Attachment 205521 Details for Bug 293641 – dmesg output

dmesg output

dmesg_20070925.txt (text/plain), 40.01 KB, created by Iftequar F Mohammed on 2007-09-25 14:25:51 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Iftequar F Mohammed

Created: 2007-09-25 14:25:51 UTC

Size: 40.01 KB

patch

obsolete

>Bootdata ok (command line is ro root=LABEL=/ apm=off nousb apm=off iommu=off)
>Linux version 2.6.9-42.0.8.ELsmp (brewbuilder@ls20-bc1-14.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Tue Jan 23 12:49:51 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000dfeda540 (usable)
> BIOS-e820: 00000000dfeda540 - 00000000dfeeb144 (ACPI data)
> BIOS-e820: 00000000dfeeb144 - 00000000e0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 000000041ffff000 (usable)
>ACPI: RSDP (v002 HP                                    ) @ 0x00000000000f4f30
>ACPI: XSDT (v001 HP     ProLiant 0x00000002 Ò 0x0000162e) @ 0x00000000dfeda900
>ACPI: FADT (v003 HP     ProLiant 0x00000002 Ò 0x0000162e) @ 0x00000000dfeda980
>ACPI: SPCR (v001 HP     SPCRRBSU 0x00000001 Ò 0x0000162e) @ 0x00000000dfeda680
>ACPI: SRAT (v001 HP     HOT ADD  0x00000001  0x00000000) @ 0x00000000dfeda700
>ACPI: MCFG (v001 HP     ProLiant 0x00000001  0x00000000) @ 0x00000000dfeda780
>ACPI: MADT (v001 HP     00000083 0x00000002  0x00000000) @ 0x00000000dfeda7c0
>ACPI: SSDT (v001 HP         SSDT 0x00000001 INTL 0x20030228) @ 0x00000000dfedfa80
>ACPI: SSDT (v001 HP        SSDTP 0x00000001 INTL 0x20030228) @ 0x00000000dfee2540
>ACPI: DSDT (v001 HP         DSDT 0x00000001 INTL 0x20030228) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000041ffff000
>Bootmem setup node 0 0000000000000000-000000041ffff000
>No mptable found.
>On node 0 totalpages: 4325375
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 4321279 pages, LIFO batch:16
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.3 present.
>ACPI: PM-Timer IO Port: 0x908
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 16
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
>Processor #6 15:4 APIC version 16
>ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
>Processor #14 15:4 APIC version 16
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
>Processor #8 15:4 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 16
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>Processor #7 15:4 APIC version 16
>ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
>Processor #15 15:4 APIC version 16
>ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
>Processor #9 15:4 APIC version 16
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
>Setting APIC routing to flat
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x02] address[0xfec80000] gsi_base[24])
>IOAPIC[1]: apic_id 2, version 32, address 0xfec80000, GSI 24-47
>ACPI: IOAPIC (id[0x03] address[0xfec80800] gsi_base[48])
>IOAPIC[2]: apic_id 3, version 32, address 0xfec80800, GSI 48-71
>ACPI: IOAPIC (id[0x06] address[0xfec83000] gsi_base[72])
>IOAPIC[3]: apic_id 6, version 32, address 0xfec83000, GSI 72-95
>ACPI: IOAPIC (id[0x07] address[0xfec83800] gsi_base[96])
>IOAPIC[4]: apic_id 7, version 32, address 0xfec83800, GSI 96-119
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
>Checking aperture...
>Built 1 zonelists
>Kernel command line: ro root=LABEL=/ apm=off nousb apm=off iommu=off console=tty0
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 3.579545 MHz PM timer.
>time.c: Detected 3000.393 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
>Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>Placing software IO TLB between 0x4101000 - 0x8101000
>Memory: 16417132k/17301500k available (2106k kernel code, 0k reserved, 1299k data, 196k init)
>Calibrating delay using timer specific routine.. 6008.19 BogoMIPS (lpj=3004098)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: L3 cache: 8192K
>using mwait in idle threads.
>CPU0: Initial APIC ID: 0, Physical Processor ID: 0
>Using IO APIC NMI watchdog
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: L3 cache: 8192K
>CPU0: Initial APIC ID: 0, Physical Processor ID: 0
>CPU0:                Intel(R) Xeon(TM) MP CPU 3.00GHz stepping 01
>per-CPU timeslice cutoff: 1034.59 usecs.
>task migration cache decay timeout: 2 msecs.
