Attachment 203391 Details for Bug 250177 – output of 'lspci -vv'

output of 'lspci -vv'

lspciverbose.txt (text/plain), 13.35 KB, created by Eero Nevalainen on 2007-09-23 09:34:15 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Eero Nevalainen

Created: 2007-09-23 09:34:15 UTC

Size: 13.35 KB

patch

obsolete

>00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1)
>        Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
>        Capabilities: [44] HyperTransport: Slave or Primary Interface
>                Command: BaseUnitID=0 UnitCnt=14 MastHost- DefDir- DUL-
>                Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>                Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>                Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>                Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
>                Revision ID: 1.03
>                Link Frequency 0: 800MHz
>                Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
>                Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>                Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
>                Link Frequency 1: 200MHz
>                Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
>                Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>                Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>                Prefetchable memory behind bridge Upper: 00-00
>                Bus Number: 00
>        Capabilities: [c0] AGP version 3.0
>                Status: RQ=32 Iso- ArqSz=2 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
>                Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=x4
>
>00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2)
>        Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>
>00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1)
>        Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Interrupt: pin A routed to IRQ 0
>        Region 0: I/O ports at 5080 [size=32]
>        Region 4: I/O ports at 5000 [size=64]
>        Region 5: I/O ports at 5040 [size=64]
>        Capabilities: [44] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) (prog-if 10 [OHCI])
>        Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0 (750ns min, 250ns max)
>        Interrupt: pin A routed to IRQ 22
>        Region 0: Memory at ff6fd000 (32-bit, non-prefetchable) [size=4K]
>        Capabilities: [44] Power Management version 2
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1) (prog-if 10 [OHCI])
>        Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0 (750ns min, 250ns max)
>        Interrupt: pin B routed to IRQ 21
>        Region 0: Memory at ff6fe000 (32-bit, non-prefetchable) [size=4K]
>        Capabilities: [44] Power Management version 2
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI])
>        Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0 (750ns min, 250ns max)
>        Interrupt: pin C routed to IRQ 20
>        Region 0: Memory at ff6ffc00 (32-bit, non-prefetchable) [size=256]
>        Capabilities: [44] Debug port
>        Capabilities: [80] Power Management version 2
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev a2)
>        Subsystem: ASUSTeK Computer Inc. Unknown device 80a7
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0 (250ns min, 5000ns max)
>        Interrupt: pin A routed to IRQ 21
>        Region 0: Memory at ff6fc000 (32-bit, non-prefetchable) [size=4K]
>        Region 1: I/O ports at ec00 [size=8]
>        Capabilities: [44] Power Management version 2
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>                Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
>
>00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97 Audio Controller (rev a1)
>        Subsystem: ASUSTeK Computer Inc. Unknown device 812a
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0 (500ns min, 1250ns max)
>        Interrupt: pin A routed to IRQ 20
>        Region 0: I/O ports at e800 [size=256]
>        Region 1: I/O ports at e400 [size=128]
>        Region 2: Memory at ff6fb000 (32-bit, non-prefetchable) [size=4K]
>        Capabilities: [44] Power Management version 2
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5) (rev a2) (prog-if 8a [Master SecP PriP])
>        Subsystem: Unknown device f043:813f
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0 (750ns min, 250ns max)
>        Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
>        Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
>        Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
>        Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
>        Region 4: I/O ports at ffa0 [size=16]
>        Capabilities: [44] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:0a.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller (v2.5) (rev a2) (prog-if 85 [Master SecO PriO])
>        Subsystem: ASUSTeK Computer Inc. Unknown device 813f
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0 (750ns min, 250ns max)
>        Interrupt: pin A routed to IRQ 22
>        Region 0: I/O ports at 09f0 [size=8]
>        Region 1: I/O ports at 0bf0 [size=4]
>        Region 2: I/O ports at 0970 [size=8]
>        Region 3: I/O ports at 0b70 [size=4]
>        Region 4: I/O ports at c800 [size=16]
>        Region 5: I/O ports at c400 [size=128]
>        Capabilities: [44] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 16
>        Bus: primary=00, secondary=01, subordinate=01, sec-latency=10
>        I/O behind bridge: 0000b000-0000bfff
>        Memory behind bridge: ff500000-ff5fffff
>        Prefetchable memory behind bridge: ceb00000-eeafffff
>        Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>        BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>
>00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Bus: primary=00, secondary=02, subordinate=02, sec-latency=128
>        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>
>00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
>        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Capabilities: [80] HyperTransport: Host or Secondary Interface
>                !!! Possibly incomplete decoding
>                Command: WarmRst+ DblEnd-
>                Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
>                Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
>                Revision ID: 1.02
>
>00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
>        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
>        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
>        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>01:00.0 VGA compatible controller: ATI Technologies Inc R420 JJ [Radeon X800SE] (prog-if 00 [VGA])
>        Subsystem: PC Partner Limited Unknown device 2610
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 64 (2000ns min), Cache Line Size: 32 bytes
>        Interrupt: pin A routed to IRQ 19
>        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
>        Region 1: I/O ports at b800 [size=256]
>        Region 2: Memory at ff5f0000 (32-bit, non-prefetchable) [size=64K]
>        Expansion ROM at ff5c0000 [disabled] [size=128K]
>        Capabilities: [58] AGP version 3.0
>                Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
>                Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
>        Capabilities: [50] Power Management version 2
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>01:00.1 Display controller: ATI Technologies Inc R420 [Radeon X800] (Secondary)
>        Subsystem: PC Partner Limited Unknown device 2611
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 64 (2000ns min), Cache Line Size: 32 bytes
>        Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
>        Region 1: Memory at ff5e0000 (32-bit, non-prefetchable) [size=64K]
>        Capabilities: [50] Power Management version 2
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>

Actions: View

Attachments on bug 250177: 160274 | 160628 | 203391 | 203401