Attachment 234281 Details for Bug 335671 – dmesg ouptput

dmesg ouptput

dmesg.out (text/plain), 25.34 KB, created by petrosyan on 2007-10-22 17:28:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: petrosyan

Created: 2007-10-22 17:28:44 UTC

Size: 25.34 KB

patch

obsolete

>Linux version 2.6.23.1-23.fc8 (kojibuilder@) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-32)) #1 SMP Wed Oct 17 18:14:46 EDT 2007
>Command line: ro root=LABEL=/1 rhgb quiet pci=nomsi
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
> BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable)
> BIOS-e820: 00000000bf6b0000 - 00000000bf6cc000 (ACPI data)
> BIOS-e820: 00000000bf6cc000 - 00000000bf700000 (ACPI NVS)
> BIOS-e820: 00000000bf700000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
>Entering add_active_range(0, 0, 157) 0 entries of 3200 used
>Entering add_active_range(0, 256, 784048) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1294336) 2 entries of 3200 used
>end_pfn_map = 1294336
>DMI present.
>ACPI: RSDP 000F6950, 0024 (r2 LENOVO)
>ACPI: XSDT BF6BD5CA, 0094 (r1 LENOVO TP-7N        1080  LTP        0)
>ACPI: FACP BF6BD700, 00F4 (r3 LENOVO TP-7N        1080 LNVO        1)
>ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
>ACPI: DSDT BF6BDADB, E0C8 (r1 LENOVO TP-7N        1080 MSFT  3000000)
>ACPI: FACS BF6E4000, 0040
>ACPI: SSDT BF6BD8B4, 0227 (r1 LENOVO TP-7N        1080 MSFT  3000000)
>ACPI: ECDT BF6CBBA3, 0052 (r1 LENOVO TP-7N        1080 LNVO        1)
>ACPI: TCPA BF6CBBF5, 0032 (r2 LENOVO TP-7N        1080 LNVO        1)
>ACPI: APIC BF6CBC27, 0068 (r1 LENOVO TP-7N        1080 LNVO        1)
>ACPI: MCFG BF6CBC8F, 003C (r1 LENOVO TP-7N        1080 LNVO        1)
>ACPI: HPET BF6CBCCB, 0038 (r1 LENOVO TP-7N        1080 LNVO        1)
>ACPI: SLIC BF6CBDF0, 0176 (r1 LENOVO TP-7N        1080  LTP        0)
>ACPI: BOOT BF6CBF66, 0028 (r1 LENOVO TP-7N        1080  LTP        1)
>ACPI: ASF! BF6CBF8E, 0072 (r16 LENOVO TP-7N        1080 PTL         1)
>ACPI: SSDT BF6E26D9, 025F (r1 LENOVO TP-7N        1080 INTL 20050513)
>ACPI: SSDT BF6E2938, 00A6 (r1 LENOVO TP-7N        1080 INTL 20050513)
>ACPI: SSDT BF6E29DE, 04F7 (r1 LENOVO TP-7N        1080 INTL 20050513)
>ACPI: SSDT BF6E2ED5, 01D8 (r1 LENOVO TP-7N        1080 INTL 20050513)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000013c000000
>Entering add_active_range(0, 0, 157) 0 entries of 3200 used
>Entering add_active_range(0, 256, 784048) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1294336) 2 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000013c000000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1294336
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0:        0 ->      157
>    0:      256 ->   784048
>    0:  1048576 ->  1294336
>On node 0 totalpages: 1029709
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1317 pages reserved
>  DMA zone: 2624 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 765672 pages, LIFO batch:31
>  Normal zone: 3360 pages used for memmap
>  Normal zone: 242400 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
>swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>swsusp: Registered nosave memory region: 00000000bf6b0000 - 00000000bf6cc000
>swsusp: Registered nosave memory region: 00000000bf6cc000 - 00000000bf700000
>swsusp: Registered nosave memory region: 00000000bf700000 - 00000000c0000000
>swsusp: Registered nosave memory region: 00000000c0000000 - 00000000f0000000
>swsusp: Registered nosave memory region: 00000000f0000000 - 00000000f4000000
>swsusp: Registered nosave memory region: 00000000f4000000 - 00000000fec00000
>swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec10000
>swsusp: Registered nosave memory region: 00000000fec10000 - 00000000fed00000
>swsusp: Registered nosave memory region: 00000000fed00000 - 00000000fed14000
>swsusp: Registered nosave memory region: 00000000fed14000 - 00000000fed1a000
>swsusp: Registered nosave memory region: 00000000fed1a000 - 00000000fed1c000
>swsusp: Registered nosave memory region: 00000000fed1c000 - 00000000fed90000
>swsusp: Registered nosave memory region: 00000000fed90000 - 00000000fee00000
>swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000
>swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ff000000
>swsusp: Registered nosave memory region: 00000000ff000000 - 0000000100000000
>Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 41688 bytes of per cpu data
>Built 1 zonelists in Node order.  Total pages: 1010696
>Policy zone: Normal
>Kernel command line: ro root=LABEL=/1 rhgb quiet pci=nomsi
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>hpet clockevent registered
>TSC calibrated against HPET
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 1995.000 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x1031000 - 0x5031000
>Memory: 3986756k/5177344k available (2441k kernel code, 132080k reserved, 1378k data, 324k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 3993.73 BogoMIPS (lpj=1996865)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>APIC timer calibration result 12468746
>Detected 12.468 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3989.80 BogoMIPS (lpj=1994902)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz stepping 0a
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2064 bytes
>Time: 17:08:08  Date: 10/22/07
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver 
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at f0000000 - f3ffffff
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: Power Resource [PUBS] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: hpet clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xc0000-0xc3fff has been reserved
>pnp: 00:00: iomem range 0xc4000-0xc7fff has been reserved
>pnp: 00:00: iomem range 0xc8000-0xcbfff has been reserved
>pnp: 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
>pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
>pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: fc000000-fdffffff