>Booting processor 1/6 rip 6000 rsp 100dfe85f58
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5999.48 BogoMIPS (lpj=2999743)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: L3 cache: 8192K
>CPU1: Initial APIC ID: 6, Physical Processor ID: 3
>               Intel(R) Xeon(TM) MP CPU 3.00GHz stepping 01
>Booting processor 2/14 rip 6000 rsp 100dfebdf58
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 5999.53 BogoMIPS (lpj=2999767)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: L3 cache: 8192K
>CPU2: Initial APIC ID: 14, Physical Processor ID: 7
>               Intel(R) Xeon(TM) MP CPU 3.00GHz stepping 01
>Booting processor 3/8 rip 6000 rsp 10037eb3f58
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 5999.85 BogoMIPS (lpj=2999927)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: L3 cache: 8192K
>CPU3: Initial APIC ID: 8, Physical Processor ID: 4
>               Intel(R) Xeon(TM) MP CPU 3.00GHz stepping 01
>Booting processor 4/1 rip 6000 rsp 10411829f58
>Initializing CPU#4
>Calibrating delay using timer specific routine.. 5999.50 BogoMIPS (lpj=2999752)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: L3 cache: 8192K
>CPU4: Initial APIC ID: 1, Physical Processor ID: 0
>               Intel(R) Xeon(TM) MP CPU 3.00GHz stepping 01
>Booting processor 5/7 rip 6000 rsp 10411861f58
>Initializing CPU#5
>Calibrating delay using timer specific routine.. 5999.67 BogoMIPS (lpj=2999836)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: L3 cache: 8192K
>CPU5: Initial APIC ID: 7, Physical Processor ID: 3
>               Intel(R) Xeon(TM) MP CPU 3.00GHz stepping 01
>Booting processor 6/15 rip 6000 rsp 100dfe17f58
>Initializing CPU#6
>Calibrating delay using timer specific routine.. 5999.47 BogoMIPS (lpj=2999739)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: L3 cache: 8192K
>CPU6: Initial APIC ID: 15, Physical Processor ID: 7
>               Intel(R) Xeon(TM) MP CPU 3.00GHz stepping 01
>Booting processor 7/9 rip 6000 rsp 100dfe4df58
>Initializing CPU#7
>Calibrating delay using timer specific routine.. 6000.09 BogoMIPS (lpj=3000047)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: L3 cache: 8192K
>CPU7: Initial APIC ID: 9, Physical Processor ID: 4
>               Intel(R) Xeon(TM) MP CPU 3.00GHz stepping 01
>Total of 8 processors activated (48005.81 BogoMIPS).
>activating NMI Watchdog ... done.
>testing NMI watchdog ... OK.
>Using local APIC timer interrupts.
>Detected 10.417 MHz APIC timer.
>checking TSC synchronization across 8 CPUs: passed.
>Brought up 8 CPUs
>time.c: Using PIT/TSC based timekeeping.
>checking if image is initramfs... it is
>NET: Registered protocol family 16
>PCI: Using configuration type 1
>PCI: Using MMCONFIG at e0000000
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040816
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTD0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTD0.PXH0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTD0.PXH2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTB0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTB0.PX20._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTB0.PX22._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0.PX30._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0.PX32._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 *10 11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 10 11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *7 10 11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 *10 11)
>usbcore: USB support disabled
>PCI: Using ACPI for IRQ routing
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
>GSI 18 sharing vector 0xB9 and IRQ 18
>ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
>ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
>GSI 19 sharing vector 0xC1 and IRQ 19
>ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
>ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI
>GSI 20 sharing vector 0xC9 and IRQ 20
>ACPI: PCI interrupt 0000:03:01.0[A] -> GSI 24 (level, low) -> IRQ 201
>GSI 21 sharing vector 0xD1 and IRQ 21
>ACPI: PCI interrupt 0000:03:01.1[B] -> GSI 25 (level, low) -> IRQ 209
>GSI 22 sharing vector 0xD9 and IRQ 22
>ACPI: PCI interrupt 0000:04:01.0[A] -> GSI 48 (level, low) -> IRQ 217
>GSI 23 sharing vector 0xE1 and IRQ 23
>ACPI: PCI interrupt 0000:16:01.0[A] -> GSI 17 (level, low) -> IRQ 225
>ACPI: PCI interrupt 0000:16:01.1[B] -> GSI 18 (level, low) -> IRQ 185
>ACPI: PCI interrupt 0000:16:02.0[A] -> GSI 18 (level, low) -> IRQ 185
>ACPI: PCI interrupt 0000:16:02.1[B] -> GSI 19 (level, low) -> IRQ 177
>GSI 24 sharing vector 0xE9 and IRQ 24
>ACPI: PCI interrupt 0000:0c:01.0[A] -> GSI 74 (level, low) -> IRQ 233
>GSI 25 sharing vector 0x32 and IRQ 25
>ACPI: PCI interrupt 0000:0f:01.0[A] -> GSI 99 (level, low) -> IRQ 50
>GSI 26 sharing vector 0x3A and IRQ 26
>ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 21 (level, low) -> IRQ 58
>GSI 27 sharing vector 0x42 and IRQ 27
>ACPI: PCI interrupt 0000:01:02.2[B] -> GSI 22 (level, low) -> IRQ 66
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1190067285.632:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 730303D1F4DFC62E
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports C1)
>ACPI: Processor [CPU1] (supports C1)
>ACPI: Processor [CPU6] (supports C1)
>ACPI: Processor [CPU7] (supports C1)
>ACPI: Processor [CPU8] (supports C1)
>ACPI: Processor [CPU9] (supports C1)
>ACPI: Processor [CPUE] (supports C1)
>ACPI: Processor [CPUF] (supports C1)
>ACPI: Thermal Zone [THM0] (8 C)
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.100 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH5: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI
>ICH5: chipset revision 2
>ICH5: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x0508-0x050f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: DVD-ROM DW-224E-R, ATAPI CD/DVD-ROM drive
>Using cfq io scheduler
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>Probing IDE interface ide2...
