Attachment 215451 Details for Bug 317831 – dmesg after mouse dies and trying to replug

dmesg after mouse dies and trying to replug

mouse_dmesg (text/plain), 22.97 KB, created by Eric Hokanson on 2007-10-04 05:50:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Eric Hokanson

Created: 2007-10-04 05:50:00 UTC

Size: 22.97 KB

patch

obsolete

>Linux version 2.6.22.7-85.fc7 (kojibuilder@hammer2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Fri Sep 21 19:59:51 EDT 2007
>Command line: ro root=LABEL=/ rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524272) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP 000F7D60, 0014 (r0 Nvidia)
>ACPI: RSDT 7FFF3040, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
>ACPI: FACP 7FFF30C0, 0074 (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
>ACPI: DSDT 7FFF3180, 69BC (r1 NVIDIA AWRDACPI     1000 MSFT  3000000)
>ACPI: FACS 7FFF0000, 0040
>ACPI: HPET 7FFF9C40, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA       98)
>ACPI: WDRT 7FFF9CC0, 0047 (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
>ACPI: MCFG 7FFF9D80, 003C (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
>ACPI: APIC 7FFF9B80, 007C (r1 Nvidia NVDAACPI 42302E31 NVDA        0)
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007fff0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524272) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007fff0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   524272
>On node 0 totalpages: 524175
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1317 pages reserved
>  DMA zone: 2626 pages, LIFO batch:0
>  DMA32 zone: 7111 pages used for memmap
>  DMA32 zone: 513065 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x10de8201 base: 0xfeff0000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 40968 bytes of per cpu data
>Built 1 zonelists.  Total pages: 515691
>Kernel command line: ro root=LABEL=/ rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 2511.575 MHz processor.
>Console: colour VGA+ 80x25
>Checking aperture...
>CPU 0: aperture @ 5e000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 2059412k/2097088k available (2366k kernel code, 37288k reserved, 1400k data, 312k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 5026.32 BogoMIPS (lpj=2513163)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 12557873
>Detected 12.557 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5023.29 BogoMIPS (lpj=2511647)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 01
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2048 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000 - efffffff
>PCI: No mmconfig possible on device 00:18
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:0e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LXV5] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LXV6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LXV7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LXV8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSA0] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LSA1] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [AXV5] (IRQs 16) *0
>ACPI: PCI Interrupt Link [AXV6] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AXV7] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AXV8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AMA1] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AMAC] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AACI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AMCI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [ASMB] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AUS2] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AIDE] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [ASA0] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [ASA1] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
>hpet0: 3 32-bit timers, 25000000 Hz
>ACPI: RTC can wake from S4
>pnp: 00:00: ioport range 0x1000-0x107f has been reserved
>pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:00: ioport range 0x1400-0x147f has been reserved
>pnp: 00:00: ioport range 0x1480-0x14ff has been reserved
>pnp: 00:00: ioport range 0x1800-0x187f has been reserved
>pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
>pnp: 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0a: iomem range 0xd0000-0xd3fff has been reserved
>pnp: 00:0a: iomem range 0xd5800-0xd7fff has been reserved
>pnp: 00:0a: iomem range 0xf0000-0xfbfff could not be reserved
>pnp: 00:0a: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:04.0
>  IO window: 9000-9fff
>  MEM window: dc000000-deffffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bridge: 0000:00:0e.0
>  IO window: 8000-8fff
>  MEM window: dfe00000-dfefffff
>  PREFETCH window: dfd00000-dfdfffff
>PCI: Bridge: 0000:00:12.0
>  IO window: 7000-7fff
>  MEM window: dfc00000-dfcfffff
>  PREFETCH window: dfb00000-dfbfffff
>PCI: Bridge: 0000:00:16.0
>  IO window: 6000-6fff
>  MEM window: dfa00000-dfafffff
>  PREFETCH window: df900000-df9fffff
>PCI: Bridge: 0000:00:17.0
>  IO window: 5000-5fff
>  MEM window: df800000-df8fffff
>  PREFETCH window: df700000-df7fffff
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>PCI: Setting latency timer of device 0000:00:12.0 to 64
>PCI: Setting latency timer of device 0000:00:16.0 to 64
>PCI: Setting latency timer of device 0000:00:17.0 to 64
>NET: Registered protocol family 2
>Time: hpet clocksource has been installed.
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3130k freed
>audit: initializing netlink socket (disabled)
>audit(1191447996.471:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key E58690307B14E0E0
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>Allocate Port Service[0000:00:04.0:pcie03]
>PCI: Setting latency timer of device 0000:00:12.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:12.0:pcie00]
>Allocate Port Service[0000:00:12.0:pcie03]
>PCI: Setting latency timer of device 0000:00:16.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:16.0:pcie00]
>Allocate Port Service[0000:00:16.0:pcie03]
>PCI: Setting latency timer of device 0000:00:17.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:17.0:pcie00]
>Allocate Port Service[0000:00:17.0:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI: Thermal Zone [THRM] (40 C)
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ processors (version 2.00.00)
>powernow-k8: MP systems not supported by PSB BIOS structure
>powernow-k8: MP systems not supported by PSB BIOS structure
