info for platform:pcspkr
>PM: Adding info for No Bus:snapshot
>audit: initializing netlink socket (disabled)
>audit(1190279727.290:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:04:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PM: Adding info for pci_express:0000:00:01.0:pcie00
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>PM: Adding info for pci_express:0000:00:1c.0:pcie00
>Allocate Port Service[0000:00:1c.0:pcie02]
>PM: Adding info for pci_express:0000:00:1c.0:pcie02
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>PM: Adding info for pci_express:0000:00:1c.1:pcie00
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>PM: Adding info for platform:vesafb.0
>ACPI Warning (tbutils-0158): Incorrect checksum in table [OEMB] -  F7, should be EA [20070126]
>ACPI: SSDT 3FFAE0C0, 01D2 (r1    AMI   CPU1PM        1 INTL 20060113)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: SSDT 3FFAE2A0, 0143 (r1    AMI   CPU2PM        1 INTL 20060113)
>ACPI: Processor [CPU2] (supports 8 throttling states)
>ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
>PM: Adding info for No Bus:pnp1
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>PM: Adding info for No Bus:tty
>PM: Adding info for No Bus:console
>PM: Adding info for No Bus:ptmx
>PM: Adding info for No Bus:tty0
>PM: Adding info for No Bus:vcs
>PM: Adding info for No Bus:vcsa
>PM: Adding info for No Bus:tty1
>PM: Adding info for No Bus:tty2
>PM: Adding info for No Bus:tty3
>PM: Adding info for No Bus:tty4
>PM: Adding info for No Bus:tty5
>PM: Adding info for No Bus:tty6
>PM: Adding info for No Bus:tty7
>PM: Adding info for No Bus:tty8
>PM: Adding info for No Bus:tty9
>PM: Adding info for No Bus:tty10
>PM: Adding info for No Bus:tty11
>PM: Adding info for No Bus:tty12
>PM: Adding info for No Bus:tty13
>PM: Adding info for No Bus:tty14
>PM: Adding info for No Bus:tty15
>PM: Adding info for No Bus:tty16
>PM: Adding info for No Bus:tty17
>PM: Adding info for No Bus:tty18
>PM: Adding info for No Bus:tty19
>PM: Adding info for No Bus:tty20
>PM: Adding info for No Bus:tty21
>PM: Adding info for No Bus:tty22
>PM: Adding info for No Bus:tty23
>PM: Adding info for No Bus:tty24
>PM: Adding info for No Bus:tty25
>PM: Adding info for No Bus:tty26
>PM: Adding info for No Bus:tty27
>PM: Adding info for No Bus:tty28
>PM: Adding info for No Bus:tty29
>PM: Adding info for No Bus:tty30
>PM: Adding info for No Bus:tty31
>PM: Adding info for No Bus:tty32
>PM: Adding info for No Bus:tty33
>PM: Adding info for No Bus:tty34
>PM: Adding info for No Bus:tty35
>PM: Adding info for No Bus:tty36
>PM: Adding info for No Bus:tty37
>PM: Adding info for No Bus:tty38
>PM: Adding info for No Bus:tty39
>PM: Adding info for No Bus:tty40
>PM: Adding info for No Bus:tty41
>PM: Adding info for No Bus:tty42
>PM: Adding info for No Bus:tty43
>PM: Adding info for No Bus:tty44
>PM: Adding info for No Bus:tty45
>PM: Adding info for No Bus:tty46
>PM: Adding info for No Bus:tty47
>PM: Adding info for No Bus:tty48
>PM: Adding info for No Bus:tty49
>PM: Adding info for No Bus:tty50
>PM: Adding info for No Bus:tty51
>PM: Adding info for No Bus:tty52
>PM: Adding info for No Bus:tty53
>PM: Adding info for No Bus:tty54
>PM: Adding info for No Bus:tty55
>PM: Adding info for No Bus:tty56
>PM: Adding info for No Bus:tty57
>PM: Adding info for No Bus:tty58
>PM: Adding info for No Bus:tty59
>PM: Adding info for No Bus:tty60
>PM: Adding info for No Bus:tty61
>PM: Adding info for No Bus:tty62
>PM: Adding info for No Bus:tty63
>PM: Adding info for No Bus:hpet
>hpet_resources: 0xfed00000 is busy
>Generic RTC Driver v1.07
>PM: Adding info for No Bus:rtc
>PM: Adding info for No Bus:nvram
>Non-volatile memory driver v1.2
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>PM: Adding info for platform:serial8250
