Attachment 201451 Details for Bug 247768 – dmesg from boot to fc6 installer image

dmesg from boot to fc6 installer image

dmesg-fc6.out (text/plain), 15.00 KB, created by Jeff Layton on 2007-09-20 22:39:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jeff Layton

Created: 2007-09-20 22:39:01 UTC

Size: 15.00 KB

patch

obsolete

><5>Linux version 2.6.18-1.2798.fc6 (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Mon Oct 16 14:54:20 EDT 2006
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
><4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
><4> BIOS-e820: 000000001dff0000 - 000000001dffffc0 (ACPI data)
><4> BIOS-e820: 000000001dffffc0 - 000000001e000000 (ACPI NVS)
><4> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
><5>0MB HIGHMEM available.
><5>479MB LOWMEM available.
><4>Using x86 segment limits to approximate NX protection
><7>On node 0 totalpages: 122864
><7>  DMA zone: 4096 pages, LIFO batch:0
><7>  Normal zone: 118768 pages, LIFO batch:31
><6>DMI 2.2 present.
><6>Using APIC driver default
><7>ACPI: RSDP (v000 OID_00                                ) @ 0x000e4010
><7>ACPI: RSDT (v001 OID_00 RSDT_000 0x30303030 & 0x00010000) @ 0x1dfffbd0
><7>ACPI: FADT (v001 INSYDE FACP_000 0x00000100 & 0x00010000) @ 0x1dfffb20
><7>ACPI: BOOT (v001 INSYDE ISC_BOOT 0x00000100 & 0x00010000) @ 0x1dfffba0
><7>ACPI: DSDT (v001 SiS630 INSYDESW 0x00001001 MSFT 0x0100000a) @ 0x00000000
><3>ACPI: BIOS age (1997) fails cutoff (1999), acpi=force is required to enable ACPI
><4>ACPI: Disabling ACPI support
><4>Allocating PCI resources starting at 20000000 (gap: 1e000000:e1fc0000)
><4>Detected 996.903 MHz processor.
><4>Built 1 zonelists.  Total pages: 122864
><5>Kernel command line: 
><4>Local APIC disabled by BIOS -- you can enable it with "lapic"
><7>mapped APIC to ffffd000 (013cc000)
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>CPU 0 irqstacks, hard=c079f000 soft=c077f000
><4>PID hash table entries: 2048 (order: 11, 8192 bytes)
><4>Console: colour VGA+ 80x25
><4>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
><4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
><6>Memory: 476392k/491456k available (2105k kernel code, 14408k reserved, 844k data, 240k init, 0k highmem)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 1994.91 BogoMIPS (lpj=3989827)
><6>Security Framework v1.0.0 initialized
><6>SELinux:  Initializing.
><6>SELinux:  Starting in permissive mode
><6>selinux_register_security:  Registering secondary module capability
><6>Capability LSM initialized as secondary
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
><7>CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
><6>CPU: L1 I cache: 16K, L1 D cache: 16K
><6>CPU: L2 cache: 256K
><7>CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><6>Checking 'hlt' instruction... OK.
><6>SMP alternatives: switching to UP code
><6>Freeing SMP alternatives: 12k freed
><4>CPU0: Intel Pentium III (Coppermine) stepping 0a
><5>SMP motherboard not detected.
><5>Local APIC not detected. Using dummy APIC emulation.
><6>Brought up 1 CPUs
><7>sizeof(vma)=84 bytes
><7>sizeof(page)=32 bytes
><7>sizeof(inode)=424 bytes
><7>sizeof(dentry)=148 bytes
><7>sizeof(ext3inode)=600 bytes
><7>sizeof(buffer_head)=52 bytes
><7>sizeof(skbuff)=172 bytes
><7>sizeof(task_struct)=1392 bytes
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 5802k freed
><6>NET: Registered protocol family 16
><6>PCI: PCI BIOS revision 2.10 entry at 0xeb2e0, last bus=1
><6>PCI: Using configuration type 1
><4>Setting up standard PCI resources
><6>ACPI: Interpreter disabled.
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI: disabled
><6>usbcore: registered new driver usbfs
><6>usbcore: registered new driver hub
><4>PCI: Probing PCI hardware
><7>PCI: Probing PCI hardware (bus 00)
><6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:00.1
><4>Uncovering SIS18 that hid as a SIS503 (compatible=0)
><7>Boot video device is 0000:01:00.0
><6>PCI: Using IRQ router SIS [1039/0018] at 0000:00:01.0
><6>NetLabel: Initializing
><6>NetLabel:  domain hash size = 128
><6>NetLabel:  protocols = UNLABELED CIPSOv4
><6>NetLabel:  unlabeled traffic allowed by default
><4>PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
><6>PCI: Bridge: 0000:00:02.0
><6>  IO window: a000-bfff
><6>  MEM window: 80000000-87ffffff
><6>  PREFETCH window: 88000000-8fffffff
><4>PCI: Bus 2, cardbus bridge: 0000:00:0a.0
><4>  IO window: 00001000-000010ff
><4>  IO window: 00001400-000014ff
><4>  PREFETCH window: 20000000-21ffffff
><4>  MEM window: 22000000-23ffffff
