Attachment 203231 Details for Bug 198071 – output of dmesg.txt

output of dmesg.txt

dmesg.txt (text/plain), 10.59 KB, created by Matěj Cepl on 2007-09-22 21:35:17 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Matěj Cepl

Created: 2007-09-22 21:35:17 UTC

Size: 10.59 KB

patch

obsolete

>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 19
>ssb: Sonics Silicon Backplane found on PCI device 0000:02:03.0
>b43-phy4: Broadcom 4318 WLAN found
>b43-phy4 debug: Found PHY: Analog 3, Type 2, Revision 7
>b43-phy4 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
>b43-phy4 debug: Radio turned off
>wmaster0: Selected rate control algorithm 'simple'
>b43-phy4 debug: Adding Interface type 2
>b43-phy4 ERROR: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>b43-phy4 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4)
>b43-phy4 debug: Adding Interface type 2
>b43-phy4 ERROR: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>b43-phy4 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4)
>b43-phy4 debug: Adding Interface type 2
>b43-phy4 ERROR: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>b43-phy4 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4)
>b43-phy4 debug: Adding Interface type 2
>b43-phy4 ERROR: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>b43-phy4 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4)
>b43-phy4 debug: Adding Interface type 2
>b43-phy4 ERROR: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>b43-phy4 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4)
>b43-phy4 debug: Adding Interface type 2
>b43-phy4 ERROR: Microcode "bcm43xx_microcode5.fw" not available or load failed.
>b43-phy4 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4)
>ACPI: PCI interrupt for device 0000:02:03.0 disabled
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 19
>ssb: Sonics Silicon Backplane found on PCI device 0000:02:03.0
>b43-phy5: Broadcom 4318 WLAN found
>b43-phy5 debug: Found PHY: Analog 3, Type 2, Revision 7
>b43-phy5 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
>b43-phy5 debug: Radio turned off
>wmaster0: Selected rate control algorithm 'simple'
>b43-phy5 debug: Adding Interface type 2
>b43-phy5 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
>b43-phy5 debug: Radio turned on
>b43-phy5 debug: Radio enabled by hardware
>b43-phy5 debug: Chip initialized
>b43-phy5 debug: 32-bit DMA initialized
>b43-phy5 debug: Wireless interface started
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>b43-phy5 debug: Using hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>b43-phy5 debug: Disabling hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>b43-phy5 debug: Removing Interface type 2
>b43-phy5 debug: Wireless interface stopped
>b43-phy5 debug: DMA-32 0x0200 (RX) max used slots: 1/64
>b43-phy5 debug: DMA-32 0x02A0 (TX) max used slots: 0/128
>b43-phy5 debug: DMA-32 0x0280 (TX) max used slots: 0/128
>b43-phy5 debug: DMA-32 0x0260 (TX) max used slots: 0/128
>b43-phy5 debug: DMA-32 0x0240 (TX) max used slots: 0/128
>b43-phy5 debug: DMA-32 0x0220 (TX) max used slots: 2/128
>b43-phy5 debug: DMA-32 0x0200 (TX) max used slots: 0/128
>b43-phy5 debug: Radio turned off
>b43-phy5 debug: Radio turned off
>ACPI: PCI interrupt for device 0000:02:03.0 disabled
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>bcm43xx driver
>ieee80211_crypt: unregistered algorithm 'NULL'
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 19
>ssb: Sonics Silicon Backplane found on PCI device 0000:02:03.0
>b43-phy6: Broadcom 4318 WLAN found
>b43-phy6 debug: Found PHY: Analog 3, Type 2, Revision 7
>b43-phy6 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
>b43-phy6 debug: Radio turned off
>wmaster0: Selected rate control algorithm 'simple'
>b43-phy6 debug: Adding Interface type 2
>b43-phy6 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
>b43-phy6 debug: Radio turned on
>b43-phy6 debug: Radio enabled by hardware
>b43-phy6 debug: Chip initialized
>b43-phy6 debug: 32-bit DMA initialized
>b43-phy6 debug: Wireless interface started
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>b43-phy6 debug: Using hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>b43-phy6 debug: Disabling hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>b43-phy6 debug: Removing Interface type 2
>b43-phy6 debug: Wireless interface stopped
>b43-phy6 debug: DMA-32 0x0200 (RX) max used slots: 1/64
>b43-phy6 debug: DMA-32 0x02A0 (TX) max used slots: 0/128
>b43-phy6 debug: DMA-32 0x0280 (TX) max used slots: 0/128
>b43-phy6 debug: DMA-32 0x0260 (TX) max used slots: 0/128
>b43-phy6 debug: DMA-32 0x0240 (TX) max used slots: 0/128
>b43-phy6 debug: DMA-32 0x0220 (TX) max used slots: 2/128
>b43-phy6 debug: DMA-32 0x0200 (TX) max used slots: 0/128
>b43-phy6 debug: Radio turned off
>b43-phy6 debug: Radio turned off
>ACPI: PCI interrupt for device 0000:02:03.0 disabled
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 19
>ssb: Sonics Silicon Backplane found on PCI device 0000:02:03.0
>b43-phy7: Broadcom 4318 WLAN found
>b43-phy7 debug: Found PHY: Analog 3, Type 2, Revision 7
