Attachment 234381 Details for Bug 338551 – dmesg from a succesful boot with a debug kernel

dmesg from a succesful boot with a debug kernel

dmesg.2.6.23.1-26.fc8debug (text/plain), 19.40 KB, created by Michal Jaegermann on 2007-10-22 19:44:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michal Jaegermann

Created: 2007-10-22 19:44:27 UTC

Size: 19.40 KB

patch

obsolete

>Linux version 2.6.23.1-26.fc8debug (kojibuilder@) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-32)) #1 SMP Thu Oct 18 17:00:41 EDT 2007
>Command line: ro root=LABEL=/1 selinux=0 1
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ff30000 (usable)
> BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data)
> BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS)
> BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 130864) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000FA870, 0021 (r2 ACPIAM)
>ACPI: XSDT 1FF30100, 003C (r1 A M I  OEMXSDT   9000323 MSFT       97)
>ACPI: FACP 1FF30290, 00F4 (r3 A M I  OEMFACP   9000323 MSFT       97)
>ACPI: DSDT 1FF303E0, 35D8 (r1  SK8V_ SK8V_013       13 MSFT  100000D)
>ACPI: FACS 1FF40000, 0040
>ACPI: APIC 1FF30390, 004A (r1 A M I  OEMAPIC   9000323 MSFT       97)
>ACPI: OEMB 1FF40040, 003F (r1 A M I  OEMBIOS   9000323 MSFT       97)
>Scanning NUMA topology in Northbridge 24
>CPU has 1 num_cores
>No NUMA configuration found
>Faking a node at 0000000000000000-000000001ff30000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 130864) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000001ff30000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   130864
>On node 0 totalpages: 130767
>  DMA zone: 96 pages used for memmap
>  DMA zone: 2519 pages reserved
>  DMA zone: 1384 pages, LIFO batch:0
>  DMA32 zone: 2971 pages used for memmap
>  DMA32 zone: 123797 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
>swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
>Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 435728 bytes of per cpu data
>Built 1 zonelists in Node order.  Total pages: 125181
>Policy zone: DMA32
>Kernel command line: ro root=LABEL=/1 selinux=0 1
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 16384 bytes)
>Extended CMOS year: 2000
>TSC calibrated against PM_TIMER
>time.c: Detected 1600.061 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1712 kB
> per task-struct memory footprint: 2160 bytes
>Checking aperture...
>CPU 0: aperture @ e0000000 size 256 MB
>Memory: 496936k/523456k available (2536k kernel code, 26132k reserved, 1496k data, 708k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 3203.44 BogoMIPS (lpj=1601724)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0 -> Node 0
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 24k freed
>ACPI: Core revision 20070126
>Parsing all Control Methods:
>Table [DSDT](id 0001) - 524 Objects with 45 Devices 145 Methods 25 Regions
> tbxface-0598 [00] tb_load_namespace     : ACPI Tables successfully acquired
>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
>Using local APIC timer interrupts.
>APIC timer calibration result 12500489
>Detected 12.500 MHz APIC timer.
>Brought up 1 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=96 bytes
>sizeof(inode)=1088 bytes
>sizeof(dentry)=256 bytes
>sizeof(ext3inode)=1488 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=4464 bytes
>khelper used greatest stack depth: 6600 bytes left
>Time: 19:15:11  Date: 10/22/07
>NET: Registered protocol family 16
>khelper used greatest stack depth: 6504 bytes left
>No dock devices found.
>khelper used greatest stack depth: 6336 bytes left
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>evgpeblk-0956 [00] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block
>ACPI: EC: Look up EC in DSDT
>Completing Region/Field/Buffer/Package initialization:...................................................................................................................
>Initialized 21/25 Regions 44/44 Fields 40/40 Buffers 10/12 Packages (533 nodes)
>Initializing Device/Processor/Thermal objects by executing _INI methods:
>Executed 0 _INI methods requiring 0 _STA executions (examined 48 objects)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>Force enabled HPET at base address 0xfed00000
>PCI: enabled onboard AC97/MC97 devices
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 0 of device 0000:00:00.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>agpgart: Detected AGP bridge 0
>agpgart: AGP aperture is 256M @ 0xe0000000
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 32-bit timers, 14318180 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
>pnp: 00:0b: iomem range 0xfff80000-0xffffffff could not be reserved
>pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0e: iomem range 0xc0000-0xdffff has been reserved
>pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0e: iomem range 0x100000-0x1ffeffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: fc900000-fcefffff
>  PREFETCH window: bff00000-dfefffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
>TCP established hash table entries: 16384 (order: 8, 1179648 bytes)
>TCP bind hash table entries: 16384 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3178k freed
>khelper used greatest stack depth: 6320 bytes left
>audit: initializing netlink socket (disabled)
