Attachment 208961 Details for Bug 250779 – dmesg after booting with noapic acpi=off

dmesg after booting with noapic acpi=off

dmesg.1_27SEP07 (text/plain), 21.04 KB, created by Don Harden on 2007-09-27 20:00:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Don Harden

Created: 2007-09-27 20:00:03 UTC

Size: 21.04 KB

patch

obsolete

>Linux version 2.6.22.5-76.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Thu Aug 30 13:08:59 EDT 2007
>Command line: ro root=LABEL=/1 noapic acpi=off rhgb quiet 
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000dfbf4000 (usable)
> BIOS-e820: 00000000dfbf4000 - 00000000dfc5f000 (reserved)
> BIOS-e820: 00000000dfc5f000 - 00000000dfcfe000 (usable)
> BIOS-e820: 00000000dfcfe000 - 00000000dfedf000 (ACPI NVS)
> BIOS-e820: 00000000dfedf000 - 00000000dfeed000 (usable)
> BIOS-e820: 00000000dfeed000 - 00000000dfeff000 (ACPI data)
> BIOS-e820: 00000000dfeff000 - 00000000dff00000 (usable)
> BIOS-e820: 00000000fffc0000 - 00000000fffd0000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 916468) 1 entries of 3200 used
>Entering add_active_range(0, 916575, 916734) 2 entries of 3200 used
>Entering add_active_range(0, 917215, 917229) 3 entries of 3200 used
>Entering add_active_range(0, 917247, 917248) 4 entries of 3200 used
>Entering add_active_range(0, 1048576, 1179648) 5 entries of 3200 used
>end_pfn_map = 1179648
>DMI 2.4 present.
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000120000000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 916468) 1 entries of 3200 used
>Entering add_active_range(0, 916575, 916734) 2 entries of 3200 used
>Entering add_active_range(0, 917215, 917229) 3 entries of 3200 used
>Entering add_active_range(0, 917247, 917248) 4 entries of 3200 used
>Entering add_active_range(0, 1048576, 1179648) 5 entries of 3200 used
>Bootmem setup node 0 0000000000000000-0000000120000000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1179648
>early_node_map[6] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   916468
>    0:   916575 ->   916734
>    0:   917215 ->   917229
>    0:   917247 ->   917248
>    0:  1048576 ->  1179648
>On node 0 totalpages: 1047617
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1304 pages reserved
>  DMA zone: 2639 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 898266 pages, LIFO batch:31
>  Normal zone: 1792 pages used for memmap
>  Normal zone: 129280 pages, LIFO batch:31
>Intel MultiProcessor Specification v1.4
>MPTABLE: OEM ID: INTEL    MPTABLE: Product ID: S3000AHLX    MPTABLE: APIC at: 0xFEE00000
>Processor #0 (Bootup-CPU)
>I/O APIC #5 at 0xFEC00000.
>I/O APIC #6 at 0xFEC10000.
>Setting APIC routing to flat
>Processors: 1
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
>swsusp: Registered nosave memory region: 00000000dfbf4000 - 00000000dfc5f000
>swsusp: Registered nosave memory region: 00000000dfcfe000 - 00000000dfedf000
>swsusp: Registered nosave memory region: 00000000dfeed000 - 00000000dfeff000
>swsusp: Registered nosave memory region: 00000000dff00000 - 00000000fffc0000
>swsusp: Registered nosave memory region: 00000000fffc0000 - 00000000fffd0000
>swsusp: Registered nosave memory region: 00000000fffd0000 - 0000000100000000
>Allocating PCI resources starting at e0000000 (gap: dff00000:200c0000)
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 40968 bytes of per cpu data
>Built 1 zonelists.  Total pages: 1030185
>Kernel command line: ro root=LABEL=/1 noapic acpi=off rhgb quiet 
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 2400.130 MHz processor.
>Console: colour VGA+ 80x25
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x1026000 - 0x5026000
>Memory: 4058516k/4718592k available (2366k kernel code, 131952k reserved, 1400k data, 312k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 4802.14 BogoMIPS (lpj=2401074)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 28k freed
>Using local APIC timer interrupts.
>result 16667569
>Detected 16.667 MHz APIC timer.
>Brought up 1 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2048 bytes
>NET: Registered protocol family 16
>PCI: Using configuration type 1
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0500-053f claimed by ICH6 GPIO
>PCI: PXH quirk detected, disabling MSI for SHPC device
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Using IRQ router PIIX/ICH [8086/27b8] at 0000:00:1f.0
>PCI: setting IRQ 9 as level-triggered
>PCI: Found IRQ 9 for device 0000:00:1c.0
