Attachment 231041 Details for Bug 337731 – Dmesg

Dmesg

dmesg.txt (text/plain), 28.04 KB, created by Mauricio Pretto on 2007-10-18 13:29:38 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mauricio Pretto

Created: 2007-10-18 13:29:38 UTC

Size: 28.04 KB

patch

obsolete

>Linux version 2.6.23.1-16.ALSA_NV (root@dhcp83-63.boston.redhat.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-13)) #1 SMP Tue Oct 16 13:34:36 EDT 2007
>Command line: ro root=LABEL=/
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
> BIOS-e820: 000000007fed0000 - 000000007fedf000 (ACPI NVS)
> BIOS-e820: 000000007fedf000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 523984) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI present.
>ACPI: RSDP 000F8040, 0024 (r2 HP    )
>ACPI: XSDT 7FED2354, 0084 (r1 HPQOEM SLIC-MPC  6040000  LTP        0)
>ACPI: FACP 7FEDBC04, 00F4 (r3 HP     30CC      6040000 ALAN        1)
>ACPI: DSDT 7FED364B, 8545 (r1 HP     30CB      6040000 INTL 20060707)
>ACPI: FACS 7FEDEFC0, 0040
>ACPI: APIC 7FEDBCF8, 0068 (r1 HP     30CB      6040000 LOHR       5A)
>ACPI: HPET 7FEDBD60, 0038 (r1 HP     30CB      6040000 LOHR       5A)
>ACPI: MCFG 7FEDBD98, 003C (r1 HP     30CB      6040000 LOHR       5A)
>ACPI: TMOR 7FEDBDD4, 0026 (r1 HP     30CC      6040000 PTL         3)
>ACPI: APIC 7FEDBDFA, 0068 (r1 HP     30CB      6040000  LTP        0)
>ACPI: BOOT 7FEDBE62, 0028 (r1 HP     30CB      6040000  LTP        1)
>ACPI: SLIC 7FEDBE8A, 0176 (r1 HPQOEM SLIC-MPC  6040000  LTP        1)
>ACPI: SSDT 7FED336E, 02DD (r1 HP     30CB         1000 INTL 20060707)
>ACPI: SSDT 7FED2964, 025F (r1  HP    30CB         3000 INTL 20060707)
>ACPI: SSDT 7FED28BE, 00A6 (r1  HP    30CB         3000 INTL 20060707)
>ACPI: SSDT 7FED23D8, 04E6 (r1  HP     30CB        3000 INTL 20060707)
>ACPI: BIOS bug: multiple APIC/MADT found, using 0
>ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007fed0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 523984) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007fed0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   523984
>On node 0 totalpages: 523887
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1315 pages reserved
>  DMA zone: 2628 pages, LIFO batch:0
>  DMA32 zone: 7107 pages used for memmap
>  DMA32 zone: 512781 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000
>swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000
>swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 41688 bytes of per cpu data
>Built 1 zonelists in Node order.  Total pages: 515409
>Policy zone: DMA32
>Kernel command line: ro root=LABEL=/
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>hpet clockevent registered
>TSC calibrated against HPET
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 1496.245 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2058164k/2095936k available (2440k kernel code, 37384k reserved, 1378k data, 324k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 2995.18 BogoMIPS (lpj=1497590)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 10390579
>Detected 10.390 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 2992.36 BogoMIPS (lpj=1496183)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Duo CPU     T5250  @ 1.50GHz stepping 0d
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2064 bytes
>Time: 11:24:42  Date: 10/18/07
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000 - efffffff
>ACPI: EC: Look up EC in DSDT
>ACPI: System BIOS is requesting _OSI(Linux)
>ACPI: If "acpi_osi=Linux" works better,
>Please send dmidecode to linux-acpi@vger.kernel.org
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: hpet clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
>pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
>pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
>PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: cc000000-ceffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: f8000000-f80fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: 3000-3fff
>  MEM window: f4000000-f7ffffff
>  PREFETCH window: f0000000-f3ffffff
>PCI: Bridge: 0000:00:1c.5
>  IO window: 4000-4fff
>  MEM window: f8100000-f81fffff
>  PREFETCH window: 88000000-880fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: f8200000-f82fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3182k freed
>Simple Boot Flag at 0x35 set to 0x1
>audit: initializing netlink socket (disabled)
>audit(1192706681.622:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 399AAA2E207D468C
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie02]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>Allocate Port Service[0000:00:1c.5:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7FED30F2, 01B4 (r1  HP    30CB         3000 INTL 20060707)
>ACPI: SSDT 7FED2BC3, 04AA (r1  HP    30CB         3001 INTL 20060707)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7FED32A6, 00C8 (r1  HP    30CB         3000 INTL 20060707)
>ACPI: SSDT 7FED306D, 0085 (r1  HP    30CB         3000 INTL 20060707)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI Exception (thermal-0338): AE_BAD_DATA, No critical threshold [20070126]
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>  Magic number: 11:915:428
>Freeing unused kernel memory: 324k freed
>Write protecting the kernel read-only data: 1020k
>Clocksource tsc unstable (delta = -177056742 ns)
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8504800
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8504c00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>usb 2-4: new high speed USB device using ehci_hcd and address 3
>SCSI subsystem initialized
