Attachment 202571 Details for Bug 249966 – dmesg output after resume with pm_trace enabled

dmesg output after resume with pm_trace enabled

dmesg-after-resume (text/plain), 33.13 KB, created by Sjoerd Mullender on 2007-09-21 16:50:04 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Sjoerd Mullender

Created: 2007-09-21 16:50:04 UTC

Size: 33.13 KB

patch

obsolete

>Linux version 2.6.22.5-76.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Thu Aug 30 13:47:21 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffe2800 (usable)
> BIOS-e820: 000000003ffe2800 - 0000000040000000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 262114) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262114
>early_node_map[1] active PFN ranges
>    0:        0 ->   262114
>On node 0 totalpages: 262114
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 255 pages used for memmap
>  HighMem zone: 32483 pages, LIFO batch:7
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FDE50, 0014 (r0 DELL  )
>ACPI: RSDT 000FDE64, 0028 (r1 DELL    CPi R   27D40107 ASL        61)
>ACPI: FACP 000FDE90, 0074 (r1 DELL    CPi R   27D40107 ASL        61)
>ACPI: DSDT FFFE4000, 314E (r1 INT430 SYSFexxx     1001 MSFT  100000E)
>ACPI: FACS 3FFFF800, 0040
>ACPI: PM-Timer IO Port: 0x808
>Allocating PCI resources starting at 50000000 (gap: 40000000:beda0000)
>Built 1 zonelists.  Total pages: 260067
>Kernel command line: ro root=LABEL=/1
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (0180f000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0793000 soft=c0773000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1994.167 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1031468k/1048456k available (2111k kernel code, 16260k reserved, 1117k data, 260k init, 130952k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc072d000 - 0xc076e000   ( 260 kB)
>      .data : 0xc060fd60 - 0xc0727504   (1117 kB)
>      .text : 0xc0400000 - 0xc060fd60   (2111 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 3990.76 BogoMIPS (lpj=1995384)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: bfebf1ff 00000000 00000000 0000b080 00000400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0800)
>CPU0: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz stepping 07
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1536 bytes
>Time: 16:13:30  Date: 09/21/07
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
>ACPI: Power Resource [PADA] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 18 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved
>pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved
>pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
>Time: tsc clocksource has been installed.
>pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:02: ioport range 0x800-0x805 has been reserved
>pnp: 00:02: ioport range 0x808-0x80f has been reserved
>pnp: 00:03: ioport range 0x806-0x807 has been reserved
>pnp: 00:03: ioport range 0x810-0x85f has been reserved
>pnp: 00:03: ioport range 0x860-0x87f has been reserved
>pnp: 00:03: ioport range 0x880-0x8bf has been reserved
>pnp: 00:03: ioport range 0x8c0-0x8df has been reserved
>pnp: 00:03: ioport range 0x8e0-0x8ff has been reserved
>pnp: 00:04: ioport range 0xf000-0xf0fe has been reserved
>pnp: 00:04: ioport range 0xf100-0xf1fe has been reserved
>pnp: 00:04: ioport range 0xf200-0xf2fe has been reserved
>pnp: 00:04: ioport range 0xf400-0xf4fe has been reserved
>pnp: 00:04: ioport range 0xf500-0xf5fe has been reserved
>pnp: 00:04: ioport range 0xf600-0xf6fe has been reserved
>pnp: 00:04: ioport range 0xf800-0xf8fe has been reserved
>pnp: 00:04: ioport range 0xf900-0xf9fe has been reserved
>pnp: 00:04: iomem range 0xfa000000-0xfbffffff has been reserved
>pnp: 00:09: ioport range 0x900-0x91f has been reserved
>pnp: 00:09: ioport range 0x3f0-0x3f1 has been reserved
>pnp: 00:10: ioport range 0xbf40-0xbf5f has been reserved
>pnp: 00:11: iomem range 0xfebffc00-0xfebfffff has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: fc000000-fdffffff
>  PREFETCH window: d8000000-e7ffffff
>PCI: Bus 3, cardbus bridge: 0000:02:01.0
>  IO window: 0000e000-0000e0ff
>  IO window: 0000e400-0000e4ff
>  PREFETCH window: 50000000-53ffffff
>  MEM window: f4000000-f7ffffff
>PCI: Bus 7, cardbus bridge: 0000:02:01.1
>  IO window: 0000e800-0000e8ff
>  IO window: 0000fc00-0000fcff
>  PREFETCH window: 54000000-57ffffff
>  MEM window: 60000000-63ffffff
>PCI: Bus 11, cardbus bridge: 0000:02:03.0
>  IO window: 00001000-000010ff
>  IO window: 00001400-000014ff
>  PREFETCH window: 58000000-5bffffff
>  MEM window: 64000000-67ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: e000-ffff
>  MEM window: f4000000-fbffffff
>  PREFETCH window: 50000000-5dffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Enabling device 0000:02:01.1 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2870k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1190391210.858:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 4B1452DF59299530
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Thermal Zone [THM] (57 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 845G Chipset.