>Probing IDE interface ide3...
>Probing IDE interface ide4...
>Probing IDE interface ide5...
>hda: ATAPI 24X DVD-ROM drive, 1654kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ide-floppy driver 0.99.newide
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard on isa0060/serio0
>Losing some ticks... checking if CPU frequency changed.
>input: PS/2 Generic Mouse on isa0060/serio1
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 262144 bind 262144)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>cpufreq: CPU0 - ACPI performance management activated.
>cpufreq: *P0: 3001 MHz, 115000 mW, 100 uS
>cpufreq:  P1: 2668 MHz, 100922 mW, 100 uS
>cpufreq:  P2: 2334 MHz, 88016 mW, 100 uS
>cpufreq: CPU1 - ACPI performance management activated.
>cpufreq: *P0: 3001 MHz, 115000 mW, 100 uS
>cpufreq:  P1: 2668 MHz, 100922 mW, 100 uS
>cpufreq:  P2: 2334 MHz, 88016 mW, 100 uS
>cpufreq: CPU2 - ACPI performance management activated.
>cpufreq: *P0: 3001 MHz, 115000 mW, 100 uS
>cpufreq:  P1: 2668 MHz, 100922 mW, 100 uS
>cpufreq:  P2: 2334 MHz, 88016 mW, 100 uS
>cpufreq: CPU3 - ACPI performance management activated.
>cpufreq: *P0: 3001 MHz, 115000 mW, 100 uS
>cpufreq:  P1: 2668 MHz, 100922 mW, 100 uS
>cpufreq:  P2: 2334 MHz, 88016 mW, 100 uS
>cpufreq: CPU4 - ACPI performance management activated.
>cpufreq: *P0: 3001 MHz, 115000 mW, 100 uS
>cpufreq:  P1: 2668 MHz, 100922 mW, 100 uS
>cpufreq:  P2: 2334 MHz, 88016 mW, 100 uS
>cpufreq: CPU5 - ACPI performance management activated.
>cpufreq: *P0: 3001 MHz, 115000 mW, 100 uS
>cpufreq:  P1: 2668 MHz, 100922 mW, 100 uS
>cpufreq:  P2: 2334 MHz, 88016 mW, 100 uS
>cpufreq: CPU6 - ACPI performance management activated.
>cpufreq: *P0: 3001 MHz, 115000 mW, 100 uS
>cpufreq:  P1: 2668 MHz, 100922 mW, 100 uS
>cpufreq:  P2: 2334 MHz, 88016 mW, 100 uS
>cpufreq: CPU7 - ACPI performance management activated.
>cpufreq: *P0: 3001 MHz, 115000 mW, 100 uS
>cpufreq:  P1: 2668 MHz, 100922 mW, 100 uS
>cpufreq:  P2: 2334 MHz, 88016 mW, 100 uS
>ACPI: (supports S0 S4 S5)
>ACPI wakeup devices: 
>
>Freeing unused kernel memory: 196k freed
>SCSI subsystem initialized
>HP CISS Driver (v 2.6.10.RH1)
>cciss: Device 0x46 has been found at bus 4 dev 1 func 0
>ACPI: PCI interrupt 0000:04:01.0[A] -> GSI 48 (level, low) -> IRQ 217
>cciss: using DAC cycles
>      blocks= 286734240 block_size= 512
>      heads= 255, sectors= 32, cylinders= 35139
>
>      blocks= 286734240 block_size= 512
>      heads= 255, sectors= 32, cylinders= 35139
>
>      blocks= 286734240 block_size= 512
>      heads= 255, sectors= 32, cylinders= 35139
>
> cciss/c0d0: p1 p2 p3 p4 < p5 p6 p7 >
>      blocks= 286734240 block_size= 512
>      heads= 255, sectors= 32, cylinders= 35139
>
> cciss/c0d1: p1
>QLogic Fibre Channel HBA Driver
>ACPI: PCI interrupt 0000:0c:01.0[A] -> GSI 74 (level, low) -> IRQ 233
>qla2300 0000:0c:01.0: Found an ISP2312, irq 233, iobase 0xffffff0000032000
>qla2300 0000:0c:01.0: Configuring PCI space...
