Attachment 232851 Details for Bug 340221 – dmesg output

dmesg output

dmesg.txt (text/plain), 29.12 KB, created by Robert 'Bob' Jensen on 2007-10-19 17:58:28 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Robert 'Bob' Jensen

Created: 2007-10-19 17:58:28 UTC

Size: 29.12 KB

patch

obsolete

>Linux version 2.6.23.1-8.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-27)) #1 SMP Thu Oct 18 11:06:02 EDT 2007
>Command line: ro root=/dev/RootGrp/RootVol rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bffa0000 (usable)
> BIOS-e820: 00000000bffa0000 - 00000000bffae000 (ACPI data)
> BIOS-e820: 00000000bffae000 - 00000000bfff0000 (ACPI NVS)
> BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 786336) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used
>end_pfn_map = 1310720
>DMI 2.4 present.
>ACPI: RSDP 000F7FB0, 0024 (r2 ACPIAM)
>ACPI: XSDT BFFA0100, 0074 (r1 _ASUS_ Notebook  4000722 MSFT       97)
>ACPI: FACP BFFA0290, 00F4 (r3 A_M_I_ OEMFACP   4000722 MSFT       97)
>ACPI: DSDT BFFA0640, C7AE (r1  A8S00 A8S00001        1 INTL 20051117)
>ACPI: FACS BFFAE000, 0040
>ACPI: APIC BFFA0390, 005C (r1 A_M_I_ OEMAPIC   4000722 MSFT       97)
>ACPI: MCFG BFFA03F0, 003C (r1 A_M_I_ OEMMCFG   4000722 MSFT       97)
>ACPI: SLIC BFFA0430, 0176 (r1 _ASUS_ Notebook  4000722 MSFT       97)
>ACPI: BOOT BFFA05B0, 0028 (r1 A_M_I_ OEMBOOT   4000722 MSFT       97)
>ACPI: ECDT BFFA05E0, 0054 (r1 A_M_I_ OEMECDT   4000722 MSFT       97)
>ACPI: OEMB BFFAE040, 0060 (r1 A_M_I_ AMI_OEM   4000722 MSFT       97)
>ACPI: HPET BFFACDF0, 0038 (r1 A_M_I_ OEMHPET   4000722 MSFT       97)
>ACPI: ATKG BFFAE2A0, 8024 (r1 A_M_I_  OEMATKG  3000727 MSFT       97)
>ACPI: SSDT BFFB6C80, 04E6 (r1  PmRef    CpuPm     3000 INTL 20051117)
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000140000000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 786336) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used
>Bootmem setup node 0 0000000000000000-0000000140000000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1310720
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   786336
>    0:  1048576 ->  1310720
>On node 0 totalpages: 1048383
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1311 pages reserved
>  DMA zone: 2632 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 767960 pages, LIFO batch:31
>  Normal zone: 3584 pages used for memmap
>  Normal zone: 258560 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e6000
>swsusp: Registered nosave memory region: 00000000000e6000 - 0000000000100000
>swsusp: Registered nosave memory region: 00000000bffa0000 - 00000000bffae000
>swsusp: Registered nosave memory region: 00000000bffae000 - 00000000bfff0000
>swsusp: Registered nosave memory region: 00000000bfff0000 - 00000000c0000000
>swsusp: Registered nosave memory region: 00000000c0000000 - 00000000fee00000
>swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000
>swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ffb00000
>swsusp: Registered nosave memory region: 00000000ffb00000 - 0000000100000000
>Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 41176 bytes of per cpu data
>Built 1 zonelists in Node order.  Total pages: 1029152
>Policy zone: Normal
>Kernel command line: ro root=/dev/RootGrp/RootVol rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>time.c: Detected 1795.500 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x1031000 - 0x5031000
>Memory: 4060876k/5242880k available (2420k kernel code, 132656k reserved, 1370k data, 324k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 3593.58 BogoMIPS (lpj=1796790)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring handled by SMI
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 12468746
>Detected 12.468 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3590.99 BogoMIPS (lpj=1795496)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Duo CPU     T7100  @ 1.80GHz stepping 0d
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2064 bytes
>Time: 17:16:54  Date: 10/19/07
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: EC: EC description table is found, configuring boot EC
>
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>Error attaching device data
>Error attaching device data
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *6)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 12)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 12)
>ACPI Warning (tbutils-0217): Incorrect checksum in table [ATKG] -  3C, should be 36 [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 9 of bridge 0000:00:01.0
>PCI: Cannot allocate resource region 1 of device 0000:01:00.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
>pnp: 00:09: ioport range 0x480-0x48f has been reserved
>pnp: 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
>pnp: 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved
>pnp: 00:0a: iomem range 0xfed45000-0xfed89fff has been reserved
>pnp: 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
>pnp: 00:0c: ioport range 0x250-0x253 has been reserved
>pnp: 00:0c: ioport range 0x256-0x25f has been reserved
>pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
>pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
>pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0e: iomem range 0xc0000-0xcffff has been reserved
>pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0e: iomem range 0x100000-0xbfffffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: a000-afff
>  MEM window: f7f00000-fdffffff
>  PREFETCH window: 140000000-14fffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: fe000000-fe0fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: b000-bfff
>  MEM window: fe100000-fe1fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: c000-cfff
>  MEM window: fe200000-fe9fffff
>  PREFETCH window: ddf00000-dfefffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: fea00000-feafffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 12582912 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3768k freed
>Simple Boot Flag at 0x52 set to 0x1
>audit: initializing netlink socket (disabled)
>audit(1192814213.827:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 8D3F56DE946708E
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT BFFB63A0, 0244 (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
