Attachment 236051 Details for Bug 211211 – dmesg output before I applied the kernel parameter

dmesg output before I applied the kernel parameter

dmesg_before_kernel_parameters_applied.txt (text/plain), 21.27 KB, created by Willie Engelbrecht on 2007-10-24 09:07:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Willie Engelbrecht

Created: 2007-10-24 09:07:42 UTC

Size: 21.27 KB

patch

obsolete

>Linux version 2.6.18-8.el5 (brewbuilder@ls20-bc1-14.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Fri Jan 26 14:15:14 EST 2007
>Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet crashkernel=128M@16M
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f5ffc00 (usable)
> BIOS-e820: 000000003f5ffc00 - 000000003f601c00 (ACPI NVS)
> BIOS-e820: 000000003f603c00 - 000000003f653c00 (reserved)
> BIOS-e820: 000000003f653c00 - 000000003f655c00 (ACPI data)
> BIOS-e820: 000000003f655c00 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>DMI 2.3 present.
>ACPI: RSDP (v002 DELL                                  ) @ 0x00000000000febf0
>ACPI: XSDT (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x00000000000fce99
>ACPI: FADT (v003 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x00000000000fcfc1
>ACPI: SSDT (v001   DELL    st_ex 0x00001000 INTL 0x20050624) @ 0x00000000fff6e974
>ACPI: MADT (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x00000000000fd0b5
>ACPI: BOOT (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x00000000000fd147
>ACPI: ASF! (v032 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x00000000000fd16f
>ACPI: MCFG (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x00000000000fd201
>ACPI: HPET (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x00000000000fd23f
>ACPI: TCPA (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x00000000000fd49b
>  >>> ERROR: Invalid checksum
>ACPI: SLIC (v001 DELL    B8K     0x00000014 ASL  0x00000061) @ 0x00000000000fd277
>ACPI: DSDT (v001   DELL    dt_ex 0x00001000 INTL 0x20050624) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003f5ff000
>Bootmem setup node 0 0000000000000000-000000003f5ff000
>On node 0 totalpages: 254730
>  DMA zone: 2735 pages, LIFO batch:0
>  DMA32 zone: 251995 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000f0000
>Nosave address range: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>SMP: Allowing 8 CPUs, 6 hotplug CPUs
>Built 1 zonelists.  Total pages: 254730
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet crashkernel=128M@16M
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Checking aperture...
>Memory: 883244k/1038332k available (2397k kernel code, 154700k reserved, 1222k data, 196k init)
>Calibrating delay using timer specific routine.. 5989.86 BogoMIPS (lpj=2994930)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 12469175
>Detected 12.469 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5985.01 BogoMIPS (lpj=2992505)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM1)
>              Intel(R) Pentium(R) D CPU 3.00GHz stepping 05
>Brought up 2 CPUs
>testing NMI watchdog ... OK.
>time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
>time.c: Detected 2992.617 MHz processor.
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=216 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=96 bytes
>sizeof(skbuff)=240 bytes
>migration_cost=1165
>checking if image is initramfs... it is
>Freeing initrd memory: 2329k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>Boot video device is 0000:00:02.0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>PCI-GART: No AMD northbridge found.
>pnp: 00:01: ioport range 0x800-0x85f could not be reserved
>pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:01: ioport range 0x860-0x8ff has been reserved
>pnp: 00:09: ioport range 0x100-0x1fe has been reserved
>pnp: 00:09: ioport range 0x200-0x277 has been reserved
>pnp: 00:09: ioport range 0x280-0x2e7 has been reserved
>pnp: 00:09: ioport range 0x2f0-0x2f7 has been reserved
>pnp: 00:09: ioport range 0x300-0x377 has been reserved
>pnp: 00:09: ioport range 0x380-0x3bb has been reserved
>pnp: 00:09: ioport range 0x3c0-0x3e7 could not be reserved
>pnp: 00:09: ioport range 0x3f6-0x3f7 has been reserved
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: dfc00000-dfcfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: dfb00000-dfbfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: dfa00000-dfafffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x7a set to 0x80
>audit: initializing netlink socket (disabled)
>audit(1193213743.318:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 6E92D7462CAE45D
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>Allocate Port Service[0000:00:1c.4:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x3
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x4
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 965Q Chipset.
>agpgart: Detected 7676K stolen memory.
>agpgart: AGP aperture is 512M @ 0xc0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Probing IDE interface ide0...
>hda: ST3160815AS, ATA DISK drive
>Probing IDE interface ide1...
>hdc: PHILIPS DVD-ROM DROM6316, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: 312500000 sectors (160000 MB) w/8192KiB Cache, CHS=19452/255/63
>hda: cache flushes supported
> hda: hda1 hda2
