Attachment 220081 Details for Bug 309721 – dmesg from kernel-2.6.22.7-85.fc7 after starting X twice

dmesg from kernel-2.6.22.7-85.fc7 after starting X twice

dmesg-2.6.22.7-85.txt (text/plain), 18.26 KB, created by Joshua on 2007-10-08 19:46:46 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Joshua

Created: 2007-10-08 19:46:46 UTC

Size: 18.26 KB

patch

obsolete

>Linux version 2.6.22.7-85.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Fri Sep 21 19:53:05 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>found SMP MP-table at 000f5ae0
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 131056) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   131056
>  HighMem    131056 ->   131056
>early_node_map[1] active PFN ranges
>    0:        0 ->   131056
>On node 0 totalpages: 131056
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 991 pages used for memmap
>  Normal zone: 125969 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP 000F7370, 0014 (r0 ABIT  )
>ACPI: RSDT 1FFF3000, 002C (r1 ABIT   AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 1FFF3040, 0074 (r1 ABIT   AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 1FFF30C0, 23DF (r1 ABIT   AWRDACPI     1000 MSFT  100000C)
>ACPI: FACS 1FFF0000, 0040
>ACPI: APIC 1FFF54C0, 005C (r1 ABIT                   0             0)
>ACPI: DMI BIOS year==0, assuming ACPI-capable machine
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:6 APIC version 17
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:6 APIC version 17
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
>Built 1 zonelists.  Total pages: 130033
>Kernel command line: ro root=LABEL=/8 
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0793000 soft=c0773000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 501.164 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 511820k/524224k available (2111k kernel code, 11760k reserved, 1117k data, 260k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
>    lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
>      .init : 0xc072d000 - 0xc076e000   ( 260 kB)
>      .data : 0xc060fde8 - 0xc0727504   (1117 kB)
>      .text : 0xc0400000 - 0xc060fde8   (2111 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 1002.99 BogoMIPS (lpj=501496)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 128K
>CPU: After all inits, caps: 0183f3ff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel Celeron (Mendocino) stepping 05
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0794000 soft=c0774000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 1002.19 BogoMIPS (lpj=501097)
>CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 128K
>CPU: After all inits, caps: 0183f3ff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Celeron (Mendocino) stepping 05
>Total of 2 processors activated (2005.18 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1536 bytes
>Time: 12:23:52  Date: 10/08/07
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb5c0, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>mtrr: your CPUs had inconsistent fixed MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
>* this clock source is slow. Consider trying other clock sources
>PCI quirk: region 4000-403f claimed by PIIX4 ACPI
>PCI quirk: region 5000-500f claimed by PIIX4 SMB
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 *12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>ACPI: RTC can wake from S4
>pnp: 00:00: iomem range 0xf0000-0xf3fff could not be reserved
>pnp: 00:00: iomem range 0xf4000-0xf7fff could not be reserved
>pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: e0000000-e1ffffff
>  PREFETCH window: d8000000-dfffffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 196608 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
> it is
>Freeing initrd memory: 2831k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1191846232.518:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 5C8CFCE5A817ACD0
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Limiting direct PCI/PCI transfers.
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI: Expecting a [Reference] package element, found type DFFEFAD0
>ACPI: Invalid passive threshold
>ACPI: Thermal Zone [THRM] (38 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Generic RTC Driver v1.07
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 440BX Chipset.
>agpgart: AGP aperture is 128M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 11:718:379
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 260k freed
>Write protecting the kernel read-only data: 864k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:07.2[D] -> GSI 19 (level, low) -> IRQ 16
