Attachment 208561 Details for Bug 252321 – /var/log/dmesg

/var/log/dmesg

dmesg (text/plain), 22.30 KB, created by Egon Kastelijn on 2007-09-27 16:15:18 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Egon Kastelijn

Created: 2007-09-27 16:15:18 UTC

Size: 22.30 KB

patch

obsolete

>Linux version 2.6.20-2931.fc7xen (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Mon Aug 13 10:11:56 EDT 2007
>Command line: ro root=/dev/vg0/root rhgb
>BIOS-provided physical RAM map:
> Xen: 0000000000000000 - 00000001f016a000 (usable)
>Entering add_active_range(0, 0, 2031978) 0 entries of 256 used
>end_pfn_map = 2031978
>DMI 2.3 present.
>Entering add_active_range(0, 0, 2031978) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->  2031978
>  DMA32     2031978 ->  2031978
>  Normal    2031978 ->  2031978
>early_node_map[1] active PFN ranges
>    0:        0 ->  2031978
>On node 0 totalpages: 2031978
>  DMA zone: 27780 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 2004198 pages, LIFO batch:31
>  DMA32 zone: 0 pages used for memmap
>  Normal zone: 0 pages used for memmap
>ACPI: RSDP (v002 ACPIAM                                ) @ 0x00000000000fa740
>ACPI: XSDT (v001 A M I  OEMXSDT  0x12000521 MSFT 0x00000097) @ 0x00000000bff80100
>ACPI: FADT (v003 A M I  OEMFACP  0x12000521 MSFT 0x00000097) @ 0x00000000bff80290
>ACPI: MADT (v001 A M I  OEMAPIC  0x12000521 MSFT 0x00000097) @ 0x00000000bff80390
>ACPI: OEMB (v001 A M I  AMI_OEM  0x12000521 MSFT 0x00000097) @ 0x00000000bff8e040
>  >>> ERROR: Invalid checksum
>ACPI: MCFG (v001 A M I  OEMMCFG  0x12000521 MSFT 0x00000097) @ 0x00000000bff88840
>ACPI: DSDT (v001  A0411 A0411000 0x00000000 INTL 0x02002026) @ 0x0000000000000000
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to xen
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at c4000000 (gap: c0000000:3fb00000)
>PERCPU: Allocating 26240 bytes of per cpu data
>Built 1 zonelists.  Total pages: 2004198
>Kernel command line: ro root=/dev/vg0/root rhgb
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Xen reported: 3211.512 MHz processor.
>Console: colour VGA+ 80x50
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Software IO TLB enabled: 
> Aperture:     64 megabytes
> Kernel range: ffff88000aba7000 - ffff88000eba7000
> Address size: 27 bits
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Memory: 7882488k/8127912k available (2225k kernel code, 236564k reserved, 1355k data, 196k init)
>Calibrating delay using timer specific routine.. 7204.59 BogoMIPS (lpj=14409196)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>SMP alternatives: switching to SMP code
>Brought up 2 CPUs
>Initializing CPU#1
>sizeof(vma)=168 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=768 bytes
>sizeof(dentry)=224 bytes
>sizeof(ext3inode)=1040 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1936 bytes
>migration_cost=604
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>Boot video device is 0000:06:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>xen_mem: Initialising balloon driver.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:08: ioport range 0x290-0x297 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: faa00000-feafffff
>  PREFETCH window: cff00000-efefffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: c000-cfff
>  MEM window: fa900000-fa9fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: b000-bfff
>  MEM window: fa800000-fa8fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: a000-afff
>  MEM window: fa700000-fa7fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: 9000-9fff
>  MEM window: fa400000-fa6fffff
>  PREFETCH window: c4000000-c40fffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 9969k freed
>IA-32 Microcode Update Driver: v1.14a-xen <tigran@veritas.com>
>audit: initializing netlink socket (disabled)
>audit(1187992167.472:1): initialized
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff8801ef955210), AE_BAD_HEADER
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff8801ef955ad0), AE_BAD_HEADER
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Xen virtual console successfully installed as ttyS0
>Event-channel device installed.
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 196k freed
>Write protecting the kernel read-only data: 942k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ec00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new low speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfebfbc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>raid5: automatically using best checksumming function: generic_sse
>   generic_sse:  3280.000 MB/sec
>raid5: using function: generic_sse (3280.000 MB/sec)
>raid6: int64x1   1462 MB/s
>raid6: int64x2   1976 MB/s
>raid6: int64x4   2064 MB/s
>raid6: int64x8   1927 MB/s
>raid6: sse2x1    2200 MB/s
>raid6: sse2x2    3128 MB/s
>raid6: sse2x4    2993 MB/s
>raid6: using algorithm sse2x2 (3128 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ahci 0000:00:1f.2: version 2.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23
>usb 1-1: new low speed USB device using uhci_hcd and address 3
>usb 1-1: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1
>usb 1-2: new full speed USB device using uhci_hcd and address 4
