Attachment 224431 Details for Bug 239108 – Output of dmesg

Output of dmesg

dmesg.txt (text/plain), 56.39 KB, created by Matěj Cepl on 2007-10-11 15:23:50 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Matěj Cepl

Created: 2007-10-11 15:23:50 UTC

Size: 56.39 KB

patch

obsolete

>Linux version 2.6.23-0.224.rc9.git6.fc8 (kojibuilder@) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-31)) #1 SMP Mon Oct 8 15:32:01 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f7b0000 (usable)
> BIOS-e820: 000000003f7b0000 - 000000003f7c5400 (reserved)
> BIOS-e820: 000000003f7c5400 - 000000003f7e7fb8 (ACPI NVS)
> BIOS-e820: 000000003f7e7fb8 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>119MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 260016) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   260016
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   260016
>On node 0 totalpages: 260016
>  DMA zone: 56 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4040 pages, LIFO batch:0
>  Normal zone: 3080 pages used for memmap
>  Normal zone: 222200 pages, LIFO batch:31
>  HighMem zone: 418 pages used for memmap
>  HighMem zone: 30222 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000F7050, 0024 (r2 HP    )
>ACPI: XSDT 3F7C81C8, 007C (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: FACP 3F7C8084, 00F4 (r4 HP     30C0            3 HP          1)
>ACPI: DSDT 3F7C84CC, 12BE9 (r1 HP       nc75xx    10000 MSFT  3000001)
>ACPI: FACS 3F7E7D80, 0040
>ACPI: SLIC 3F7C8244, 0176 (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: HPET 3F7C83BC, 0038 (r1 HP     30C0            1 HP          1)
>ACPI: APIC 3F7C83F4, 0068 (r1 HP     30C0            1 HP          1)
>ACPI: MCFG 3F7C845C, 003C (r1 HP     30C0            1 HP          1)
>ACPI: TCPA 3F7C8498, 0032 (r2 HP     30C0            1 HP          1)
>ACPI: SSDT 3F7DB0B5, 0059 (r1 HP       HPQNLP        1 MSFT  3000001)
>ACPI: SSDT 3F7DB10E, 032A (r1 HP       HPQPAT        1 MSFT  3000001)
>ACPI: SSDT 3F7DBCBE, 025F (r1 HP      Cpu0Tst     3000 INTL 20060317)
>ACPI: SSDT 3F7DBF1D, 00A6 (r1 HP      Cpu1Tst     3000 INTL 20060317)
>ACPI: SSDT 3F7DBFC3, 04D7 (r1 HP        CpuPm     3000 INTL 20060317)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 256462
>Kernel command line: ro root=/dev/vg00/lvRoot quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0814000 soft=c07f4000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1995.214 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1024 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1013072k/1040064k available (2271k kernel code, 26240k reserved, 1175k data, 568k init, 122560k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0763000 - 0xc07f1000   ( 568 kB)
>      .data : 0xc0637db7 - 0xc075da44   (1175 kB)
>      .text : 0xc0400000 - 0xc0637db7   (2271 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 3994.79 BogoMIPS (lpj=1997398)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>lockdep: not fixing up alternatives.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0815000 soft=c07f5000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.12 BogoMIPS (lpj=1995061)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>Total of 2 processors activated (7984.91 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=604 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=856 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=3376 bytes
>khelper used greatest stack depth: 3160 bytes left
>khelper used greatest stack depth: 3084 bytes left
>HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
>Booting paravirtualized kernel on bare hardware
>Time: 19:42:47  Date: 09/10/107
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=40
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>khelper used greatest stack depth: 3008 bytes left
>ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [C003] (0000:00)
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C132._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT]
>ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *5
>ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C140] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C141] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C142] (IRQs 10 11) *0, disabled.
>ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126]
>ACPI: Power Resource [C298] (on)
>ACPI: Power Resource [C1C2] (off)
>ACPI: Power Resource [C3B6] (off)
>ACPI: Power Resource [C3B7] (off)
>ACPI: Power Resource [C3B8] (off)
>ACPI: Power Resource [C3B9] (off)
>ACPI: Power Resource [C3BA] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:00: iomem range 0x100000-0x3f7fffff could not be reserved
>pnp: 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
>pnp: 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
>pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:0a: ioport range 0x1000-0x107f has been reserved
>pnp: 00:0a: ioport range 0x1100-0x113f has been reserved
>pnp: 00:0a: ioport range 0x1200-0x121f has been reserved
>pnp: 00:0a: iomem range 0xf8000000-0xfbffffff has been reserved
>pnp: 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved
>pnp: 00:0a: iomem range 0xfed20000-0xfed3ffff could not be reserved
>pnp: 00:0a: iomem range 0xfed45000-0xfed8ffff could not be reserved
>pnp: 00:0b: iomem range 0xcee00-0xcffff has been reserved
>pnp: 00:0b: iomem range 0xfeda0000-0xfedbffff could not be reserved
>pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: e4100000-e41fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: e4000000-e40fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: 2000-3fff
>  MEM window: e0000000-e3ffffff
>  PREFETCH window: disabled.
>PCI: Bus 3, cardbus bridge: 0000:02:04.0
>  IO window: 00005000-000050ff
>  IO window: 00005400-000054ff
>  PREFETCH window: 50000000-53ffffff
>  MEM window: 54000000-57ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 5000-5fff
>  MEM window: e4200000-e42fffff
>  PREFETCH window: 50000000-53ffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 65536 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3577k freed
>khelper used greatest stack depth: 2956 bytes left
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1192045367.010:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>khelper used greatest stack depth: 2952 bytes left
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 4FA50D9275099347
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Transitioning device [C3BB] to D3
>ACPI: Transitioning device [C3BB] to D3
>ACPI: Fan [C3BB] (off)
>ACPI: Transitioning device [C3BC] to D3
>ACPI: Transitioning device [C3BC] to D3
>ACPI: Fan [C3BC] (off)
>ACPI: Transitioning device [C3BD] to D3
>ACPI: Transitioning device [C3BD] to D3
>ACPI: Fan [C3BD] (off)
>ACPI: Transitioning device [C3BE] to D3
>ACPI: Transitioning device [C3BE] to D3
>ACPI: Fan [C3BE] (off)
>ACPI: Transitioning device [C3BF] to D3
>ACPI: Transitioning device [C3BF] to D3
>ACPI: Fan [C3BF] (off)
>ACPI: SSDT 3F7DB500, 027F (r1 HP      Cpu0Ist     3000 INTL 20060317)
>ACPI: SSDT 3F7DB804, 04BA (r1 HP      Cpu0Cst     3001 INTL 20060317)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 3F7DB438, 00C8 (r1 HP      Cpu1Ist     3000 INTL 20060317)
>ACPI: SSDT 3F7DB77F, 0085 (r1 HP      Cpu1Cst     3000 INTL 20060317)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [TZ0] (50 C)
>ACPI: Thermal Zone [TZ1] (47 C)
>ACPI: Thermal Zone [TZ3] (34 C)
>ACPI: Thermal Zone [TZ4] (25 C)
>ACPI: Thermal Zone [TZ5] (47 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>khelper used greatest stack depth: 2816 bytes left
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 965GM Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:02:04.0 [103c:30c0]
>Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
>pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>cs: IO port probe 0x5000-0x5fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xe4200000 - 0xe42fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>PNP: PS/2 Controller [PNP0303:C295,PNP0f13:C296] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>Marking TSC unstable due to: TSC halts in idle.
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>Time: hpet clocksource has been installed.
