Attachment 201461 Details for Bug 298581 – boot with clocksource - still fast clock

boot with clocksource - still fast clock

dmesg_clocksource.txt (text/plain), 19.47 KB, created by David R. Fischer on 2007-09-20 22:41:24 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David R. Fischer

Created: 2007-09-20 22:41:24 UTC

Size: 19.47 KB

patch

obsolete

>Linux version 2.6.22.5-76.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Thu Aug 30 13:08:59 EDT 2007
>Command line: ro root=/dev/rootVG/lv_boot clocksource=acpi_pm vga=1 boot_delay=50 earlyprintk=vga
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003dee0000 (usable)
> BIOS-e820: 000000003dee0000 - 000000003dee3000 (ACPI NVS)
> BIOS-e820: 000000003dee3000 - 000000003def0000 (ACPI data)
> BIOS-e820: 000000003def0000 - 000000003df00000 (reserved)
> BIOS-e820: 000000003e000000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 253664) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.2 present.
>ACPI: RSDP 000F7A10, 0014 (r0 Nvidia)
>ACPI: RSDT 3DEE3040, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
>ACPI: FACP 3DEE30C0, 0074 (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
>ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126]
>ACPI: DSDT 3DEE3180, 6395 (r1 NVIDIA NVDAACPI     1000 MSFT  100000E)
>ACPI: FACS 3DEE0000, 0040
>ACPI: SSDT 3DEE9640, 00D3 (r1 PTLTD  POWERNOW        1  LTP        1)
>ACPI: _HPT 3DEE9780, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA       98)
>ACPI: MCFG 3DEE9800, 003C (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
>ACPI: APIC 3DEE9580, 007C (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003dee0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 253664) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000003dee0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   253664
>On node 0 totalpages: 253567
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1316 pages reserved
>  DMA zone: 2627 pages, LIFO batch:0
>  DMA32 zone: 3412 pages used for memmap
>  DMA32 zone: 246156 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
>SMP: Allowing 2 CPUs, 1 hotplug CPUs
>PERCPU: Allocating 40968 bytes of per cpu data
>Built 1 zonelists.  Total pages: 248783
>Kernel command line: ro root=/dev/rootVG/lv_boot clocksource=acpi_pm vga=1 boot_delay=50 earlyprintk=vga
>boot_delay: 50, preset_lpj: 0, lpj: 1000000, CONFIG_HZ: 1000, printk_delay_msec: 1000000
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 1808.360 MHz processor.
>Console: colour VGA+ 80x50
>console handover: boot [earlyvga0] -> real [tty0]
>Checking aperture...
>CPU 0: aperture @ 867c000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 990640k/1014656k available (2366k kernel code, 23628k reserved, 1400k data, 312k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 3619.02 BogoMIPS (lpj=1809512)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 12558063
>Detected 12.558 MHz APIC timer.
>Brought up 1 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2048 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at f0000000 - f3ffffff
>PCI: No mmconfig possible on device 00:18
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:04.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>Time: tsc clocksource has been installed.
>pnp: 00:01: ioport range 0x1000-0x107f has been reserved
>pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:01: ioport range 0x1400-0x147f has been reserved
>pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
>pnp: 00:01: ioport range 0x1800-0x187f has been reserved
>pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
>pnp: 00:01: ioport range 0x2000-0x207f has been reserved
>pnp: 00:01: ioport range 0x2080-0x20ff has been reserved
>pnp: 00:01: iomem range 0xfec80000-0xfecbffff has been reserved
>pnp: 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved
>pnp: 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved
>pnp: 00:01: iomem range 0x3e000000-0x3fffffff could not be reserved
>pnp: 00:0b: iomem range 0xf0000000-0xf3ffffff could not be reserved
>pnp: 00:0c: iomem range 0xf0000-0xfffff could not be reserved
>pnp: 00:0c: iomem range 0xfeff0000-0xfeff00ff has been reserved
>pnp: 00:0c: iomem range 0x3dee0000-0x3defffff could not be reserved
>pnp: 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
>PCI: Bridge: 0000:00:04.0
>Time: acpi_pm clocksource has been installed.
>  IO window: c000-cfff
>  MEM window: fdf00000-fdffffff
>  PREFETCH window: fd800000-fd8fffff
>PCI: Bridge: 0000:00:09.0
>  IO window: b000-bfff
>  MEM window: fde00000-fdefffff
>  PREFETCH window: fdd00000-fddfffff
>PCI: Bridge: 0000:00:0b.0
>  IO window: a000-afff
>  MEM window: fdc00000-fdcfffff
>  PREFETCH window: fdb00000-fdbfffff
>PCI: Bridge: 0000:00:0c.0
>  IO window: 9000-9fff
>  MEM window: fda00000-fdafffff
>  PREFETCH window: fd900000-fd9fffff
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3828k freed
>audit: initializing netlink socket (disabled)
>audit(1190303216.721:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 4A67DBB026B0246B
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:0d.0
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:09.0:pcie00]
>Allocate Port Service[0000:00:09.0:pcie03]
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0b.0:pcie00]
>Allocate Port Service[0000:00:0b.0:pcie03]
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0c.0:pcie00]
>Allocate Port Service[0000:00:0c.0:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI: Thermal Zone [THRM] (40 C)
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00)
>powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x6
>powernow-k8:    1 : fid 0x2 (1000 MHz), vid 0x12
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 312k freed
>Write protecting the kernel read-only data: 1060k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:02.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.1
>ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>pata_amd 0000:00:06.0: version 0.3.8
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>scsi0 : pata_amd
>scsi1 : pata_amd
>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f000 irq 14
>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f008 irq 15
>ata1.00: ATA-6: WDC WD800JB-00FMA0, 13.03G13, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA 
>ata1.01: ATAPI: ATAPI DVD-ROM 16X Maximum, , max UDMA/33
>ata1.00: configured for UDMA/100
>usb 1-1: new low speed USB device using ohci_hcd and address 2
>ata1.01: configured for UDMA/33
>ata2: port disabled. ignoring.
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD800JB-00FM 13.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: CD-ROM                     DVD-ROM          1.22 PQ: 0 ANSI: 5
>usb 1-1: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft IntelliMouse® Optical as /class/input/input2
>input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-0000:00:02.0-1
>sata_nv 0000:00:08.0: version 3.4
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001d800 irq 21
>ata4: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001d808 irq 21
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATA-7: MAXTOR STM3160815AS, 3.AAD, max UDMA/133
>ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 2:0:0:0: Direct-Access     ATA      MAXTOR STM316081 3.AA PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 2:0:0:0: [sdb] Attached SCSI disk
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1190303242.641:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 0:0:1:0: Attached scsi generic sg1 type 5
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sr0: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
>eth0: RealTek RTL8139 at 0xffffc200001e8000, 00:19:21:2b:99:dd, IRQ 18
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>usbcore: registered new interface driver snd-usb-audio
>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
>FDC 0 is a post-1991 82077
>No dock devices found.
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 3284984k swap on /dev/rootVG/LogVol00.  Priority:-1 extents:1 across:3284984k

Actions: View

Attachments on bug 298581: 200971 | 200981 | 200991 | 201271 | 201441 | 201461