>PCI: Sharing IRQ 9 with 0000:00:1c.4
>PCI: Sharing IRQ 9 with 0000:02:02.0
>PCI: Sharing IRQ 9 with 0000:04:00.0
>PCI: setting IRQ 11 as level-triggered
>PCI: Found IRQ 11 for device 0000:00:1c.5
>PCI: Sharing IRQ 11 with 0000:00:1d.3
>PCI: Sharing IRQ 11 with 0000:04:00.4
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:01:00.0
>  IO window: 3000-3fff
>  MEM window: e8200000-e82fffff
>  PREFETCH window: e8400000-e84fffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: 3000-3fff
>  MEM window: e8200000-e82fffff
>  PREFETCH window: e8400000-e84fffff
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: 2000-2fff
>  MEM window: e8100000-e81fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: 1000-1fff
>  MEM window: e8000000-e80fffff
>  PREFETCH window: e0000000-e7ffffff
>PCI: Found IRQ 9 for device 0000:00:1c.0
>PCI: Sharing IRQ 9 with 0000:00:1c.4
>PCI: Sharing IRQ 9 with 0000:02:02.0
>PCI: Sharing IRQ 9 with 0000:04:00.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>PCI: Found IRQ 9 for device 0000:00:1c.4
>PCI: Sharing IRQ 9 with 0000:00:1c.0
>PCI: Sharing IRQ 9 with 0000:02:02.0
>PCI: Sharing IRQ 9 with 0000:04:00.0
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Found IRQ 11 for device 0000:00:1c.5
>PCI: Sharing IRQ 11 with 0000:00:1d.3
>PCI: Sharing IRQ 11 with 0000:04:00.4
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 12582912 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3147k freed
>audit: initializing netlink socket (disabled)
>audit(1190922064.367:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 4A67DBB026B0246B
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:05:04.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PCI: setting IRQ 10 as level-triggered
>PCI: Found IRQ 10 for device 0000:04:00.3
>PCI: Sharing IRQ 10 with 0000:00:1d.1
>PCI: Sharing IRQ 10 with 0000:00:1f.2
>PCI: Sharing IRQ 10 with 0000:00:1f.3
>0000:04:00.3: ttyS1 at I/O 0x2020 (irq = 10) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 312k freed
>Write protecting the kernel read-only data: 1060k
>logips2pp: Detected unknown logitech mouse model 89
>USB Universal Host Controller Interface driver v3.0
>PCI: Found IRQ 11 for device 0000:00:1d.0
>PCI: Sharing IRQ 11 with 0000:00:1d.7
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x00004080
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>PCI: Found IRQ 10 for device 0000:00:1d.1
>PCI: Sharing IRQ 10 with 0000:00:1f.2
>PCI: Sharing IRQ 10 with 0000:00:1f.3
>PCI: Sharing IRQ 10 with 0000:04:00.3
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 10, io base 0x00004060
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>PCI: Found IRQ 11 for device 0000:00:1d.2
>PCI: Sharing IRQ 11 with 0000:00:1f.1
>PCI: Sharing IRQ 11 with 0000:05:04.0
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 11, io base 0x00004040
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>PCI: Found IRQ 11 for device 0000:00:1d.3
>PCI: Sharing IRQ 11 with 0000:04:00.4
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 11, io base 0x00004020
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>PCI: Found IRQ 11 for device 0000:00:1d.7
>PCI: Sharing IRQ 11 with 0000:00:1d.0
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 11, io mem 0xe8300400
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.11
>PCI: Found IRQ 11 for device 0000:00:1f.1
>PCI: Sharing IRQ 11 with 0000:00:1d.2
>PCI: Sharing IRQ 11 with 0000:05:04.0
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000140b0 irq 14
>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000140b8 irq 15
>ata1.00: ATAPI: SONY    DVD RW AW-G170A, 1.62, max UDMA/66
>ata1.00: configured for UDMA/66
>scsi 0:0:0:0: CD-ROM            SONY     DVD RW AW-G170A  1.62 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>PCI: Found IRQ 10 for device 0000:00:1f.2
>PCI: Sharing IRQ 10 with 0000:00:1d.1
>PCI: Sharing IRQ 10 with 0000:00:1f.3
>PCI: Sharing IRQ 10 with 0000:04:00.3
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x00000000000140c8 ctl 0x00000000000140e6 bmdma 0x00000000000140a0 irq 10
>ata4: SATA max UDMA/133 cmd 0x00000000000140c0 ctl 0x00000000000140e2 bmdma 0x00000000000140a8 irq 10
>ata3.00: ATA-7: HDT722525DLA380, V44OA9BA, max UDMA/133
>ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.01: ATA-7: HDT722525DLA380, V44OA9BA, max UDMA/133
>ata3.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>ata3.01: configured for UDMA/133
