Attachment 219951 Details for Bug 323411 – dmesg output

dmesg output

dmesg.txt (text/plain), 23.87 KB, created by Pat Kane on 2007-10-08 17:34:48 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Pat Kane

Created: 2007-10-08 17:34:48 UTC

Size: 23.87 KB

patch

obsolete

>Linux version 2.6.23-0.222.rc9.git4.fc8 (kojibuilder@) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-31)) #1 SMP Sat Oct 6 13:53:58 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ffae000 (usable)
> BIOS-e820: 000000001ffae000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 130990) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   130990
>  HighMem    130990 ->   130990
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   130990
>On node 0 totalpages: 130990
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4040 pages, LIFO batch:0
>  Normal zone: 1734 pages used for memmap
>  Normal zone: 125160 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FDF00, 0014 (r0 DELL  )
>ACPI: RSDT 1FFF0000, 0028 (r1 DELL    CPi R   27D5061E ASL        61)
>ACPI: FACP 1FFF0400, 0074 (r1 DELL    CPi R   27D5061E ASL        61)
>ACPI: DSDT 1FFF0C00, 2E13 (r1 INT430 SYSFexxx     1001 MSFT  100000E)
>ACPI: FACS 1FFFF800, 0040
>ACPI: PM-Timer IO Port: 0x808
>Allocating PCI resources starting at 30000000 (gap: 20000000:deda0000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 129200
>Kernel command line: ro root=LABEL=/1 rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffb000 (01758000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0814000 soft=c07f4000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 1398.831 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1024 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 505632k/523960k available (2271k kernel code, 17784k reserved, 1175k data, 568k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
>    lowmem  : 0xc0000000 - 0xdffae000   ( 511 MB)
>      .init : 0xc0763000 - 0xc07f1000   ( 568 kB)
>      .data : 0xc0637dd7 - 0xc075da44   (1175 kB)
>      .text : 0xc0400000 - 0xc0637dd7   (2271 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 2800.16 BogoMIPS (lpj=1400083)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU: After all inits, caps: a7e9f1bf 00000000 00000000 00002040 00000180 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0800)
>CPU0: Intel(R) Pentium(R) M processor 1400MHz stepping 05
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=604 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=856 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=3376 bytes
>khelper used greatest stack depth: 3160 bytes left
>Booting paravirtualized kernel on bare hardware
>khelper used greatest stack depth: 3084 bytes left
>Time: 11:25:21  Date: 09/08/107
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver 
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfc96e, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>Force enabled HPET at base address 0xfed00000
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved
>pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved
>pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:02: ioport range 0x800-0x805 has been reserved
>pnp: 00:02: ioport range 0x808-0x80f has been reserved
>pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
>pnp: 00:03: ioport range 0x806-0x807 has been reserved
>pnp: 00:03: ioport range 0x810-0x85f has been reserved
>pnp: 00:03: ioport range 0x860-0x87f has been reserved
>pnp: 00:03: ioport range 0x880-0x8bf has been reserved
>pnp: 00:03: ioport range 0x8c0-0x8df has been reserved
>pnp: 00:08: ioport range 0x900-0x97f has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: fc000000-fdffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bus 3, cardbus bridge: 0000:02:01.0
>  IO window: 0000d000-0000d0ff
>  IO window: 0000d400-0000d4ff
>  PREFETCH window: 30000000-33ffffff
>  MEM window: 38000000-3bffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-efff
>  MEM window: f6000000-fbffffff
>  PREFETCH window: 30000000-33ffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 7, 655360 bytes)
>TCP bind hash table entries: 16384 (order: 7, 589824 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 2916k freed
>khelper used greatest stack depth: 2956 bytes left
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1191842720.968:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 4961170A4469D9B5
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Thermal Zone [THM] (53 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 855PM Chipset.
>agpgart: AGP aperture is 128M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:02:01.0 [1028:016a]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:01.0, mfunc 0x012c1202, devctl 0x64
>Yenta: ISA IRQ mask 0x04d8, PCI irq 11
>Socket status: 30000086
>Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
>pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
>cs: IO port probe 0xd000-0xefff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 11:165:428
>Freeing unused kernel memory: 568k freed
>Write protecting the kernel read-only data: 877k
>Marking TSC unstable due to: TSC halts in idle.
>Time: hpet clocksource has been installed.
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4fffc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>insmod used greatest stack depth: 1876 bytes left
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>input: PS/2 Mouse as /class/input/input2
