Attachment 203171 Details for Bug 242956 – Output from the three commands

Output from the three commands

242956.txt (text/plain), 79.26 KB, created by K Pedersen on 2007-09-22 17:33:30 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: K Pedersen

Created: 2007-09-22 17:33:30 UTC

Size: 79.26 KB

patch

obsolete

>lspci -vvxx
>
>00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81d2
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Capabilities: [44] HyperTransport: Slave or Primary Interface
>		Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
>		Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
>		Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>		Link Control 1: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b-
>		Link Config 1: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>		Revision ID: 1.03
>		Link Frequency 0: 1.0GHz
>		Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
>		Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>		Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
>		Link Frequency 1: 1.0GHz
>		Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
>		Link Frequency Capability 1: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>		Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>		Prefetchable memory behind bridge Upper: 00-00
>		Bus Number: 00
>	Capabilities: [e0] HyperTransport: MSI Mapping
>00: de 10 f4 02 06 01 b0 00 a2 00 00 05 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 d2 81
>30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
>
>00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81d2
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>00: de 10 fa 02 00 01 20 00 a2 00 00 05 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 d2 81
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81d2
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>00: de 10 fe 02 00 00 20 00 a2 00 00 05 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 d2 81
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81d2
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>00: de 10 f8 02 00 01 a0 00 a2 00 00 05 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 d2 81
>30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
>
>00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81d2
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>00: de 10 f9 02 06 01 a0 00 a2 00 00 05 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 d2 81
>30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
>
>00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81d2
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Capabilities: [44] #00 [0000]
>00: de 10 ff 02 06 01 b0 00 a2 00 00 05 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 d2 81
>30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00
>
>00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81d2
>	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>00: de 10 7f 02 02 01 20 00 a2 00 00 05 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 d2 81
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81d2
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>00: de 10 7e 02 00 00 20 00 a2 00 00 05 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 d2 81
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
>	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] #0d [0000]
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [60] HyperTransport: MSI Mapping
>	Capabilities: [80] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 <4us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 2
>		Link: Latency L0s <512ns, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x1
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
>		Slot: Number 0, PowerLimit 0.000000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Off, PwrInd On, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>00: de 10 fc 02 04 00 10 00 a1 00 04 06 10 00 01 00
>10: 00 00 00 00 00 00 00 00 00 01 01 00 f1 01 00 00
>20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
>
>00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	I/O behind bridge: 0000e000-0000efff
>	Memory behind bridge: d7f00000-d7ffffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] #0d [0000]
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [60] HyperTransport: MSI Mapping
>	Capabilities: [80] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 <4us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 1
>		Link: Latency L0s <512ns, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x1
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
>		Slot: Number 0, PowerLimit 0.000000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Off, PwrInd On, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>00: de 10 fd 02 07 00 10 00 a1 00 04 06 10 00 01 00
>10: 00 00 00 00 00 00 00 00 00 02 02 00 e1 e1 00 00
>20: f0 d7 f0 d7 f1 ff 01 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
>
>00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>	Memory behind bridge: d8000000-deefffff
>	Prefetchable memory behind bridge: 00000000c0000000-00000000cff00000
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>	Capabilities: [40] #0d [0000]
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [60] HyperTransport: MSI Mapping
>	Capabilities: [80] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 <4us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 0
>		Link: Latency L0s <512ns, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x16
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
>		Slot: Number 0, PowerLimit 0.000000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Off, PwrInd On, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>00: de 10 fb 02 07 00 10 00 a1 00 04 06 10 00 01 00
>10: 00 00 00 00 00 00 00 00 00 03 03 00 f1 01 00 20
>20: 00 d8 e0 de 01 c0 f1 cf 00 00 00 00 00 00 00 00
>30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 0a 00
>
>00:09.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a4)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 815a
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Capabilities: [44] HyperTransport: Slave or Primary Interface
>		Command: BaseUnitID=9 UnitCnt=15 MastHost- DefDir- DUL-
>		Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn- ExtCTL- 64b-
>		Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>		Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>		Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
>		Revision ID: 1.03
>		Link Frequency 0: 1.0GHz
>		Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
>		Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>		Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
>		Link Frequency 1: 200MHz
>		Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
>		Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>		Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>		Prefetchable memory behind bridge Upper: 00-00
>		Bus Number: 00
>	Capabilities: [e0] HyperTransport: MSI Mapping
>00: de 10 5e 00 06 00 b0 00 a4 00 80 05 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 5a 81
>30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00
>
>00:0a.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev b1)
>	Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>00: de 10 50 00 0f 00 a0 00 b1 00 01 06 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 5a 81
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:0a.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
