Attachment 212441 Details for Bug 260481 – dmesg of kernel 2.6.22.9-91.fc7 (added "pnpacpi=off" boot option)

dmesg of kernel 2.6.22.9-91.fc7 (added "pnpacpi=off" boot option)

kernel.2.6.22.9-91.fc7-acpi_off.log (text/plain), 21.63 KB, created by Helge Deller on 2007-10-01 16:05:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Helge Deller

Created: 2007-10-01 16:05:41 UTC

Size: 21.63 KB

patch

obsolete

>Linux version 2.6.22.9-91.fc7 (kojibuilder@xenbuilder1.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Thu Sep 27 23:10:59 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
> BIOS-e820: 000000003ffd0000 - 000000003fff0c00 (reserved)
> BIOS-e820: 000000003fff0c00 - 000000003fffc000 (ACPI NVS)
> BIOS-e820: 000000003fffc000 - 0000000040000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 262096) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262096
>early_node_map[1] active PFN ranges
>    0:        0 ->   262096
>On node 0 totalpages: 262096
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 255 pages used for memmap
>  HighMem zone: 32465 pages, LIFO batch:7
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FDF80, 0014 (r0 COMPAQ)
>ACPI: RSDT 3FFF0C84, 002C (r1 HP     HP0890   23060520 CPQ         1)
>ACPI: FACP 3FFF0C00, 0084 (r2 HP     HP0890          2 CPQ         1)
>ACPI: DSDT 3FFF0CB0, 6DF6 (r1 HP       nc6000    10000 MSFT  100000E)
>ACPI: FACS 3FFFBE80, 0040
>ACPI: SSDT 3FFF7AA6, 028A (r1 COMPAQ  CPQGysr     1001 MSFT  100000E)
>ACPI: PM-Timer IO Port: 0x1008
>Allocating PCI resources starting at 50000000 (gap: 40000000:c0000000)
>Built 1 zonelists.  Total pages: 260049
>Kernel command line: ro root=LABEL=/ vga=0x317 rhgb quiet pnpacpi=off
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (0180f000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0791000 soft=c0771000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1594.923 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1031548k/1048384k available (2108k kernel code, 16148k reserved, 1112k data, 260k init, 130880k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc072b000 - 0xc076c000   ( 260 kB)
>      .data : 0xc060f3a8 - 0xc0725504   (1112 kB)
>      .text : 0xc0400000 - 0xc060f3a8   (2108 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 3190.92 BogoMIPS (lpj=1595464)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9f1bf 00000000 00000000 00002040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0c00)
>CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1536 bytes
>HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
>Time: 17:51:40  Date: 10/01/07
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=5
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [C044] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Enabled i801 SMBus device
>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 1100-113f claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.C044._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C044.C045._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C044.C056._PRT]
>ACPI: PCI Interrupt Link [C0C1] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C0C2] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C0C3] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C0C4] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C0C5] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C0C6] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C0C7] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C0C8] (IRQs *10 11)
>ACPI: Power Resource [C16D] (on)
>ACPI: Power Resource [C184] (on)
>ACPI: Power Resource [C18B] (on)
>ACPI: Power Resource [C195] (on)
>ACPI: Power Resource [C0E6] (on)
>ACPI: Power Resource [C20B] (off)
>ACPI: Power Resource [C20C] (off)
>ACPI: Power Resource [C20D] (off)
>ACPI: Power Resource [C20E] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: 90300000-903fffff
>  PREFETCH window: 98000000-9fffffff
>PCI: Bus 3, cardbus bridge: 0000:02:06.0
>  IO window: 00004000-000040ff
>  IO window: 00004400-000044ff
>  PREFETCH window: 50000000-53ffffff
>  MEM window: 60000000-63ffffff
>PCI: Bus 5, cardbus bridge: 0000:02:06.1
>  IO window: 00004800-000048ff
>  IO window: 00004c00-00004cff
>  PREFETCH window: 54000000-57ffffff
>  MEM window: 64000000-67ffffff
>PCI: Bus 9, cardbus bridge: 0000:02:06.3
>  IO window: 00005000-000050ff
>  IO window: 00005400-000054ff
>  PREFETCH window: 58000000-5bffffff
>  MEM window: 68000000-6bffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 4000-5fff
>  MEM window: 90000000-902fffff
>  PREFETCH window: 50000000-5dffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI Interrupt 0000:02:06.3[A] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2830k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1191261099.511:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 1C0E7986B75803D3
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0x98000000, mapped to 0xf8880000, using 3072k, total 32704k
>vesafb: mode is 1024x768x16, linelength=2048, pages=20
>vesafb: protected mode interface info at c000:59e9
>vesafb: pmi: set display start = c00c5a57, set palette = c00c5a91
>vesafb: pmi: ports = 2010 2016 2054 2038 203c 205c 2000 2004 20b0 20b2 20b4 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ACPI: Transitioning device [C20F] to D3
>ACPI: Transitioning device [C20F] to D3
>ACPI: Fan [C20F] (off)
>ACPI: Transitioning device [C210] to D3
>ACPI: Transitioning device [C210] to D3
>ACPI: Fan [C210] (off)
>ACPI: Transitioning device [C211] to D3
>ACPI: Transitioning device [C211] to D3
>ACPI: Fan [C211] (off)
>ACPI: Transitioning device [C212] to D3
>ACPI: Transitioning device [C212] to D3
>ACPI: Fan [C212] (off)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Thermal Zone [TZ1] (71 C)
>ACPI: Thermal Zone [TZ2] (56 C)
>Marking TSC unstable due to: possible TSC halt in C2.
>Time: acpi_pm clocksource has been installed.
>Switched to high resolution mode on CPU 0
>ACPI: Thermal Zone [TZ3] (29 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 855PM Chipset.
>agpgart: AGP aperture is 256M @ 0xb0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Clocksource tsc unstable (delta = -196774538 ns)
>serial8250: ttyS2 at I/O 0x3e8 (irq = 3) is a 16550A
>ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [C0C2] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:02:06.0 [103c:0890]