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 312k freed
>Write protecting the kernel read-only data: 1060k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [AUBA] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>ohci_hcd 0000:00:0a.0: OHCI Host Controller
>ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0a.0: irq 23, io mem 0xdffff000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ACPI: PCI Interrupt Link [AUS2] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [AUS2] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:0a.1 to 64
>ehci_hcd 0000:00:0a.1: EHCI Host Controller
>ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:0a.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:0a.1
>ehci_hcd 0000:00:0a.1: irq 22, io mem 0xdfffe000
>ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>sata_nv 0000:00:0d.0: version 3.4
>ACPI: PCI Interrupt Link [ASA0] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [ASA0] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001dc00 irq 21
>ata2: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001dc08 irq 21
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: Maxtor 6L200S0, BANC1G10, max UDMA/133
>ata1.00: 398297088 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6L200S0   BANC PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors (203928 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors (203928 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 < sda5 sda6 > sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>ACPI: PCI Interrupt Link [ASA1] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:0d.1[B] -> Link [ASA1] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:0d.1 to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x00000000000109e0 ctl 0x0000000000010be2 bmdma 0x000000000001c800 irq 20
>ata4: SATA max UDMA/133 cmd 0x0000000000010960 ctl 0x0000000000010b62 bmdma 0x000000000001c808 irq 20
>usb 1-5: new low speed USB device using ohci_hcd and address 2
>usb 1-5: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0a.0-5
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB02, max UDMA/33
>ata3.00: applying bridge limits
>usb 1-6: new low speed USB device using ohci_hcd and address 3
>ata3.00: configured for UDMA/33
>usb 1-6: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /class/input/input2
>input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:0a.0-6
>input: Logitech USB Receiver as /class/input/input3
>input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:0a.0-6
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 2:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S183L SB02 PQ: 0 ANSI: 5
>ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0d.2[C] -> Link [ASA2] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0d.2 to 64
>scsi4 : sata_nv
>scsi5 : sata_nv
>ata5: SATA max UDMA/133 cmd 0x000000000001c400 ctl 0x000000000001c002 bmdma 0x000000000001b400 irq 23
>ata6: SATA max UDMA/133 cmd 0x000000000001bc00 ctl 0x000000000001b802 bmdma 0x000000000001b408 irq 23
>usb 1-9: new full speed USB device using ohci_hcd and address 4
>usb 1-9: configuration #1 chosen from 1 choice
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>pata_amd 0000:00:0c.0: version 0.3.8
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>scsi6 : pata_amd
>scsi7 : pata_amd
>ata7: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f000 irq 14
>ata8: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f008 irq 15
>ata7.00: ATA-5: WDC WD400BB-00DEA0, 05.03E05, max UDMA/100
>ata7.00: 78165360 sectors, multi 16: LBA 
>ata7.00: configured for UDMA/100
>ata8: port disabled. ignoring.
>scsi 6:0:0:0: Direct-Access     ATA      WDC WD400BB-00DE 05.0 PQ: 0 ANSI: 5
>sd 6:0:0:0: [sdb] 78165360 512-byte hardware sectors (40021 MB)
>sd 6:0:0:0: [sdb] Write Protect is off
>sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 6:0:0:0: [sdb] 78165360 512-byte hardware sectors (40021 MB)
>sd 6:0:0:0: [sdb] Write Protect is off
>sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 6:0:0:0: [sdb] Attached SCSI disk
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1191448013.184:2): selinux=0 auid=4294967295
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 2:0:0:0: Attached scsi generic sg1 type 5
>sd 6:0:0:0: Attached scsi generic sg2 type 0
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0xf800
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400
>Loaded prism54 driver, version 1.2
>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
>ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
>prism54: pci_set_mwi(pdev) succeeded
>sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>ACPI: PCI Interrupt Link [AMAC] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [AMAC] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>forcedeth: using HIGHDMA
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>eth1: forcedeth.c: subsystem: 0105b:0d06 bound to 0000:00:10.0
>ACPI: PCI Interrupt Link [AMA1] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [AMA1] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:11.0 to 64
>forcedeth: using HIGHDMA
>nvidia: module license 'NVIDIA' taints kernel.
>eth2: forcedeth.c: subsystem: 0105b:0d06 bound to 0000:00:11.0
>ACPI: PCI Interrupt Link [AXV5] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [AXV5] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  100.14.19  Wed Sep 12 14:08:38 PDT 2007
>ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:08.0 to 64
>firewire_ohci: Added fw-ohci device 0000:02:08.0, OHCI version 1.10
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:02:0a.0 to 64
>Audigy2 value: Special config.
>firewire_core: created new fw device fw0 (0 config rom retries)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda6, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 979956k swap on /dev/sda2.  Priority:-1 extents:1 across:979956k
>audit(1191469635.882:3): audit_pid=2037 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>eth1: no IPv6 routers present
>Bridge firewalling registered
>virbr0: no IPv6 routers present
>vnet0: no IPv6 routers present
>cdrom: sr0: mrw address space DMA selected
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISOFS: changing to secondary root
>usb 1-5: USB disconnect, address 2
>ohci_hcd 0000:00:0a.0: IRQ INTR_SF lossage
>ohci_hcd 0000:00:0a.0: leak ed ffff81007eb07190 (#81) state 0 (has tds)

Actions: View

Attachments on bug 317831: 215451 | 215461 | 215471