Attachment 218091 Details for Bug 320931 – dmesg

dmesg

dmesg.txt (text/plain), 36.48 KB, created by Per Thomas Jahr on 2007-10-05 21:59:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Per Thomas Jahr

Created: 2007-10-05 21:59:57 UTC

Size: 36.48 KB

patch

obsolete

>Linux version 2.6.23-0.214.rc8.git2.fc8 (kojibuilder@) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-28)) #1 SMP Fri Sep 28 17:38:00 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007e790000 (usable)
> BIOS-e820: 000000007e790000 - 000000007e79e000 (ACPI data)
> BIOS-e820: 000000007e79e000 - 000000007e7e0000 (ACPI NVS)
> BIOS-e820: 000000007e7e0000 - 000000007e800000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>1127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 518032) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   518032
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   518032
>On node 0 totalpages: 518032
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4040 pages, LIFO batch:0
>  Normal zone: 3080 pages used for memmap
>  Normal zone: 222200 pages, LIFO batch:31
>  HighMem zone: 3946 pages used for memmap
>  HighMem zone: 284710 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000FAD70, 0014 (r0 ACPIAM)
>ACPI: RSDT 7E790000, 0048 (r1 MSTEST TESTONLY  6000711 MSFT       97)
>ACPI: FACP 7E790200, 0084 (r2 MSTEST OEMFACP   6000711 MSFT       97)
>ACPI: DSDT 7E7905C0, 9C85 (r1  A0579 A0579000        0 INTL 20060113)
>ACPI: FACS 7E79E000, 0040
>ACPI: APIC 7E790390, 006C (r1 MSTEST OEMAPIC   6000711 MSFT       97)
>ACPI: MCFG 7E790400, 003C (r1 MSTEST OEMMCFG   6000711 MSFT       97)
>ACPI: OEMB 7E79E040, 007B (r1 MSTEST AMI_OEM   6000711 MSFT       97)
>ACPI: HPET 7E79A250, 0038 (r1 MSTEST OEMHPET   6000711 MSFT       97)
>ACPI: ASF! 7E79A288, 0099 (r32 LEGEND I865PASF        1 INTL 20060113)
>ACPI: GSCI 7E79E0C0, 2024 (r1 MSTEST GMCHSCI   6000711 MSFT       97)
>ACPI: SSDT 7E7A00F0, 01BF (r1    AMI   CPU1PM        1 INTL 20060113)
>ACPI: SSDT 7E7A02B0, 0133 (r1    AMI   CPU2PM        1 INTL 20060113)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a202 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 80000000 (gap: 7e800000:80600000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
>swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 510950
>Kernel command line: initrd=initrd.img root=CDLABEL=Fedora-7.92-Live-i386 rootfstype=iso9660 ro quiet liveimg rhgb  BOOT_IMAGE=vmlinuz 
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0810000 soft=c07f0000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2133.383 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1024 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2029508k/2072128k available (2266k kernel code, 41360k reserved, 1163k data, 568k init, 1154624k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc075f000 - 0xc07ed000   ( 568 kB)
>      .data : 0xc0636bbf - 0xc0759a44   (1163 kB)
>      .text : 0xc0400000 - 0xc0636bbf   (2266 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4270.48 BogoMIPS (lpj=2135243)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz stepping 06
>lockdep: not fixing up alternatives.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0811000 soft=c07f1000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4266.66 BogoMIPS (lpj=2133332)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz stepping 06
>Total of 2 processors activated (8537.15 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=604 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=856 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=3376 bytes
>khelper used greatest stack depth: 3160 bytes left
>Booting paravirtualized kernel on bare hardware
>khelper used greatest stack depth: 3084 bytes left
>Time: 21:20:16  Date: 09/05/107
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  81, should be 78 [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
>pnp: 00:08: ioport range 0x290-0x297 has been reserved
>pnp: 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
>pnp: 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
>pnp: 00:09: iomem range 0xff9fa000-0xff9fafff has been reserved