>	Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin A routed to IRQ 10
>	Region 0: I/O ports at dc00 [size=32]
>	Region 4: I/O ports at 0600 [size=64]
>	Region 5: I/O ports at 0700 [size=64]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>00: de 10 52 00 01 00 b0 00 a2 00 05 0c 00 00 80 00
>10: 01 dc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 01 06 00 00 01 07 00 00 00 00 00 00 43 10 5a 81
>30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 03 01
>
>00:0b.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI])
>	Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0 (750ns min, 250ns max)
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at d7efe000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>00: de 10 5a 00 07 00 b0 00 a2 10 03 0c 00 00 80 00
>10: 00 e0 ef d7 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 5a 81
>30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 03 01
>
>00:0b.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a4) (prog-if 20 [EHCI])
>	Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0 (750ns min, 250ns max)
>	Interrupt: pin B routed to IRQ 17
>	Region 0: Memory at d7effc00 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [44] Debug port
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>00: de 10 5b 00 06 00 b0 00 a4 20 03 0c 00 00 80 00
>10: 00 fc ef d7 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 5a 81
>30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 02 03 01
>
>00:0d.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
>	Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0 (500ns min, 1250ns max)
>	Interrupt: pin A routed to IRQ 17
>	Region 0: I/O ports at d400 [size=256]
>	Region 1: I/O ports at d000 [size=256]
>	Region 2: Memory at d7efd000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>00: de 10 59 00 07 00 b0 00 a2 00 01 04 00 00 00 00
>10: 01 d4 00 00 01 d0 00 00 00 d0 ef d7 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 2a 81
>30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 02 05
>
>00:0f.0 IDE interface: nVidia Corporation CK804 IDE (rev f3) (prog-if 8a [Master SecP PriP])
>	Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0 (750ns min, 250ns max)
>	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
>	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
>	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
>	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
>	Region 4: I/O ports at ffa0 [size=16]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>00: de 10 53 00 05 00 b0 00 f3 8a 01 01 00 00 00 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: a1 ff 00 00 00 00 00 00 00 00 00 00 43 10 5a 81
>30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
>
>00:10.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
>	Subsystem: ASUSTeK Computer Inc. Unknown device 815a
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0 (750ns min, 250ns max)
>	Interrupt: pin A routed to IRQ 18
>	Region 0: I/O ports at cc00 [size=8]
>	Region 1: I/O ports at c880 [size=4]
>	Region 2: I/O ports at c800 [size=8]
>	Region 3: I/O ports at c480 [size=4]
>	Region 4: I/O ports at c400 [size=16]
>	Region 5: Memory at d7efc000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>00: de 10 54 00 07 00 b0 00 f3 85 01 01 00 00 00 00
>10: 01 cc 00 00 81 c8 00 00 01 c8 00 00 81 c4 00 00
>20: 01 c4 00 00 00 c0 ef d7 00 00 00 00 43 10 5a 81
>30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01
>
>00:11.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
>	Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0 (750ns min, 250ns max)
>	Interrupt: pin A routed to IRQ 19
>	Region 0: I/O ports at c080 [size=8]
>	Region 1: I/O ports at c000 [size=4]
>	Region 2: I/O ports at bc00 [size=8]
>	Region 3: I/O ports at b880 [size=4]
>	Region 4: I/O ports at b800 [size=16]
>	Region 5: Memory at d7efb000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>00: de 10 55 00 07 00 b0 00 f3 85 01 01 00 00 00 00
>10: 81 c0 00 00 01 c0 00 00 01 bc 00 00 81 b8 00 00
>20: 01 b8 00 00 00 b0 ef d7 00 00 00 00 43 10 5a 81
>30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01
>
>00:12.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
>	Memory behind bridge: def00000-dfffffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>00: de 10 5c 00 06 00 a0 00 a2 01 04 06 00 00 01 00
>10: 00 00 00 00 00 00 00 00 00 04 04 40 f0 00 80 a2
>20: f0 de f0 df f0 ff 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 02
>
>00:13.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
>	Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0 (250ns min, 5000ns max)
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at d7efa000 (32-bit, non-prefetchable) [size=4K]
>	Region 1: I/O ports at b480 [size=8]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>00: de 10 57 00 07 00 b0 00 a3 00 80 06 00 00 00 00
>10: 00 a0 ef d7 81 b4 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 41 81
>30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 01 14
>
>00:16.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
>	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [58] HyperTransport: MSI Mapping
>	Capabilities: [80] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 <4us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 1
>		Link: Latency L0s <512ns, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x8
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
>		Slot: Number 2, PowerLimit 25.000000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Off, PwrInd On, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>00: de 10 5d 00 04 00 10 00 a3 00 04 06 10 00 01 00
>10: 00 00 00 00 00 00 00 00 00 05 05 00 f1 01 00 00
>20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
>
>00:17.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
>	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [58] HyperTransport: MSI Mapping
>	Capabilities: [80] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 <4us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 0
>		Link: Latency L0s <512ns, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x16
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
>		Slot: Number 1, PowerLimit 75.000000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Off, PwrInd On, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>00: de 10 5d 00 04 00 10 00 a3 00 04 06 10 00 01 00
>10: 00 00 00 00 00 00 00 00 00 06 06 00 f1 01 00 00
>20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
>
>00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Capabilities: [80] HyperTransport: Host or Secondary Interface
>		!!! Possibly incomplete decoding
>		Command: WarmRst+ DblEnd-
>		Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
>		Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
>		Revision ID: 1.02
>00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
>
>00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00
>10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
>02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 15)
>	Subsystem: ASUSTeK Computer Inc. Marvell 88E8053 Gigabit Ethernet controller PCIe (Asus)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 20
>	Region 0: Memory at d7ffc000 (64-bit, non-prefetchable) [size=16K]
>	Region 2: I/O ports at e800 [size=256]
>	Expansion ROM at d7fc0000 [disabled] [size=128K]
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [50] Vital Product Data