>qla2300 0000:0c:01.0: Configure NVRAM parameters...
>qla2300 0000:0c:01.0: Verifying loaded RISC code...
>qla2300 0000:0c:01.0: Waiting for LIP to complete...
>qla2300 0000:0c:01.0: LIP reset occured (f700).
>qla2300 0000:0c:01.0: LOOP UP detected (2 Gbps).
>qla2300 0000:0c:01.0: Topology - (F_Port), Host Loop address 0xffff
>scsi0 : qla2xxx
>qla2300 0000:0c:01.0: 
> QLogic Fibre Channel HBA Driver: 8.01.01
>  QLogic QLA2340 - 
>  ISP2312: PCI-X (133 MHz) @ 0000:0c:01.0 hdma+, host#=0, fw=3.03.15 IPX
>  Vendor: 3PARdata  Model: VV                Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:0c:01.0: scsi(0:0:0:0): Enabled tagged queuing, queue depth 32.
>SCSI device sda: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sda: drive cache: write back
> sda: sda1
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>  Vendor: 3PARdata  Model: VV                Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:0c:01.0: scsi(0:0:0:1): Enabled tagged queuing, queue depth 32.
>SCSI device sdb: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdb: drive cache: write back
> sdb: sdb1
>Attached scsi disk sdb at scsi0, channel 0, id 0, lun 1
>  Vendor: 3PARdata  Model: VV                Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:0c:01.0: scsi(0:0:0:2): Enabled tagged queuing, queue depth 32.
>SCSI device sdc: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdc: drive cache: write back
>SCSI device sdc: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdc: drive cache: write back
> sdc: sdc1
>Attached scsi disk sdc at scsi0, channel 0, id 0, lun 2
>  Vendor: 3PARdata  Model: VV                Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:0c:01.0: scsi(0:0:0:3): Enabled tagged queuing, queue depth 32.
>SCSI device sdd: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdd: drive cache: write back
>SCSI device sdd: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdd: drive cache: write back
> sdd: sdd1
>Attached scsi disk sdd at scsi0, channel 0, id 0, lun 3
>  Vendor: 3PARdata  Model: VV                Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:0c:01.0: scsi(0:0:0:4): Enabled tagged queuing, queue depth 32.
>SCSI device sde: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sde: drive cache: write back
>SCSI device sde: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sde: drive cache: write back
> sde: sde1
>Attached scsi disk sde at scsi0, channel 0, id 0, lun 4
>  Vendor: 3PARdata  Model: VV                Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:0c:01.0: scsi(0:0:0:5): Enabled tagged queuing, queue depth 32.
>SCSI device sdf: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdf: drive cache: write back
>SCSI device sdf: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdf: drive cache: write back
> sdf: sdf1
>Attached scsi disk sdf at scsi0, channel 0, id 0, lun 5
>  Vendor: 3PARdata  Model: VV                Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:0c:01.0: scsi(0:0:0:6): Enabled tagged queuing, queue depth 32.
>SCSI device sdg: 536870912 512-byte hdwr sectors (274878 MB)
>SCSI device sdg: drive cache: write back
>SCSI device sdg: 536870912 512-byte hdwr sectors (274878 MB)
>SCSI device sdg: drive cache: write back
> sdg: sdg1
>Attached scsi disk sdg at scsi0, channel 0, id 0, lun 6
>  Vendor: 3PARdata  Model: VV                Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:0c:01.0: scsi(0:0:0:7): Enabled tagged queuing, queue depth 32.
>SCSI device sdh: 536870912 512-byte hdwr sectors (274878 MB)
>SCSI device sdh: drive cache: write back
>SCSI device sdh: 536870912 512-byte hdwr sectors (274878 MB)
>SCSI device sdh: drive cache: write back
> sdh: sdh1
>Attached scsi disk sdh at scsi0, channel 0, id 0, lun 7
>  Vendor: 3PARdata  Model: VV                Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:0c:01.0: scsi(0:0:0:8): Enabled tagged queuing, queue depth 32.
>SCSI device sdi: 1073741824 512-byte hdwr sectors (549756 MB)
>SCSI device sdi: drive cache: write back
>SCSI device sdi: 1073741824 512-byte hdwr sectors (549756 MB)
>SCSI device sdi: drive cache: write back
> sdi: sdi1
>Attached scsi disk sdi at scsi0, channel 0, id 0, lun 8
>ACPI: PCI interrupt 0000:0f:01.0[A] -> GSI 99 (level, low) -> IRQ 50
>qla2300 0000:0f:01.0: Found an ISP2312, irq 50, iobase 0xffffff0000034000
>qla2300 0000:0f:01.0: Configuring PCI space...
