Attachment 237431 Details for Bug 300861 – Mako system dmesg

Mako system dmesg

mako.dmesg.txt (text/plain), 17.80 KB, created by Bhavna Sarathy on 2007-10-25 15:00:19 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bhavna Sarathy

Created: 2007-10-25 15:00:19 UTC

Size: 17.80 KB

patch

obsolete

>Bootdata ok (command line is ro root=/dev/VolGroup01/LogVol00 rhgb quiet)
>Linux version 2.6.9-64.ELsmp (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc vers
>ion 3.4.6 20060404 (Red Hat 3.4.6-8)) #1 SMP Wed Oct 17 17:15:46 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cffa0000 (usable)
> BIOS-e820: 00000000cffa0000 - 00000000cffae000 (ACPI data)
> BIOS-e820: 00000000cffae000 - 00000000cfff0000 (ACPI NVS)
> BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>ACPI: RSDP (v000 ACPIAM                                ) @ 0x00000000000fa6a0
>ACPI: RSDT (v001 072807 RSDT1526 0x20070728 MSFT 0x00000097) @ 0x00000000cffa000
>0
>ACPI: FADT (v002 072807 FACP1526 0x20070728 MSFT 0x00000097) @ 0x00000000cffa020
>0
>ACPI: MADT (v001 072807 APIC1526 0x20070728 MSFT 0x00000097) @ 0x00000000cffa039
>0
>ACPI: GFCM (v001 072807 OEMMCFG  0x20070728 MSFT 0x00000097) @ 0x00000000cffa040
>0
>ACPI: OEMB (v001 072807 OEMB1526 0x20070728 MSFT 0x00000097) @ 0x00000000cffae04
>0
>ACPI: HPET (v001 072807 OEMHPET  0x20070728 MSFT 0x00000097) @ 0x00000000cffa5cf
>0
>ACPI: SSDT (v001 A M I  POWERNOW 0x00000001 AMD  0x00000001) @ 0x00000000cffa5d3
>0
>ACPI: DSDT (v001  MMKA0 MMKA03-8 0x00000000 INTL 0x20051117) @ 0x000000000000000
>0
>Enabling SRAT NUMA discovery
>Warning: acpi_table_parse(ACPI_SRAT) returned 0!
>Warning: acpi_table_parse(ACPI_SLIT) returned 0!
>acpi_numa_init() failed, disabling ACPI NUMA config
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000130000000
>Bootmem setup node 0 0000000000000000-0000000130000000
>On node 0 totalpages: 1245184
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 1241088 pages, LIFO batch:16
>  HighMem zone: 0 pages, LIFO batch:1
>DMI present.
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:2 APIC version 16
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>Processor #2 15:2 APIC version 16
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>Processor #3 15:2 APIC version 16
>Setting APIC routing to flat
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: HPET id: 0x8300 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at d4000000 (gap: d0000000:30000000)
>Checking aperture...
>Built 1 zonelists
>Kernel command line: ro root=/dev/VolGroup01/LogVol00 rhgb quiet console=tty0
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 14.318180 MHz HPET timer.
>time.c: Detected 2012.322 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Placing software IO TLB between 0x1ca3000 - 0x5ca3000
>Memory: 4040212k/4980736k available (2126k kernel code, 0k reserved, 1313k data,
> 212k init)
>Calibrating delay using timer specific routine.. 4127.50 BogoMIPS (lpj=2063750)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0(4) -> Node 0
>Using local APIC NMI watchdog using perfctr0
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0(4) -> Node 0
>CPU0: AMD Engineering Sample stepping 00
>per-CPU timeslice cutoff: 512.04 usecs.
>task migration cache decay timeout: 0 msecs.
>Booting processor 1/1 rip 6000 rsp 10005d55f58
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4000.77 BogoMIPS (lpj=2000386)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1(4) -> Node 0
>AMD Engineering Sample stepping 00
>Booting processor 2/2 rip 6000 rsp 1012bd0df58
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 3999.22 BogoMIPS (lpj=1999614)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 2(4) -> Node 0
>AMD Engineering Sample stepping 00
>Booting processor 3/3 rip 6000 rsp 1012bd43f58
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 4000.24 BogoMIPS (lpj=2000122)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 3(4) -> Node 0
>AMD Engineering Sample stepping 00
>Total of 4 processors activated (16127.74 BogoMIPS).
>Using local APIC timer interrupts.
>Detected 12.577 MHz APIC timer.
>checking TSC synchronization across 4 CPUs: passed.
>Brought up 4 CPUs
>time.c: Using HPET/TSC based timekeeping.
>checking if image is initramfs... it is
>NET: Registered protocol family 16
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040816
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>Error attaching device data
>Error attaching device data
>Error attaching device data
>Error attaching device data
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 169
>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 177
>GSI 18 sharing vector 0xB9 and IRQ 18
>ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 185
>GSI 19 sharing vector 0xC1 and IRQ 19
>ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 193
>ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 185
>ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 193
>GSI 20 sharing vector 0xC9 and IRQ 20
>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 201
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 177
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 177
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 193
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 185
>ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 18 (level, low) -> IRQ 193
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 193
>PCI: Cannot allocate resource region 3 of device 0000:00:00.0
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1193319097.626:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key FA5FF4986596444B
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [P001] (supports C1, 8 throttling states)
>ACPI: Processor [P002] (supports C1)
>ACPI: Processor [P003] (supports C1)
>ACPI: Processor [P004] (supports C1)