>agpgart: AGP aperture is 64M @ 0xe8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Marking TSC unstable due to: possible TSC halt in C2.
>Time: acpi_pm clocksource has been installed.
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:02:01.0 [1028:00d4]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:01.0, mfunc 0x05033002, devctl 0x64
>Yenta: ISA IRQ mask 0x0498, PCI irq 11
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
>cs: IO port probe 0xe000-0xffff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x5dffffff
>Yenta: CardBus bridge found at 0000:02:01.1 [1028:00d4]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:01.1, mfunc 0x05033002, devctl 0x64
>Yenta: ISA IRQ mask 0x0498, PCI irq 11
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
>cs: IO port probe 0xe000-0xffff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x5dffffff
>Yenta: CardBus bridge found at 0000:02:03.0 [12a3:ab01]
>Yenta: Enabling burst memory read transactions
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:03.0, mfunc 0x01000002, devctl 0x60
>Yenta: ISA IRQ mask 0x0000, PCI irq 11
>Socket status: 30000010
>pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
>cs: IO port probe 0xe000-0xffff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x5dffffff
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 7:461:237
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 260k freed
>Write protecting the kernel read-only data: 864k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.11
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>pccard: PCMCIA card inserted into slot 2
>cs: memory probe 0xf4000000-0xfbffffff: excluding 0xf4000000-0xf8ffffff 0xfa000000-0xfbffffff
>pcmcia: registering new device pcmcia2.0
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>ata1.00: ATA-7: FUJITSU MHV2080AH, 000000A0, max UDMA/100
>ata1.00: 156301488 sectors, multi 8: LBA 
>ata1.01: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4241N, A100, max UDMA/33
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata2.00: ATA-5: IC25N040ATCS05-0, CS4OA63A, max UDMA/100
>ata2.00: 78140160 sectors, multi 8: LBA 
>ata2.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2080A 0000 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: CD-ROM            HL-DT-ST RW/DVD GCC-4241N A100 PQ: 0 ANSI: 5
>scsi 1:0:0:0: Direct-Access     ATA      IC25N040ATCS05-0 CS4O PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 78140160 512-byte hardware sectors (40008 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 78140160 512-byte hardware sectors (40008 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 1:0:0:0: [sdb] Attached SCSI disk
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1190391225.598:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 0:0:1:0: Attached scsi generic sg1 type 5
>sd 1:0:0:0: Attached scsi generic sg2 type 0
>cs: IO port probe 0x100-0x3af: excluding 0x280-0x287 0x378-0x37f
>cs: IO port probe 0x100-0x3af: excluding 0x280-0x287 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x100-0x3af: excluding 0x280-0x287 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>iTCO_vendor_support: vendor-support=0
>rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one day
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>3c59x: Donald Becker and others.
>0000:02:00.0: 3Com PCI 3c905C Tornado at f8920c00.