>ata4.00: ATA-7: HDT722525DLA380, V44OA9BA, max UDMA/133
>ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata4.01: ATA-7: HDT722525DLA380, V44OA9BA, max UDMA/133
>ata4.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata4.00: configured for UDMA/133
>ata4.01: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      HDT722525DLA380  V44O PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 2:0:0:0: [sda] Attached SCSI disk
>scsi 2:0:1:0: Direct-Access     ATA      HDT722525DLA380  V44O PQ: 0 ANSI: 5
>sd 2:0:1:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:1:0: [sdb] Write Protect is off
>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:1:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:1:0: [sdb] Write Protect is off
>sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 2:0:1:0: [sdb] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access     ATA      HDT722525DLA380  V44O PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 3:0:0:0: [sdc] Attached SCSI disk
>scsi 3:0:1:0: Direct-Access     ATA      HDT722525DLA380  V44O PQ: 0 ANSI: 5
>sd 3:0:1:0: [sdd] 488397168 512-byte hardware sectors (250059 MB)
>sd 3:0:1:0: [sdd] Write Protect is off
>sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:1:0: [sdd] 488397168 512-byte hardware sectors (250059 MB)
>sd 3:0:1:0: [sdd] Write Protect is off
>sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1
>sd 3:0:1:0: [sdd] Attached SCSI disk
>PCI: Found IRQ 9 for device 0000:02:02.0
>PCI: Sharing IRQ 9 with 0000:04:00.0
>scsi4 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
>        <Adaptec 29160 Ultra160 SCSI adapter>
>        aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
>
>scsi: waiting for bus probes to complete ...
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1190922088.550:2): selinux=0 auid=4294967295
>scsi 0:0:0:0: Attached scsi generic sg0 type 5
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:1:0: Attached scsi generic sg2 type 0
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>sd 3:0:1:0: Attached scsi generic sg4 type 0
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>PCI: Found IRQ 10 for device 0000:00:1f.3
>PCI: Sharing IRQ 10 with 0000:00:1d.1
>PCI: Sharing IRQ 10 with 0000:00:1f.2
>PCI: Sharing IRQ 10 with 0000:04:00.3
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>PCI: Found IRQ 9 for device 0000:04:00.0
>PCI: Sharing IRQ 9 with 0000:02:02.0
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>intel_rng: Firmware space is locked read-only. <4>intel_rng: If you can't or
> don't want to <4>intel_rng: disable this in firmware setup, and <4>intel_rng: if
> you are certain that your <4>intel_rng: system has a functional
> RNG, try<4>intel_rng: using the 'no_fwh_detect' option.
>e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:15:17:29:7c:c1
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>PCI: Found IRQ 11 for device 0000:05:00.0
>firewire_ohci: Added fw-ohci device 0000:05:00.0, OHCI version 1.10
>firewire_core: created new fw device fw0 (0 config rom retries)
>FDC 0 is a post-1991 82077
>md: md0 stopped.
>md: bind<sdc1>
>md: bind<sdd1>
>md: bind<sdb1>
>raid5: automatically using best checksumming function: generic_sse
>   generic_sse:  8500.000 MB/sec
>raid5: using function: generic_sse (8500.000 MB/sec)
>raid6: int64x1   2035 MB/s
>raid6: int64x2   2738 MB/s
>raid6: int64x4   2304 MB/s
>raid6: int64x8   1843 MB/s
>raid6: sse2x1    3214 MB/s
>raid6: sse2x2    3324 MB/s
>raid6: sse2x4    7207 MB/s
>raid6: using algorithm sse2x4 (7207 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>raid5: device sdb1 operational as raid disk 0
>raid5: device sdd1 operational as raid disk 2
>raid5: device sdc1 operational as raid disk 1
>raid5: allocated 3212kB for md0
>raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 2
>RAID5 conf printout:
> --- rd:3 wd:3
> disk 0, o:1, dev:sdb1
> disk 1, o:1, dev:sdc1
> disk 2, o:1, dev:sdd1
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 4192956k swap on /dev/sda3.  Priority:-1 extents:1 across:4192956k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
>e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>eth0: no IPv6 routers present
>Uhhuh. NMI received for unknown reason a9.
>You have some hardware problem, likely on the PCI bus.
>Dazed and confused, but trying to continue

Actions: View

Attachments on bug 250779: 206041 | 206081 | 208261 | 208961 | 209061