>qla2300 0000:0f:01.0: Configure NVRAM parameters...
>qla2300 0000:0f:01.0: Verifying loaded RISC code...
>qla2300 0000:0f:01.0: Waiting for LIP to complete...
>qla2300 0000:0f:01.0: LIP reset occured (f700).
>qla2300 0000:0f:01.0: LIP occured (f700).
>qla2300 0000:0f:01.0: LIP reset occured (f7f7).
>qla2300 0000:0f:01.0: LOOP UP detected (2 Gbps).
>qla2300 0000:0f:01.0: Topology - (F_Port), Host Loop address 0xffff
>scsi1 : qla2xxx
>qla2300 0000:0f:01.0: 
> QLogic Fibre Channel HBA Driver: 8.01.01
>  QLogic QLA2340 - 
>  ISP2312: PCI-X (133 MHz) @ 0000:0f:01.0 hdma+, host#=1, fw=3.03.15 IPX
>  Vendor: 3PARdata  Model: VV                Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:0f:01.0: scsi(1:0:0:0): Enabled tagged queuing, queue depth 32.
>SCSI device sdj: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdj: drive cache: write back
>SCSI device sdj: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdj: drive cache: write back
> sdj: sdj1
>Attached scsi disk sdj at scsi1, channel 0, id 0, lun 0
>  Vendor: 3PARdata  Model: VV                Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:0f:01.0: scsi(1:0:0:1): Enabled tagged queuing, queue depth 32.
>SCSI device sdk: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdk: drive cache: write back
>SCSI device sdk: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdk: drive cache: write back
> sdk: sdk1
>Attached scsi disk sdk at scsi1, channel 0, id 0, lun 1
>  Vendor: 3PARdata  Model: VV                Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:0f:01.0: scsi(1:0:0:2): Enabled tagged queuing, queue depth 32.
>SCSI device sdl: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdl: drive cache: write back
>SCSI device sdl: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdl: drive cache: write back
> sdl: sdl1
>Attached scsi disk sdl at scsi1, channel 0, id 0, lun 2
>  Vendor: 3PARdata  Model: VV                Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:0f:01.0: scsi(1:0:0:3): Enabled tagged queuing, queue depth 32.
>SCSI device sdm: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdm: drive cache: write back
>SCSI device sdm: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdm: drive cache: write back
> sdm: sdm1
>Attached scsi disk sdm at scsi1, channel 0, id 0, lun 3
>  Vendor: 3PARdata  Model: VV                Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:0f:01.0: scsi(1:0:0:4): Enabled tagged queuing, queue depth 32.
>SCSI device sdn: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdn: drive cache: write back
>SCSI device sdn: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdn: drive cache: write back
> sdn: sdn1
>Attached scsi disk sdn at scsi1, channel 0, id 0, lun 4
>  Vendor: 3PARdata  Model: VV                Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:0f:01.0: scsi(1:0:0:5): Enabled tagged queuing, queue depth 32.
>SCSI device sdo: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdo: drive cache: write back
>SCSI device sdo: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdo: drive cache: write back
> sdo: sdo1
>Attached scsi disk sdo at scsi1, channel 0, id 0, lun 5
>  Vendor: 3PARdata  Model: VV                Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:0f:01.0: scsi(1:0:0:6): Enabled tagged queuing, queue depth 32.
>SCSI device sdp: 536870912 512-byte hdwr sectors (274878 MB)
>SCSI device sdp: drive cache: write back
>SCSI device sdp: 536870912 512-byte hdwr sectors (274878 MB)
>SCSI device sdp: drive cache: write back
> sdp: sdp1
>Attached scsi disk sdp at scsi1, channel 0, id 0, lun 6
>  Vendor: 3PARdata  Model: VV                Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:0f:01.0: scsi(1:0:0:7): Enabled tagged queuing, queue depth 32.
>SCSI device sdq: 536870912 512-byte hdwr sectors (274878 MB)
>SCSI device sdq: drive cache: write back
>SCSI device sdq: 536870912 512-byte hdwr sectors (274878 MB)
>SCSI device sdq: drive cache: write back
> sdq: sdq1
>Attached scsi disk sdq at scsi1, channel 0, id 0, lun 7
>  Vendor: 3PARdata  Model: VV                Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>qla2300 0000:0f:01.0: scsi(1:0:0:8): Enabled tagged queuing, queue depth 32.
