Attachment 206301 Details for Bug 302471 – dmesg output from xen boot

dmesg output from xen boot

dmesg (text/plain), 27.36 KB, created by Adam Greenberg on 2007-09-26 01:06:25 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Adam Greenberg

Created: 2007-09-26 01:06:25 UTC

Size: 27.36 KB

patch

obsolete

>Linux version 2.6.20-2931.fc7xen (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Mon Aug 13 10:12:37 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize bail 0
>copy_e820_map() start: 0000000000000000 size: 0000000272d89000 end: 0000000272d89000 type: 1
> Xen: 0000000000000000 - 0000000272d89000 (usable)
>9301MB HIGHMEM available.
>727MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 2567561) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->   186366
>  Normal     186366 ->   186366
>  HighMem    186366 ->  2567561
>early_node_map[1] active PFN ranges
>    0:        0 ->  2567561
>On node 0 totalpages: 2567561
>  DMA zone: 1455 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 184911 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  HighMem zone: 18603 pages used for memmap
>  HighMem zone: 2362592 pages, LIFO batch:31
>found SMP MP-table at 000fe710
>DMI 2.3 present.
>ACPI: RSDP (v002 DELL                                  ) @ 0x000febf0
>ACPI: XSDT (v001 DELL    B8K     0x0000000d ASL  0x00000061) @ 0x000fce4e
>ACPI: FADT (v003 DELL    B8K     0x0000000d ASL  0x00000061) @ 0x000fcf76
>ACPI: SSDT (v001   DELL    st_ex 0x00001000 INTL 0x20050624) @ 0xfff62a93
>ACPI: MADT (v001 DELL    B8K     0x0000000d ASL  0x00000061) @ 0x000fd06a
>ACPI: BOOT (v001 DELL    B8K     0x0000000d ASL  0x00000061) @ 0x000fd108
>ACPI: ASF! (v016 DELL    B8K     0x0000000d ASL  0x00000061) @ 0x000fd130
>ACPI: MCFG (v001 DELL    B8K     0x0000000d ASL  0x00000061) @ 0x000fd197
>ACPI: HPET (v001 DELL    B8K     0x0000000d ASL  0x00000061) @ 0x000fd1d5
>ACPI: TCPA (v001 DELL    B8K     0x0000000d ASL  0x00000061) @ 0x000fd431
>  >>> ERROR: Invalid checksum
>ACPI: SLIC (v001 DELL    B8K     0x0000000d ASL  0x00000061) @ 0x000fd20d
>ACPI: DSDT (v001   DELL    dt_ex 0x00001000 INTL 0x20050624) @ 0x00000000
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
>IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 2 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Detected 1995.086 MHz processor.
>Built 1 zonelists.  Total pages: 2547503
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet noreboot
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c1364000 soft=c1344000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Xen reported: 1995.044 MHz processor.
>Console: colour VGA+ 80x50
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1064 kB
> per task-struct memory footprint: 1200 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Software IO TLB enabled: 
> Aperture:     64 megabytes
> Kernel range: c771e000 - cb71e000
> Address size: 27 bits
>vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000
>Memory: 10087148k/10270244k available (2046k kernel code, 173956k reserved, 1083k data, 180k init, 9524780k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xf5315000 - 0xf57fe000   (5028 kB)
>    pkmap   : 0xf5000000 - 0xf5200000   (2048 kB)
>    vmalloc : 0xee000000 - 0xf4ffe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xed7fe000   ( 727 MB)
>      .init : 0xc1313000 - 0xc1340000   ( 180 kB)
>      .data : 0xc11ff926 - 0xc130e714   (1083 kB)
>      .text : 0xc1000000 - 0xc11ff926   (2046 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3992.21 BogoMIPS (lpj=7984420)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebd3f1 20000000 00000000 00000000 0004e33d 00000000 00000001
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: After all inits, caps: bfebd3f1 20000000 00000000 00003940 0004e33d 00000000 00000001
>Checking 'hlt' instruction... OK.
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20060707
>CPU 1 irqstacks, hard=c1365000 soft=c1345000
