Attachment 212711 Details for Bug 314551 – dmesg output

dmesg output

dmesg.txt (text/plain), 22.17 KB, created by Ashish Shukla on 2007-10-01 19:16:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ashish Shukla

Created: 2007-10-01 19:16:47 UTC

Size: 22.17 KB

patch

obsolete

>Linux version 2.6.20-2936.fc7xen (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Fri Sep 21 11:56:20 EDT 2007
>Command line: ro root=LABEL=/ rhgb quiet
>BIOS-provided physical RAM map:
> Xen: 0000000000000000 - 000000003a302000 (usable)
>Entering add_active_range(0, 0, 238338) 0 entries of 256 used
>end_pfn_map = 238338
>DMI 2.3 present.
>Entering add_active_range(0, 0, 238338) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->   238338
>  DMA32      238338 ->   238338
>  Normal     238338 ->   238338
>early_node_map[1] active PFN ranges
>    0:        0 ->   238338
>On node 0 totalpages: 238338
>  DMA zone: 3258 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 235080 pages, LIFO batch:31
>  DMA32 zone: 0 pages used for memmap
>  Normal zone: 0 pages used for memmap
>ACPI: RSDP (v000 INTEL                                 ) @ 0x00000000000fe020
>ACPI: RSDT (v001 INTEL  D945GNT  0x00000ced MSFT 0x01000013) @ 0x000000003f6fde48
>ACPI: FADT (v001 INTEL  D945GNT  0x00000ced MSFT 0x01000013) @ 0x000000003f6fcf10
>ACPI: MADT (v001 INTEL  D945GNT  0x00000ced MSFT 0x01000013) @ 0x000000003f6fce10
>ACPI: WDDT (v001 INTEL  D945GNT  0x00000ced MSFT 0x01000013) @ 0x000000003f6f7f90
>ACPI: MCFG (v001 INTEL  D945GNT  0x00000ced MSFT 0x01000013) @ 0x000000003f6f7f10
>ACPI: ASF! (v032 INTEL  D945GNT  0x00000ced MSFT 0x01000013) @ 0x000000003f6fcd10
>ACPI: HPET (v001 INTEL  D945GNT  0x00000ced MSFT 0x01000013) @ 0x000000003f6f7e90
>ACPI: SSDT (v001 INTEL     CpuPm 0x00000ced MSFT 0x01000013) @ 0x000000003f6fdc10
>ACPI: SSDT (v001 INTEL   Cpu0Ist 0x00000ced MSFT 0x01000013) @ 0x000000003f6fda10
>ACPI: SSDT (v001 INTEL   Cpu1Ist 0x00000ced MSFT 0x01000013) @ 0x000000003f6fd810
>ACPI: SSDT (v001 INTEL   Cpu2Ist 0x00000ced MSFT 0x01000013) @ 0x000000003f6fd610
>ACPI: SSDT (v001 INTEL   Cpu3Ist 0x00000ced MSFT 0x01000013) @ 0x000000003f6fd410
>ACPI: DSDT (v001 INTEL  D945GNT  0x00000ced MSFT 0x01000013) @ 0x0000000000000000
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to xen
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 3f700000:c0900000)
>PERCPU: Allocating 26240 bytes of per cpu data
>Built 1 zonelists.  Total pages: 235080
>Kernel command line: ro root=LABEL=/ rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Xen reported: 3000.136 MHz processor.
>Console: colour VGA+ 80x50
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Software IO TLB enabled: 
> Aperture:     2 megabytes
> Kernel range: ffff880002230000 - ffff880002430000
> Address size: 25 bits
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Memory: 911616k/953352k available (2226k kernel code, 33228k reserved, 1355k data, 196k init)
>Calibrating delay using timer specific routine.. 6005.14 BogoMIPS (lpj=12010288)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>SMP alternatives: switching to SMP code
>Brought up 2 CPUs
>Initializing CPU#1
>sizeof(vma)=168 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=768 bytes
>sizeof(dentry)=224 bytes
>sizeof(ext3inode)=1040 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1936 bytes
>migration_cost=6
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>Boot video device is 0000:00:02.0
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0500-053f claimed by ICH6 GPIO
>PCI: Firmware left 0000:04:08.0 e100 interrupts enabled, disabling
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>xen_mem: Initialising balloon driver.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:06: ioport range 0x500-0x53f has been reserved
>pnp: 00:06: ioport range 0x400-0x47f could not be reserved
>pnp: 00:06: ioport range 0x680-0x6ff has been reserved
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: 48200000-482fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: 48300000-483fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: disabled.
>  MEM window: 48400000-484fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: 1000-1fff
>  MEM window: 48000000-480fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 8081k freed
>IA-32 Microcode Update Driver: v1.14a-xen <tigran@veritas.com>
>audit: initializing netlink socket (disabled)
>audit(1191277879.476:1): initialized
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>Real Time Clock Driver v1.12ac
>hpet_acpi_add: no address or irqs in _CRS
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 945G Chipset.
>agpgart: Detected 8060K stolen memory.
>agpgart: AGP aperture is 128M @ 0x40000000
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Xen virtual console successfully installed as ttyS0
>Event-channel device installed.
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 196k freed
>Write protecting the kernel read-only data: 942k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-2: new low speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0x481a4000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.1: version 2.00ac7
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x20B0 irq 14
>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x20B8 irq 15
>scsi0 : ata_piix
>ata1.00: ATA-7, max UDMA/100, 312581808 sectors: LBA48 
>ata1.00: ata1: dev 0 multi count 16
>usb 1-2: device not accepting address 2, error -71
>ata1.01: ATAPI, max UDMA/33
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>scsi1 : ata_piix
>ata2: port disabled. ignoring.
>scsi 0:0:0:0: Direct-Access     ATA      ST3160812AV      3.AS PQ: 0 ANSI: 5