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 11:475:748
>Freeing unused kernel memory: 568k freed
>Write protecting the kernel read-only data: 877k
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4500000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000
>serio: Synaptics pass-through port at isa0060/serio4/input0
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xe4508000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>insmod used greatest stack depth: 1876 bytes left
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004020
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 17, io base 0x00004040
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 19, io base 0x00004060
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 20, io base 0x00004080
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb 3-1: configuration #1 chosen from 1 choice
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000140c0 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000140c8 irq 15
>ata1.00: ATA-7: FUJITSU MHW2160BH PL, 891F, max UDMA/100
>ata1.00: 312581808 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L632M, 0917, max MWDMA2
>ata2.00: configured for MWDMA2
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2160B 891F PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-L632M 0917 PQ: 0 ANSI: 5
>insmod used greatest stack depth: 828 bytes left
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  8 users, 11 roles, 2319 types, 108 bools, 1 sens, 1024 cats
>security:  67 classes, 231443 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1192045374.068:2): policy loaded auid=4294967295
>Clocksource tsc unstable (delta = -157560075 ns)
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>tg3.c:v3.81 (September 5, 2007)
>ACPI: PCI Interrupt 0000:18:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:18:00.0 to 64
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>Bluetooth: HCI USB driver ver 2.9
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>usbcore: registered new interface driver hci_usb
>eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1a:4b:5b:07:46
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input4
>ACPI: Sleep Button (CM) [C2C0]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [C153]
>ACPI: Battery Slot [C238] (battery present)
>ACPI: Battery Slot [C237] (battery absent)
>ACPI: AC Adapter [C236] (on-line)
>input: Video Bus as /class/input/input6
>ACPI: Video Device [C098] (multi-head: yes  rom: no  post: no)
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17kds
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:10:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>si3054: cannot initialize. EXT MID = 0000
>audit(1192045381.344:3): avc:  denied  { read } for  pid=1512 comm="salsa" name="asound.state" dev=dm-0 ino=2092091 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:alsa_etc_rw_t:s0 tclass=file
>audit(1192045381.344:4): avc:  denied  { getattr } for  pid=1512 comm="salsa" path="/etc/alsa/asound.state" dev=dm-0 ino=2092091 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:alsa_etc_rw_t:s0 tclass=file
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-6, type ext3), uses xattr
>Adding 2031608k swap on /dev/mapper/vg00-lvSwap.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>audit(1192045440.253:5): audit_pid=2111 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>named[2320]: segfault at d99a9060 eip b7ee4668 esp b7432220 error 7
>named[2319]: segfault at 00000004 eip 00918f06 esp b7e32fe8 error 6
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bridge firewalling registered
>virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>virbr0: no IPv6 routers present
>named[2790]: segfault at 00000004 eip 00918f06 esp b7ee1fe8 error 6
>named[2791]: segfault at d8427df0 eip b7f93668 esp b74e1220 error 7
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: RX authentication from 00:19:5b:22:28:44 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:19:5b:22:28:44
>wlan0: RX AssocResp from 00:19:5b:22:28:44 (capab=0x471 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:19:5b:22:28:44)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>tun0: Disabled Privacy Extensions
>wlan0: no IPv6 routers present
>IN= OUT=wlan0 SRC=192.168.1.2 DST=18.92.0.144 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=52496 DF PROTO=TCP SPT=53407 DPT=11371 WINDOW=1002 RES=0x00 ACK RST URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.2 DST=18.92.0.144 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=57519 DF PROTO=TCP SPT=34651 DPT=11371 WINDOW=1002 RES=0x00 ACK RST URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.2 DST=76.13.18.70 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=28746 DF PROTO=TCP SPT=57650 DPT=80 WINDOW=46240 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.2 DST=76.13.18.70 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=12483 DF PROTO=TCP SPT=57651 DPT=80 WINDOW=54400 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.2 DST=72.14.211.99 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=49874 DF PROTO=TCP SPT=44861 DPT=80 WINDOW=6432 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.2 DST=76.13.18.70 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=28747 DF PROTO=TCP SPT=57650 DPT=80 WINDOW=46240 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.2 DST=76.13.18.70 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=12484 DF PROTO=TCP SPT=57651 DPT=80 WINDOW=54400 RES=0x00 ACK FIN URGP=0 
>IN= OUT=wlan0 SRC=192.168.1.2 DST=72.14.211.99 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=49875 DF PROTO=TCP SPT=44861 DPT=80 WINDOW=6432 RES=0x00 ACK FIN URGP=0 
>wlan0: disassociate(reason=3)
>wlan0: disassociate(reason=3)
>ACPI: PCI interrupt for device 0000:10:00.0 disabled
>ACPI: PCI interrupt for device 0000:18:00.0 disabled
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17kds
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:10:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>tg3.c:v3.81 (September 5, 2007)
>ACPI: PCI Interrupt 0000:18:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:18:00.0 to 64
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1a:4b:5b:07:46
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>PM: Preparing system for mem sleep
>Stopping tasks ... done.