>SCSI device sdr: 1073741824 512-byte hdwr sectors (549756 MB)
>SCSI device sdr: drive cache: write back
>SCSI device sdr: 1073741824 512-byte hdwr sectors (549756 MB)
>SCSI device sdr: drive cache: write back
> sdr: sdr1
>Attached scsi disk sdr at scsi1, channel 0, id 0, lun 8
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>inserting floppy driver for 2.6.9-42.0.8.ELsmp
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>bonding: Unknown parameter `-o'
>Ethernet Channel Bonding Driver: v2.6.3 (June 8, 2005)
>bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
>divert: allocating divert_blk for bond0
>Ethernet Channel Bonding Driver: v2.6.3 (June 8, 2005)
>bonding: MII link monitoring set to 100 ms
>divert: allocating divert_blk for bond1
>Intel(R) PRO/1000 Network Driver - version 7.0.38d-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI interrupt 0000:16:01.0[A] -> GSI 17 (level, low) -> IRQ 225
>e1000: 0000:16:01.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:11:0a:5f:ce:ce
>divert: allocating divert_blk for eth0
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI interrupt 0000:16:01.1[B] -> GSI 18 (level, low) -> IRQ 185
>e1000: 0000:16:01.1: e1000_probe: (PCI-X:100MHz:64-bit) 00:11:0a:5f:ce:cf
>divert: allocating divert_blk for eth1
>e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI interrupt 0000:16:02.0[A] -> GSI 18 (level, low) -> IRQ 185
>e1000: 0000:16:02.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:11:0a:62:29:ac
>divert: allocating divert_blk for eth2
>e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI interrupt 0000:16:02.1[B] -> GSI 19 (level, low) -> IRQ 177
>e1000: 0000:16:02.1: e1000_probe: (PCI-X:100MHz:64-bit) 00:11:0a:62:29:ad
>divert: allocating divert_blk for eth3
>e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
>tg3.c:v3.58c (May 19, 2006)
>ACPI: PCI interrupt 0000:03:01.0[A] -> GSI 24 (level, low) -> IRQ 201
>divert: allocating divert_blk for eth4
>eth4: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:16:35:81:0f:e7
>eth4: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0] 
>eth4: dma_rwctrl[769f4000] dma_mask[64-bit]
>ACPI: PCI interrupt 0000:03:01.1[B] -> GSI 25 (level, low) -> IRQ 209
>divert: allocating divert_blk for eth5
>eth5: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000BaseT Ethernet 00:16:35:81:0f:e6
>eth5: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth5: dma_rwctrl[769f4000] dma_mask[64-bit]
>hw_random hardware driver 1.0.0 loaded
>USB Universal Host Controller Interface driver v2.2
>USB Universal Host Controller Interface driver v2.2
>USB Universal Host Controller Interface driver v2.2
>USB Universal Host Controller Interface driver v2.2
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>ACPI: Power Button (FF) [PWRF]
>EXT3 FS on cciss/c0d0p3, internal journal
>device-mapper: dm-multipath version 1.0.4 loaded
>device-mapper: dm-round-robin version 1.0.0 loaded
>cdrom: open failed.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on cciss/c0d0p1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on cciss/c0d0p7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on cciss/c0d0p6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on cciss/c0d0p5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on cciss/c0d1p1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 18876364k swap on /dev/cciss/c0d0p2.  Priority:-1 extents:1
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: CPU0 already at revision 0x16 (current=0x16)
>microcode: CPU1 already at revision 0x16 (current=0x16)
>microcode: CPU2 already at revision 0x16 (current=0x16)
>microcode: CPU3 already at revision 0x16 (current=0x16)
>microcode: CPU4 already at revision 0x16 (current=0x16)
>microcode: CPU5 already at revision 0x16 (current=0x16)
>microcode: CPU6 already at revision 0x16 (current=0x16)
>microcode: CPU7 already at revision 0x16 (current=0x16)
>microcode: No new microdata for cpu 5
>microcode: No new microdata for cpu 4
>microcode: No new microdata for cpu 6
>microcode: No new microdata for cpu 2
>microcode: No new microdata for cpu 7
>microcode: No new microdata for cpu 3
>microcode: No new microdata for cpu 1
>microcode: No new microdata for cpu 0
>IA-32 Microcode Update Driver v1.14 unregistered
>Linux Kernel Card Services
>  options:  [pci] [cardbus] [pm]
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
>bonding: bond0: enslaving eth0 as an active interface with an up link.
>e1000: eth2: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
>bonding: bond0: enslaving eth2 as an active interface with an up link.
>ip_tables: (C) 2000-2002 Netfilter core team
>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
>e1000: eth2: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
>e1000: eth1: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
>bonding: bond1: making interface eth1 the new active one.
>bonding: bond1: enslaving eth1 as an active interface with an up link.
>bonding: bond1: link status definitely down for interface eth1, disabling it
>bonding: bond1: now running without any active interface !