>CPU 2 irqstacks, hard=c1366000 soft=c1346000
>CPU 3 irqstacks, hard=c1367000 soft=c1347000
>ENABLING IO-APIC IRQs
>lockdep: not fixing up alternatives.
>Initializing CPU#1
>Initializing CPU#2
>Brought up 4 CPUs
>sizeof(vma)=88 bytes
>sizeof(page)=32 bytes
>Initializing CPU#3
>sizeof(inode)=564 bytes
>sizeof(dentry)=156 bytes
>sizeof(ext3inode)=800 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=2656 bytes
>migration_cost=15
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>Setting up standard PCI resources
>Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>Boot video device is 0000:07:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.PCI3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.PCI3.PCIF._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.PCI3.PCIG._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.PCI5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI7._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI9._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 10 devices
>xen_mem: Initialising balloon driver.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: ioport range 0x800-0x85f could not be reserved
>pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:01: ioport range 0x860-0x8ff has been reserved
>PCI: Bridge: 0000:02:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:02:01.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:01:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:01:00.3
>  IO window: c000-cfff
>  MEM window: f9d00000-f9efffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:02.0
>  IO window: c000-cfff
>  MEM window: f9d00000-f9ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: f9b00000-f9bfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:04.0
>  IO window: d000-dfff
>  MEM window: fa000000-fcefffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:05.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:07.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: f9a00000-f9afffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: f9c00000-f9cfffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:01.0 to 64
>PCI: Setting latency timer of device 0000:01:00.3 to 64
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 8942k freed
>Simple Boot Flag at 0x7a set to 0x1
>IA-32 Microcode Update Driver: v1.14a-xen <tigran@veritas.com>
>audit: initializing netlink socket (disabled)
>audit(1190768136.772:1): initialized
>highmem bounce pool size: 64 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:07.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>Allocate Port Service[0000:01:00.0:pcie10]
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:02:00.0:pcie20]
>PCI: Setting latency timer of device 0000:02:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:02:01.0:pcie20]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>Real Time Clock Driver v1.12ac
>hpet_acpi_add: no address or irqs in _CRS
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Xen virtual console successfully installed as ttyS0
>Event-channel device installed.
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>Freeing unused kernel memory: 180k freed
>Write protecting the kernel read-only data: 762k
>4gb seg fixup, process init (pid 1), cs:ip 73:003e99bd
>4gb seg fixup, process init (pid 1), cs:ip 73:00fe2a7d
>4gb seg fixup, process init (pid 1), cs:ip 73:003e99bd
>4gb seg fixup, process init (pid 1), cs:ip 73:00fe2a7d
>4gb seg fixup, process init (pid 1), cs:ip 73:003e05c0
>4gb seg fixup, process init (pid 1), cs:ip 73:00457529
>4gb seg fixup, process init (pid 1), cs:ip 73:003e3e8c
>4gb seg fixup, process init (pid 1), cs:ip 73:003e3e9a
>4gb seg fixup, process init (pid 1), cs:ip 73:0043ac62
>4gb seg fixup, process init (pid 1), cs:ip 73:003dcea1
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ff80
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000ff60
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000ff40