>pnp: 00:09: iomem range 0xfff00000-0xfffffffe could not be reserved
>pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
>pnp: 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
>pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0d: iomem range 0xc0000-0xcffff could not be reserved
>pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0d: iomem range 0x100000-0x7e7fffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: bfd00000-bfdfffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: bfe00000-bfefffff
>PCI: Bridge: 0000:00:1c.4
>  IO window: a000-afff
>  MEM window: ff600000-ff6fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: b000-bfff
>  MEM window: ff700000-ff7fffff
>  PREFETCH window: 80000000-800fffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 65536 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs...<6>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
> it is
>Freeing initrd memory: 4523k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1191619215.803:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>khelper used greatest stack depth: 2880 bytes left
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key C5D13217BADC3CCB
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 965G Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 11:897:347
>  hash matches device pci0000:00
>Freeing unused kernel memory: 568k freed
>Write protecting the kernel read-only data: 864k
>mount used greatest stack depth: 2816 bytes left
>mknod used greatest stack depth: 2780 bytes left
>mount used greatest stack depth: 2560 bytes left
>SCSI subsystem initialized
>modprobe used greatest stack depth: 2296 bytes left
>loop: module loaded
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>libata version 2.21 loaded.
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000dc00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000d400
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000d800
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 20, io mem 0xff9fb800
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3<4>modprobe used greatest stack depth: 1868 bytes left
> ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x0001e880 ctl 0x0001e802 bmdma 0x0001e080 irq 19
>ata2: SATA max UDMA/133 cmd 0x0001e480 ctl 0x0001e402 bmdma 0x0001e088 irq 19
>ata1.00: ATA-7: SAMSUNG HD401LJ, ZZ100-15, max UDMA7
>ata1.00: 781422768 sectors, multi 16: LBA48 NCQ (not used)
>ata1.00: configured for UDMA/133
>usb 2-1: device not accepting address 2, error -71
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD401LJ  ZZ10 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x0001d080 ctl 0x0001d002 bmdma 0x0001c800 irq 19
>ata4: SATA max UDMA/133 cmd 0x0001cc00 ctl 0x0001c882 bmdma 0x0001c808 irq 19
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>ahci 0000:02:00.0: version 2.3
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 18, io mem 0xff9fb400
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>usb 3-1: device descriptor read/all, error -71
>usb 2-1: new full speed USB device using uhci_hcd and address 4
>usb 2-1: configuration #1 chosen from 1 choice
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 4 ports detected
>ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>scsi4 : ahci
>scsi5 : ahci
>ata5: SATA max UDMA/133 cmd 0xf8934100 ctl 0x00000000 bmdma 0x00000000 irq 16
>ata6: SATA max UDMA/133 cmd 0xf8934180 ctl 0x00000000 bmdma 0x00000000 irq 16
>usb 3-1: new full speed USB device using uhci_hcd and address 4
>ata5: SATA link down (SStatus 0 SControl 300)
>usb 3-1: configuration #1 chosen from 1 choice
>hub 3-1:1.0: USB hub found
>hub 3-1:1.0: 3 ports detected
>ata6: SATA link down (SStatus 0 SControl 300)
>PCI: Enabling device 0000:02:00.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:02:00.1 to 64
>scsi6 : pata_jmicron
>scsi7 : pata_jmicron
>ata7: PATA max UDMA/100 cmd 0x0001ac00 ctl 0x0001a882 bmdma 0x0001a400 irq 17
>ata8: PATA max UDMA/100 cmd 0x0001a800 ctl 0x0001a482 bmdma 0x0001a408 irq 17
>usb 2-1.2: new low speed USB device using uhci_hcd and address 5