>	Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [e0] Express Legacy Endpoint IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 1
>		Link: Latency L0s <256ns, L1 unlimited
>		Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x1
>00: ab 11 62 43 07 01 10 00 15 00 00 02 10 00 00 00
>10: 04 c0 ff d7 00 00 00 00 01 e8 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 42 81
>30: 00 00 fc d7 48 00 00 00 00 00 00 00 0a 01 00 00
>
>03:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600 GT] (rev a2) (prog-if 00 [VGA])
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81cf
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 20
>	Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=64M]
>	Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
>	Region 3: Memory at dd000000 (64-bit, non-prefetchable) [size=16M]
>	Expansion ROM at deee0000 [disabled] [size=128K]
>	Capabilities: [60] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [78] Express Endpoint IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 <4us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
>		Link: Latency L0s <1us, L1 <4us
>		Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x16
>00: de 10 40 01 07 00 10 00 a2 00 00 03 00 00 00 00
>10: 00 00 00 d8 0c 00 00 c0 00 00 00 00 04 00 00 dd
>20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 cf 81
>30: 00 00 ee de 60 00 00 00 00 00 00 00 0a 01 00 00
>
>04:08.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
>	Subsystem: LeadTek Research Inc. Unknown device 6611
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (5000ns min, 13750ns max), Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 21
>	Region 0: Memory at df000000 (32-bit, non-prefetchable) [size=16M]
>	Capabilities: [44] Vital Product Data
>	Capabilities: [4c] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>00: f1 14 00 88 16 01 90 02 05 00 00 04 10 40 80 00
>10: 00 00 00 df 00 00 00 00 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 7d 10 11 66
>30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 14 37
>
>04:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
>	Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 20
>	Region 0: Memory at defff800 (32-bit, non-prefetchable) [size=2K]
>	Region 1: Memory at deff8000 (32-bit, non-prefetchable) [size=16K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
>00: 4c 10 23 80 16 01 10 02 00 10 00 0c 10 40 00 00
>10: 00 f8 ff de 00 80 ff de 00 00 00 00 00 00 00 00
>20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 8b 80
>30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 02 04
>
>==============================================================================================================
>
>dmesg
>
>Linux version 2.6.22.5-49.fc6 (brewbuilder@hs20-bc1-5.build.redhat.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-13)) #1 SMP Thu Aug 30 14:25:46 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
> BIOS-e820: 000000000009bc00 - 000000000009c000 (reserved)
> BIOS-e820: 00000000000e9b90 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
> BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
> BIOS-e820: 000000003ffbe000 - 000000003ffe0000 (ACPI NVS)
> BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 262064) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262064
>early_node_map[1] active PFN ranges
>    0:        0 ->   262064
>On node 0 totalpages: 262064
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 255 pages used for memmap
>  HighMem zone: 32433 pages, LIFO batch:7
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FB520, 0024 (r2 ACPIAM)
>ACPI: XSDT 3FFB0100, 0044 (r1 A M I  OEMXSDT   7000613 MSFT       97)
>ACPI: FACP 3FFB0290, 00F4 (r3 A M I  OEMFACP   7000613 MSFT       97)
>ACPI: DSDT 3FFB0440, 6A09 (r1  A0371 A0371001        1 INTL  2002026)
>ACPI: FACS 3FFBE000, 0040
>ACPI: APIC 3FFB0390, 0070 (r1 A M I  OEMAPIC   7000613 MSFT       97)
>ACPI: MCFG 3FFB0400, 003C (r1 A M I  OEMMCFG   7000613 MSFT       97)
>ACPI: OEMB 3FFBE040, 0056 (r1 A M I  AMI_OEM   7000613 MSFT       97)
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x508
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:15 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>Built 1 zonelists.  Total pages: 260017
>Kernel command line: ro root=LABEL=/ rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07cd000 soft=c07ad000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2210.073 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1032280k/1048256k available (2253k kernel code, 15148k reserved, 1204k data, 264k init, 130752k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0766000 - 0xc07a8000   ( 264 kB)
>      .data : 0xc0633508 - 0xc0760584   (1204 kB)
>      .text : 0xc0400000 - 0xc0633508   (2253 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 4421.59 BogoMIPS (lpj=2210798)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: After all inits, caps: 078bf3ff e3d3fbff 00000000 00000410 00000001 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02
>Total of 1 processors activated (4421.59 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1536 bytes
>Time:  8:04:15  Date: 08/22/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:12.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2P._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 17 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>pnp: 00:09: iomem range 0xfee01000-0xfeefffff could not be reserved
>pnp: 00:09: iomem range 0xfefff000-0xfeffffff has been reserved
>pnp: 00:09: iomem range 0xffb00000-0xfffeffff could not be reserved
>pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
>pnp: 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
>pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
>pnp: 00:0e: ioport range 0xc00-0xc0f has been reserved
>pnp: 00:0e: ioport range 0xd00-0xd0f has been reserved
>pnp: 00:0e: ioport range 0xa20-0xa2f has been reserved
>pnp: 00:0e: ioport range 0xa30-0xa3f has been reserved
>pnp: 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
>pnp: 00:10: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:10: iomem range 0xc0000-0xcffff could not be reserved
>pnp: 00:10: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:10: iomem range 0x100000-0x3fffffff could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: e000-efff
>  MEM window: d7f00000-d7ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: d8000000-deefffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bridge: 0000:00:12.0
>  IO window: disabled.
>  MEM window: def00000-dfffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:16.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:17.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:12.0 to 64
>PCI: Setting latency timer of device 0000:00:16.0 to 64
>PCI: Setting latency timer of device 0000:00:17.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 1504k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1190448255.271:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key C04F19BEB3D31305
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Found disabled HT MSI Mapping on 0000:00:16.0
>PCI: Found disabled HT MSI Mapping on 0000:00:00.0
>PCI: MSI quirk detected. MSI disabled on chipset 0000:00:16.0.
>PCI: Found disabled HT MSI Mapping on 0000:00:17.0
>PCI: Found disabled HT MSI Mapping on 0000:00:00.0
>PCI: MSI quirk detected. MSI disabled on chipset 0000:00:17.0.
