Attachment 237761 Details for Bug 339441 – The requested syslog

The requested syslog

syslog (text/plain), 30.25 KB, created by Micke on 2007-10-25 18:56:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Micke

Created: 2007-10-25 18:56:00 UTC

Size: 30.25 KB

patch

obsolete

><5>Linux version 2.6.21-1.3194.fc7 (kojibuilder@hammer2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:47:07 EDT 2007
><6>Command line: initrd=initrd.img BOOT_IMAGE=vmlinuz 
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
><4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 0000000077fb0000 (usable)
><4> BIOS-e820: 0000000077fb0000 - 0000000077fbe000 (ACPI data)
><4> BIOS-e820: 0000000077fbe000 - 0000000077fe0000 (ACPI NVS)
><4> BIOS-e820: 0000000077fe0000 - 0000000078000000 (reserved)
><4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
><7>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 491440) 1 entries of 3200 used
><4>end_pfn_map = 1048576
><6>DMI present.
><4>ACPI: RSDP 000FB430, 0014 (r0 ACPIAM)
><4>ACPI: RSDT 77FB0000, 0040 (r1 _ASUS_ Notebook  6000704 MSFT       97)
><4>ACPI: FACP 77FB0200, 0084 (r2 A M I  OEMFACP   6000704 MSFT       97)
><4>ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r2 C-state control [20070126]
><4>ACPI: DSDT 77FB05B0, 6929 (r1  A0725 A0725001        1 INTL 20051117)
><4>ACPI: FACS 77FBE000, 0040
><4>ACPI: APIC 77FB0390, 005C (r1 A M I  OEMAPIC   6000704 MSFT       97)
><4>ACPI: MCFG 77FB03F0, 003C (r1 A M I  OEMMCFG   6000704 MSFT       97)
><4>ACPI: SLIC 77FB0430, 0176 (r1 _ASUS_ Notebook  6000704 MSFT       97)
><4>ACPI: OEMB 77FBE040, 0080 (r1 A M I  AMI_OEM   6000704 MSFT       97)
><4>ACPI: HPET 77FB6EE0, 0038 (r1 A M I  OEMHPET   6000704 MSFT       97)
><4>ACPI: SSDT 77FB6F20, 0206 (r1 A_M_I_ POWERNOW        1 AMD         1)
><6>Scanning NUMA topology in Northbridge 24
><6>Number of nodes 1
><6>Node 0 MemBase 0000000000000000 Limit 0000000077fb0000
><7>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 491440) 1 entries of 3200 used
><7>NUMA: Using 63 for the hash shift.
><6>Using node hash shift of 63
><6>Bootmem setup node 0 0000000000000000-0000000077fb0000
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  DMA32        4096 ->  1048576
><4>  Normal    1048576 ->  1048576
><4>early_node_map[2] active PFN ranges
><4>    0:        0 ->      159
><4>    0:      256 ->   491440
><7>On node 0 totalpages: 491343
><7>  DMA zone: 56 pages used for memmap
><7>  DMA zone: 1279 pages reserved
><7>  DMA zone: 2664 pages, LIFO batch:0
><7>  DMA32 zone: 6662 pages used for memmap
><7>  DMA32 zone: 480682 pages, LIFO batch:31
><7>  Normal zone: 0 pages used for memmap
><6>ATI board detected. Disabling timer routing over 8254.
><6>ACPI: PM-Timer IO Port: 0x808
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
><6>Processor #0 (Bootup-CPU)
><6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
><6>Processor #1
><6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
><6>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><7>ACPI: IRQ9 used by override.
><6>Setting APIC routing to physical flat
><6>ACPI: HPET id: 0x8300 base: 0xfed00000
><6>Using ACPI (MADT) for SMP configuration information
><4>Nosave address range: 000000000009f000 - 00000000000a0000
><4>Nosave address range: 00000000000a0000 - 00000000000e4000
><4>Nosave address range: 00000000000e4000 - 0000000000100000
><6>Allocating PCI resources starting at 80000000 (gap: 78000000:87f00000)
><6>SMP: Allowing 2 CPUs, 0 hotplug CPUs
><6>PERCPU: Allocating 43648 bytes of per cpu data
><4>Built 1 zonelists.  Total pages: 483346
><5>Kernel command line: initrd=initrd.img BOOT_IMAGE=vmlinuz 
><4>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 32768 bytes)
><6>time.c: Detected 2094.758 MHz processor.
><4>Console: colour VGA+ 80x25
><4>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
><4>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
><4>Checking aperture...
><4>CPU 0: aperture @ e804000000 size 32 MB
><4>Aperture too small (32 MB)
><4>No AGP bridge found
><4>Memory: 1924468k/1965760k available (2319k kernel code, 40904k reserved, 1375k data, 316k init)
><4>Calibrating delay using timer specific routine.. 4295.37 BogoMIPS (lpj=2147686)
><6>Security Framework v1.0.0 initialized
><6>SELinux:  Initializing.
><7>SELinux:  Starting in permissive mode