>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
>sd 0:0:0:0: Attached scsi disk sda
>scsi 0:0:1:0: CD-ROM            TSSTcorp CD/DVDW SH-S182F SB01 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata3: SATA max UDMA/133 cmd 0x20C8 ctl 0x20EE bmdma 0x20A0 irq 19
>ata4: SATA max UDMA/133 cmd 0x20C0 ctl 0x20EA bmdma 0x20A8 irq 19
>scsi2 : ata_piix
>ATA: abnormal status 0x7F on port 0x20CF
>ATA: abnormal status 0x7F on port 0x20CF
>ata3.01: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
>ata3.01: ata3: dev 1 multi count 16
>ata3.01: configured for UDMA/133
>scsi3 : ata_piix
>ATA: abnormal status 0x7F on port 0x20C7
>scsi 2:0:1:0: Direct-Access     ATA      ST3250824SV      3.AS PQ: 0 ANSI: 5
>SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 >
>sd 2:0:1:0: Attached scsi disk sdb
>usb 1-2: new low speed USB device using uhci_hcd and address 4
>usb 1-2: configuration #1 chosen from 1 choice
>hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS ES 650Y-IN FW:853.m3.I USB FW:m3] on usb-0000:00:1d.0-2
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>usb 4-2: configuration #2 chosen from 2 choices
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1854 types, 84 bools, 1 sens, 1024 cats
>security:  61 classes, 70584 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda5, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1191277885.040:2): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 0:0:1:0: Attached scsi generic sg1 type 5
>sd 2:0:1:0: Attached scsi generic sg2 type 0
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>input: PC Speaker as /class/input/input3
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>eth0: register 'cdc_ether' at usb-0000:00:1d.3-2, CDC Ethernet Device, 00:08:5c:5b:f4:13
>usbcore: registered new interface driver cdc_ether
>e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 20 (level, low) -> IRQ 20
>e100: eth1: e100_probe: addr 0x48008000, irq 20, MAC addr 00:13:20:B7:55:0A
>iTCO_vendor_support: vendor-support=0
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
>iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>8139cp 0000:04:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
>8139cp 0000:04:00.0: Try the "8139too" driver instead.
>intel_rng: Firmware space is locked read-only. If you can't or
>intel_rng: don't want to disable this in firmware setup, and if
>intel_rng: you are certain that your system has a functional
>intel_rng: RNG, try using the 'no_fwh_detect' option.
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 21 (level, low) -> IRQ 21
>eth1: RealTek RTL8139 at 0xffffc2000002a000, 00:00:21:23:cc:ed, IRQ 21
>eth1:  Identified 8139 chip type 'RTL-8139B'
>ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 22 (level, low) -> IRQ 22
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>floppy0: no floppy controllers found
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>audit(1191258102.661:3): avc:  denied  { getattr } for  pid=1185 comm="rhgb" name="installed-modules.scm" dev=sda5 ino=3670041 scontext=system_u:system_r:rhgb_t:s0 tcontext=user_u:object_r:var_lib_t:s0 tclass=file
>audit(1191258102.661:4): avc:  denied  { read } for  pid=1185 comm="rhgb" name="installed-modules.scm" dev=sda5 ino=3670041 scontext=system_u:system_r:rhgb_t:s0 tcontext=user_u:object_r:var_lib_t:s0 tclass=file
>audit(1191258102.861:5): avc:  denied  { write } for  pid=1185 comm="rhgb" name="uimhelper-root" dev=sda5 ino=2916450 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:tmp_t:s0 tclass=sock_file
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>No dock devices found.
>ibm_acpi: ec object not found
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda5, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda6, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 1028120k swap on /dev/sda7.  Priority:-1 extents:1 across:1028120k
>Adding 4192892k swap on /dev/sdb6.  Priority:-2 extents:1 across:4192892k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>audit(1191258117.742:6): audit_pid=1819 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>eth2: no IPv6 routers present
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (3724 buckets, 29792 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>i2c_adapter i2c-0: lm85: Detected SMSC chip
>i2c_adapter i2c-0: lm85: Unrecognized version/stepping 0x68 Defaulting to Generic LM85.
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bridge firewalling registered
>device peth2 entered promiscuous mode
>eth2: port 1(peth2) entering learning state
>eth2: topology change detected, propagating
>eth2: port 1(peth2) entering forwarding state
>virbr0: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>eth2: no IPv6 routers present
>peth2: no IPv6 routers present
>PPP generic driver version 2.4.2
>hub 4-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
>usb 4-2: USB disconnect, address 2
>peth2: unregister 'cdc_ether' usb-0000:00:1d.3-2, CDC Ethernet Device
>eth2: port 1(peth2) entering disabled state
>device peth2 left promiscuous mode
>eth2: port 1(peth2) entering disabled state
>usb 4-2: new full speed USB device using uhci_hcd and address 3
>usb 4-2: configuration #2 chosen from 2 choices
>eth3: register 'cdc_ether' at usb-0000:00:1d.3-2, CDC Ethernet Device, 00:08:5c:5b:f4:13
>usb 4-2: USB disconnect, address 3
>eth3: unregister 'cdc_ether' usb-0000:00:1d.3-2, CDC Ethernet Device
>usb 4-2: new full speed USB device using uhci_hcd and address 4
>usb 4-2: configuration #2 chosen from 2 choices
>eth3: register 'cdc_ether' at usb-0000:00:1d.3-2, CDC Ethernet Device, 00:08:5c:5b:f4:13
>eth3: no IPv6 routers present

Actions: View

Attachments on bug 314551: 212711 | 221711 | 221721