>PM: Entering mem sleep
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>Disabling non-boot CPUs ...
>Breaking affinity for irq 9
>Breaking affinity for irq 14
>Breaking affinity for irq 16
>CPU 1 is now offline
>lockdep: not fixing up alternatives.
>CPU1 is down
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>Enabling non-boot CPUs ...
>lockdep: not fixing up alternatives.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0815000 soft=c07f5000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.00 BogoMIPS (lpj=1995002)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>Switched to high resolution mode on CPU 1
>CPU1 is up
>APIC error on CPU1: 00(40)
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Enabling device 0000:00:1a.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1a.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>usb usb4: root hub lost power or was reset
>PCI: Enabling device 0000:00:1a.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>si3054: cannot initialize. EXT MID = 0000
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb5: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb6: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb7: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>Coming out of suspend...
>PCI: Enabling device 0000:10:00.0 (0000 -> 0002)
>Monitor-Mwait will be used to enter C-3 state
>sd 0:0:0:0: [sda] Starting disk
>ata2.00: configured for MWDMA2
>ata1.00: configured for UDMA/100
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>PM: Finishing wakeup.
>Restarting tasks ... <5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>
>=============================================
>[ INFO: possible recursive locking detected ]
>2.6.23-0.224.rc9.git6.fc8 #1
>---------------------------------------------
>kseriod/253 is trying to acquire lock:
> (&ps2dev->cmd_mutex){--..}, at: [<c0632e23>] mutex_lock+0x21/0x24
>
>but task is already holding lock:
> (&ps2dev->cmd_mutex){--..}, at: [<c0632e23>] mutex_lock+0x21/0x24
>
>other info that might help us debug this:
>4 locks held by kseriod/253:
> #0:  (serio_mutex){--..}, at: [<c0632e23>] mutex_lock+0x21/0x24
> #1:  (&serio->drv_mutex){--..}, at: [<c0632e23>] mutex_lock+0x21/0x24
> #2:  (psmouse_mutex){--..}, at: [<c0632e23>] mutex_lock+0x21/0x24
> #3:  (&ps2dev->cmd_mutex){--..}, at: [<c0632e23>] mutex_lock+0x21/0x24
>
>stack backtrace:
> [<c0406463>] show_trace_log_lvl+0x1a/0x2f
> [<c0406e4d>] show_trace+0x12/0x14
> [<c0406e65>] dump_stack+0x16/0x18
> [<c0449c6a>] __lock_acquire+0x189/0xc67
> [<c044abc2>] lock_acquire+0x7b/0x9e
> [<c0632c30>] __mutex_lock_slowpath+0x10a/0x2dc
> [<c0632e23>] mutex_lock+0x21/0x24
> [<c059bc17>] ps2_command+0x92/0x30e
> [<c05a239e>] psmouse_sliced_command+0x1c/0x5a
> [<c05a46c3>] synaptics_pt_write+0x21/0x46
> [<c059b9ec>] ps2_sendbyte+0x39/0xcb
> [<c059bc96>] ps2_command+0x111/0x30e
> [<c05a1fd9>] psmouse_probe+0x1d/0x6c
> [<c05a3125>] psmouse_connect+0xf8/0x20c
> [<c05993b8>] serio_connect_driver+0x1e/0x2e
> [<c05993de>] serio_driver_probe+0x16/0x18
> [<c0576795>] driver_probe_device+0xf2/0x173
> [<c057681e>] __device_attach+0x8/0xa
> [<c0575b6a>] bus_for_each_drv+0x3c/0x67
> [<c05768b4>] device_attach+0x75/0x8a
> [<c05993f4>] serio_find_driver+0x14/0x3c
> [<c0599f31>] serio_thread+0x166/0x2b9
> [<c043e7ff>] kthread+0x3b/0x64
> [<c0405ee3>] kernel_thread_helper+0x7/0x10
> =======================
>done.