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PM: Adding info for No Bus:ttyS0
>PM: Adding info for No Bus:ttyS1
>PM: Adding info for No Bus:ttyS2
>PM: Adding info for No Bus:ttyS3
>PM: Removing info for No Bus:ttyS0
>00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PM: Adding info for No Bus:ttyS0
>PM: Adding info for No Bus:isa
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>PM: Adding info for No Bus:lo
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>PM: Adding info for platform:i8042
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>PM: Adding info for serio:serio0
>PM: Adding info for serio:serio1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 7:194:273
>  hash matches device lo
>  hash matches device tty10
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 256k freed
>Write protecting the kernel read-only data: 845k
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 18, io base 0x00008000
>PM: Adding info for usb:usb1
>PM: Adding info for No Bus:usbdev1.1_ep00
>usb usb1: configuration #1 chosen from 1 choice
>PM: Adding info for usb:1-0:1.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev1.1_ep81
>PM: Adding info for No Bus:usbdev1.1
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00008400
>PM: Adding info for usb:usb2
>PM: Adding info for No Bus:usbdev2.1_ep00
>usb usb2: configuration #1 chosen from 1 choice
>PM: Adding info for usb:2-0:1.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev2.1_ep81
>PM: Adding info for No Bus:usbdev2.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 19, io base 0x00008800
>PM: Adding info for usb:usb3
>PM: Adding info for No Bus:usbdev3.1_ep00
>usb usb3: configuration #1 chosen from 1 choice
>PM: Adding info for usb:3-0:1.0
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev3.1_ep81
>PM: Adding info for No Bus:usbdev3.1
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 20, io base 0x00009000
>PM: Adding info for usb:usb4
>PM: Adding info for No Bus:usbdev4.1_ep00
>usb usb4: configuration #1 chosen from 1 choice
>PM: Adding info for usb:4-0:1.0
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>PM: Adding info for No Bus:usbdev4.1_ep81
>PM: Adding info for No Bus:usbdev4.1
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 18, io mem 0xe2dffc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Adding info for usb:usb5
>PM: Adding info for No Bus:usbdev5.1_ep00
>usb usb5: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-0:1.0
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>PM: Adding info for No Bus:usbdev5.1_ep81
>PM: Adding info for No Bus:usbdev5.1
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.11
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>PM: Adding info for No Bus:host0
>scsi1 : ata_piix
>PM: Adding info for No Bus:host1
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
>usb 1-2: device not accepting address 2, error -71
>ata1.00: Host Protected Area detected:
>	current size: 156299375 sectors
>	native size: 156301488 sectors
>ata1.00: ATA-6: ST380011A, 8.01, max UDMA/100
>ata1.00: 156299375 sectors, multi 16: LBA48 
>ata1.01: ATA-7: MAXTOR STM3802110A, 3.AAJ, max UDMA/100
>ata1.01: 156301488 sectors, multi 16: LBA48 
>ata1.00: Host Protected Area detected:
>	current size: 156299375 sectors
>	native size: 156301488 sectors
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/100
>PM: Adding info for No Bus:target0:0:0
>scsi 0:0:0:0: Direct-Access     ATA      ST380011A        8.01 PQ: 0 ANSI: 5
>PM: Adding info for scsi:0:0:0:0
>sd 0:0:0:0: [sda] 156299375 512-byte hardware sectors (80025 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156299375 512-byte hardware sectors (80025 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>PM: Adding info for No Bus:target0:0:1