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000ff20
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 17, io mem 0xff980800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb 2-2: new full speed USB device using uhci_hcd and address 2
>SCSI subsystem initialized
>Fusion MPT base driver 3.04.03
>Copyright (c) 1999-2007 LSI Logic Corporation
>Fusion MPT SAS Host driver 3.04.03
>ACPI: PCI Interrupt 0000:05:0b.0[A] -> GSI 24 (level, low) -> IRQ 21
>mptbase: Initiating ioc0 bringup
>usb 5-4: new high speed USB device using ehci_hcd and address 2
>usb 5-4: configuration #1 chosen from 1 choice
>hub 5-4:1.0: USB hub found
>hub 5-4:1.0: 4 ports detected
>ioc0: SAS1068: Capabilities={Initiator}
>usb 5-7: new high speed USB device using ehci_hcd and address 3
>usb 5-7: configuration #1 chosen from 1 choice
>libusual: modprobe for usb-storage succeeded, but module is not present
>usb 5-4.3: new low speed USB device using ehci_hcd and address 4
>usb 5-4.3: configuration #1 chosen from 1 choice
>input: Dell Dell USB Keyboard as /class/input/input1
>input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.7-4.3
>usb 5-4.4: new low speed USB device using ehci_hcd and address 5
>usb 5-4.4: configuration #1 chosen from 1 choice
>input: USB Optical Mouse as /class/input/input2
>input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.7-4.4
>scsi0 : ioc0: LSISAS1068, FwRev=000a3100h, Ports=1, MaxQ=286, IRQ=21
>scsi 0:0:0:0: Direct-Access     ATA      ST3250820AS      G    PQ: 0 ANSI: 5
>scsi 0:0:1:0: Direct-Access     ATA      ST3250820AS      G    PQ: 0 ANSI: 5
>scsi 0:1:0:0: Direct-Access     Dell     VIRTUAL DISK     1028 PQ: 0 ANSI: 5
>SCSI device sda: 486326272 512-byte hdwr sectors (248999 MB)
>sda: Write Protect is off
>sda: Mode Sense: 03 00 00 08
>SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 486326272 512-byte hdwr sectors (248999 MB)
>sda: Write Protect is off
>sda: Mode Sense: 03 00 00 08
>SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:1:0:0: Attached scsi disk sda
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.1: version 2.00ac7
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15
>scsi1 : ata_piix
>ata1.00: ATAPI, max UDMA/33
>ata1.00: configured for UDMA/33
>scsi2 : ata_piix
>ata2: port disabled. ignoring.
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GSA-H21N B109 PQ: 0 ANSI: 5
>printk: 17202 messages suppressed.
>4gb seg fixup, process init (pid 1), cs:ip 73:003e3e8c
>ahci 0000:00:1f.2: version 2.0
>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x7 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part 
>ata3: SATA max UDMA/133 cmd 0xEE07C100 ctl 0x0 bmdma 0x0 irq 22
>ata4: SATA max UDMA/133 cmd 0xEE07C180 ctl 0x0 bmdma 0x0 irq 22
>ata5: SATA max UDMA/133 cmd 0xEE07C200 ctl 0x0 bmdma 0x0 irq 22
>ata6: SATA max UDMA/133 cmd 0xEE07C280 ctl 0x0 bmdma 0x0 irq 22
>ata7: SATA max UDMA/133 cmd 0xEE07C300 ctl 0x0 bmdma 0x0 irq 22
>ata8: SATA max UDMA/133 cmd 0xEE07C380 ctl 0x0 bmdma 0x0 irq 22
>scsi3 : ahci
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi4 : ahci
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi5 : ahci
>ata5: SATA link down (SStatus 0 SControl 300)
>scsi6 : ahci
>ata6: SATA link down (SStatus 0 SControl 0)
>scsi7 : ahci
>ata7: SATA link down (SStatus 0 SControl 0)
>scsi8 : ahci
>ata8: SATA link down (SStatus 0 SControl 0)
>printk: 249 messages suppressed.
>4gb seg fixup, process init (pid 1), cs:ip 73:003e3e8c
>Initializing USB Mass Storage driver...
>scsi9 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>scsi 9:0:0:0: CD-ROM            DVDRW    DRW-6S160P       PSG6 PQ: 0 ANSI: 0
>printk: 161 messages suppressed.
>4gb seg fixup, process nash-hotplug (pid 369), cs:ip 73:003e3e8c
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1190768157.149:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1845 types, 82 bools, 1 sens, 1024 cats
>security:  61 classes, 70170 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1190768157.389:3): policy loaded auid=4294967295