>usb 3-1: USB disconnect, address 2
>usb 3-1: new full speed USB device using uhci_hcd and address 3
>usb 3-1: configuration #1 chosen from 1 choice
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ACPI: PCI interrupt for device 0000:10:00.0 disabled
>ACPI: PCI interrupt for device 0000:18:00.0 disabled
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17kds
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:10:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>tg3.c:v3.81 (September 5, 2007)
>ACPI: PCI Interrupt 0000:18:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:18:00.0 to 64
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1a:4b:5b:07:46
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>PM: Preparing system for mem sleep
>Stopping tasks ... done.
>PM: Entering mem sleep
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>Disabling non-boot CPUs ...
>CPU 1 is now offline
>lockdep: not fixing up alternatives.
>CPU1 is down
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>Enabling non-boot CPUs ...
>lockdep: not fixing up alternatives.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0815000 soft=c07f5000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.05 BogoMIPS (lpj=1995028)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>Switched to high resolution mode on CPU 1
>CPU1 is up
>APIC error on CPU1: 00(40)
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Enabling device 0000:00:1a.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1a.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>usb usb4: root hub lost power or was reset
>PCI: Enabling device 0000:00:1a.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>si3054: cannot initialize. EXT MID = 0000
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb5: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb6: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb7: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>Coming out of suspend...
>PCI: Enabling device 0000:10:00.0 (0000 -> 0002)
>sd 0:0:0:0: [sda] Starting disk
>ata2.00: configured for MWDMA2
>ata1.00: configured for UDMA/100
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>PM: Finishing wakeup.
>Restarting tasks ... done.
>usb 3-1: USB disconnect, address 3
>usb 3-1: new full speed USB device using uhci_hcd and address 4
>usb 3-1: configuration #1 chosen from 1 choice
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ACPI: PCI interrupt for device 0000:10:00.0 disabled
>ACPI: PCI interrupt for device 0000:18:00.0 disabled
>PM: Preparing system for mem sleep
>Stopping tasks ... done.
>PM: Entering mem sleep
>Suspending console(s)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>ACPI: PCI interrupt for device 0000:00:1a.7 disabled
>ACPI: PCI interrupt for device 0000:00:1a.1 disabled
>ACPI: PCI interrupt for device 0000:00:1a.0 disabled
>Disabling non-boot CPUs ...
>CPU 1 is now offline
>lockdep: not fixing up alternatives.
>CPU1 is down
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>Enabling non-boot CPUs ...
>lockdep: not fixing up alternatives.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0815000 soft=c07f5000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.02 BogoMIPS (lpj=1995011)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>CPU1 is up
>Switched to high resolution mode on CPU 1
>APIC error on CPU1: 00(40)
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Enabling device 0000:00:1a.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1a.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>usb usb4: root hub lost power or was reset
>PCI: Enabling device 0000:00:1a.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>si3054: cannot initialize. EXT MID = 0000
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb5: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb6: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb7: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>sd 0:0:0:0: [sda] Starting disk
>ata2.00: configured for MWDMA2
>ata1.00: configured for UDMA/100
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>PM: Finishing wakeup.
>Restarting tasks ... done.