>scsi 0:0:1:0: Direct-Access     ATA      MAXTOR STM380211 3.AA PQ: 0 ANSI: 5
>PM: Adding info for scsi:0:0:1:0
>sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb:<6>usb 5-2: new high speed USB device using ehci_hcd and address 2
> sdb1 sdb2
>sd 0:0:1:0: [sdb] Attached SCSI disk
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>PM: Adding info for No Bus:host2
>scsi3 : ata_piix
>PM: Adding info for No Bus:host3
>ata3: SATA max UDMA/133 cmd 0x0001a800 ctl 0x0001a402 bmdma 0x00019400 irq 22
>ata4: SATA max UDMA/133 cmd 0x0001a000 ctl 0x00019802 bmdma 0x00019408 irq 22
>PM: Adding info for usb:5-2
>PM: Adding info for No Bus:usbdev5.2_ep00
>usb 5-2: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-2:1.0
>PM: Adding info for No Bus:usbdev5.2_ep01
>PM: Adding info for No Bus:usbdev5.2_ep82
>PM: Adding info for No Bus:usbdev5.2_ep83
>PM: Adding info for No Bus:usbdev5.2_ep04
>PM: Adding info for No Bus:usbdev5.2
>ata3.00: ATAPI: TSSTcorpCD/DVDW SH-S183A, SB02, max UDMA/33
>ata3.00: applying bridge limits
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>ata3.00: configured for UDMA/33
>PM: Adding info for usb:2-1
>PM: Adding info for No Bus:usbdev2.2_ep00
>usb 2-1: configuration #1 chosen from 1 choice
>PM: Adding info for usb:2-1:1.0
>input: Logitech USB Optical Mouse as /class/input/input2
>input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-1
>PM: Adding info for No Bus:usbdev2.2_ep81
>PM: Adding info for No Bus:usbdev2.2
>PM: Adding info for No Bus:target2:0:0
>scsi 2:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S183A SB02 PQ: 0 ANSI: 5
>PM: Adding info for scsi:2:0:0:0
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1190279733.790:2): selinux=0 auid=4294967295
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>scsi 2:0:0:0: Attached scsi generic sg2 type 5
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>PM: Adding info for platform:floppy.0
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>PM: Adding info for platform:iTCO_wdt
>iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
>PM: Adding info for No Bus:watchdog
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 22
>PM: Adding info for No Bus:i2c-0
>ieee80211_crypt: registered algorithm 'NULL'
>PM: Adding info for No Bus:rtc0
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>parport_pc 00:07: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>PM: Adding info for platform:parport_pc.956
>PM: Removing info for platform:parport_pc.956
>PM: Adding info for platform:parport_pc.888
>PM: Removing info for platform:parport_pc.888
>PM: Adding info for platform:parport_pc.632
>PM: Removing info for platform:parport_pc.632
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>PM: Adding info for No Bus:timer
>usb 5-2: reset high speed USB device using ehci_hcd and address 2
>PM: Adding info for No Bus:seq
>PM: Adding info for No Bus:sequencer
>PM: Adding info for No Bus:sequencer2
>PM: Removing info for No Bus:usbdev5.2_ep01
>PM: Removing info for No Bus:usbdev5.2_ep82
>PM: Removing info for No Bus:usbdev5.2_ep83
>PM: Removing info for No Bus:usbdev5.2_ep04
>PM: Adding info for No Bus:usbdev5.2_ep01
>PM: Adding info for No Bus:usbdev5.2_ep82
>PM: Adding info for No Bus:usbdev5.2_ep83
>PM: Adding info for No Bus:usbdev5.2_ep04
>PM: Adding info for No Bus:5-2
>PM: Removing info for No Bus:5-2
>PM: Adding info for No Bus:5-2
>PM: Removing info for No Bus:5-2
>PM: Removing info for No Bus:usbdev5.2_ep01
>PM: Removing info for No Bus:usbdev5.2_ep82
>PM: Removing info for No Bus:usbdev5.2_ep83
>PM: Removing info for No Bus:usbdev5.2_ep04
>PM: Adding info for No Bus:usbdev5.2_ep01
>PM: Adding info for No Bus:usbdev5.2_ep82