>e1000: eth3: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
>bonding: bond1: making interface eth3 the new active one.
>bonding: bond1: enslaving eth3 as an active interface with an up link.
>bonding: bond1: link status definitely down for interface eth3, disabling it
>bonding: bond1: now running without any active interface !
>e1000: eth1: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
>bonding: bond1: link status definitely up for interface eth1.
>bonding: bond1: making interface eth1 the new active one.
>e1000: eth3: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
>bonding: bond1: link status definitely up for interface eth3.
>i2c /dev entries driver
>ASM: oracleasmfs mounted with options: <defaults>
>ASM:	maxinstances=0
>SCSI device sda: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sda: drive cache: write back
> sda: sda1
>SCSI device sdb: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdb: drive cache: write back
> sdb: sdb1
>SCSI device sdc: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdc: drive cache: write back
> sdc: sdc1
>SCSI device sdd: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdd: drive cache: write back
> sdd: sdd1
>SCSI device sde: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sde: drive cache: write back
> sde: sde1
>SCSI device sdf: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdf: drive cache: write back
> sdf: sdf1
>SCSI device sdg: 536870912 512-byte hdwr sectors (274878 MB)
>SCSI device sdg: drive cache: write back
> sdg: sdg1
>SCSI device sdh: 536870912 512-byte hdwr sectors (274878 MB)
>SCSI device sdh: drive cache: write back
> sdh: sdh1
>SCSI device sdi: 1073741824 512-byte hdwr sectors (549756 MB)
>SCSI device sdi: drive cache: write back
> sdi: sdi1
>SCSI device sdj: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdj: drive cache: write back
> sdj: sdj1
>SCSI device sdk: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdk: drive cache: write back
> sdk: sdk1
>SCSI device sdl: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdl: drive cache: write back
> sdl: sdl1
>SCSI device sdm: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdm: drive cache: write back
> sdm: sdm1
>SCSI device sdn: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdn: drive cache: write back
> sdn: sdn1
>SCSI device sdo: 2097152 512-byte hdwr sectors (1074 MB)
>SCSI device sdo: drive cache: write back
> sdo: sdo1
>SCSI device sdp: 536870912 512-byte hdwr sectors (274878 MB)
>SCSI device sdp: drive cache: write back
> sdp: sdp1
>SCSI device sdq: 536870912 512-byte hdwr sectors (274878 MB)
>SCSI device sdq: drive cache: write back
> sdq: sdq1
>SCSI device sdr: 1073741824 512-byte hdwr sectors (549756 MB)
>SCSI device sdr: drive cache: write back
> sdr: sdr1
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device ffffffff80405ac0(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divert_blk for non-ethernet device sit0
>bond0: duplicate address detected!
>bond0: duplicate address detected!
>bond1: duplicate address detected!
>eth1: no IPv6 routers present
>eth0: no IPv6 routers present
>eth2: no IPv6 routers present
>eth3: no IPv6 routers present
>Fusion MPT base driver 3.02.62.01rh
>Copyright (c) 1999-2005 LSI Logic Corporation
>Fusion MPT misc device (ioctl) driver 3.02.62.01rh
>mptctl: Registered with Fusion MPT base driver
>mptctl: /dev/mptctl @ (major,minor=10,220)
>cpqci: module license 'Proprietary' taints kernel.
>ACPI: PCI interrupt 0000:01:02.2[B] -> GSI 22 (level, low) -> IRQ 66
>warning: many lost ticks.
>Your time source seems to be instable or some driver is hogging interupts
>rip __do_softirq+0x4d/0xd0
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
>Attached scsi generic sg1 at scsi0, channel 0, id 0, lun 1,  type 0
>Attached scsi generic sg2 at scsi0, channel 0, id 0, lun 2,  type 0
>Attached scsi generic sg3 at scsi0, channel 0, id 0, lun 3,  type 0
>Attached scsi generic sg4 at scsi0, channel 0, id 0, lun 4,  type 0
>Attached scsi generic sg5 at scsi0, channel 0, id 0, lun 5,  type 0
>Attached scsi generic sg6 at scsi0, channel 0, id 0, lun 6,  type 0
>Attached scsi generic sg7 at scsi0, channel 0, id 0, lun 7,  type 0
>Attached scsi generic sg8 at scsi0, channel 0, id 0, lun 8,  type 0
>Attached scsi generic sg9 at scsi1, channel 0, id 0, lun 0,  type 0
>Attached scsi generic sg10 at scsi1, channel 0, id 0, lun 1,  type 0
>Attached scsi generic sg11 at scsi1, channel 0, id 0, lun 2,  type 0
>Attached scsi generic sg12 at scsi1, channel 0, id 0, lun 3,  type 0
>Attached scsi generic sg13 at scsi1, channel 0, id 0, lun 4,  type 0
>Attached scsi generic sg14 at scsi1, channel 0, id 0, lun 5,  type 0
>Attached scsi generic sg15 at scsi1, channel 0, id 0, lun 6,  type 0
>Attached scsi generic sg16 at scsi1, channel 0, id 0, lun 7,  type 0
>Attached scsi generic sg17 at scsi1, channel 0, id 0, lun 8,  type 0
>Hangcheck: starting hangcheck timer 0.9.0 (tick is 30 seconds, margin is 180 seconds).