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part 
>ata1: SATA max UDMA/133 cmd 0xFFFFC2000000E900 ctl 0x0 bmdma 0x0 irq 23
>ata2: SATA max UDMA/133 cmd 0xFFFFC2000000E980 ctl 0x0 bmdma 0x0 irq 23
>ata3: SATA max UDMA/133 cmd 0xFFFFC2000000EA00 ctl 0x0 bmdma 0x0 irq 23
>ata4: SATA max UDMA/133 cmd 0xFFFFC2000000EA80 ctl 0x0 bmdma 0x0 irq 23
>scsi0 : ahci
>usb 1-2: configuration #1 chosen from 1 choice
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 31/32)
>ata1.00: ata1: dev 0 multi count 0
>ata1.00: configured for UDMA/133
>scsi1 : ahci
>usb 3-1: configuration #1 chosen from 1 choice
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 31/32)
>ata2.00: ata2: dev 0 multi count 0
>ata2.00: configured for UDMA/133
>scsi2 : ahci
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 31/32)
>ata3.00: ata3: dev 0 multi count 0
>ata3.00: configured for UDMA/133
>scsi3 : ahci
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 31/32)
>ata4.00: ata4: dev 0 multi count 16
>ata4.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6H500F0   HA43 PQ: 0 ANSI: 5
>SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: Direct-Access     ATA      Maxtor 6H500F0   HA43 PQ: 0 ANSI: 5
>SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 1:0:0:0: Attached scsi disk sdb
>scsi 2:0:0:0: Direct-Access     ATA      Maxtor 6H500F0   HA43 PQ: 0 ANSI: 5
>SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2
>sd 2:0:0:0: Attached scsi disk sdc
>scsi 3:0:0:0: Direct-Access     ATA      ST3500630AS      3.AA PQ: 0 ANSI: 5
>SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 3a 00 00
>SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 3a 00 00
>SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1 sdd2
>sd 3:0:0:0: Attached scsi disk sdd
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>md: md0 stopped.
>md: bind<sdc2>
>md: bind<sdb2>
>md: bind<sdd2>
>md: bind<sda2>
>md: md0: raid array is not clean -- starting background reconstruction
>raid5: device sda2 operational as raid disk 0
>raid5: device sdb2 operational as raid disk 2
>raid5: device sdc2 operational as raid disk 1
>raid5: allocated 3218kB for md0
>raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 2
>RAID5 conf printout:
> --- rd:3 wd:3
> disk 0, o:1, dev:sda2
> disk 1, o:1, dev:sdc2
> disk 2, o:1, dev:sdb2
>md: resync of RAID array md0
>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
>md: using 128k window, over a total of 488279296 blocks.
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1187992288.466:2): selinux=0 auid=4294967295
>ata1: Spurious SDB FIS during NCQ issue=0x0 SAct=0x1e9 FIS=004040a1:00000002
>ata3: Spurious SDB FIS during NCQ issue=0x0 SAct=0x7e3 FIS=004040a1:00000010
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>sky2 v1.10 addr 0xfa9fc000 irq 19 Yukon-EC (0xb6) rev 2
>sky2 eth0: addr 00:15:f2:ae:f7:e3
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>sky2 v1.10 addr 0xfa8fc000 irq 16 Yukon-EC (0xb6) rev 2
>sky2 eth1: addr 00:15:f2:ae:eb:c7
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 23
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>8250_pnp: Unknown symbol serial8250_unregister_port
>8250_pnp: Unknown symbol serial8250_register_port
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>input: PC Speaker as /class/input/input3
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>ata_piix 0000:00:1f.1: version 2.00ac7
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata5: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14
>ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15
>scsi4 : ata_piix
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>intel_rng: FWH not detected
>Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>scsi5 : ata_piix
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
>iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ATA: abnormal status 0x7F on port 0x177
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 21 (level, low) -> IRQ 21
>e1000: 0000:01:00.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:33:28:18
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 22
>e1000: 0000:01:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:07:e9:0c:f5:62
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 23 (level, low) -> IRQ 23
>e1000: 0000:01:02.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:33:1e:6e
>e1000: eth4: e1000_probe: Intel(R) PRO/1000 Network Connection
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>No dock devices found.
>ibm_acpi: ec object not found
>md: md1 stopped.
>md: bind<sdc1>
>md: bind<sdb1>
>md: bind<sdd1>
>md: bind<sda1>
>md: raid1 personality registered for level 1
>raid1: raid set md1 active with 4 out of 4 mirrors
>device-mapper: multipath: version 1.0.5 loaded
>loop: loaded (max 8 devices)
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-12, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>ata1: Spurious SDB FIS during NCQ issue=0x0 SAct=0x8 FIS=004040a1:00000001
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>Adding 16777208k swap on /dev/vg0/swap.  Priority:-1 extents:1 across:16777208k

Actions: View

Attachments on bug 252321: 208441 | 208451 | 208561