>PM: Adding info for No Bus:usbdev5.2_ep83
>PM: Adding info for No Bus:usbdev5.2_ep04
>zd1211rw 5-2:1.0: firmware version 4725
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>zd1211rw 5-2:1.0: zd1211b chip 0ace:1215 v4810 high 00-02-72 AL2230_RF pa0 g--NS
>PM: Adding info for No Bus:eth0
>zd1211rw 5-2:1.0: eth0
>usbcore: registered new interface driver zd1211rw
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>PM: Adding info for No Bus:pcmC0D2c
>PM: Adding info for No Bus:pcmC0D1p
>PM: Adding info for No Bus:adsp
>PM: Adding info for No Bus:pcmC0D0p
>PM: Adding info for No Bus:pcmC0D0c
>PM: Adding info for No Bus:dsp
>PM: Adding info for No Bus:audio
>PM: Adding info for No Bus:controlC0
>PM: Adding info for No Bus:mixer
>PM: Adding info for No Bus:vcs8
>PM: Adding info for No Bus:vcsa8
>PM: Removing info for No Bus:vcs8
>PM: Removing info for No Bus:vcsa8
>PM: Adding info for No Bus:vcs8
>PM: Adding info for No Bus:vcsa8
>PM: Removing info for No Bus:vcs8
>PM: Removing info for No Bus:vcsa8
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>PM: Adding info for No Bus:vcs8
>PM: Adding info for No Bus:vcsa8
>PM: Adding info for No Bus:i2c-1
>PM: Adding info for No Bus:i2c-2
>PM: Adding info for No Bus:i2c-3
>No dock devices found.
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>PM: Adding info for No Bus:device-mapper
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda2, internal journal
>fuse init (API version 7.8)
>PM: Adding info for No Bus:fuse
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on sdb2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2040248k swap on /dev/sda3.  Priority:-1 extents:1 across:2040248k
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:microcode
>PM: Adding info for platform:microcode
>PM: Adding info for No Bus:microcode
>PM: Removing info for No Bus:microcode
>PM: Adding info for No Bus:microcode
>PM: Removing info for No Bus:microcode
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>PM: Removing info for No Bus:microcode
>PM: Removing info for platform:microcode
>Loading iSCSI transport class v2.0-724.
>iscsi: registered transport (tcp)
>iscsi: registered transport (iser)
>audit(1190265359.545:3): audit_pid=1701 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>PM: Adding info for platform:bluetooth
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8189 buckets, 65512 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs2
>PM: Adding info for No Bus:vcsa2
>PM: Removing info for No Bus:vcs2
>PM: Removing info for No Bus:vcsa2
>PM: Adding info for No Bus:vcs2
>PM: Adding info for No Bus:vcsa2
>PM: Adding info for No Bus:vcs3
>PM: Adding info for No Bus:vcsa3
>PM: Removing info for No Bus:vcs3
>PM: Removing info for No Bus:vcsa3
>PM: Adding info for No Bus:vcs3
>PM: Adding info for No Bus:vcsa3
>PM: Adding info for No Bus:vcs4
>PM: Adding info for No Bus:vcsa4
>PM: Removing info for No Bus:vcs4
>PM: Removing info for No Bus:vcsa4
>PM: Adding info for No Bus:vcs4
>PM: Adding info for No Bus:vcsa4
>PM: Adding info for No Bus:vcs5
>PM: Adding info for No Bus:vcsa5
>PM: Removing info for No Bus:vcs5
>PM: Removing info for No Bus:vcsa5
>PM: Adding info for No Bus:vcs5
>PM: Adding info for No Bus:vcsa5
>PM: Adding info for No Bus:vcs6
>PM: Adding info for No Bus:vcsa6
>PM: Removing info for No Bus:vcs6
>PM: Removing info for No Bus:vcsa6
>PM: Adding info for No Bus:vcs6
>PM: Adding info for No Bus:vcsa6
>PM: Adding info for No Bus:vcs7
>PM: Adding info for No Bus:vcsa7
>PM: Removing info for No Bus:vcs7
>PM: Removing info for No Bus:vcsa7
>PM: Adding info for No Bus:vcs7
>PM: Adding info for No Bus:vcsa7
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>SoftMAC: Associate: Scanning for networks first.