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
>libata version 2.21 loaded.
>ahci 0000:00:1f.2: version 2.3
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>usb 2-4: configuration #1 chosen from 1 choice
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>usb 4-2: new low speed USB device using uhci_hcd and address 2
>usb 4-2: configuration #1 chosen from 1 choice
>input: HID 062a:0000 as /class/input/input3
>input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1a.1-2
>usb 6-1: new full speed USB device using uhci_hcd and address 2
>usb 6-1: configuration #1 chosen from 1 choice
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 cmd 0xffffc2000034c100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
>ata2: SATA max UDMA/133 cmd 0xffffc2000034c180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
>ata3: SATA max UDMA/133 cmd 0xffffc2000034c200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100
>ata1.00: 234441648 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100
>ata3.00: 234441648 sectors, multi 16: LBA48 
>ata3.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 2:0:0:0: Direct-Access     ATA      FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 2:0:0:0: [sdb] Attached SCSI disk
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi3 : ata_piix
>scsi4 : ata_piix
>ata4: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000118a0 irq 14
>ata5: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000118a8 irq 15
>ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NC08, max MWDMA2
>ata4.00: configured for MWDMA2
>scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20L  NC08 PQ: 0 ANSI: 5
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1192706691.422:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>sr 3:0:0:0: Attached scsi generic sg2 type 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:06:00.0 to 64
>eth0: RTL8168b/8111b at 0xffffc2000034e000, 00:1b:24:71:8c:0d, XID 38000000 IRQ 17
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
>iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.17kds
>iwl4965: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>iwl4965: Detected Intel Wireless WiFi Link 4965AGN
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>input: Lid Switch as /class/input/input7
>ACPI: Lid Switch [LID]
>input: Video Bus as /class/input/input8
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /class/input/input9
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>sdhci: SDHCI controller found at 0000:07:09.1 [1180:0822] (rev 22)
>ACPI: PCI Interrupt 0000:07:09.1[B] -> GSI 21 (level, low) -> IRQ 21
>mmc0: SDHCI at 0xf8200800 irq 21 DMA
>ACPI: PCI Interrupt 0000:07:09.0[A] -> GSI 20 (level, low) -> IRQ 20
>firewire_ohci: Added fw-ohci device 0000:07:09.0, OHCI version 1.10
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  100.14.19  Wed Sep 12 14:08:38 PDT 2007
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_intel.c:727: codec_mask = 0x3
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>ALSA sound/pci/hda/hda_codec.c:2163: hda_codec: model 'toshiba' is selected for config 103c:30cc (TOSHIBA)
>ALSA sound/pci/hda/hda_intel.c:576: hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x10a90000
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 4096564k swap on /dev/sdb2.  Priority:-1 extents:1 across:4096564k
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>NET: Registered protocol family 23
>IrCOMM protocol (Dag Brattli)
>PPP generic driver version 2.4.2
>ALSA sound/pci/hda/hda_intel.c:1254: azx_pcm_prepare: bufsize=0x1800, fragsize=0x800, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x2, stream=0x0, channel=0, format=0x0
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x3, stream=0x0, channel=0, format=0x0
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x3, stream=0x0, channel=0, format=0x0
>r8169: eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ALSA sound/pci/hda/hda_intel.c:1254: azx_pcm_prepare: bufsize=0x4000, fragsize=0x1000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1254: azx_pcm_prepare: bufsize=0x4000, fragsize=0x1000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1254: azx_pcm_prepare: bufsize=0x4000, fragsize=0x1000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1254: azx_pcm_prepare: bufsize=0x4000, fragsize=0x1000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1254: azx_pcm_prepare: bufsize=0x4000, fragsize=0x1000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1254: azx_pcm_prepare: bufsize=0x4000, fragsize=0x1000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1254: azx_pcm_prepare: bufsize=0x4000, fragsize=0x1000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x2, stream=0x0, channel=0, format=0x0
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x3, stream=0x0, channel=0, format=0x0
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x3, stream=0x0, channel=0, format=0x0
>ALSA sound/pci/hda/hda_codec.c:687: hda_codec_setup_stream: NID=0x8, stream=0x0, channel=0, format=0x0
>------------------ SWITCH OFF/ON
>iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels
>phy0: Selected rate control algorithm 'iwl-4965-rs'
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:19:e0:a3:fa:b6
>wlan0: RX authentication from 00:19:e0:a3:fa:b6 (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:19:e0:a3:fa:b6
>wlan0: RX AssocResp from 00:19:e0:a3:fa:b6 (capab=0x431 status=0 aid=4)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:19:e0:a3:fa:b6)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present

Actions: View

Attachments on bug 337731: 231041