>Boot video device is 0000:03:00.0
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>PCI: Setting latency timer of device 0000:00:16.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:16.0:pcie00]
>PCI: Setting latency timer of device 0000:00:17.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:17.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE-CK804: IDE controller at PCI slot 0000:00:0f.0
>NFORCE-CK804: chipset revision 243
>NFORCE-CK804: not 100% native mode: will probe irqs later
>NFORCE-CK804: 0000:00:0f.0 (rev f3) UDMA133 controller
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (version 2.00.00)
>powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x6
>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x8
>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xa
>powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
>Using IPI No-Shortcut mode
>  Magic number: 7:32:69
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 264k freed
>Write protecting the kernel read-only data: 927k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0b.0: irq 16, io mem 0xd7efe000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:0b.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:0b.1
>ehci_hcd 0000:00:0b.1: irq 17, io mem 0xd7effc00
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>sata_nv 0000:00:10.0: version 3.4
>ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 18
>sata_nv 0000:00:10.0: Using ADMA mode
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0xf8820480 ctl 0xf88204a0 bmdma 0x0001c400 irq 18
>ata2: SATA max UDMA/133 cmd 0xf8820580 ctl 0xf88205a0 bmdma 0x0001c408 irq 18
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: ST3250824AS, 3.AAH, max UDMA/133
>ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
>ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata2.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      ST3250824AS      3.AA PQ: 0 ANSI: 5
>ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      ST3250823AS      3.03 PQ: 0 ANSI: 5
>ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >
>sd 1:0:0:0: [sdb] Attached SCSI disk
>ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LSA1] -> GSI 20 (level, low) -> IRQ 19
>sata_nv 0000:00:11.0: Using ADMA mode
>PCI: Setting latency timer of device 0000:00:11.0 to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0xf8832480 ctl 0xf88324a0 bmdma 0x0001b800 irq 19
>ata4: SATA max UDMA/133 cmd 0xf8832580 ctl 0xf88325a0 bmdma 0x0001b808 irq 19
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
>ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata3.00: configured for UDMA/133
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata4.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
>ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata4.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      ST3250823AS      3.03 PQ: 0 ANSI: 5
>ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 >
>sd 2:0:0:0: [sdc] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
>ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>sd 3:0:0:0: [sdd] 625142448 512-byte hardware sectors (320073 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdd] 625142448 512-byte hardware sectors (320073 MB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1 sdd2
>sd 3:0:0:0: [sdd] Attached SCSI disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1190448262.321:2): selinux=0 auid=4294967295
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
>Uniform CD-ROM driver Revision: 3.20
>gameport: NS558 PnP Gameport is pnp00:07/gameport0, io 0x201, speed 59659kHz
>parport_pc 00:06: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:04:0b.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 20
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[defff800-deffffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LMAC] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:13.0 to 64
>forcedeth: using HIGHDMA
>nvidia: module license 'NVIDIA' taints kernel.
>eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:13.0
>Linux video capture interface: v2.00
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>sky2 0000:02:00.0: v1.14 addr 0xd7ffc000 irq 20 Yukon-EC (0xb6) rev 2
>sky2 eth1: addr 00:1b:fc:4a:86:06
>ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.11  Wed Jun 13 18:21:22 PDT 2007
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d8000149c862]
>cx2388x v4l2 driver version 0.0.6 loaded
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [LNKC] -> GSI 18 (level, low) -> IRQ 21
>CORE cx88[0]: subsystem: 107d:6611, board: Leadtek Winfast 2000XP Expert [card=5,autodetected]
>TV tuner 44 at 0x1fe, Radio tuner -1 at 0x1fe
>cx88[0]: Leadtek Winfast 2000XP Expert config: tuner=38, eeprom[0]=0x01
>input: cx88 IR (Leadtek Winfast 2000XP as /class/input/input3
>cx88[0]/0: found at 0000:04:08.0, rev: 5, irq: 21, latency: 64, mmio: 0xdf000000
>tuner 2-0043: chip found @ 0x86 (cx88[0])
>tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
>tuner 2-0060: All bytes are equal. It is not a TEA5767
>tuner 2-0060: chip found @ 0xc0 (cx88[0])
>tuner 2-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
>tuner 2-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
>cx88[0]/0: registered device video0 [v4l2]
>cx88[0]/0: registered device vbi0
>cx88[0]/0: registered device radio0
>ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LACI] -> GSI 22 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>intel8x0_measure_ac97_clock: measured 75724 usecs
>intel8x0: clocking to 47205
>FDC 0 is a post-1991 82077
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda7, internal journal
>ReiserFS: sda10: found reiserfs format "3.6" with standard journal
>ReiserFS: sda10: using ordered data mode
>ReiserFS: sda10: journal params: device sda10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda10: checking transaction log (sda10)
>ReiserFS: sda10: Using r5 hash to sort names
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.8)
>Adding 1044184k swap on /dev/sda5.  Priority:1 extents:1 across:1044184k
>Adding 1052216k swap on /dev/sdb5.  Priority:1 extents:1 across:1052216k
>Adding 1052184k swap on /dev/sdc5.  Priority:1 extents:1 across:1052184k
>Marking TSC unstable due to: cpufreq changes.
>Time: acpi_pm clocksource has been installed.
>Clocksource tsc unstable (delta = -272640269 ns)
>sky2 eth0: enabling interface
>sky2 eth0: ram buffer 48K
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>
>===========================================================================================================
>
>dmidecode
>
># dmidecode 2.7
>SMBIOS 2.3 present.
>78 structures occupying 2683 bytes.
>Table at 0x000F06E0.
>
>Handle 0x0000, DMI type 0, 24 bytes.
>BIOS Information
>	Vendor: American Megatrends Inc.
>	Version: 1303   
>	Release Date: 07/13/2006
>	Address: 0xF0000
>	Runtime Size: 64 kB
>	ROM Size: 1024 kB
>	Characteristics:
>		ISA is supported
>		PCI is supported
>		PNP is supported
>		APM is supported
>		BIOS is upgradeable
>		BIOS shadowing is allowed
>		ESCD support is available
>		Boot from CD is supported
>		Selectable boot is supported
>		BIOS ROM is socketed
>		EDD is supported
>		5.25"/1.2 MB floppy services are supported (int 13h)
>		3.5"/720 KB floppy services are supported (int 13h)
>		3.5"/2.88 MB floppy services are supported (int 13h)
>		Print screen service is supported (int 5h)
>		8042 keyboard services are supported (int 9h)
>		Serial services are supported (int 14h)
>		Printer services are supported (int 17h)
>		CGA/mono video services are supported (int 10h)
>		ACPI is supported
>		USB legacy is supported
>		LS-120 boot is supported
>		ATAPI Zip drive boot is supported
>		BIOS boot specification is supported
>	BIOS Revision: 8.12
>
>Handle 0x0001, DMI type 1, 27 bytes.