>  PREFETCH window: f8000000-f80fffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: 3000-3fff
>  MEM window: dc100000-dfcfffff
>  PREFETCH window: dfe00000-dfefffff
>PCI: Bus 6, cardbus bridge: 0000:05:00.0
>  IO window: 00004000-000040ff
>  IO window: 00004400-000044ff
>  PREFETCH window: f4000000-f7ffffff
>  MEM window: c4000000-c7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 4000-7fff
>  MEM window: f8300000-fbffffff
>  PREFETCH window: f4000000-f7ffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 12582912 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3175k freed
>Simple Boot Flag at 0x35 set to 0x1
>audit: initializing netlink socket (disabled)
>audit(1193072888.559:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 546BEEB15A3671E3
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>Allocate Port Service[0000:00:1c.1:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT BF6E1D72, 02C4 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
>ACPI: SSDT BF6E20BB, 061E (r1  PmRef  Cpu0Cst      100 INTL 20050513)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT BF6E1CAA, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
>ACPI: SSDT BF6E2036, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (50 C)
>ACPI: Thermal Zone [THM1] (50 C)
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 965GM Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:05:00.0 [17aa:20c6]
>Yenta: ISA IRQ mask 0x04b8, PCI irq 16
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x7fff
>pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff
>pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>  Magic number: 11:545:138
>Freeing unused kernel memory: 324k freed
>Write protecting the kernel read-only data: 1020k
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>Clocksource tsc unstable (delta = -409423318 ns)
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ahci 0000:00:1f.2: version 2.3
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match
>usb 3-1: configuration #1 chosen from 1 choice
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>ata1: SATA max UDMA/133 cmd 0xffffc20000664100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: HITACHI HTS541680J9SA00, SB2IC7UP, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS54168 SB2I PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1193072895.363:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi1 : ata_piix
>scsi2 : ata_piix
>ata2: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000118e0 irq 14
>ata3: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000118e8 irq 15
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input4
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>thinkpad_acpi: ThinkPad ACPI Extras v0.16
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 7NET27WW (1.08 ), EC 7MHT24WW-1.02
>thinkpad_acpi: Lenovo ThinkPad X61
>thinkpad_acpi: radio switch found; radios are enabled
>input: ThinkPad Extra Buttons as /class/input/input6
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>ata3: port disabled. ignoring.
>ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:d3:cc:47:8b
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17kds
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>input: Video Bus as /class/input/input7
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /class/input/input8
>ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
>sdhci: SDHCI controller found at 0000:05:00.2 [1180:0822] (rev 21)
>ACPI: PCI Interrupt 0000:05:00.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:05:00.2 to 64
>mmc0: SDHCI at 0xf8301800 irq 18 DMA
>ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:05:00.1 to 64
>iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>firewire_ohci: Added fw-ohci device 0000:05:00.1, OHCI version 1.10
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>EXT3 FS on sda2, internal journal
>Adding 1052248k swap on /dev/sda3.  Priority:-1 extents:1 across:1052248k
>mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>audit(1193072909.832:3): audit_pid=1534 old=0 by auid=4294967295
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:19:5b:d7:67:1c
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
>wlan0: authenticate with AP 00:19:5b:d7:67:1c
>wlan0: RX authentication from 00:19:5b:d7:67:1c (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:19:5b:d7:67:1c
>wlan0: RX AssocResp from 00:19:5b:d7:67:1c (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: switched to short barker preamble (BSSID=00:19:5b:d7:67:1c)
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>wlan0: no IPv6 routers present
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:19:5b:d7:67:1c
>wlan0: Initial auth_alg=0
>wlan0: authenticate with AP 00:19:5b:d7:67:1c
>wlan0: RX authentication from 00:19:5b:d7:67:1c (alg=0 transaction=2 status=0)
>wlan0: authenticated
>wlan0: associate with AP 00:19:5b:d7:67:1c
>wlan0: authentication frame received from 00:19:5b:d7:67:1c, but not in authenticate state - ignored
>wlan0: RX ReassocResp from 00:19:5b:d7:67:1c (capab=0x421 status=0 aid=1)
>wlan0: associated
>wlan0: no IPv6 routers present
>irq 19: nobody cared (try booting with the "irqpoll" option)
>
>Call Trace:
> <IRQ>  [<ffffffff8106a9bb>] __report_bad_irq+0x30/0x72
> [<ffffffff8106ac0c>] note_interrupt+0x20f/0x253
> [<ffffffff8106b4f8>] handle_fasteoi_irq+0xa9/0xd1
> [<ffffffff8100e0fc>] do_IRQ+0xf1/0x161
> [<ffffffff8100c0e1>] ret_from_intr+0x0/0xa
> <EOI>  [<ffffffff81167830>] acpi_idle_enter_bm+0x2c8/0x33c
> [<ffffffff81167826>] acpi_idle_enter_bm+0x2be/0x33c
> [<ffffffff811d561a>] cpuidle_idle_call+0x74/0xa6
> [<ffffffff811d55a6>] cpuidle_idle_call+0x0/0xa6
> [<ffffffff8100ae8b>] cpu_idle+0x94/0xbc
> [<ffffffff8142fbaa>] start_kernel+0x2cf/0x2db
> [<ffffffff8142f140>] _sinittext+0x140/0x144
>
>handlers:
>[<ffffffff811ab9f7>] (usb_hcd_irq+0x0/0x52)
>Disabling IRQ #19

Actions: View

Attachments on bug 335671: 234281