>usb 2-1.2: configuration #1 chosen from 1 choice
>input: Contour Design ShuttlePRO v2 as /class/input/input1
>input: USB HID v1.10 Device [Contour Design ShuttlePRO v2] on usb-0000:00:1a.1-1.2
>ata7.00: ATAPI: _NEC DVD_RW ND-3540A, 1.01, max UDMA/33
>usb 2-1.3: new low speed USB device using uhci_hcd and address 6
>ata7.00: configured for UDMA/33
>usb 2-1.3: configuration #1 chosen from 1 choice
>input: Mitsumi Electric Apple Optical USB Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [Mitsumi Electric Apple Optical USB Mouse] on usb-0000:00:1a.1-1.3
>scsi 6:0:0:0: CD-ROM            _NEC     DVD_RW ND-3540A  1.01 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 6:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 22 (level, low) -> IRQ 21
>ohci_hcd 0000:04:01.0: OHCI Host Controller
>ohci_hcd 0000:04:01.0: new USB bus registered, assigned bus number 8
>ohci_hcd 0000:04:01.0: irq 21, io mem 0xff7fd000
>modprobe used greatest stack depth: 1520 bytes left
>sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb 2-1.4: new full speed USB device using uhci_hcd and address 7
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 3 ports detected
>usb 2-1.4: configuration #1 chosen from 1 choice
>ACPI: PCI Interrupt 0000:04:01.1[B] -> GSI 23 (level, low) -> IRQ 18
>ohci_hcd 0000:04:01.1: OHCI Host Controller
>ohci_hcd 0000:04:01.1: new USB bus registered, assigned bus number 9
>ohci_hcd 0000:04:01.1: irq 18, io mem 0xff7fe000
>usb usb9: configuration #1 chosen from 1 choice
>hub 9-0:1.0: USB hub found
>hub 9-0:1.0: 2 ports detected
>usb 3-1.2: new full speed USB device using uhci_hcd and address 5
>ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 21 (level, low) -> IRQ 22
>firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI version 1.10
>ACPI: PCI Interrupt 0000:04:01.2[C] -> GSI 20 (level, low) -> IRQ 23
>ehci_hcd 0000:04:01.2: EHCI Host Controller
>ehci_hcd 0000:04:01.2: new USB bus registered, assigned bus number 10
>ehci_hcd 0000:04:01.2: irq 23, io mem 0xff7ffc00
>ehci_hcd 0000:04:01.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb10: configuration #1 chosen from 1 choice
>hub 10-0:1.0: USB hub found
>hub 10-0:1.0: 5 ports detected
>usb 3-1.2: configuration #1 chosen from 1 choice
>input: Logitech Logitech BT Mini-Receiver as /class/input/input3
>input: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.0-1.2
>usb 3-1.3: new full speed USB device using uhci_hcd and address 6
>ISO 9660 Extensions: Microsoft Joliet Level 3
>Unable to load NLS charset utf8
>Unable to load NLS charset utf8
>ISO 9660 Extensions: RRIP_1991A
>mount used greatest stack depth: 1152 bytes left
>usb 3-1.3: configuration #1 chosen from 1 choice
>input: Logitech Logitech BT Mini-Receiver as /class/input/input4
>input,hiddev96: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.0-1.3
>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 10-1: new high speed USB device using ehci_hcd and address 2
>usb 10-1: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi8 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb 8-2: new full speed USB device using ohci_hcd and address 2
>usb 8-2: configuration #1 chosen from 1 choice
>usb 9-2: new full speed USB device using ohci_hcd and address 2
>usb 9-2: configuration #1 chosen from 1 choice
>input: Logitech Logitech USB Headset as /class/input/input5
>input: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:04:01.1-2
>audit(1191619223.815:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  8 users, 11 roles, 2284 types, 107 bools, 1 sens, 1024 cats
>security:  67 classes, 227389 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=522
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=194
>inode_doinit_with_dentry:  no dentry for dev=dm-0 ino=193
>SELinux: initialized (dev loop2, type squashfs), not configured for labeling
>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1191619224.981:3): policy loaded auid=4294967295
>usb-storage: device scan complete
>scsi 8:0:0:0: Direct-Access     Lexar    Media Inc. CF    019D PQ: 0 ANSI: 0 CCS
>scsi 8:0:0:1: Direct-Access     Lexar    Media Inc. SD    019D PQ: 0 ANSI: 0 CCS