><6>selinux_register_security:  Registering secondary module capability
><6>Capability LSM initialized as secondary
><4>Mount-cache hash table entries: 256
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 512K (64 bytes/line)
><6>CPU 0/0 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 0
><6>SMP alternatives: switching to UP code
><6>ACPI: Core revision 20070126
><6>Using local APIC timer interrupts.
><4>result 12468814
><6>Detected 12.468 MHz APIC timer.
><6>SMP alternatives: switching to SMP code
><6>Booting processor 1/2 APIC 0x1
><4>Initializing CPU#1
><4>Calibrating delay using timer specific routine.. 4189.48 BogoMIPS (lpj=2094743)
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 512K (64 bytes/line)
><6>CPU 1/1 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 1
><4>AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01
><6>Brought up 2 CPUs
><7>sizeof(vma)=176 bytes
><7>sizeof(page)=56 bytes
><7>sizeof(inode)=560 bytes
><7>sizeof(dentry)=208 bytes
><7>sizeof(ext3inode)=760 bytes
><7>sizeof(buffer_head)=104 bytes
><7>sizeof(skbuff)=248 bytes
><7>sizeof(task_struct)=1888 bytes
><4>migration_cost=231
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: Using configuration type 1
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S1 S3 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><4>Error attaching device data
><4>Error attaching device data
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><7>Boot video device is 0000:01:05.0
><6>PCI: Transparent bridge - 0000:00:14.4
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 10 11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKF] (IRQs *9)
><4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>pnp: PnP ACPI: found 15 devices
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><6>NetLabel: Initializing
><6>NetLabel:  domain hash size = 128
><6>NetLabel:  protocols = UNLABELED CIPSOv4
><6>NetLabel:  unlabeled traffic allowed by default
><6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
><6>hpet0: 4 32-bit timers, 14318180 Hz
><6>pnp: 00:01: iomem range 0x78000000-0x7fffffff has been reserved
><6>Time: hpet clocksource has been installed.
><6>pnp: 00:07: iomem range 0xffb80000-0xffbfffff has been reserved
><6>pnp: 00:07: iomem range 0xfff00000-0xffffffff could not be reserved
><6>pnp: 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
><6>pnp: 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
><6>pnp: 00:08: iomem range 0xfe000000-0xfe00001f has been reserved
><6>pnp: 00:0b: ioport range 0x230-0x23f has been reserved
><6>pnp: 00:0b: ioport range 0x290-0x29f has been reserved
><6>pnp: 00:0b: ioport range 0xa20-0xa2f has been reserved
><6>pnp: 00:0b: ioport range 0xa30-0xa3f has been reserved
><6>pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
><6>pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
><6>pnp: 00:0e: iomem range 0xc0000-0xcffff has been reserved
><6>pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
><6>pnp: 00:0e: iomem range 0x100000-0x77ffffff could not be reserved
><4>PCI: Ignore bogus resource 6 [0:0] of 0000:01:05.0
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: d000-dfff
><6>  MEM window: fe800000-fe9fffff
><6>  PREFETCH window: f0000000-f7ffffff
><6>PCI: Bridge: 0000:00:06.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:07.0
><6>  IO window: disabled.
><6>  MEM window: fea00000-feafffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:14.4
><6>  IO window: e000-efff
><6>  MEM window: feb00000-febfffff
><6>  PREFETCH window: disabled.
><7>PCI: Setting latency timer of device 0000:00:06.0 to 64
><7>PCI: Setting latency timer of device 0000:00:07.0 to 64
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
><4>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
><4>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
><6>TCP: Hash tables configured (established 131072 bind 65536)
><6>TCP reno registered
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 5563k freed
><6>audit: initializing netlink socket (disabled)
><5>audit(1193328447.032:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><7>SELinux:  Registering netfilter hooks
><4>ksign: Installing public key data
><4>Loading keyring
><4>- Added public key F2580AE679027173
><4>- User ID: Red Hat, Inc. (Kernel Module GPG key)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>PCI: Setting latency timer of device 0000:00:06.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:06.0:pcie00]