>audit(1193080511.739:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>ksign: Installing public key data
>Loading keyring
>- Added public key 1A693DAD2E9A6D96
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: VIA PCI bridge detected. Disabling DAC.
>PCI: Firmware left 0000:00:0e.0 e100 interrupts enabled, disabling
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Switched to high resolution mode on CPU 0
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Power state transitions not supported
>  Magic number: 11:413:294
>  hash matches device hpet
>  hash matches device tty27
>Freeing unused kernel memory: 708k freed
>Write protecting the kernel read-only data: 1088k
>ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdf00000
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>insmod used greatest stack depth: 5264 bytes left
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b400
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>input: PS/2 Logitech Mouse as /class/input/input2
>ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c400
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>sata_via 0000:00:0f.0: version 2.3
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
>sata_via 0000:00:0f.0: routed to hard irq line 5
>scsi0 : sata_via
>scsi1 : sata_via
>ata1: SATA max UDMA/133 cmd 0x000000000001e800 ctl 0x000000000001e402 bmdma 0x000000000001d400 irq 20
>ata2: SATA max UDMA/133 cmd 0x000000000001e000 ctl 0x000000000001d802 bmdma 0x000000000001d408 irq 20
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-6: WDC WD800JD-00HKA0, 13.03G13, max UDMA/133
>ata1.00: 156301488 sectors, multi 16: LBA 
>ata1.00: configured for UDMA/133
>ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD800JD-00HK 13.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>insmod used greatest stack depth: 3816 bytes left
>sata_promise 0000:00:08.0: version 2.10
>ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 18
>scsi2 : sata_promise
>scsi3 : sata_promise
>scsi4 : sata_promise
>ata3: SATA max UDMA/133 cmd 0xffffc200000f2200 ctl 0xffffc200000f2238 bmdma 0x0000000000000000 irq 18
>ata4: SATA max UDMA/133 cmd 0xffffc200000f2280 ctl 0xffffc200000f22b8 bmdma 0x0000000000000000 irq 18
>ata5: PATA max UDMA/133 cmd 0xffffc200000f2300 ctl 0xffffc200000f2338 bmdma 0x0000000000000000 irq 18
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATA-6: WDC WD2500JD-00GBB0, 02.05D02, max UDMA/100
>ata3.00: 488397168 sectors, multi 0: LBA48 
>ata3.00: applying bridge limits
>ata3.00: configured for UDMA/100
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata4.00: ATA-6: WDC WD2500JD-00GBB0, 02.05D02, max UDMA/100
>ata4.00: 488397168 sectors, multi 0: LBA48 
>ata4.00: applying bridge limits
>ata4.00: configured for UDMA/100
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD2500JD-00G 02.0 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4
>sd 2:0:0:0: [sdb] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access     ATA      WDC WD2500JD-00G 02.0 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 3:0:0:0: [sdc] Attached SCSI disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>sd 3:0:0:0: Attached scsi generic sg2 type 0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Disallowing DAC for device 0000:00:0a.0
>skge 1.11 addr 0xfdb00000 irq 17 chip Yukon rev 1
>skge eth0: addr 00:0e:a6:4a:bf:fa
>ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
>firewire_ohci: Added fw-ohci device 0000:00:07.0, OHCI version 1.0
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 19
>e100: eth1: e100_probe: addr 0xfde00000, irq 19, MAC addr 00:02:B3:A3:60:E4
>pata_via 0000:00:0f.1: version 0.3.2
>ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
>scsi5 : pata_via
>scsi6 : pata_via
>ata6: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001fc00 irq 14
>ata7: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001fc08 irq 15
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ata7.00: ATAPI: _NEC DVD_RW ND-3550A, 1.05, max UDMA/33
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>ata7.00: configured for UDMA/33
>scsi 6:0:0:0: CD-ROM            _NEC     DVD_RW ND-3550A  1.05 PQ: 0 ANSI: 5
>scsi 6:0:0:0: Attached scsi generic sg3 type 5
>gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 981kHz
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 6:0:0:0: Attached scsi CD-ROM sr0
>PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:11.6 to 64
>ACPI: PCI interrupt for device 0000:00:11.6 disabled
>VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
>ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>codec_read: codec 0 is not valid [0xfe0000]
>codec_read: codec 0 is not valid [0xfe0000]
>codec_read: codec 0 is not valid [0xfe0000]
>codec_read: codec 0 is not valid [0xfe0000]
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>EXT3 FS on sda11, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda14, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda13, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda12, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1052216k swap on /dev/sda5.  Priority:-1 extents:1 across:1052216k
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex
>audit(1193080636.208:2): audit_pid=1915 old=0 by auid=4294967295
>w83627hf: Found W83697HF chip at 0x290
>eth1: no IPv6 routers present

Actions: View

Attachments on bug 338551: 234381