>scsi 8:0:0:2: Direct-Access     Lexar    Media Inc. SM/xD 019D PQ: 0 ANSI: 0 CCS
>scsi 8:0:0:3: Direct-Access     Lexar    Media Inc. MS    019D PQ: 0 ANSI: 0 CCS
>sd 8:0:0:0: [sdb] Attached SCSI removable disk
>sd 8:0:0:1: [sdc] Attached SCSI removable disk
>sd 8:0:0:2: [sdd] Attached SCSI removable disk
>sd 8:0:0:3: [sde] Attached SCSI removable disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 6:0:0:0: Attached scsi generic sg1 type 5
>sd 8:0:0:0: Attached scsi generic sg2 type 0
>sd 8:0:0:1: Attached scsi generic sg3 type 0
>sd 8:0:0:2: Attached scsi generic sg4 type 0
>sd 8:0:0:3: Attached scsi generic sg5 type 0
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>input: Power Button (FF) as /class/input/input6
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input7
>ACPI: Power Button (CM) [PWRB]
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 19 (level, low) -> IRQ 19
>skge 1.11 addr 0xff7f8000 irq 19 chip Yukon-Lite rev 9
>skge eth0: addr 00:1b:fc:9e:08:34
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>Linux video capture interface: v2.00
>PCI: Enabling device 0000:00:1f.3 (0001 -> 0003)
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 20
>usbcore: registered new interface driver snd-usb-audio
>saa7130/34: v4l2 driver version 0.2.14 loaded
>ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 23 (level, low) -> IRQ 18
>saa7133[0]: found at 0000:04:02.0, rev: 209, irq: 18, latency: 64, mmio: 0xff7ff000
>saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
>saa7133[0]: board init: gpio is 6400000
>input: HVR 1110 as /class/input/input8
>ir-kbd-i2c: HVR 1110 detected at i2c-1/1-0071/ir0 [saa7133[0]]
>saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
>saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
>saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>tuner 1-004b: chip found @ 0x96 (saa7133[0])
>tuner 1-004b: setting tuner address to 61
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>tuner 1-004b: type set to tda8290+75a
>hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
>tuner 1-004b: setting tuner address to 61
>tuner 1-004b: type set to tda8290+75a
>saa7133[0]: registered device video0 [v4l2]
>saa7133[0]: registered device vbi0
>saa7133[0]: registered device radio0
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 21 (level, low) -> IRQ 22
>Consumer PCM code does not work well at the moment --jk
>DVB: registering new adapter (saa7133[0])
>DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
>tda1004x: setting up plls for 48MHz sampling clock
>Floppy drive(s): fd0 is 1.44M
>tda1004x: found firmware revision 20 -- ok
>FDC 0 is a post-1991 82077
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>audit(1191633679.030:4): audit_pid=2741 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>WARNING: at drivers/hid/hid-core.c:784 implement() (Not tainted)
> [<c0406463>] show_trace_log_lvl+0x1a/0x2f
> [<c0406e4d>] show_trace+0x12/0x14
> [<c0406e65>] dump_stack+0x16/0x18
> [<c05b7239>] hid_output_report+0x22b/0x2c3
> [<c05bb9ce>] hid_submit_ctrl+0x57/0x1cf
> [<c05bbc8b>] usbhid_submit_report+0x145/0x168
> [<c05bdf06>] hiddev_ioctl+0x360/0x8d6
> [<c04942d1>] do_ioctl+0x51/0x68
> [<c0494531>] vfs_ioctl+0x249/0x25c
> [<c049458d>] sys_ioctl+0x49/0x64
> [<c040522e>] syscall_call+0x7/0xb
> =======================
>WARNING: at drivers/hid/hid-core.c:784 implement() (Not tainted)
> [<c0406463>] show_trace_log_lvl+0x1a/0x2f
> [<c0406e4d>] show_trace+0x12/0x14
> [<c0406e65>] dump_stack+0x16/0x18
> [<c05b7239>] hid_output_report+0x22b/0x2c3
> [<c05bb9ce>] hid_submit_ctrl+0x57/0x1cf
> [<c05bbc8b>] usbhid_submit_report+0x145/0x168
> [<c05bdf06>] hiddev_ioctl+0x360/0x8d6
> [<c04942d1>] do_ioctl+0x51/0x68
> [<c0494531>] vfs_ioctl+0x249/0x25c
> [<c049458d>] sys_ioctl+0x49/0x64
> [<c040522e>] syscall_call+0x7/0xb
> =======================
>WARNING: at drivers/hid/hid-core.c:784 implement() (Not tainted)
> [<c0406463>] show_trace_log_lvl+0x1a/0x2f
> [<c0406e4d>] show_trace+0x12/0x14
> [<c0406e65>] dump_stack+0x16/0x18
> [<c05b7239>] hid_output_report+0x22b/0x2c3
> [<c05bb9ce>] hid_submit_ctrl+0x57/0x1cf