>System Information
>	Manufacturer: System manufacturer
>	Product Name: System Product Name
>	Version: System Version
>	Serial Number: System Serial Number
>	UUID: 70780F8B-74FE-D511-91D9-94C2001887A4
>	Wake-up Type: Power Switch
>	SKU Number: To Be Filled By O.E.M.
>	Family: To Be Filled By O.E.M.
>
>Handle 0x0002, DMI type 2, 15 bytes.
>Base Board Information
>	Manufacturer: ASUSTeK Computer INC.
>	Product Name: A8N32-SLI-Deluxe
>	Version: Rev 1.xx
>	Serial Number: MB-1234567890
>	Asset Tag: To Be Filled By O.E.M.
>	Features:
>		Board is a hosting board
>		Board is replaceable
>	Location In Chassis: To Be Filled By O.E.M.
>	Chassis Handle: 0x0003
>	Type: Motherboard
>	Contained Object Handles: 0
>
>Handle 0x0003, DMI type 3, 21 bytes.
>Chassis Information
>	Manufacturer: Chassis Manufacture
>	Type: Desktop
>	Lock: Not Present
>	Version: Chassis Version
>	Serial Number: Chassis Serial Number
>	Asset Tag: Asset-1234567890
>	Boot-up State: Safe
>	Power Supply State: Safe
>	Thermal State: Safe
>	Security Status: None
>	OEM Information: 0x00000001
>	Heigth: Unspecified
>	Number Of Power Cords: 1
>	Contained Elements: 0
>
>Handle 0x0004, DMI type 4, 35 bytes.
>Processor Information
>	Socket Designation: SOCKET 939
>	Type: Central Processor
>	Family: Athlon 64
>	Manufacturer: AMD              
>	ID: F2 0F 02 00 FF FB 8B 07
>	Signature: Extended Family 0, Extended Model 2, Stepping 2
>	Flags:
>		FPU (Floating-point unit on-chip)
>		VME (Virtual mode extension)
>		DE (Debugging extension)
>		PSE (Page size extension)
>		TSC (Time stamp counter)
>		MSR (Model specific registers)
>		PAE (Physical address extension)
>		MCE (Machine check exception)
>		CX8 (CMPXCHG8 instruction supported)
>		APIC (On-chip APIC hardware supported)
>		SEP (Fast system call)
>		MTRR (Memory type range registers)
>		PGE (Page global enable)
>		MCA (Machine check architecture)
>		CMOV (Conditional move instruction supported)
>		PAT (Page attribute table)
>		PSE-36 (36-bit page size extension)
>		CLFSH (CLFLUSH instruction supported)
>		MMX (MMX technology supported)
>		FXSR (Fast floating-point save and restore)
>		SSE (Streaming SIMD extensions)
>		SSE2 (Streaming SIMD extensions 2)
>	Version: AMD Athlon(tm) 64 Processor 3500+                   
>	Voltage: 1.4 V
>	External Clock: 200 MHz
>	Max Speed: 2200 MHz
>	Current Speed: 2200 MHz
>	Status: Populated, Enabled
>	Upgrade: <OUT OF SPEC>
>	L1 Cache Handle: 0x0005
>	L2 Cache Handle: 0x0006
>	L3 Cache Handle: 0x0007
>	Serial Number: To Be Filled By O.E.M.
>	Asset Tag: To Be Filled By O.E.M.
>	Part Number: To Be Filled By O.E.M.
>
>Handle 0x0005, DMI type 7, 19 bytes.
>Cache Information
>	Socket Designation: L1-Cache
>	Configuration: Enabled, Not Socketed, Level 1
>	Operational Mode: Varies With Memory Address
>	Location: Internal
>	Installed Size: 64 KB
>	Maximum Size: 64 KB
>	Supported SRAM Types:
>		Pipeline Burst
>	Installed SRAM Type: Pipeline Burst
>	Speed: Unknown
>	Error Correction Type: Single-bit ECC
>	System Type: Data
>	Associativity: 4-way Set-associative
>
>Handle 0x0006, DMI type 7, 19 bytes.
>Cache Information
>	Socket Designation: L2-Cache
>	Configuration: Enabled, Not Socketed, Level 2
>	Operational Mode: Varies With Memory Address
>	Location: Internal
>	Installed Size: 512 KB
>	Maximum Size: 512 KB
>	Supported SRAM Types:
>		Pipeline Burst
>	Installed SRAM Type: Pipeline Burst
>	Speed: Unknown
>	Error Correction Type: Single-bit ECC
>	System Type: Unified
>	Associativity: 4-way Set-associative
>
>Handle 0x0007, DMI type 7, 19 bytes.
>Cache Information
>	Socket Designation: L3-Cache
>	Configuration: Disabled, Not Socketed, Level 3
>	Operational Mode: Unknown
>	Location: Internal
>	Installed Size: 0 KB
>	Maximum Size: 0 KB
>	Supported SRAM Types:
>		Unknown
>	Installed SRAM Type: Unknown
>	Speed: Unknown
>	Error Correction Type: Unknown
>	System Type: Unknown
>	Associativity: Unknown
>
>Handle 0x0008, DMI type 4, 35 bytes.
>Processor Information
>	Socket Designation: SOCKET 939
>	Type: Central Processor
>	Family: Other
>	Manufacturer:                  
>	ID: 00 00 00 00 00 00 00 00
>	Version:                                                     
>	Voltage: 3.3 V 2.9 V
>	External Clock: Unknown
>	Max Speed: 2000 MHz
>	Current Speed: Unknown
>	Status: Unpopulated
>	Upgrade: <OUT OF SPEC>
>	L1 Cache Handle: 0x0009
>	L2 Cache Handle: 0x000A
>	L3 Cache Handle: 0x000B
>	Serial Number: To Be Filled By O.E.M.