>Hangcheck: Using monotonic_clock().
>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
>All bugs added by David S. Miller <davem@redhat.com>
>martian source 10.102.176.50 from 10.102.176.50, on dev bond0
>ll header: ff:ff:ff:ff:ff:ff:00:11:0a:5f:ce:ce:08:06
>martian source 10.102.176.50 from 10.102.176.50, on dev bond0
>ll header: ff:ff:ff:ff:ff:ff:00:11:0a:5f:ce:ce:08:06
>martian source 10.102.176.50 from 10.102.176.50, on dev bond0
>ll header: ff:ff:ff:ff:ff:ff:00:11:0a:5f:ce:ce:08:06
>SysRq : Show Memory
>Mem-info:
>Node 0 DMA per-cpu:
>cpu 0 hot: low 2, high 6, batch 1
>cpu 0 cold: low 0, high 2, batch 1
>cpu 1 hot: low 2, high 6, batch 1
>cpu 1 cold: low 0, high 2, batch 1
>cpu 2 hot: low 2, high 6, batch 1
>cpu 2 cold: low 0, high 2, batch 1
>cpu 3 hot: low 2, high 6, batch 1
>cpu 3 cold: low 0, high 2, batch 1
>cpu 4 hot: low 2, high 6, batch 1
>cpu 4 cold: low 0, high 2, batch 1
>cpu 5 hot: low 2, high 6, batch 1
>cpu 5 cold: low 0, high 2, batch 1
>cpu 6 hot: low 2, high 6, batch 1
>cpu 6 cold: low 0, high 2, batch 1
>cpu 7 hot: low 2, high 6, batch 1
>cpu 7 cold: low 0, high 2, batch 1
>Node 0 Normal per-cpu:
>cpu 0 hot: low 32, high 96, batch 16
>cpu 0 cold: low 0, high 32, batch 16
>cpu 1 hot: low 32, high 96, batch 16
>cpu 1 cold: low 0, high 32, batch 16
>cpu 2 hot: low 32, high 96, batch 16
>cpu 2 cold: low 0, high 32, batch 16
>cpu 3 hot: low 32, high 96, batch 16
>cpu 3 cold: low 0, high 32, batch 16
>cpu 4 hot: low 32, high 96, batch 16
>cpu 4 cold: low 0, high 32, batch 16
>cpu 5 hot: low 32, high 96, batch 16
>cpu 5 cold: low 0, high 32, batch 16
>cpu 6 hot: low 32, high 96, batch 16
>cpu 6 cold: low 0, high 32, batch 16
>cpu 7 hot: low 32, high 96, batch 16
>cpu 7 cold: low 0, high 32, batch 16
>Node 0 HighMem per-cpu: empty
>
>Free pages:     1803988kB (0kB HighMem)
>Active:2449552 inactive:473179 dirty:679 writeback:0 unstable:0 free:450997 slab:69423 mapped:2353462 pagetables:350183
>Node 0 DMA free:10868kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:16384kB pages_scanned:0 all_unreclaimable? no
>protections[]: 0 0 0
>Node 0 Normal free:1793120kB min:4152kB low:8304kB high:12456kB active:9798208kB inactive:1892716kB present:17285116kB pages_scanned:0 all_unreclaimable? no
>protections[]: 0 0 0
>Node 0 HighMem free:0kB min:128kB low:256kB high:384kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
>protections[]: 0 0 0
>Node 0 DMA: 3*4kB 3*8kB 1*16kB 0*32kB 5*64kB 0*128kB 1*256kB 0*512kB 0*1024kB 1*2048kB 2*4096kB = 10868kB
>Node 0 Normal: 36352*4kB 145986*8kB 27179*16kB 1167*32kB 57*64kB 3*128kB 0*256kB 1*512kB 1*1024kB 1*2048kB 0*4096kB = 1793120kB
>Node 0 HighMem: empty
>Swap cache: add 778498, delete 777528, find 353893/421318, race 0+1
>Free swap:       18554780kB
>4325375 pages of RAM
>221045 reserved pages
>53010723 pages shared
>970 pages swap cached

Actions: View

Attachments on bug 293641: 197701 | 197721 | 197731 | 198811 | 205521