>usb 3-1: USB disconnect, address 4
>usb 3-1: new full speed USB device using uhci_hcd and address 5
>usb 3-1: configuration #1 chosen from 1 choice
>tg3.c:v3.81 (September 5, 2007)
>ACPI: PCI Interrupt 0000:18:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:18:00.0 to 64
>eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1a:4b:5b:07:46
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17kds
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:10:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>tun0: Disabled Privacy Extensions
>IN= OUT=eth0 SRC=10.0.0.11 DST=72.5.124.56 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=59552 DF PROTO=TCP SPT=60677 DPT=80 WINDOW=363 RES=0x00 ACK FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=72.5.124.56 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=41066 DF PROTO=TCP SPT=60673 DPT=80 WINDOW=757 RES=0x00 ACK FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=72.5.124.56 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2621 DF PROTO=TCP SPT=60678 DPT=80 WINDOW=363 RES=0x00 ACK FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=72.5.124.56 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=41067 DF PROTO=TCP SPT=60673 DPT=80 WINDOW=757 RES=0x00 ACK FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=72.5.124.56 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=59553 DF PROTO=TCP SPT=60677 DPT=80 WINDOW=363 RES=0x00 ACK FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=72.5.124.56 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2622 DF PROTO=TCP SPT=60678 DPT=80 WINDOW=363 RES=0x00 ACK FIN URGP=0 
>device vnet0 entered promiscuous mode
>virbr0: port 1(vnet0) entering learning state
>virbr0: topology change detected, propagating
>virbr0: port 1(vnet0) entering forwarding state
>vnet0: no IPv6 routers present
>virbr0: port 1(vnet0) entering disabled state
>device vnet0 left promiscuous mode
>virbr0: port 1(vnet0) entering disabled state
>device vnet0 entered promiscuous mode
>virbr0: port 1(vnet0) entering learning state
>virbr0: topology change detected, propagating
>virbr0: port 1(vnet0) entering forwarding state
>kvm: guest NX capability removed
>kvm: emulating exchange as write
>vnet0: no IPv6 routers present
>virbr0: port 1(vnet0) entering disabled state
>device vnet0 left promiscuous mode
>virbr0: port 1(vnet0) entering disabled state
>IN= OUT=eth0 SRC=10.0.0.11 DST=74.52.83.219 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=32429 DF PROTO=TCP SPT=33541 DPT=80 WINDOW=175 RES=0x00 ACK FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=209.132.176.120 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2053 DF PROTO=TCP SPT=50462 DPT=80 WINDOW=108 RES=0x00 ACK FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=209.132.176.120 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2054 DF PROTO=TCP SPT=50462 DPT=80 WINDOW=108 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=209.132.176.120 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2055 DF PROTO=TCP SPT=50462 DPT=80 WINDOW=108 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=209.132.176.120 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2056 DF PROTO=TCP SPT=50462 DPT=80 WINDOW=108 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=209.132.176.120 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2057 DF PROTO=TCP SPT=50462 DPT=80 WINDOW=108 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=209.132.176.120 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2058 DF PROTO=TCP SPT=50462 DPT=80 WINDOW=108 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=209.132.176.120 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2059 DF PROTO=TCP SPT=50462 DPT=80 WINDOW=108 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=209.132.176.120 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2060 DF PROTO=TCP SPT=50462 DPT=80 WINDOW=108 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=209.132.176.120 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2061 DF PROTO=TCP SPT=50462 DPT=80 WINDOW=108 RES=0x00 ACK PSH FIN URGP=0 
>IN=eth0 OUT= MAC=00:1a:4b:5b:07:46:00:13:64:1d:cd:7f:08:00 SRC=209.132.176.98 DST=10.0.0.11 LEN=64 TOS=0x00 PREC=0x00 TTL=23 ID=44380 DF PROTO=TCP SPT=80 DPT=46556 WINDOW=1197 RES=0x00 ACK RST URGP=0 
>IN=eth0 OUT= MAC=00:1a:4b:5b:07:46:00:13:64:1d:cd:7f:08:00 SRC=209.132.176.98 DST=10.0.0.11 LEN=64 TOS=0x00 PREC=0x00 TTL=23 ID=44381 DF PROTO=TCP SPT=80 DPT=46556 WINDOW=1197 RES=0x00 ACK RST URGP=0 