>	Asset Tag: To Be Filled By O.E.M.
>	Part Number: To Be Filled By O.E.M.
>
>Handle 0x0009, DMI type 7, 19 bytes.
>Cache Information
>	Socket Designation: L1-Cache
>	Configuration: Disabled, Not Socketed, Level 1
>	Operational Mode: Unknown
>	Location: Internal
>	Installed Size: 0 KB
>	Maximum Size: 0 KB
>	Supported SRAM Types:
>		Unknown
>	Installed SRAM Type: Unknown
>	Speed: Unknown
>	Error Correction Type: Unknown
>	System Type: Unknown
>	Associativity: Unknown
>
>Handle 0x000A, DMI type 7, 19 bytes.
>Cache Information
>	Socket Designation: L2-Cache
>	Configuration: Disabled, Not Socketed, Level 2
>	Operational Mode: Unknown
>	Location: Internal
>	Installed Size: 0 KB
>	Maximum Size: 0 KB
>	Supported SRAM Types:
>		Unknown
>	Installed SRAM Type: Unknown
>	Speed: Unknown
>	Error Correction Type: Unknown
>	System Type: Unknown
>	Associativity: Unknown
>
>Handle 0x000B, DMI type 7, 19 bytes.
>Cache Information
>	Socket Designation: L3-Cache
>	Configuration: Disabled, Not Socketed, Level 3
>	Operational Mode: Unknown
>	Location: Internal
>	Installed Size: 0 KB
>	Maximum Size: 0 KB
>	Supported SRAM Types:
>		Unknown
>	Installed SRAM Type: Unknown
>	Speed: Unknown
>	Error Correction Type: Unknown
>	System Type: Unknown
>	Associativity: Unknown
>
>Handle 0x000C, DMI type 5, 24 bytes.
>Memory Controller Information
>	Error Detecting Method: 64-bit ECC
>	Error Correcting Capabilities:
>		None
>	Supported Interleave: One-way Interleave
>	Current Interleave: One-way Interleave
>	Maximum Memory Module Size: 4096 MB
>	Maximum Total Memory Size: 16384 MB
>	Supported Speeds:
>		70 ns
>		60 ns
>		50 ns
>	Supported Memory Types:
>		DIMM
>		SDRAM
>	Memory Module Voltage: 3.3 V
>	Associated Memory Slots: 4
>		0x000D
>		0x000E
>		0x000F
>		0x0010
>	Enabled Error Correcting Capabilities:
>		None
>
>Handle 0x000D, DMI type 6, 12 bytes.
>Memory Module Information
>	Socket Designation: DIMM0
>	Bank Connections: 0 5
>	Current Speed: 160 ns
>	Type: DIMM
>	Installed Size: 512 MB (Double-bank Connection)
>	Enabled Size: 512 MB (Double-bank Connection)
>	Error Status: OK
>
>Handle 0x000E, DMI type 6, 12 bytes.
>Memory Module Information
>	Socket Designation: DIMM1
>	Bank Connections: 0 5
>	Current Speed: 162 ns
>	Type: DIMM
>	Installed Size: 512 MB (Double-bank Connection)
>	Enabled Size: 512 MB (Double-bank Connection)
>	Error Status: OK
>
>Handle 0x000F, DMI type 6, 12 bytes.
>Memory Module Information
>	Socket Designation: DIMM2
>	Bank Connections: 1
>	Current Speed: Unknown
>	Type: Unknown
>	Installed Size: Not Installed
>	Enabled Size: Not Installed
>	Error Status: OK
>
>Handle 0x0010, DMI type 6, 12 bytes.
>Memory Module Information
>	Socket Designation: DIMM3
>	Bank Connections: 1
>	Current Speed: Unknown
>	Type: Unknown
>	Installed Size: Not Installed
>	Enabled Size: Not Installed
>	Error Status: OK
>
>Handle 0x0011, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: PS2Mouse
>	Internal Connector Type: None
>	External Reference Designator: PS2Mouse
>	External Connector Type: PS/2
>	Port Type: Mouse Port
>
>Handle 0x0012, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: Keyboard
>	Internal Connector Type: None
>	External Reference Designator: Keyboard
>	External Connector Type: PS/2
>	Port Type: Keyboard Port
>
>Handle 0x0013, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: USB1
>	Internal Connector Type: None
>	External Reference Designator: USB1
>	External Connector Type: Access Bus (USB)
>	Port Type: USB
>
>Handle 0x0014, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: USB2
>	Internal Connector Type: None
>	External Reference Designator: USB2
>	External Connector Type: Access Bus (USB)
>	Port Type: USB
>
>Handle 0x0015, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: USB3
>	Internal Connector Type: None
>	External Reference Designator: USB3
>	External Connector Type: Access Bus (USB)
>	Port Type: USB
>
>Handle 0x0016, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: USB4
>	Internal Connector Type: None
>	External Reference Designator: USB4
>	External Connector Type: Access Bus (USB)
>	Port Type: USB
>
>Handle 0x0017, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: LPT 1
>	Internal Connector Type: None
>	External Reference Designator: LPT 1
>	External Connector Type: DB-25 male
>	Port Type: Parallel Port ECP/EPP
>
>Handle 0x0018, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: COM A
>	Internal Connector Type: None
>	External Reference Designator: COM A
>	External Connector Type: DB-9 male
>	Port Type: Serial Port 16550A Compatible
>
>Handle 0x0019, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: Audio Mic In
>	Internal Connector Type: None
>	External Reference Designator: Audio Mic In
>	External Connector Type: Mini Jack (headphones)
>	Port Type: Audio Port
>
>Handle 0x001A, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: Audio Line In
>	Internal Connector Type: None
>	External Reference Designator: Audio Line In
>	External Connector Type: Mini Jack (headphones)
>	Port Type: Audio Port
>
>Handle 0x001B, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: Audio Line Out
>	Internal Connector Type: None
>	External Reference Designator: Audio Line Out
>	External Connector Type: Mini Jack (headphones)
>	Port Type: Audio Port
>
>Handle 0x001C, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: LAN
>	Internal Connector Type: None
>	External Reference Designator: LAN
>	External Connector Type: RJ-45
>	Port Type: Network Port
>
>Handle 0x001D, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: LAN
>	Internal Connector Type: None
>	External Reference Designator: LAN
>	External Connector Type: RJ-45
>	Port Type: Network Port
>
>Handle 0x001E, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: AUX IN
>	Internal Connector Type: On Board Sound Input From CD-ROM
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Audio Port
>
>Handle 0x001F, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: CDIN
>	Internal Connector Type: On Board Sound Input From CD-ROM