><7>PCI: Setting latency timer of device 0000:00:02.0 to 64
><7>PCI: setting IRQ 5 as level-triggered
><6>PCI: Assigned IRQ 5 for device 0000:00:0a.0
><7>PCI: Setting latency timer of device 0000:00:0a.0 to 64
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
><4>TCP established hash table entries: 16384 (order: 6, 327680 bytes)
><4>TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
><6>TCP: Hash tables configured (established 16384 bind 8192)
><6>TCP reno registered
><6>Simple Boot Flag at 0x37 set to 0x1
><6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
><6>audit: initializing netlink socket (disabled)
><5>audit(1190327956.092:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>SELinux:  Registering netfilter hooks
><6>Initializing Cryptographic API
><4>ksign: Installing public key data
><4>Loading keyring
><4>- Added public key EAA0802BFF323905
><4>- User ID: Red Hat, Inc. (Kernel Module GPG key)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.101 (c) Dave Jones
><6>agpgart: Detected SiS 630 chipset
><6>agpgart: AGP aperture is 64M @ 0x40000000
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
><7>PCI: setting IRQ 10 as level-triggered
><6>PCI: Found IRQ 10 for device 0000:00:01.6
><6>PCI: Sharing IRQ 10 with 0000:00:01.1
><4>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><6>SIS5513: IDE controller at PCI slot 0000:00:00.1
><6>SIS5513: chipset revision 208
><6>SIS5513: not 100% native mode: will probe irqs later
><6>SIS5513: SiS630 ATA 100 (1st gen) controller
><6>    ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
><6>    ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
><7>Probing IDE interface ide0...
><4>hda: TOSHIBA MK2017GAP, ATA DISK drive
><4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
><7>Probing IDE interface ide1...
><4>hdc: QSI DVD-ROM SDR-081, ATAPI CD/DVD-ROM drive
><4>ide1 at 0x170-0x177,0x376 on irq 15
><6>hda: max request size: 128KiB
><6>hda: 39070080 sectors (20003 MB), CHS=38760/16/63, UDMA(100)
><6>hda: cache flushes not supported
><6> hda: hda1 hda2
><4>ide-floppy driver 0.99.newide
><6>Yenta: CardBus bridge found at 0000:00:0a.0 [1558:2202]
><6>Yenta: Enabling burst memory read transactions
><6>Yenta: Using INTVAL to route CSC interrupts to PCI
><6>Yenta: Routing CardBus interrupts to PCI
><6>Yenta TI: socket 0000:00:0a.0, mfunc 0x01d71c77, devctl 0x66
><6>Yenta: ISA IRQ mask 0x0298, PCI irq 5
><6>Socket status: 30000006
><6>usbcore: registered new driver libusual
><6>usbcore: registered new driver hiddev
><6>usbcore: registered new driver usbhid
><6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
><6>PNP: No PS/2 controller found. Probing ports directly.
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>mice: PS/2 mouse device common for all mice
><6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 4.39
><6>TCP bic registered
><6>Initializing IPsec netlink socket
><6>NET: Registered protocol family 1
><6>NET: Registered protocol family 17
><4>Using IPI No-Shortcut mode
><6>Freeing unused kernel memory: 240k freed
><4>Write protecting the kernel read-only data: 370k
><6>Time: tsc clocksource has been installed.
><6>input: AT Translated Set 2 keyboard as /class/input/input0
><6>input: PS/2 Mouse as /class/input/input1
><6>input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
><5>FS-Cache: Loaded
><4>FS-Cache: netfs 'nfs' registered for caching
><6>loop: loaded (max 8 devices)
><6>Floppy drive(s): fd0 is 1.44M
><6>FDC 0 is a post-1991 82077
><6>BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
><6>input: PC Speaker as /class/input/input3
><6>squashfs: version 3.1 (2006/08/09) Phillip Lougher
><6>NET: Registered protocol family 10
><6>lo: Disabled Privacy Extensions
><6>IPv6 over IPv4 tunneling driver
><6>hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33)
><6>Uniform CD-ROM driver Revision: 3.20
><5>SCSI subsystem initialized
><6>Loading iSCSI transport class v2.0-685.<5>iscsi: registered transport (tcp)
><7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
><7>PCI: setting IRQ 11 as level-triggered
><6>PCI: Found IRQ 11 for device 0000:00:01.2
><6>PCI: Sharing IRQ 11 with 0000:00:01.3
><6>ohci_hcd 0000:00:01.2: OHCI Host Controller
><6>ohci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
><6>ohci_hcd 0000:00:01.2: irq 11, io mem 0x44001000
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 3 ports detected
><6>PCI: Found IRQ 11 for device 0000:00:01.3
><6>PCI: Sharing IRQ 11 with 0000:00:01.2
><6>ohci_hcd 0000:00:01.3: OHCI Host Controller
