Attachment 211751 Details for Bug 257481 – dmesg output

dmesg output

dmesg.txt (text/plain), 23.41 KB, created by Ville Skyttä on 2007-09-30 14:09:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ville Skyttä

Created: 2007-09-30 14:09:22 UTC

Size: 23.41 KB

patch

obsolete

>Linux version 2.6.22.9-91.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Thu Sep 27 20:47:39 EDT 2007
>Command line: ro root=LABEL=/ quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003bfc0000 (usable)
> BIOS-e820: 000000003bfc0000 - 000000003bfce000 (ACPI data)
> BIOS-e820: 000000003bfce000 - 000000003bff0000 (ACPI NVS)
> BIOS-e820: 000000003bff0000 - 000000003c000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 245696) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000FB870, 0024 (r2 ACPIAM)
>ACPI: XSDT 3BFC0100, 0044 (r1 A M I  OEMXSDT   4000619 MSFT       97)
>ACPI: FACP 3BFC0290, 00F4 (r3 A M I  OEMFACP   4000619 MSFT       97)
>ACPI: DSDT 3BFC0440, 5683 (r1  A0368 A0368001        1 INTL  2002026)
>ACPI: FACS 3BFCE000, 0040
>ACPI: APIC 3BFC0390, 0070 (r1 A M I  OEMAPIC   4000619 MSFT       97)
>ACPI: MCFG 3BFC0400, 003C (r1 A M I  OEMMCFG   4000619 MSFT       97)
>ACPI: OEMB 3BFCE040, 005B (r1 A M I  AMI_OEM   4000619 MSFT       97)
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003bfc0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 245696) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000003bfc0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   245696
>On node 0 totalpages: 245599
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1299 pages reserved
>  DMA zone: 2644 pages, LIFO batch:0
>  DMA32 zone: 3303 pages used for memmap
>  DMA32 zone: 238297 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x508
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e5000
>swsusp: Registered nosave memory region: 00000000000e5000 - 0000000000100000
>Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
>SMP: Allowing 2 CPUs, 1 hotplug CPUs
>PERCPU: Allocating 40968 bytes of per cpu data
>Built 1 zonelists.  Total pages: 240941
>Kernel command line: ro root=LABEL=/ quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>time.c: Detected 2009.166 MHz processor.
>Console: colour VGA+ 80x25
>Checking aperture...
>CPU 0: aperture @ 12a000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 959516k/982784k available (2362k kernel code, 22880k reserved, 1400k data, 312k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 4020.71 BogoMIPS (lpj=2010358)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 12557303
>Detected 12.557 MHz APIC timer.
>Brought up 1 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2048 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:10.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *5
>ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *11
>ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *7
>ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:06: iomem range 0xfefe0000-0xfefe01ff has been reserved
>pnp: 00:06: iomem range 0xfeb80000-0xfebbffff has been reserved
>pnp: 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
>pnp: 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
>pnp: 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved
>pnp: 00:0a: ioport range 0x290-0x297 has been reserved
>pnp: 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
>pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0c: iomem range 0xc0000-0xcffff has been reserved
>pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0c: iomem range 0x100000-0x3fffffff could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:10.0
>  IO window: c000-cfff
>  MEM window: faa00000-faafffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3088k freed
>audit: initializing netlink socket (disabled)
>audit(1191148279.356:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key F49647332066F9
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:05.0
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00)
>powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x6
>powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x8
>powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
>Freeing unused kernel memory: 312k freed
>Write protecting the kernel read-only data: 1060k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfebde000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:0b.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:0b.1
>ehci_hcd 0000:00:0b.1: irq 22, io mem 0xfebdfc00
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>sata_nv 0000:00:0e.0: version 3.4
>ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0x000000000001e800 ctl 0x000000000001e482 bmdma 0x000000000001e000 irq 21
>ata2: SATA max UDMA/133 cmd 0x000000000001e400 ctl 0x000000000001e082 bmdma 0x000000000001e008 irq 21
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: SAMSUNG SP2504C, VT100-33, max UDMA7
>ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>usb 2-3: new high speed USB device using ehci_hcd and address 4
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LSA1] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x000000000001dc00 ctl 0x000000000001d882 bmdma 0x000000000001d400 irq 20
>ata4: SATA max UDMA/133 cmd 0x000000000001d800 ctl 0x000000000001d482 bmdma 0x000000000001d408 irq 20
>usb 2-3: configuration #1 chosen from 1 choice
>hub 2-3:1.0: USB hub found