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Audio Port
>
>Handle 0x0020, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: PRI IDE
>	Internal Connector Type: On Board IDE
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Other
>
>Handle 0x0021, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: SEC IDE
>	Internal Connector Type: On Board IDE
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Other
>
>Handle 0x0022, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: FLOPPY
>	Internal Connector Type: On Board Floppy
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Other
>
>Handle 0x0023, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: FRONT PNL
>	Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Other
>
>Handle 0x0024, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: CPU FAN
>	Internal Connector Type: Other
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Other
>
>Handle 0x0025, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: NB FAN
>	Internal Connector Type: Other
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Other
>
>Handle 0x0026, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: SB FAN
>	Internal Connector Type: Other
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Other
>
>Handle 0x0027, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: CHASSIS1 FAN
>	Internal Connector Type: Other
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Other
>
>Handle 0x0028, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: CHASSIS2 FAN
>	Internal Connector Type: Other
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Other
>
>Handle 0x0029, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: POWER FAN
>	Internal Connector Type: Other
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Other
>
>Handle 0x002A, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: EZ-PLUG
>	Internal Connector Type: Other
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Other
>
>Handle 0x002B, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: FNT USB
>	Internal Connector Type: Other
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Other
>
>Handle 0x002C, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: FP AUD
>	Internal Connector Type: Other
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Other
>
>Handle 0x002D, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: MAIN POWER
>	Internal Connector Type: Other
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Other
>
>Handle 0x002E, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: SATA1
>	Internal Connector Type: On Board IDE
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Other
>
>Handle 0x002F, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: SATA2
>	Internal Connector Type: On Board IDE
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Other
>
>Handle 0x0030, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: SATA3
>	Internal Connector Type: On Board IDE
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Other
>
>Handle 0x0031, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: SATA4
>	Internal Connector Type: On Board IDE
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Other
>
>Handle 0x0032, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: I1394_1
>	Internal Connector Type: IEEE 1394
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Firewire (IEEE P1394)
>
>Handle 0x0033, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: I1394_2
>	Internal Connector Type: IEEE 1394
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: Firewire (IEEE P1394)
>
>Handle 0x0034, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: USB5
>	Internal Connector Type: Access Bus (USB)
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: USB
>
>Handle 0x0035, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: USB6
>	Internal Connector Type: Access Bus (USB)
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: PCMCIA Type I
>
>Handle 0x0036, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: USB7
>	Internal Connector Type: Access Bus (USB)
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: USB
>
>Handle 0x0037, DMI type 8, 9 bytes.
>Port Connector Information
>	Internal Reference Designator: USB8
>	Internal Connector Type: Access Bus (USB)
>	External Reference Designator: Not Specified
>	External Connector Type: None
>	Port Type: PCMCIA Type I
>
>Handle 0x0038, DMI type 9, 13 bytes.
>System Slot Information
>	Designation: PCIEX1_16
>	Type: 32-bit PCI Express
>	Current Usage: In Use
>	Length: Short
>	Characteristics:
>		3.3 V is provided
>		Opening is shared
>		PME signal is supported
>
>Handle 0x0039, DMI type 9, 13 bytes.
>System Slot Information
>	Designation: PCIEX2_16
>	Type: 32-bit PCI Express
>	Current Usage: Available
>	Length: Short
>	Characteristics:
>		3.3 V is provided
>		Opening is shared
>		PME signal is supported
>
>Handle 0x003A, DMI type 9, 13 bytes.
>System Slot Information
>	Designation: PCIEX3_4
>	Type: 32-bit PCI Express
>	Current Usage: Available
>	Length: Short
>	Characteristics:
>		3.3 V is provided
>		Opening is shared
>		PME signal is supported
>
>Handle 0x003B, DMI type 9, 13 bytes.
>System Slot Information
>	Designation: PCI4
>	Type: 32-bit PCI
>	Current Usage: Available
>	Length: Short
>	ID: 3
>	Characteristics:
>		3.3 V is provided
>		Opening is shared
>		PME signal is supported
>
>Handle 0x003C, DMI type 9, 13 bytes.
>System Slot Information
>	Designation: PCI5
>	Type: 32-bit PCI
>	Current Usage: Available
>	Length: Short
>	ID: 4
>	Characteristics:
>		3.3 V is provided
>		Opening is shared
>		PME signal is supported
>
>Handle 0x003D, DMI type 9, 13 bytes.
>System Slot Information
>	Designation: PCI6
>	Type: 32-bit PCI
>	Current Usage: In Use
>	Length: Short
>	ID: 5
>	Characteristics:
>		3.3 V is provided
>		Opening is shared
>		PME signal is supported
>
>Handle 0x003E, DMI type 10, 6 bytes.
>On Board Device Information
>	Type: Video
>	Status: Enabled
>	Description:   To Be Filled By O.E.M.