><6>ohci_hcd 0000:00:01.3: new USB bus registered, assigned bus number 2
><6>ohci_hcd 0000:00:01.3: irq 11, io mem 0x44002000
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 3 ports detected
><7>ieee1394: Initialized config rom entry `ip1394'
><6>PCI: Found IRQ 5 for device 0000:00:0a.1
><6>PCI: Sharing IRQ 5 with 0000:00:01.4
><6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5]  MMIO=[44004000-440047ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
><7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000090f50000001b]
><6>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
><6>sis900.c: v1.08.10 Apr. 2 2006
><6>PCI: Found IRQ 10 for device 0000:00:01.1
><6>PCI: Sharing IRQ 10 with 0000:00:01.6
><6>0000:00:01.1: ICS LAN PHY transceiver found at address 1.
><6>0000:00:01.1: Using transceiver found at address 1 as default
><6>eth0: SiS 900 PCI Fast Ethernet at 0x3200, IRQ 10, 00:90:f5:07:67:d1.
><6>eth0: Media Link On 100mbps full-duplex 
><7>eth0: no IPv6 routers present
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><4>Unable to identify CD-ROM format.
><4>VFS: Can't find an ext2 filesystem on dev loop0.
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><4>Unable to identify CD-ROM format.
><4>VFS: Can't find an ext2 filesystem on dev loop0.
><6>security:  3 users, 6 roles, 1560 types, 166 bools, 1 sens, 1024 cats
><6>security:  58 classes, 48173 rules
><6>SELinux:  Completing initialization.
><6>SELinux:  Setting up existing superblocks.
><6>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
><6>SELinux: initialized (dev loop1, type iso9660), uses genfs_contexts
><6>SELinux: initialized (dev 0:15, type nfs), uses genfs_contexts
><6>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
><6>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
><6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><6>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
><6>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
><6>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
><6>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
><6>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
><6>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
><6>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
><6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><6>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
><6>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
><6>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
><6>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
><6>SELinux: initialized (dev proc, type proc), uses genfs_contexts
><6>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
><6>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
><6>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
><5>audit(1190327997.758:2): policy loaded auid=4294967295
><6>md: raid0 personality registered for level 0
><6>md: raid1 personality registered for level 1
><6>raid5: automatically using best checksumming function: pIII_sse
><4>   pIII_sse  :  2051.000 MB/sec
><4>raid5: using function: pIII_sse (2051.000 MB/sec)
><4>raid6: int32x1    274 MB/s
><4>raid6: int32x2    313 MB/s
><4>raid6: int32x4    304 MB/s
><4>raid6: int32x8    270 MB/s
><4>raid6: mmxx1      916 MB/s
><4>raid6: mmxx2     1008 MB/s
><4>raid6: sse1x1     804 MB/s
><4>raid6: sse1x2    1056 MB/s
><4>raid6: using algorithm sse1x2 (1056 MB/s)
><6>md: raid6 personality registered for level 6
><6>md: raid5 personality registered for level 5
><6>md: raid4 personality registered for level 4
><4>GFS2 (built Oct 16 2006 15:01:18) installed
><6>Lock_Nolock (built Oct 16 2006 15:02:21) installed
><6>JFS: nTxBlock = 3771, nTxLock = 30169
><6>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
><6>SGI XFS Quota Management subsystem
><6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
><6>device-mapper: multipath: version 1.0.4 loaded
><6>device-mapper: multipath round-robin: version 1.0.0 loaded
><6>device-mapper: multipath emc: version 0.0.3 loaded
><5>audit(1190328004.839:3): audit_pid=562 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><6>SELinux: initialized (dev loop2, type iso9660), uses genfs_contexts
><4>floppy0: unexpected interrupt 
><4>floppy0: sensei repl[0]=80 
><4>floppy0: unexpected interrupt 
><4>floppy0: sensei repl[0]=80 
><4>floppy0: unexpected interrupt 
><4>floppy0: sensei repl[0]=80 
><4>floppy0: unexpected interrupt 
><4>floppy0: sensei repl[0]=80

Actions: View

Attachments on bug 247768: 201381 | 201391 | 201451 | 202291