>ACPI: SSDT BFFB6680, 05F1 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [P001] (supports 8 throttling states)
>ACPI: SSDT BFFB62D0, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20051117)
>ACPI: SSDT BFFB65F0, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20051117)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [P002] (supports 8 throttling states)
>Marking TSC unstable due to possible TSC halt in C2
>Time: hpet clocksource has been installed.
>ACPI: Thermal Zone [THRM] (58 C)
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>  Magic number: 11:973:289
>  hash matches device tty22
>Freeing unused kernel memory: 324k freed
>Write protecting the kernel read-only data: 1012k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e080
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04713/0x200000
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>usb 1-1: configuration #1 chosen from 1 choice
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>input: AT Translated Set 2 keyboard as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>usb 1-1: USB disconnect, address 2
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ahci 0000:00:1f.2: version 2.3
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 20
>usb 6-1: new high speed USB device using ehci_hcd and address 2
>usb 6-1: configuration #1 chosen from 1 choice
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 cmd 0xffffc20001466900 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2297
>ata2: SATA max UDMA/133 cmd 0xffffc20001466980 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2297
>ata3: SATA max UDMA/133 cmd 0xffffc20001466a00 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2297
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
>ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (not used)
>ata1.00: configured for UDMA/100
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1192814228.928:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1855 types, 86 bools, 1 sens, 1024 cats
>security:  61 classes, 70897 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1192814229.285:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>eth0: RTL8168b/8111b at 0xffffc20001468000, 00:1b:fc:54:05:5e, XID 38000000 IRQ 18
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi3 : ata_piix
>scsi4 : ata_piix
>ata4: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14
>ata5: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input4
>ACPI: Sleep Button (CM) [SLPB]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID]
>ACPI: AC Adapter [AC0] (off-line)
>asus-laptop: Asus Laptop Support version 0.42
>asus-laptop:   A8Sc model detected
>Registered led device: asus:mail
>input: Video Bus as /class/input/input6
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /class/input/input7
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>ata4.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.21, max UDMA/33
>iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.17kds
>iwl4965: Copyright(c) 2003-2007 Intel Corporation
>ACPI: Battery Slot [BAT0] (battery present)
>ata4.00: configured for UDMA/33
>ata5: port disabled. ignoring.
>scsi 3:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-850S  1.21 PQ: 0 ANSI: 5
>scsi 3:0:0:0: Attached scsi generic sg1 type 5
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>iwl4965: Detected Intel Wireless WiFi Link 4965AGN
>usb 4-1: new full speed USB device using uhci_hcd and address 2
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>usb 4-1: configuration #1 chosen from 1 choice
>NET: Registered protocol family 23
>found SMC SuperIO Chip (devid=0x7a rev=03 base=0x002e): LPC47N227
>smsc_superio_flat(): fir: 0x6f8, sir: 0x2f8, dma: 03, irq: 3, mode: 0x0e
>smsc_ircc_present: can't get sir_base of 0x2f8
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>ACPI: PCI Interrupt 0000:08:03.0[A] -> GSI 21 (level, low) -> IRQ 21
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>firewire_ohci: Added fw-ohci device 0000:08:03.0, OHCI version 1.0
>sdhci: SDHCI controller found at 0000:08:03.1 [1180:0822] (rev 22)
>ACPI: PCI Interrupt 0000:08:03.1[B] -> GSI 20 (level, low) -> IRQ 20
>mmc0: SDHCI at 0xfeaff400 irq 20 DMA
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>audit(1192814237.105:4): avc:  denied  { read } for  pid=1446 comm="salsa" name="asound.state" dev=dm-0 ino=853239 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:alsa_etc_rw_t:s0 tclass=file
>audit(1192814237.105:5): avc:  denied  { read } for  pid=1452 comm="salsa" name="asound.state" dev=dm-0 ino=853239 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:alsa_etc_rw_t:s0 tclass=file
>audit(1192814237.105:6): avc:  denied  { read } for  pid=1447 comm="salsa" name="asound.state" dev=dm-0 ino=853239 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:alsa_etc_rw_t:s0 tclass=file
>audit(1192814237.105:7): avc:  denied  { read } for  pid=1453 comm="salsa" name="asound.state" dev=dm-0 ino=853239 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:alsa_etc_rw_t:s0 tclass=file
>audit(1192814237.105:8): avc:  denied  { read } for  pid=1445 comm="salsa" name="asound.state" dev=dm-0 ino=853239 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:alsa_etc_rw_t:s0 tclass=file
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>floppy0: no floppy controllers found
>mtrr: type mismatch for fbc00000,200000 old: write-back new: write-combining
>mtrr: type mismatch for fb800000,400000 old: write-back new: write-combining
>mtrr: type mismatch for fb000000,800000 old: write-back new: write-combining
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>Adding 2097144k swap on /dev/RootGrp/SwapVol.  Priority:-1 extents:1 across:2097144k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>audit(1192814255.829:9): audit_pid=1926 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bridge firewalling registered
>virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>virbr0: no IPv6 routers present
>mtrr: type mismatch for fbc00000,200000 old: write-back new: write-combining
>mtrr: type mismatch for fb800000,400000 old: write-back new: write-combining
>mtrr: type mismatch for fb000000,800000 old: write-back new: write-combining

Actions: View

Attachments on bug 340221: 232851 | 232861