>
>Handle 0x003F, DMI type 11, 5 bytes.
>OEM Strings
>	String 1: 001BFC4A8820
>	String 2: To Be Filled By O.E.M.
>	String 3: To Be Filled By O.E.M.
>	String 4: To Be Filled By O.E.M.
>
>Handle 0x0040, DMI type 13, 22 bytes.
>BIOS Language Information
>	Installable Languages: 1
>		en|US|iso8859-1
>	Currently Installed Language: en|US|iso8859-1
>
>Handle 0x0041, DMI type 15, 35 bytes.
>System Event Log
>	Area Length: 4 bytes
>	Header Start Offset: 0x0000
>	Header Length: 2 bytes
>	Data Start Offset: 0x0002
>	Access Method: Indexed I/O, one 16-bit index port, one 8-bit data port
>	Access Address: Index 0x046A, Data 0x046C
>	Status: Invalid, Not Full
>	Change Token: 0x00000000
>	Header Format: No Header
>	Supported Log Type Descriptors: 6
>	Descriptor 1: End of log
>	Data Format 1: OEM-specific
>	Descriptor 2: End of log
>	Data Format 2: OEM-specific
>	Descriptor 3: End of log
>	Data Format 3: OEM-specific
>	Descriptor 4: End of log
>	Data Format 4: OEM-specific
>	Descriptor 5: End of log
>	Data Format 5: OEM-specific
>	Descriptor 6: End of log
>	Data Format 6: OEM-specific
>
>Handle 0x0042, DMI type 16, 15 bytes.
>Physical Memory Array
>	Location: System Board Or Motherboard
>	Use: System Memory
>	Error Correction Type: None
>	Maximum Capacity: 8 GB
>	Error Information Handle: Not Provided
>	Number Of Devices: 4
>
>Handle 0x0043, DMI type 19, 15 bytes.
>Memory Array Mapped Address
>	Starting Address: 0x00000000000
>	Ending Address: 0x0003FFFFFFF
>	Range Size: 1 GB
>	Physical Array Handle: 0x0042
>	Partition Width: 0
>
>Handle 0x0044, DMI type 17, 27 bytes.
>Memory Device
>	Array Handle: 0x0042
>	Error Information Handle: Not Provided
>	Total Width: 64 bits
>	Data Width: 72 bits
>	Size: 512 MB
>	Form Factor: DIMM
>	Set: None
>	Locator: DIMM0
>	Bank Locator: BANK0
>	Type: DDR
>	Type Detail: Synchronous
>	Speed: 400 MHz (2.5 ns)
>	Manufacturer: Manufacturer0
>	Serial Number: SerNum0
>	Asset Tag: AssetTagNum0
>	Part Number: PartNum0
>
>Handle 0x0045, DMI type 20, 19 bytes.
>Memory Device Mapped Address
>	Starting Address: 0x00000000000
>	Ending Address: 0x0001FFFFFFF
>	Range Size: 512 MB
>	Physical Device Handle: 0x0044
>	Memory Array Mapped Address Handle: 0x0043
>	Partition Row Position: 1
>
>Handle 0x0046, DMI type 17, 27 bytes.
>Memory Device
>	Array Handle: 0x0042
>	Error Information Handle: Not Provided
>	Total Width: 64 bits
>	Data Width: 72 bits
>	Size: 512 MB
>	Form Factor: DIMM
>	Set: None
>	Locator: DIMM1
>	Bank Locator: BANK1
>	Type: DDR
>	Type Detail: Synchronous
>	Speed: 400 MHz (2.5 ns)
>	Manufacturer: Manufacturer1
>	Serial Number: SerNum1
>	Asset Tag: AssetTagNum1
>	Part Number: PartNum1
>
>Handle 0x0047, DMI type 20, 19 bytes.
>Memory Device Mapped Address
>	Starting Address: 0x00020000000
>	Ending Address: 0x0003FFFFFFF
>	Range Size: 512 MB
>	Physical Device Handle: 0x0046
>	Memory Array Mapped Address Handle: 0x0043
>	Partition Row Position: 1
>
>Handle 0x0048, DMI type 17, 27 bytes.
>Memory Device
>	Array Handle: 0x0042
>	Error Information Handle: Not Provided
>	Total Width: Unknown
>	Data Width: Unknown
>	Size: No Module Installed
>	Form Factor: DIMM
>	Set: None
>	Locator: DIMM2
>	Bank Locator: BANK2
>	Type: Unknown
>	Type Detail: Unknown
>	Speed: Unknown
>	Manufacturer: Manufacturer2
>	Serial Number: SerNum2
>	Asset Tag: AssetTagNum2
>	Part Number: PartNum2
>
>Handle 0x0049, DMI type 126, 19 bytes.
>Inactive
>
>Handle 0x004A, DMI type 17, 27 bytes.
>Memory Device
>	Array Handle: 0x0042
>	Error Information Handle: Not Provided
>	Total Width: Unknown
>	Data Width: Unknown
>	Size: No Module Installed
>	Form Factor: DIMM
>	Set: None
>	Locator: DIMM3
>	Bank Locator: BANK3
>	Type: Unknown
>	Type Detail: Unknown
>	Speed: Unknown
>	Manufacturer: Manufacturer3
>	Serial Number: SerNum3
>	Asset Tag: AssetTagNum3
>	Part Number: PartNum3
>
>Handle 0x004B, DMI type 126, 19 bytes.
>Inactive
>
>Handle 0x004C, DMI type 32, 20 bytes.
>System Boot Information
>	Status: No errors detected
>
>Handle 0x004D, DMI type 127, 4 bytes.
>End Of Table
>

Actions: View

Attachments on bug 242956: 203171 | 203501 | 203511 | 203521 | 260881 | 260891 | 260901 | 262671 | 262681 | 262691