> [<c05bbc8b>] usbhid_submit_report+0x145/0x168
> [<c05bdf06>] hiddev_ioctl+0x360/0x8d6
> [<c04942d1>] do_ioctl+0x51/0x68
> [<c0494531>] vfs_ioctl+0x249/0x25c
> [<c049458d>] sys_ioctl+0x49/0x64
> [<c040522e>] syscall_call+0x7/0xb
> =======================
>WARNING: at drivers/hid/hid-core.c:784 implement() (Not tainted)
> [<c0406463>] show_trace_log_lvl+0x1a/0x2f
> [<c0406e4d>] show_trace+0x12/0x14
> [<c0406e65>] dump_stack+0x16/0x18
> [<c05b7239>] hid_output_report+0x22b/0x2c3
> [<c05bb9ce>] hid_submit_ctrl+0x57/0x1cf
> [<c05bbc8b>] usbhid_submit_report+0x145/0x168
> [<c05bdf06>] hiddev_ioctl+0x360/0x8d6
> [<c04942d1>] do_ioctl+0x51/0x68
> [<c0494531>] vfs_ioctl+0x249/0x25c
> [<c049458d>] sys_ioctl+0x49/0x64
> [<c040522e>] syscall_call+0x7/0xb
> =======================
>WARNING: at drivers/hid/hid-core.c:784 implement() (Not tainted)
> [<c0406463>] show_trace_log_lvl+0x1a/0x2f
> [<c0406e4d>] show_trace+0x12/0x14
> [<c0406e65>] dump_stack+0x16/0x18
> [<c05b7239>] hid_output_report+0x22b/0x2c3
> [<c05bb9ce>] hid_submit_ctrl+0x57/0x1cf
> [<c05bbc8b>] usbhid_submit_report+0x145/0x168
> [<c05bdf06>] hiddev_ioctl+0x360/0x8d6
> [<c04942d1>] do_ioctl+0x51/0x68
> [<c0494531>] vfs_ioctl+0x249/0x25c
> [<c049458d>] sys_ioctl+0x49/0x64
> [<c040522e>] syscall_call+0x7/0xb
> =======================
>WARNING: at drivers/hid/hid-core.c:784 implement() (Not tainted)
> [<c0406463>] show_trace_log_lvl+0x1a/0x2f
> [<c0406e4d>] show_trace+0x12/0x14
> [<c0406e65>] dump_stack+0x16/0x18
> [<c05b7239>] hid_output_report+0x22b/0x2c3
> [<c05bb9ce>] hid_submit_ctrl+0x57/0x1cf
> [<c05bbc8b>] usbhid_submit_report+0x145/0x168
> [<c05bdf06>] hiddev_ioctl+0x360/0x8d6
> [<c04942d1>] do_ioctl+0x51/0x68
> [<c0494531>] vfs_ioctl+0x249/0x25c
> [<c049458d>] sys_ioctl+0x49/0x64
> [<c040522e>] syscall_call+0x7/0xb
> =======================
>WARNING: at drivers/hid/hid-core.c:784 implement() (Not tainted)
> [<c0406463>] show_trace_log_lvl+0x1a/0x2f
> [<c0406e4d>] show_trace+0x12/0x14
> [<c0406e65>] dump_stack+0x16/0x18
> [<c05b7239>] hid_output_report+0x22b/0x2c3
> [<c05bb9ce>] hid_submit_ctrl+0x57/0x1cf
> [<c05bbc8b>] usbhid_submit_report+0x145/0x168
> [<c05bdf06>] hiddev_ioctl+0x360/0x8d6
> [<c04942d1>] do_ioctl+0x51/0x68
> [<c0494531>] vfs_ioctl+0x249/0x25c
> [<c049458d>] sys_ioctl+0x49/0x64
> [<c040522e>] syscall_call+0x7/0xb
> =======================
>WARNING: at drivers/hid/hid-core.c:784 implement() (Not tainted)
> [<c0406463>] show_trace_log_lvl+0x1a/0x2f
> [<c0406e4d>] show_trace+0x12/0x14
> [<c0406e65>] dump_stack+0x16/0x18
> [<c05b7239>] hid_output_report+0x22b/0x2c3
> [<c05bb9ce>] hid_submit_ctrl+0x57/0x1cf
> [<c05bbc8b>] usbhid_submit_report+0x145/0x168
> [<c05bdf06>] hiddev_ioctl+0x360/0x8d6
> [<c04942d1>] do_ioctl+0x51/0x68
> [<c0494531>] vfs_ioctl+0x249/0x25c
> [<c049458d>] sys_ioctl+0x49/0x64
> [<c040522e>] syscall_call+0x7/0xb
> =======================
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>usb 3-1.1: new full speed USB device using uhci_hcd and address 7
>usb 3-1.1: configuration #1 chosen from 1 choice
>skge eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>skge eth0: Link is up at 100 Mbps, full duplex, flow control both
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>eth0: no IPv6 routers present
>usb 3-1: USB disconnect, address 4
>usb 3-1.1: USB disconnect, address 7
>usb 3-1.2: USB disconnect, address 5
>usb 3-1.3: USB disconnect, address 6
>usb 3-1: new full speed USB device using uhci_hcd and address 8
>usb 3-1: configuration #1 chosen from 1 choice
>hub 3-1:1.0: USB hub found
>hub 3-1:1.0: 3 ports detected
>usb 3-1.2: new full speed USB device using uhci_hcd and address 9
>usb 3-1.2: configuration #1 chosen from 1 choice
>input: Logitech Logitech BT Mini-Receiver as /class/input/input9
>input: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.0-1.2
>usb 3-1.3: new full speed USB device using uhci_hcd and address 10
>usb 3-1.3: configuration #1 chosen from 1 choice
>input: Logitech Logitech BT Mini-Receiver as /class/input/input10
>input,hiddev96: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.0-1.3

Actions: View

Attachments on bug 320931: 218091