>NET: Registered protocol family 23
>parport_pc 00:0f: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>intel_rng: FWH not detected
>found SMC SuperIO Chip (devid=0x0e rev=01 base=0x002e): LPC47N252
>smsc_ircc_present: can't get sir_base of 0x2f8
>orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
>ACPI: PCI Interrupt 0000:02:01.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>firewire_ohci: Added fw-ohci device 0000:02:01.2, OHCI version 1.0
>orinoco_cs 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
>pcmcia: request for exclusive IRQ could not be fulfilled.
>pcmcia: the driver needs updating to supported shared IRQ lines.
>eth1: Hardware identity 0005:0004:0005:0000
>eth1: Station identity  001f:0001:0008:000a
>eth1: Firmware determined as Lucent/Agere 8.10
>eth1: Ad-hoc demo mode supported
>eth1: IEEE standard IBSS ad-hoc mode supported
>eth1: WEP supported, 104-bit key
>eth1: MAC address 00:02:2D:7C:4B:74
>eth1: Station name "HERMES I"
>eth1: ready
>eth1: orinoco_cs at 2.0, irq 11, io 0xe100-0xe13f
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>firewire_core: created new fw device fw0 (0 config rom retries)
>intel8x0_measure_ac97_clock: measured 50451 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>MC'97 1 converters and GPIO not ready (0xff00)
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery absent)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: ACPI Dock Station Driver 
>input: Lid Switch as /class/input/input3
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1415696k swap on /dev/sda6.  Priority:-1 extents:1 across:1415696k
>eth0:  setting full-duplex.
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>Clocksource tsc unstable (delta = -162371690 ns)
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>eth1: New link status: Disconnected (0002)
>eth1: New link status: Connected (0001)
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>audit(1190391257.719:3): audit_pid=2372 old=0 by auid=4294967295
>eth0: no IPv6 routers present
>vmmon: module license 'unspecified' taints kernel.
>/dev/vmmon[2589]: Module vmmon: registered with major=10 minor=165
>/dev/vmmon[2589]: Module vmmon: initialized
>/dev/vmnet: open called by PID 2612 (vmnet-bridge)
>/dev/vmnet: hub 0 does not exist, allocating memory.
>/dev/vmnet: port on hub 0 successfully opened
>bridge-eth0: enabling the bridge
>bridge-eth0: up
>bridge-eth0: already up
>bridge-eth0: attached
>/dev/vmnet: open called by PID 2627 (vmnet-netifup)
>/dev/vmnet: hub 8 does not exist, allocating memory.
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 2625 (vmnet-natd)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 2644 (vmnet-dhcpd)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 2685 (vmnet-netifup)
>/dev/vmnet: hub 1 does not exist, allocating memory.
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 2697 (vmnet-dhcpd)
>/dev/vmnet: port on hub 1 successfully opened
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8191 buckets, 65528 max)
>ppdev: user-space parallel port driver
>eth1: no IPv6 routers present
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>vmnet8: no IPv6 routers present
>vmnet1: no IPv6 routers present
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PM: Preparing system for mem sleep
>Stopping tasks ... done.
>Suspending console(s)
>platform bluetooth: suspend
>platform dock.0: suspend
>ac97 1-1:HSD11246: suspend
>ac97 0-0:CS4205: suspend
>iTCO_wdt iTCO_wdt: suspend
>rtc rtc0: class suspend
>platform floppy.0: suspend
>sd 1:0:0:0: suspend
>sd 1:0:0:0: [sdb] Synchronizing SCSI cache
>sd 1:0:0:0: [sdb] Stopping disk
>sr 0:0:1:0: suspend
>sd 0:0:0:0: suspend
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>orinoco_cs 2.0: suspend
>hub 2-0:1.0: suspend
>usb usb2: suspend, may wakeup
>hub 1-0:1.0: suspend
>usb usb1: suspend, may wakeup
>psmouse serio1: suspend
>atkbd serio0: suspend
>i8042 i8042: suspend
>serial8250 serial8250: suspend
>platform vesafb.0: suspend
>platform pcspkr: suspend
>system 00:11: suspend
>system 00:10: suspend
>parport_pc 00:0f: suspend
>pnp: Device 00:0f disabled.