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.100 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SB600_PATA: IDE controller at PCI slot 0000:00:14.1
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 177
>SB600_PATA: chipset revision 0
>SB600_PATA: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
>Probing IDE interface ide0...
>hda: SONY DVD-ROM DDU1615, ATAPI CD/DVD-ROM drive
>Using cfq io scheduler
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide2...
>Probing IDE interface ide3...
>Probing IDE interface ide4...
>Probing IDE interface ide5...
>hda: ATAPI 40X DVD-ROM drive, 1727kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard on isa0060/serio0
>input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 262144 bind 262144)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Engineering Sample processors (4 cpu cores) (version 2.
>00.00-rhel4)
>powernow-k8:    0 : fid 0x4 gid 0x0 (2000 MHz)
>powernow-k8:    1 : fid 0x4 gid 0x1 (1000 MHz)
>powernow-k8:    0 : fid 0x4 gid 0x0 (2000 MHz)
>powernow-k8:    1 : fid 0x4 gid 0x1 (1000 MHz)
>powernow-k8:    0 : fid 0x4 gid 0x0 (2000 MHz)
>powernow-k8:    1 : fid 0x4 gid 0x1 (1000 MHz)
>powernow-k8:    0 : fid 0x4 gid 0x0 (2000 MHz)
>powernow-k8:    1 : fid 0x4 gid 0x1 (1000 MHz)
>ACPI wakeup devices: 
>PCE2 PCE3 PCE4 PCE5 PCE6 PCE7 PCE9 PCEA PCEB PCEC SBAZ PS2K PS2M P0PC AC97 MC97 
>USB1 USB2 USB3 USB4 USB5 EUSB PWRB 
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 212k freed
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ahci 0000:00:12.0: version 2.0
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 169
>MSI INIT SUCCESS
>ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part 
>ata1: SATA max UDMA/133 cmd 0xFFFFFF0000024900 ctl 0x0 bmdma 0x0 irq 169
>ata2: SATA max UDMA/133 cmd 0xFFFFFF0000024980 ctl 0x0 bmdma 0x0 irq 169
>ata3: SATA max UDMA/133 cmd 0xFFFFFF0000024A00 ctl 0x0 bmdma 0x0 irq 169
>ata4: SATA max UDMA/133 cmd 0xFFFFFF0000024A80 ctl 0x0 bmdma 0x0 irq 169
>scsi0 : ahci
>ata1: SATA link down (SStatus 0 SControl 300)
>scsi1 : ahci
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATA-7, max UDMA/133, 234441648 sectors: LBA48 NCQ (depth 31/32)
>ata2.00: ata2: dev 0 multi count 16
>ata2.00: configured for UDMA/133
>scsi2 : ahci
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-7, max UDMA/133, 234441648 sectors: LBA48 NCQ (depth 31/32)
>ata3.00: ata3: dev 0 multi count 16
>ata3.00: configured for UDMA/133
>scsi3 : ahci
>ata4: SATA link down (SStatus 0 SControl 300)
>  Vendor: ATA       Model: ST3120811AS       Rev: 3.AA
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2
>Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
>  Vendor: ATA       Model: WDC WD1200JS-00S  Rev: 20.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
>SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2
>Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>ata5: SATA max UDMA/133 cmd 0xFFFFFF0000028100 ctl 0x0 bmdma 0x0 irq 185
>ata6: SATA max UDMA/133 cmd 0xFFFFFF0000028180 ctl 0x0 bmdma 0x0 irq 185
>scsi4 : ahci
>ata5: SATA link down (SStatus 0 SControl 300)
>scsi5 : ahci
>ata6: SATA link down (SStatus 0 SControl 300)
>PCI: Enabling device 0000:02:00.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 18 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:02:00.1 to 64
>ata7: PATA max UDMA/100 cmd 0xD800 ctl 0xD402 bmdma 0xC400 irq 193
>ata8: PATA max UDMA/100 cmd 0xD000 ctl 0xC802 bmdma 0xC408 irq 193
>scsi6 : pata_jmicron
>scsi7 : pata_jmicron
>device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com
>cdrom: open failed.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>inserting floppy driver for 2.6.9-64.ELsmp
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>sky2 v1.6 addr 0xfebfc000 irq 193 Yukon-EC (0xb6) rev 2
>divert: allocating divert_blk for eth0
>sky2 eth0: addr 00:0c:87:00:40:34
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 177
>hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 201
>ehci_hcd 0000:00:13.5: EHCI Host Controller
>ehci_hcd 0000:00:13.5: irq 201, pci mem ffffff000002c000
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.5: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 177
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: irq 177, pci mem ffffff000002e000
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 185
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: irq 185, pci mem ffffff0000032000
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 193
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: irq 193, pci mem ffffff0000034000
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 185
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>ohci_hcd 0000:00:13.3: irq 185, pci mem ffffff0000036000
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 193
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>ohci_hcd 0000:00:13.4: irq 193, pci mem ffffff000003e000
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device ffffffff8040d1a0(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divert_blk for non-ethernet device sit0
>ACPI: Power Button (FF) [PWRF]
>EXT3 FS on dm-0, internal journal
>cdrom: open failed.
>loop: loaded (max 8 devices)
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1
>Adding 2031608k swap on /dev/VolGroup01/LogVol01.  Priority:-2 extents:1
>cdrom: open failed.
>cdrom: open failed.
>cdrom: open failed.
>Linux Kernel Card Services
>  options:  [pci] [cardbus] [pm]
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>sky2 eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control none
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>i2c /dev entries driver
>lp: driver loaded but no devices found
>

Actions: View

Attachments on bug 300861: 210631 | 210641 | 229871 | 237431 | 237441 | 291697 | 301502 | 301603 | 312501