>hub 2-3:1.0: 2 ports detected
>ata3: SATA link down (SStatus 0 SControl 300)
>usb 1-1: new full speed USB device using ohci_hcd and address 2
>usb 1-1: configuration #1 chosen from 1 choice
>ata4: SATA link down (SStatus 0 SControl 300)
>usb 1-2: new low speed USB device using ohci_hcd and address 3
>usb 1-2: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-2
>usb 2-3.1: new low speed USB device using ehci_hcd and address 5
>usb 2-3.1: configuration #1 chosen from 1 choice
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1854 types, 84 bools, 1 sens, 1024 cats
>security:  61 classes, 70584 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1191148285.061:2): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNEC] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  100.14.19  Wed Sep 12 14:08:38 PDT 2007
>pata_amd 0000:00:0d.0: version 0.3.8
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>scsi4 : pata_amd
>scsi5 : pata_amd
>ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14
>ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-4120B, A117, max UDMA/33
>ata5.00: configured for UDMA/33
>ata6.00: ATAPI: HL-DT-ST GCE-8160B, 2.01, max MWDMA2
>ata6.00: configured for MWDMA2
>scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4120B A117 PQ: 0 ANSI: 5
>scsi 4:0:0:0: Attached scsi generic sg1 type 5
>scsi 5:0:0:0: CD-ROM            HL-DT-ST CD-RW GCE-8160B  2.01 PQ: 0 ANSI: 5
>scsi 5:0:0:0: Attached scsi generic sg2 type 5
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:04:05.0[A] -> Link [LNKD] -> GSI 18 (level, low) -> IRQ 18
>firewire_ohci: Added fw-ohci device 0000:04:05.0, OHCI version 1.0
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:14.0 to 64
>forcedeth: using HIGHDMA
>sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>sr 5:0:0:0: Attached scsi CD-ROM sr1
>firewire_core: created new fw device fw0 (0 config rom retries)
>eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:14.0
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17
>ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [LNKB] -> GSI 17 (level, low) -> IRQ 17
>ssb: Sonics Silicon Backplane found on PCI device 0000:04:09.0
>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:10.1 to 64
>b43-phy0: Broadcom 4306 WLAN found
>b43-phy0 debug: Found PHY: Analog 2, Type 2, Revision 2
>b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
>phy0: Selected rate control algorithm 'simple'
>No dock devices found.
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>EXT3 FS on sda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda4, type ext3), uses xattr
>Adding 2008116k swap on /dev/sda2.  Priority:-1 extents:1 across:2008116k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>Marking TSC unstable due to cpufreq changes
>Time: acpi_pm clocksource has been installed.
>b43-phy0 debug: Adding Interface type 2
>b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
>b43-phy0 debug: Chip initialized
>b43-phy0 debug: 30-bit DMA initialized
>b43-phy0 debug: Wireless interface started
>b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:0d:0b:98:9a:16
>wlan0: RX authentication from 00:0d:0b:98:9a:16 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:0d:0b:98:9a:16
>wlan0: RX AssocResp from 00:0d:0b:98:9a:16 (capab=0x411 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:0d:0b:98:9a:16)
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>audit(1191137518.887:3): avc:  denied  { create } for  pid=1966 comm="ifdhandler" name="0" scontext=system_u:system_r:openct_t:s0 tcontext=system_u:object_r:openct_var_run_t:s0 tclass=sock_file
>audit(1191137518.888:4): avc:  denied  { setattr } for  pid=1966 comm="ifdhandler" name="0" dev=sda3 ino=7750854 scontext=system_u:system_r:openct_t:s0 tcontext=system_u:object_r:openct_var_run_t:s0 tclass=sock_file
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>audit(1191137519.191:5): avc:  denied  { name_bind } for  pid=1988 comm="openvpn" src=8195 scontext=system_u:system_r:openvpn_t:s0 tcontext=system_u:object_r:port_t:s0 tclass=udp_socket
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (3839 buckets, 30712 max)
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bridge firewalling registered
>SELinux: initialized (dev 0:16, type nfs4), uses genfs_contexts
>SELinux: initialized (dev 0:17, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:16, type nfs4), uses genfs_contexts
>SELinux: initialized (dev 0:17, type nfs), uses genfs_contexts
>wlan0: RX deauthentication from 00:0d:0b:98:9a:16 (reason=7)
>wlan0: deauthenticated
>wlan0: RX deauthentication from 00:0d:0b:98:9a:16 (reason=7)
>wlan0: RX deauthentication from 00:0d:0b:98:9a:16 (reason=7)
>wlan0: authenticate with AP 00:0d:0b:98:9a:16
>wlan0: RX authentication from 00:0d:0b:98:9a:16 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:0d:0b:98:9a:16
>wlan0: RX ReassocResp from 00:0d:0b:98:9a:16 (capab=0x411 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:0d:0b:98:9a:16)
>wlan0: RX deauthentication from 00:0d:0b:98:9a:16 (reason=7)
>wlan0: deauthenticated
>wlan0: authenticate with AP 00:0d:0b:98:9a:16
>wlan0: RX authentication from 00:0d:0b:98:9a:16 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:0d:0b:98:9a:16
>wlan0: RX ReassocResp from 00:0d:0b:98:9a:16 (capab=0x411 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:0d:0b:98:9a:16)

Actions: View

Attachments on bug 257481: 211751 | 211761