>pnp 00:0e: suspend
>serial 00:0d: suspend
>pnp: Device 00:0d disabled.
>pnp 00:0c: suspend
>pnp 00:0b: suspend
>pnp 00:0a: suspend
>system 00:09: suspend
>pnp 00:08: suspend
>rtc_cmos 00:07: suspend, may wakeup
>i8042 kbd 00:06: suspend
>i8042 aux 00:05: suspend
>system 00:04: suspend
>system 00:03: suspend
>system 00:02: suspend
>pnp 00:01: suspend
>system 00:00: suspend
>yenta_cardbus 0000:02:03.0: suspend
>firewire_ohci 0000:02:01.2: suspend
>yenta_cardbus 0000:02:01.1: suspend
>yenta_cardbus 0000:02:01.0: suspend
>3c59x 0000:02:00.0: suspend
>pci 0000:01:00.0: suspend
>Intel ICH Modem 0000:00:1f.6: suspend
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>Intel ICH 0000:00:1f.5: suspend
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ata_piix 0000:00:1f.1: suspend
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>pci_set_power_state(): 0000:00:1f.1: state=3, current state=5
>pci 0000:00:1f.0: suspend
>pci 0000:00:1e.0: suspend
>uhci_hcd 0000:00:1d.2: suspend
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>uhci_hcd 0000:00:1d.0: suspend
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>pci 0000:00:01.0: suspend
>agpgart-intel 0000:00:00.0: suspend
>thermal thermal:01: suspend
>acpi thermal:00: suspend
>acpi device:21: suspend
>acpi device:20: suspend
>acpi device:1f: suspend
>power power_resource:00: suspend
>acpi device:1e: suspend
>acpi device:1d: suspend
>acpi device:1c: suspend
>acpi device:1b: suspend
>acpi device:1a: suspend
>acpi device:19: suspend
>acpi device:18: suspend
>acpi device:17: suspend
>video video:00: suspend
>acpi device:16: suspend
>acpi device:15: suspend
>acpi device:14: suspend
>acpi device:13: suspend
>acpi device:12: suspend
>acpi device:11: suspend
>acpi device:10: suspend
>pci_link PNP0C0F:03: suspend
>pci_link PNP0C0F:02: suspend
>pci_link PNP0C0F:01: suspend
>pci_link PNP0C0F:00: suspend
>acpi PNP0C01:06: suspend
>acpi PNP0C01:05: suspend
>acpi device:0f: suspend
>acpi device:0e: suspend
>acpi device:0d: suspend
>acpi device:0c: suspend
>acpi device:0b: suspend
>acpi device:0a: suspend
>acpi device:09: suspend
>acpi device:08: suspend
>acpi device:07: suspend
>acpi device:06: suspend
>acpi device:05: suspend
>acpi device:04: suspend
>acpi device:03: suspend
>acpi device:02: suspend
>acpi PNP0401:00: suspend
>acpi SMCF010:00: suspend
>acpi PNP0501:00: suspend
>acpi PNP0700:00: suspend
>acpi PNP0C04:00: suspend
>acpi PNP0200:00: suspend
>acpi PNP0000:00: suspend
>acpi PNP0C01:04: suspend
>acpi PNP0800:00: suspend
>acpi PNP0100:00: suspend
>acpi PNP0B00:00: suspend
>acpi PNP0303:00: suspend
>acpi PNP0F13:00: suspend
>acpi device:01: suspend
>acpi PNP0C01:03: suspend
>acpi PNP0C01:02: suspend
>acpi PNP0C01:01: suspend
>pci_root PNP0A03:00: suspend
>acpi PNP0C01:00: suspend
>button PNP0C0E:00: suspend
>button PNP0C0C:00: suspend
>button PNP0C0D:00: suspend
>battery PNP0C0A:01: suspend
>battery PNP0C0A:00: suspend
>ac ACPI0003:00: suspend
>acpi device:00: suspend
>processor ACPI0007:00: suspend
>acpi acpi_system:00: suspend
>Disabling non-boot CPUs ...