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>SCSI subsystem initialized
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.1: version 2.12
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
>usb 3-1: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft USB Mouse as /class/input/input4
>input: USB HID v1.10 Mouse [Microsoft Microsoft USB Mouse] on usb-0000:00:1d.1-1
>ata1.00: ATA-6: TOSHIBA MK4025GAS, KA100A, max UDMA/100
>ata1.00: 78140160 sectors, multi 8: LBA 
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4241N, A100, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK4025GA KA10 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4241N A100 PQ: 0 ANSI: 5
>insmod used greatest stack depth: 760 bytes left
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  5 users, 11 roles, 2284 types, 107 bools, 1 sens, 1024 cats
>security:  67 classes, 227364 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1191842728.467:2): policy loaded auid=4294967295
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>intel_rng: FWH not detected
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Battery Slot [BAT1] (battery absent)
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /class/input/input7
>ACPI: Sleep Button (CM) [SBTN]
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
>b44.c:v2.0
>eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0d:56:36:9e:58
>ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
>ipw2100: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
>input: Video Bus as /class/input/input8
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>parport_pc 00:0c: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>firewire_ohci: Added fw-ohci device 0000:02:01.1, OHCI version 1.10
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>intel8x0_measure_ac97_clock: measured 50820 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>MC'97 1 converters and GPIO not ready (0xff00)
>audit(1191842739.681:3): avc:  denied  { read } for  pid=1262 comm="salsa" name="asound.state" dev=sda1 ino=482591 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:var_lib_t:s0 tclass=file
>audit(1191842739.681:4): avc:  denied  { getattr } for  pid=1262 comm="salsa" path="/var/lib/alsa/asound.state" dev=sda1 ino=482591 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:var_lib_t:s0 tclass=file
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>floppy0: no floppy controllers found
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda1, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>Adding 610460k swap on /dev/sda3.  Priority:-1 extents:1 across:610460k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>Clocksource tsc unstable (delta = -137031157 ns)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>audit(1191842761.673:5): avc:  denied  { read write } for  pid=1745 comm="consoletype" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:consoletype_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>audit(1191842761.675:6): avc:  denied  { getattr } for  pid=1745 comm="consoletype" path="/dev/pts/0" dev=devpts ino=2 scontext=system_u:system_r:consoletype_t:s0 tcontext=system_u:object_r:rhgb_devpts_t:s0 tclass=chr_file
>b44: eth0: Link is up at 100 Mbps, full duplex.
>b44: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>audit(1191842765.313:7): audit_pid=1873 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>eth0: no IPv6 routers present
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x1453 pid 0x2000
>usbcore: registered new interface driver usblp
>usblp0: nonzero read bulk status received: -84
>usblp0: nonzero write bulk status received: -71
>usblp0: error -71 reading printer status
>usb 2-1: USB disconnect, address 2
>usblp0: removed
>usb 3-1: USB disconnect, address 2
>b44: eth0: Link is down.
>firewire_core: created new fw device fw1 (0 config rom retries, S400)
>firewire_core: phy config: card 0, new root=ffc1, gap_count=5
>
>=============================================
>[ INFO: possible recursive locking detected ]
>2.6.23-0.222.rc9.git4.fc8 #1
>---------------------------------------------
>X/2522 is trying to acquire lock:
> (&q->lock){++..}, at: [<c042671c>] __wake_up+0x15/0x42
>
>but task is already holding lock:
> (&q->lock){++..}, at: [<c042671c>] __wake_up+0x15/0x42
>
>other info that might help us debug this:
>2 locks held by X/2522:
> #0:  (&client->lock){.+..}, at: [<e0993f51>] queue_event+0x2b/0x68 [firewire_core]
> #1:  (&q->lock){++..}, at: [<c042671c>] __wake_up+0x15/0x42
>
>stack backtrace:
> [<c0406463>] show_trace_log_lvl+0x1a/0x2f
> [<c0406e4d>] show_trace+0x12/0x14
> [<c0406e65>] dump_stack+0x16/0x18
> [<c0449c56>] __lock_acquire+0x189/0xc67
> [<c044abae>] lock_acquire+0x7b/0x9e
> [<c0634712>] _spin_lock_irqsave+0x4a/0x77
> [<c042671c>] __wake_up+0x15/0x42
> [<c04aed7e>] ep_poll_safewake+0x86/0xa8
> [<c04afa05>] ep_poll_callback+0x9f/0xaa
> [<c042483e>] __wake_up_common+0x32/0x55
> [<c0426738>] __wake_up+0x31/0x42
> [<e0993f7d>] queue_event+0x57/0x68 [firewire_core]
> [<e0994a5a>] handle_request+0xd8/0xe0 [firewire_core]
> [<e099269a>] fw_core_handle_request+0x215/0x23c [firewire_core]
> [<e0961c42>] handle_ar_packet+0xd7/0xeb [firewire_ohci]
> [<e0962bac>] ar_context_tasklet+0xb6/0xc4 [firewire_ohci]
> [<c0432b5b>] tasklet_action+0x68/0xd3
> [<c0432a39>] __do_softirq+0x78/0xff
> [<c04075d4>] do_softirq+0x74/0xf7
> =======================

Actions: View

Attachments on bug 323411: 219951 | 222131