>ieee80211_crypt: registered algorithm 'WEP'
>NET: Registered protocol family 4
>SoftMAC: Scanning finished: scanned 13 channels starting with channel 1
>SoftMAC: Queueing Authentication Request to 00:18:6e:ca:78:b0
>SoftMAC: Cannot associate without being authenticated, requested authentication
>SoftMAC: Sent Authentication Request to 00:18:6e:ca:78:b0.
>SoftMAC: Open Authentication completed with 00:18:6e:ca:78:b0
>SoftMAC: sent association request!
>SoftMAC: associated!
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>usb 5-4: new high speed USB device using ehci_hcd and address 4
>PM: Adding info for usb:5-4
>PM: Adding info for No Bus:usbdev5.4_ep00
>usb 5-4: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-4:1.0
>PM: Adding info for No Bus:usbdev5.4_ep01
>PM: Adding info for No Bus:usbdev5.4_ep82
>PM: Adding info for No Bus:usbdev5.4_ep83
>PM: Adding info for No Bus:usbdev5.4
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>PM: Adding info for No Bus:host4
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>PM: Adding info for No Bus:target4:0:0
>scsi 4:0:0:0: Direct-Access     JetFlash TS1GJFV20        0.00 PQ: 0 ANSI: 2
>PM: Adding info for No Bus:target4:0:1
>PM: Removing info for No Bus:target4:0:1
>PM: Adding info for No Bus:target4:0:2
>PM: Removing info for No Bus:target4:0:2
>PM: Adding info for No Bus:target4:0:3
>PM: Removing info for No Bus:target4:0:3
>PM: Adding info for No Bus:target4:0:4
>PM: Removing info for No Bus:target4:0:4
>PM: Adding info for No Bus:target4:0:5
>PM: Removing info for No Bus:target4:0:5
>PM: Adding info for No Bus:target4:0:6
>PM: Removing info for No Bus:target4:0:6
>PM: Adding info for No Bus:target4:0:7
>PM: Removing info for No Bus:target4:0:7
>PM: Adding info for scsi:4:0:0:0
>sd 4:0:0:0: [sdc] 2015232 512-byte hardware sectors (1032 MB)
>sd 4:0:0:0: [sdc] Write Protect is off
>sd 4:0:0:0: [sdc] Mode Sense: 00 00 00 00
>sd 4:0:0:0: [sdc] Assuming drive cache: write through
>sd 4:0:0:0: [sdc] 2015232 512-byte hardware sectors (1032 MB)
>sd 4:0:0:0: [sdc] Write Protect is off
>sd 4:0:0:0: [sdc] Mode Sense: 00 00 00 00
>sd 4:0:0:0: [sdc] Assuming drive cache: write through
> sdc: sdc1
>sd 4:0:0:0: [sdc] Attached SCSI removable disk
>sd 4:0:0:0: Attached scsi generic sg3 type 0
>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>usb 5-4: USB disconnect, address 4
>PM: Removing info for No Bus:usbdev5.4_ep01
>PM: Removing info for No Bus:usbdev5.4_ep82
>PM: Removing info for No Bus:usbdev5.4_ep83
>PM: Removing info for scsi:4:0:0:0
>PM: Removing info for No Bus:target4:0:0
>PM: Removing info for No Bus:host4
>PM: Removing info for usb:5-4:1.0
>PM: Removing info for No Bus:usbdev5.4
>PM: Removing info for No Bus:usbdev5.4_ep00
>PM: Removing info for usb:5-4

Actions: View

Attachments on bug 249382: 200671 | 200681 | 200701 | 257021 | 257031 | 287941 | 290365