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 196k freed
>Write protecting the kernel read-only data: 460k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 169, io base 0x0000ff20
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>GSI 17 sharing vector 0xD1 and IRQ 17
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 209, io base 0x0000ff00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>GSI 18 sharing vector 0xD9 and IRQ 18
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 217, io base 0x0000ff80
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 209, io base 0x0000ff60
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>GSI 19 sharing vector 0xE1 and IRQ 19
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 225, io base 0x0000ff40
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-1: configuration #1 chosen from 1 choice
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 3 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>GSI 20 sharing vector 0xE9 and IRQ 20
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 233
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 233, io mem 0xdfdfbc00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 217, io mem 0xff980800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>usb 1-1: USB disconnect, address 2
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.2: version 2.00
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>GSI 21 sharing vector 0x32 and IRQ 21
>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 50
>ata: 0x1f0 IDE port busy
>ata: 0x170 IDE port busy
>ata_piix: probe of 0000:00:1f.2 failed with error -16
>ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 20 (level, low) -> IRQ 50
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata1: SATA max UDMA/133 cmd 0xFE40 ctl 0xFE52 bmdma 0xFED0 irq 50
>ata2: SATA max UDMA/133 cmd 0xFE60 ctl 0xFE72 bmdma 0xFED8 irq 50
>scsi0 : ata_piix
>usb 1-1: new full speed USB device using uhci_hcd and address 3
>usb 1-1: configuration #1 chosen from 1 choice
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 3 ports detected
>usb 1-2: new low speed USB device using uhci_hcd and address 4
>usb 1-2: configuration #1 chosen from 1 choice
>input: Microsoft Basic Optical Mouse as /class/input/input0
>input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1a.0-2
>usb 1-1.1: new full speed USB device using uhci_hcd and address 5
>usb 1-1.1: configuration #1 chosen from 1 choice
>input: Acer Generic USB Hub Keyboard as /class/input/input1
>input: USB HID v1.10 Keyboard [Acer Generic USB Hub Keyboard] on usb-0000:00:1a.0-1.1
>input: Acer Generic USB Hub Keyboard as /class/input/input2
>input: USB HID v1.10 Device [Acer Generic USB Hub Keyboard] on usb-0000:00:1a.0-1.1
>ata1: port is slow to respond, this delay is known to occur on vacant SATA ports
>ata1: port failed to respond (30 secs)
>ata1: SRST failed (status 0xFF)
>ata1: SRST failed (err_mask=0x100)
>ata1: softreset failed, retrying in 5 secs
>ata1: SRST failed (status 0xFF)
>ata1: SRST failed (err_mask=0x100)
>ata1: softreset failed, retrying in 5 secs
>ata1: SRST failed (status 0xFF)
>ata1: SRST failed (err_mask=0x100)
>ata1: reset failed, giving up
>scsi1 : ata_piix
>ata2: port is slow to respond, this delay is known to occur on vacant SATA ports
>ata2: port failed to respond (30 secs)
>ata2: SRST failed (status 0xFF)
>ata2: SRST failed (err_mask=0x100)
>ata2: softreset failed, retrying in 5 secs
>ata2: SRST failed (status 0xFF)
>ata2: SRST failed (err_mask=0x100)
>ata2: softreset failed, retrying in 5 secs
>ata2: SRST failed (status 0xFF)
>ata2: SRST failed (err_mask=0x100)
>ata2: reset failed, giving up
>device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>Losing some ticks... checking if CPU frequency changed.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1193213837.158:2): selinux=0 auid=4294967295
>tg3.c:v3.65-rh (November 20, 2006)
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>eth0: Tigon3 [partno(BCM95754) rev b002 PHY(5787)] (PCI Express) 10/100/1000BaseT Ethernet 00:1a:a0:aa:81:d6
>eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>input: PC Speaker as /class/input/input3
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
>Uniform CD-ROM driver Revision: 3.20
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 20 (level, low) -> IRQ 50
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>warning: many lost ticks.
>Your time source seems to be instable or some driver is hogging interupts
>rip __do_softirq+0x53/0xd5
>Falling back to HPET
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [VBTN]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (4055 buckets, 32440 max) - 304 bytes per conntrack
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
>PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100406, writing 100006)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>audit(1193213870.824:3): audit_pid=2183 old=0 by auid=4294967295
>eth0: no IPv6 routers present
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>[drm] Initialized drm 1.0.1 20051102
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
>[drm] Initialized i915 1.5.0 20060119 on minor 0
>mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining

Actions: View

Attachments on bug 211211: 138726 | 138788 | 139240 | 139588 | 139782 | 236051 | 236061