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 16, io base 0x0000a000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 16 (level, low) -> IRQ 17
>uhci_hcd 0000:00:0f.0: UHCI Host Controller
>uhci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:0f.0: irq 17, io base 0x0000ac00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:0f.1[B] -> GSI 17 (level, low) -> IRQ 18
>uhci_hcd 0000:00:0f.1: UHCI Host Controller
>uhci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:0f.1: irq 18, io base 0x0000b000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new low speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:0f.2[C] -> GSI 18 (level, low) -> IRQ 19
>ehci_hcd 0000:00:0f.2: EHCI Host Controller
>ehci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:0f.2: irq 19, io mem 0xe3000000
>ehci_hcd 0000:00:0f.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 4 ports detected
>usb 1-1: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:07.2-1
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:07.1: version 2.11
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
>ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
>ata1.00: ATA-5: WDC WD1000BB-00CAA0, 16.06V16, max UDMA/100
>ata1.00: 195371568 sectors, multi 16: LBA 
>ata1.01: ATA-5: WDC WD400BB-00AUA1, 18.20D18, max UDMA/100
>ata1.01: 78165360 sectors, multi 16: LBA 
>ata1.00: configured for UDMA/33
>ata1.01: configured for UDMA/33
>ata2.00: ATAPI: LITE-ON DVDRW LDW-411S, FS05, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1000BB-00C 16.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 sda7<6>usb 2-1: new full speed USB device using uhci_hcd and address 2
> sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: Direct-Access     ATA      WDC WD400BB-00AU 18.2 PQ: 0 ANSI: 5
>sd 0:0:1:0: [sdb] 78165360 512-byte hardware sectors (40021 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:1:0: [sdb] 78165360 512-byte hardware sectors (40021 MB)
>sd 0:0:1:0: [sdb] Write Protect is off
>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 0:0:1:0: [sdb] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            LITE-ON  DVDRW LDW-411S   FS05 PQ: 0 ANSI: 5
>usb 2-1: configuration #1 chosen from 1 choice
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1191846241.628:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>scsi 1:0:0:0: Attached scsi generic sg2 type 5
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
>usbcore: registered new interface driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 19 (level, low) -> IRQ 16
>eth0: RealTek RTL8139 at 0xe081a000, 00:e0:29:5b:21:ea, IRQ 16
>eth0:  Identified 8139 chip type 'RTL-8139B'
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 19
>scsi3 : pata_hpt366
>scsi4 : pata_hpt366
>ata3: PATA max UDMA/66 cmd 0x0001b400 ctl 0x0001b802 bmdma 0x0001bc00 irq 19
>ata4: DUMMY
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 18 (level, low) -> IRQ 19
>scsi5 : pata_hpt366
>scsi6 : pata_hpt366
>ata5: PATA max UDMA/66 cmd 0x0001c000 ctl 0x0001c402 bmdma 0x0001c800 irq 19
>ata6: DUMMY
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 18
>No dock devices found.
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access     SanDisk  ImageMate CF-SM  0100 PQ: 0 ANSI: 0 CCS
>scsi 2:0:0:1: Direct-Access     SanDisk  ImageMate CF-SM  0100 PQ: 0 ANSI: 0 CCS
>sd 2:0:0:0: [sdc] Attached SCSI removable disk
>sd 2:0:0:0: Attached scsi generic sg3 type 0
>sd 2:0:0:1: [sdd] Attached SCSI removable disk
>sd 2:0:0:1: Attached scsi generic sg4 type 0
>EXT3 FS on sda8, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda12, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda14, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda15, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 265032k swap on /dev/sda7.  Priority:-1 extents:1 across:265032k
>Adding 265032k swap on /dev/sda11.  Priority:-2 extents:1 across:265032k
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>w83781d: Found a W83782D chip at 0x290
>input: PC Speaker as /class/input/input5
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized radeon 1.27.0 20060524 on minor 0
>agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 2x mode
>[drm] Setting GART location based on new memory map
>[drm] writeback test succeeded in 1 usecs
>mtrr: no MTRR for d8000000,4000000 found
>agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 2x mode
>[drm] Setting GART location based on new memory map
>[drm] writeback test succeeded in 1 usecs

Actions: View

Attachments on bug 309721: 218181 | 220081