>scsi 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 0:0:1:0: Attached scsi generic sg1 type 0
>sd 0:1:0:0: Attached scsi generic sg2 type 0
>scsi 1:0:0:0: Attached scsi generic sg3 type 5
>scsi 9:0:0:0: Attached scsi generic sg4 type 5
>Floppy drive(s): fd0 is 1.44M
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>sr 9:0:0:0: Attached scsi CD-ROM sr1
>intel_rng: Firmware space is locked read-only. If you can't or
>intel_rng: don't want to disable this in firmware setup, and if
>intel_rng: you are certain that your system has a functional
>intel_rng: RNG, try using the 'no_fwh_detect' option.
>input: PC Speaker as /class/input/input3
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 23
>tg3.c:v3.72 (January 8, 2007)
>ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:0b:00.0 to 64
>8250_pnp: Unknown symbol serial8250_unregister_port
>8250_pnp: Unknown symbol serial8250_register_port
>8250_pnp: Unknown symbol serial8250_unregister_port
>8250_pnp: Unknown symbol serial8250_register_port
>eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:19:b9:3b:99:ce
>eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>ACPI: PCI Interrupt 0000:0c:0a.0[A] -> GSI 18 (level, low) -> IRQ 19
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>------------[ cut here ]------------
>kernel BUG at lib/../arch/i386/kernel/swiotlb.c:436!
>invalid opcode: 0000 [#1]
>SMP 
>last sysfs file: /block/sr1/range
>Modules linked in: parport_pc parport snd_timer fw_ohci fw_core tg3 snd i2c_i801 serial_core serio_raw soundcore pcspkr i2c_core snd_page_alloc sr_mod cdrom floppy sg dm_snapshot dm_zero dm_mirror dm_mod usb_storage ahci ata_piix libata mptsas mptscsih mptbase scsi_transport_sas sd_mod scsi_mod ext3 jbd mbcache ehci_hcd ohci_hcd uhci_hcd
>CPU:    3
>EIP:    0061:[<c10e27a5>]    Not tainted VLI
>EFLAGS: 00210282   (2.6.20-2931.fc7xen #1)
>EIP is at sync_single+0x30/0x56
>eax: ffffffff   ebx: 00007725   ecx: 00000000   edx: c2e25100
>esi: 00272d89   edi: c7725000   ebp: ed669cec   esp: ed669cd4
>ds: 007b   es: 007b   ss: 0069
>Process modprobe (pid: 1093, ti=ed669000 task=ed628a90 task.ti=ed669000)
>Stack: 00000000 00594100 00001000 00007725 00272d89 ed70b848 ed669d10 c10e323d 
>       00000000 00fc7000 00000000 00fac000 ed70b848 eca08000 eca08010 ed669d24 
>       c100a6be 00001000 00000000 00fc7001 ed669d50 ee1c1c0b 00001000 00000000 
>Call Trace:
> [<c1005e4a>] show_trace_log_lvl+0x1a/0x2f
> [<c1005efa>] show_stack_log_lvl+0x9b/0xa3
> [<c1006096>] show_registers+0x194/0x26a
> [<c10062a6>] die+0x13a/0x24f
> [<c11fbc73>] do_trap+0x79/0x91
> [<c100684f>] do_invalid_op+0x97/0xa1
> [<c11fbb5d>] error_code+0x35/0x3c
> [<c10e323d>] swiotlb_sync_single_for_device+0xb4/0xd0
> [<c100a6be>] dma_sync_single_for_device+0x26/0x2b
> [<ee1c1c0b>] ar_context_add_page+0xae/0xe5 [fw_ohci]
> [<ee1c1c6c>] ar_context_init+0x2a/0x73 [fw_ohci]
> [<ee1c2b77>] pci_probe+0x192/0x37b [fw_ohci]
> [<c10e87f2>] pci_device_probe+0x39/0x5b
> [<c1144c7b>] really_probe+0x80/0x104
> [<c1144d94>] driver_probe_device+0x95/0xa1
> [<c1144eb2>] __driver_attach+0x76/0xaf
> [<c1144295>] bus_for_each_dev+0x3a/0x5f
> [<c1144b2c>] driver_attach+0x19/0x1b
> [<c1144585>] bus_add_driver+0x6a/0x170
> [<c11450d5>] driver_register+0x79/0x7e
> [<c10e896a>] __pci_register_driver+0x76/0xa3
> [<ee12c012>] fw_ohci_init+0x12/0x14 [fw_ohci]
> [<c103e987>] sys_init_module+0x173e/0x1899
> [<c1005660>] syscall_call+0x7/0xb
> =======================
>Code: 57 89 d7 56 53 83 ec 0c 2b 05 fc 81 5d c1 89 4d f0 c1 f8 0b c1 e0 03 03 05 14 82 5d c1 8b 48 04 8b 10 8b 45 08 48 83 f8 01 76 04 <0f> 0b eb fe 8b 45 08 89 ce 89 f9 89 44 24 04 8b 45 f0 89 04 24 
>EIP: [<c10e27a5>] sync_single+0x30/0x56 SS:ESP 0069:ed669cd4
> floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [VBTN]
>No dock devices found.
>ibm_acpi: ec object not found
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

Actions: View

Attachments on bug 302471: 206301 | 206311