>PM: Entering mem sleep
>platform bluetooth: LATE suspend
>platform dock.0: LATE suspend
>iTCO_wdt iTCO_wdt: LATE suspend
>platform floppy.0: LATE suspend
>serial8250 serial8250: LATE suspend
>platform vesafb.0: LATE suspend
>platform pcspkr: LATE suspend
>yenta_cardbus 0000:02:03.0: LATE suspend
>firewire_ohci 0000:02:01.2: LATE suspend
>yenta_cardbus 0000:02:01.1: LATE suspend
>yenta_cardbus 0000:02:01.0: LATE suspend
>3c59x 0000:02:00.0: LATE suspend
>pci 0000:01:00.0: LATE suspend
>Intel ICH Modem 0000:00:1f.6: LATE suspend
>Intel ICH 0000:00:1f.5: LATE suspend
>pci 0000:00:1f.0: LATE suspend
>pci 0000:00:1e.0: LATE suspend
>pci 0000:00:01.0: LATE suspend
>agpgart-intel 0000:00:00.0: LATE suspend
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal LVT vector (0xf0) already installed
>Back to C!
>agpgart-intel 0000:00:00.0: EARLY resume
>pci 0000:00:01.0: EARLY resume
>uhci_hcd 0000:00:1d.0: EARLY resume
>uhci_hcd 0000:00:1d.2: EARLY resume
>pci 0000:00:1e.0: EARLY resume
>pci 0000:00:1f.0: EARLY resume
>ata_piix 0000:00:1f.1: EARLY resume
>Intel ICH 0000:00:1f.5: EARLY resume
>Intel ICH Modem 0000:00:1f.6: EARLY resume
>pci 0000:01:00.0: EARLY resume
>3c59x 0000:02:00.0: EARLY resume
>yenta_cardbus 0000:02:01.0: EARLY resume
>yenta_cardbus 0000:02:01.1: EARLY resume
>firewire_ohci 0000:02:01.2: EARLY resume
>yenta_cardbus 0000:02:03.0: EARLY resume
>platform pcspkr: EARLY resume
>platform vesafb.0: EARLY resume
>serial8250 serial8250: EARLY resume
>i8042 i8042: EARLY resume
>platform floppy.0: EARLY resume
>iTCO_wdt iTCO_wdt: EARLY resume
>platform dock.0: EARLY resume
>platform bluetooth: EARLY resume
>PM: Finishing wakeup.
>acpi acpi_system:00: resuming
>processor ACPI0007:00: resuming
>acpi device:00: resuming
>ac ACPI0003:00: resuming
>battery PNP0C0A:00: resuming
>battery PNP0C0A:01: resuming
>button PNP0C0D:00: resuming
>button PNP0C0C:00: resuming
>button PNP0C0E:00: resuming
>acpi PNP0C01:00: resuming
>pci_root PNP0A03:00: resuming
>acpi PNP0C01:01: resuming
>acpi PNP0C01:02: resuming
>acpi PNP0C01:03: resuming
>acpi device:01: resuming
>acpi PNP0F13:00: resuming
>acpi PNP0303:00: resuming
>acpi PNP0B00:00: resuming
>acpi PNP0100:00: resuming
>acpi PNP0800:00: resuming
>acpi PNP0C01:04: resuming
>acpi PNP0000:00: resuming
>acpi PNP0200:00: resuming
>acpi PNP0C04:00: resuming
>acpi PNP0700:00: resuming
>acpi PNP0501:00: resuming
>acpi SMCF010:00: resuming
>acpi PNP0401:00: resuming
>acpi device:02: resuming
>acpi device:03: resuming
>acpi device:04: resuming
>acpi device:05: resuming
>acpi device:06: resuming
>acpi device:07: resuming
>acpi device:08: resuming
>acpi device:09: resuming
>acpi device:0a: resuming
>acpi device:0b: resuming
>acpi device:0c: resuming
>acpi device:0d: resuming
>acpi device:0e: resuming
>acpi device:0f: resuming
>acpi PNP0C01:05: resuming
>acpi PNP0C01:06: resuming
>pci_link PNP0C0F:00: resuming
>pci_link PNP0C0F:01: resuming
>pci_link PNP0C0F:02: resuming
>pci_link PNP0C0F:03: resuming
>acpi device:10: resuming
>acpi device:11: resuming