>b43-phy7 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
>b43-phy7 debug: Radio turned off
>wmaster0: Selected rate control algorithm 'simple'
>b43-phy7 debug: Adding Interface type 2
>b43-phy7 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
>b43-phy7 debug: Radio turned on
>b43-phy7 debug: Radio enabled by hardware
>b43-phy7 debug: Chip initialized
>b43-phy7 debug: 32-bit DMA initialized
>b43-phy7 debug: Wireless interface started
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>b43-phy7 debug: Removing Interface type 2
>b43-phy7 debug: Wireless interface stopped
>b43-phy7 debug: DMA-32 0x0200 (RX) max used slots: 0/64
>b43-phy7 debug: DMA-32 0x02A0 (TX) max used slots: 0/128
>b43-phy7 debug: DMA-32 0x0280 (TX) max used slots: 0/128
>b43-phy7 debug: DMA-32 0x0260 (TX) max used slots: 0/128
>b43-phy7 debug: DMA-32 0x0240 (TX) max used slots: 0/128
>b43-phy7 debug: DMA-32 0x0220 (TX) max used slots: 2/128
>b43-phy7 debug: DMA-32 0x0200 (TX) max used slots: 0/128
>b43-phy7 debug: Radio turned off
>b43-phy7 debug: Radio turned off
>b43-phy7 debug: Adding Interface type 2
>b43-phy7 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
>b43-phy7 debug: Radio turned on
>b43-phy7 debug: Radio enabled by hardware
>b43-phy7 debug: Chip initialized
>b43-phy7 debug: 32-bit DMA initialized
>b43-phy7 debug: Wireless interface started
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>b43-phy7 debug: Using hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>eth1: Initial auth_alg=0
>eth1: authenticate with AP 00:19:5b:22:28:44
>eth1: authenticate with AP 00:19:5b:22:28:44
>eth1: authenticate with AP 00:19:5b:22:28:44
>eth1: RX authentication from 00:19:5b:22:28:44 (alg=0 transaction=2 status=0)
>eth1: authenticated
>eth1: associate with AP 00:19:5b:22:28:44
>eth1: authentication frame received from 00:19:5b:22:28:44, but not in authenticate state - ignored
>eth1: authentication frame received from 00:19:5b:22:28:44, but not in authenticate state - ignored
>eth1: authentication frame received from 00:19:5b:22:28:44, but not in authenticate state - ignored
>eth1: authentication frame received from 00:19:5b:22:28:44, but not in authenticate state - ignored
>eth1: associate with AP 00:19:5b:22:28:44
>eth1: associate with AP 00:19:5b:22:28:44
>eth1: association with AP 00:19:5b:22:28:44 timed out
>b43-phy7 debug: Disabling hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>eth1: privacy configuration mismatch and mixed-cell disabled - disassociate
>b43-phy7 debug: Using hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>eth1: Initial auth_alg=0
>eth1: authenticate with AP 00:19:5b:22:28:44
>eth1: authenticate with AP 00:19:5b:22:28:44
>eth1: authenticate with AP 00:19:5b:22:28:44
>eth1: authentication with AP 00:19:5b:22:28:44 timed out
>b43-phy7 debug: Disabling hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>eth1: privacy configuration mismatch and mixed-cell disabled - disassociate
>b43-phy7 debug: Using hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>eth1: Initial auth_alg=0
>eth1: authenticate with AP 00:19:5b:22:28:44
>eth1: authenticate with AP 00:19:5b:22:28:44
>eth1: authenticate with AP 00:19:5b:22:28:44
>eth1: authentication with AP 00:19:5b:22:28:44 timed out
>b43-phy7 debug: Disabling hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>b43-phy7 debug: Removing Interface type 2
>b43-phy7 debug: Wireless interface stopped
>b43-phy7 debug: DMA-32 0x0200 (RX) max used slots: 1/64
>b43-phy7 debug: DMA-32 0x02A0 (TX) max used slots: 0/128
>b43-phy7 debug: DMA-32 0x0280 (TX) max used slots: 0/128
>b43-phy7 debug: DMA-32 0x0260 (TX) max used slots: 0/128
>b43-phy7 debug: DMA-32 0x0240 (TX) max used slots: 0/128
>b43-phy7 debug: DMA-32 0x0220 (TX) max used slots: 4/128
>b43-phy7 debug: DMA-32 0x0200 (TX) max used slots: 0/128
>b43-phy7 debug: Radio turned off
>b43-phy7 debug: Radio turned off
>b43-phy7 debug: Adding Interface type 2
>b43-phy7 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
>b43-phy7 debug: Radio turned on
>b43-phy7 debug: Radio enabled by hardware
>b43-phy7 debug: Chip initialized
>b43-phy7 debug: 32-bit DMA initialized
>b43-phy7 debug: Wireless interface started
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>usb 5-2: new high speed USB device using ehci_hcd and address 3
>usb 5-2: configuration #1 chosen from 1 choice
>scsi3 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 3:0:0:0: Direct-Access     USB2.0   USB Flash Disk   0.00 PQ: 0 ANSI: 2
>sd 3:0:0:0: [sdb] 256000 512-byte hardware sectors (131 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00
>sd 3:0:0:0: [sdb] Assuming drive cache: write through
>sd 3:0:0:0: [sdb] 256000 512-byte hardware sectors (131 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00
>sd 3:0:0:0: [sdb] Assuming drive cache: write through
> sdb:
>sd 3:0:0:0: [sdb] Attached SCSI removable disk
>sd 3:0:0:0: Attached scsi generic sg2 type 0
>SELinux: initialized (dev sdb, type vfat), uses genfs_contexts

Actions: View

Attachments on bug 198071: 132120 | 147843 | 147844 | 150958 | 150960 | 155899 | 203231 | 203241