>IN=eth0 OUT= MAC=00:1a:4b:5b:07:46:00:13:64:1d:cd:7f:08:00 SRC=209.132.176.98 DST=10.0.0.11 LEN=64 TOS=0x00 PREC=0x00 TTL=23 ID=44382 DF PROTO=TCP SPT=80 DPT=46556 WINDOW=1197 RES=0x00 ACK RST URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=91.189.90.211 LEN=558 TOS=0x00 PREC=0x00 TTL=64 ID=24028 DF PROTO=TCP SPT=42977 DPT=443 WINDOW=1002 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=91.189.90.211 LEN=558 TOS=0x00 PREC=0x00 TTL=64 ID=24029 DF PROTO=TCP SPT=42977 DPT=443 WINDOW=1002 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=91.189.90.235 LEN=89 TOS=0x00 PREC=0x00 TTL=64 ID=4810 DF PROTO=TCP SPT=50386 DPT=443 WINDOW=408 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=91.189.90.235 LEN=89 TOS=0x00 PREC=0x00 TTL=64 ID=26747 DF PROTO=TCP SPT=50387 DPT=443 WINDOW=906 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=204.9.177.195 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=41439 DF PROTO=TCP SPT=60708 DPT=80 WINDOW=680 RES=0x00 ACK FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=91.189.90.235 LEN=89 TOS=0x00 PREC=0x00 TTL=64 ID=4811 DF PROTO=TCP SPT=50386 DPT=443 WINDOW=408 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=91.189.90.235 LEN=89 TOS=0x00 PREC=0x00 TTL=64 ID=26748 DF PROTO=TCP SPT=50387 DPT=443 WINDOW=906 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=204.9.177.195 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=62540 DF PROTO=TCP SPT=60607 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=204.9.177.195 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=41440 DF PROTO=TCP SPT=60708 DPT=80 WINDOW=680 RES=0x00 ACK FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=204.9.177.195 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=38621 DF PROTO=TCP SPT=60608 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=204.9.178.170 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=44744 DF PROTO=TCP SPT=35101 DPT=80 WINDOW=816 RES=0x00 ACK FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=209.132.176.98 LEN=72 TOS=0x00 PREC=0x00 TTL=64 ID=12354 DF PROTO=TCP SPT=46554 DPT=80 WINDOW=348 RES=0x00 ACK FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=204.9.177.195 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=62541 DF PROTO=TCP SPT=60607 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=204.9.177.195 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=38622 DF PROTO=TCP SPT=60608 DPT=80 WINDOW=1002 RES=0x00 ACK FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=204.9.178.170 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=44745 DF PROTO=TCP SPT=35101 DPT=80 WINDOW=816 RES=0x00 ACK FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=209.132.176.98 LEN=72 TOS=0x00 PREC=0x00 TTL=64 ID=12355 DF PROTO=TCP SPT=46554 DPT=80 WINDOW=348 RES=0x00 ACK FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=63.164.134.150 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=46792 DF PROTO=TCP SPT=49815 DPT=80 WINDOW=227 RES=0x00 ACK FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=63.164.134.150 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=46793 DF PROTO=TCP SPT=49815 DPT=80 WINDOW=227 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=63.164.134.150 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=46794 DF PROTO=TCP SPT=49815 DPT=80 WINDOW=227 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=63.164.134.150 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=46795 DF PROTO=TCP SPT=49815 DPT=80 WINDOW=227 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=63.164.134.150 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=46796 DF PROTO=TCP SPT=49815 DPT=80 WINDOW=227 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=63.164.134.150 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=46797 DF PROTO=TCP SPT=49815 DPT=80 WINDOW=227 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=63.164.134.150 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=46798 DF PROTO=TCP SPT=49815 DPT=80 WINDOW=227 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=63.164.134.150 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=46799 DF PROTO=TCP SPT=49815 DPT=80 WINDOW=227 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=63.164.134.150 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=46800 DF PROTO=TCP SPT=49815 DPT=80 WINDOW=227 RES=0x00 ACK PSH FIN URGP=0 
>IN= OUT=eth0 SRC=10.0.0.11 DST=87.117.229.205 LEN=371 TOS=0x00 PREC=0x00 TTL=64 ID=42202 DF PROTO=TCP SPT=39056 DPT=80 WINDOW=108 RES=0x00 ACK PSH FIN URGP=0

Actions: View

Attachments on bug 239108: 155658 | 224431 | 224451