>acpi device:12: resuming
>acpi device:13: resuming
>acpi device:14: resuming
>acpi device:15: resuming
>acpi device:16: resuming
>video video:00: resuming
>acpi device:17: resuming
>acpi device:18: resuming
>acpi device:19: resuming
>acpi device:1a: resuming
>acpi device:1b: resuming
>acpi device:1c: resuming
>acpi device:1d: resuming
>acpi device:1e: resuming
>power power_resource:00: resuming
>acpi device:1f: resuming
>acpi device:20: resuming
>acpi device:21: resuming
>acpi thermal:00: resuming
>thermal thermal:01: resuming
>agpgart-intel 0000:00:00.0: resuming
>pci 0000:00:01.0: resuming
>uhci_hcd 0000:00:1d.0: resuming
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb1: root hub lost power or was reset
>uhci_hcd 0000:00:1d.2: resuming
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb2: root hub lost power or was reset
>pci 0000:00:1e.0: resuming
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>pci 0000:00:1f.0: resuming
>ata_piix 0000:00:1f.1: resuming
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>Intel ICH 0000:00:1f.5: resuming
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>Intel ICH Modem 0000:00:1f.6: resuming
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>ata1.00: configured for UDMA/100
>pci 0000:01:00.0: resuming
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>3c59x 0000:02:00.0: resuming
>ata1.01: configured for UDMA/33
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>eth0:  setting full-duplex.
>yenta_cardbus 0000:02:01.0: resuming
>yenta_cardbus 0000:02:01.1: resuming
>firewire_ohci 0000:02:01.2: resuming
>ata2.00: configured for UDMA/100
>sd 1:0:0:0: [sdb] 78140160 512-byte hardware sectors (40008 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>yenta_cardbus 0000:02:03.0: resuming
>system 00:00: resuming
>pnp 00:01: resuming
>system 00:02: resuming
>system 00:03: resuming
>system 00:04: resuming
>i8042 aux 00:05: resuming
>i8042 kbd 00:06: resuming
>rtc_cmos 00:07: resuming
>pnp 00:08: resuming
>system 00:09: resuming
>pnp 00:0a: resuming
>pnp 00:0b: resuming
>pnp 00:0c: resuming
>serial 00:0d: resuming
>pnp: Device 00:0d activated.
>pnp 00:0e: resuming
>parport_pc 00:0f: resuming
>pnp: Device 00:0f activated.
>system 00:10: resuming
>system 00:11: resuming
>platform pcspkr: resuming
>platform vesafb.0: resuming
>serial8250 serial8250: resuming
>i8042 i8042: resuming
>atkbd serio0: resuming
>psmouse serio1: resuming
>usb usb1: resuming
>hub 1-0:1.0: resuming
>usb usb2: resuming
>hub 2-0:1.0: resuming
>orinoco_cs 2.0: resuming
>sd 0:0:0:0: resuming
>sd 0:0:0:0: [sda] Starting disk
>sr 0:0:1:0: resuming
>sd 1:0:0:0: resuming
>sd 1:0:0:0: [sdb] Starting disk
>platform floppy.0: resuming
>rtc rtc0: class resume
>iTCO_wdt iTCO_wdt: resuming
>ac97 0-0:CS4205: resuming
>ac97 1-1:HSD11246: resuming
>platform dock.0: resuming
>platform bluetooth: resuming
>Restarting tasks ... <6>eth1: New link status: Connected (0001)
>done.

Actions: View

Attachments on bug 249966: 202571 | 202581 | 202591 | 204451 | 291334