>Yenta O2: res at 0x94/0xD4: ea/00
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x00b8, PCI irq 10
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff
>cs: IO port probe 0x4000-0x5fff: clean.
>pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x902fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x5dffffff
>Yenta: CardBus bridge found at 0000:02:06.1 [103c:0890]
>Yenta: ISA IRQ mask 0x00b8, PCI irq 10
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #05 to #08
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff
>cs: IO port probe 0x4000-0x5fff: clean.
>pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x902fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x5dffffff
>Yenta: CardBus bridge found at 0000:02:06.3 [103c:0890]
>Yenta: ISA IRQ mask 0x00b8, PCI irq 10
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #08 to #0c
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff
>cs: IO port probe 0x4000-0x5fff: clean.
>pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x902fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x5dffffff
>PNP: No PS/2 controller found. Probing ports directly.
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 11:241:895
>Freeing unused kernel memory: 260k freed
>Write protecting the kernel read-only data: 858k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [C0C1] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [C0C1] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 10, io base 0x000038c0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [C0C4] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 10, io base 0x000038e0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 10, io base 0x00003c00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [C0C8] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [C0C8] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 10, io mem 0xa0000000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x1b6eb1, caps: 0xa84793/0x100000
>serio: Synaptics pass-through port at isa0060/serio4/input0
>SCSI subsystem initialized
>libata version 2.21 loaded.
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ata_piix 0000:00:1f.1: version 2.11
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [C0C3] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00013c20 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00013c28 irq 15
>ata1.00: ATA-6: HTS548080M9AT00, MG4OA53A, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>usb 2-1: new low speed USB device using uhci_hcd and address 3
>ata2.00: ATAPI: Toshiba DVD-ROM SD-C2612, 1A25, max MWDMA2
>usb 2-1: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1
>ata2.00: configured for MWDMA2
>scsi 0:0:0:0: Direct-Access     ATA      HTS548080M9AT00  MG4O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>usb 2-2: new low speed USB device using uhci_hcd and address 4
> sda1 sda2 sda3 sda4 <<6>usb 2-2: configuration #1 chosen from 1 choice
> sda5<6>input: CHICONY Compaq USB Keyboard as /class/input/input4
>input: USB HID v1.10 Keyboard [CHICONY Compaq USB Keyboard] on usb-0000:00:1d.1-2
> sda6<6>input: CHICONY Compaq USB Keyboard as /class/input/input5
>input,hiddev96: USB HID v1.10 Device [CHICONY Compaq USB Keyboard] on usb-0000:00:1d.1-2
> sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            Toshiba  DVD-ROM SD-C2612 1A25 PQ: 0 ANSI: 5
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1191261106.834:2): selinux=0 auid=4294967295
>IBM TrackPoint firmware: 0x12, buttons: 0/0
>input: TPPS/2 IBM TrackPoint as /class/input/input6
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>cs: IO port probe 0x100-0x3af: excluding 0x140-0x14f 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x100-0x3af: excluding 0x140-0x14f 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x100-0x3af: excluding 0x140-0x14f 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>intel_rng: FWH not detected
>tg3.c:v3.77 (May 31, 2007)
>ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:02:0e.0[A] -> Link [C0C5] -> GSI 11 (level, low) -> IRQ 11
>eth0: Tigon3 [partno(BMC5705mA3) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:14:38:09:65:04
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
>eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
>sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [C0C2] -> GSI 11 (level, low) -> IRQ 11
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ath_hal: module license 'Proprietary' taints kernel.
>ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
>wlan: 0.8.4.2 (0.9.3.1)
>ath_pci: 0.9.4.5 (0.9.3.1)
>ACPI: PCI Interrupt Link [C0C6] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [C0C6] -> GSI 11 (level, low) -> IRQ 11
>ath_rate_sample: 1.2 (0.9.3.1)
>wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>wifi0: H/W encryption support: WEP AES AES_CCM TKIP
>wifi0: mac 5.6 phy 4.1 5 GHz radio 1.7 2 GHz radio 2.3
>wifi0: Use hw queue 1 for WME_AC_BE traffic
>wifi0: Use hw queue 0 for WME_AC_BK traffic
>wifi0: Use hw queue 2 for WME_AC_VI traffic
>wifi0: Use hw queue 3 for WME_AC_VO traffic
>wifi0: Use hw queue 8 for CAB traffic
>wifi0: Use hw queue 9 for beacons
>wifi0: Atheros 5212: mem=0x90080000, irq=11
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [C0C2] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>AC'97 0 analog subsections not ready
>intel8x0_measure_ac97_clock: measured 50439 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [C0C2] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [C0C1] -> GSI 10 (level, low) -> IRQ 10
>ACPI: AC Adapter [C134] (on-line)
>ACPI: Battery Slot [C137] (battery present)
>ACPI: Battery Slot [C136] (battery absent)
>No dock devices found.
>input: Power Button (FF) as /class/input/input7
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input8
>ACPI: Sleep Button (CM) [C139]
>input: Lid Switch as /class/input/input9
>ACPI: Lid Switch [C138]
>ACPI: Video Device [C0CF] (multi-head: yes  rom: no  post: no)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1437776k swap on /dev/sda5.  Priority:-1 extents:1 across:1437776k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>audit(1191253949.456:3): audit_pid=1771 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.

Actions: View

Attachments on bug 260481: 212431 | 212441