><7>Allocate Port Service[0000:00:06.0:pcie02]
><7>PCI: Setting latency timer of device 0000:00:07.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:07.0:pcie00]
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><4>ACPI: duty_cycle spans bit 4
><6>Real Time Clock Driver v1.12ac
><7>hpet_resources: 0xfed00000 is busy
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.102 (c) Dave Jones
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><4>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
><6>input: Macintosh mouse button emulation as /class/input/input0
><6>usbcore: registered new interface driver libusual
><6>usbcore: registered new interface driver hiddev
><6>usbcore: registered new interface driver usbhid
><6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
><6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /class/input/input1
><6>TCP bic registered
><6>Initializing XFRM netlink socket
><6>NET: Registered protocol family 1
><6>NET: Registered protocol family 17
><6>powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ processors (version 2.00.00)
><6>powernow-k8:    0 : fid 0xd (2100 MHz), vid 0xc
><6>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xd
><6>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xf
><6>powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
><4>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
><6>Freeing unused kernel memory: 316k freed
><4>Write protecting the kernel read-only data: 1032k
><6>loop: loaded (max 8 devices)
><6>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
><4>floppy0: no floppy controllers found
><6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
><6>input: PC Speaker as /class/input/input3
><6>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
><6>NET: Registered protocol family 10
><6>lo: Disabled Privacy Extensions
><6>Mobile IPv6
><5>SCSI subsystem initialized
><6>Loading iSCSI transport class v2.0-724.
><5>iscsi: registered transport (tcp)
><6>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
><6>ehci_hcd 0000:00:13.5: EHCI Host Controller
><6>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
><6>ehci_hcd 0000:00:13.5: debug port 1
><6>ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe7ff000
><6>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 10 ports detected
><7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
><6>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
><6>ohci_hcd 0000:00:13.0: OHCI Host Controller
><6>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
><6>ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe7fe000
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><6>usb 1-9: new high speed USB device using ehci_hcd and address 2
><6>ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
><6>ohci_hcd 0000:00:13.1: OHCI Host Controller
><6>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
><6>ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe7fd000
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><6>usb 1-9: configuration #1 chosen from 1 choice
><6>ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
><6>ohci_hcd 0000:00:13.2: OHCI Host Controller
><6>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
><6>ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe7fc000
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
><6>ohci_hcd 0000:00:13.3: OHCI Host Controller
><6>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
><6>ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe7fb000
><6>usb usb5: configuration #1 chosen from 1 choice
><6>hub 5-0:1.0: USB hub found
><6>hub 5-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
><6>ohci_hcd 0000:00:13.4: OHCI Host Controller
><6>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
><6>ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe7fa000
><6>usb usb6: configuration #1 chosen from 1 choice
><6>hub 6-0:1.0: USB hub found
><6>hub 6-0:1.0: 2 ports detected
><6>Initializing USB Mass Storage driver...
><6>scsi0 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 2
><7>usb-storage: waiting for device to settle before scanning
><6>usbcore: registered new interface driver usb-storage
><6>USB Mass Storage support registered.
><7>usb-storage: device scan complete
><5>scsi 0:0:0:0: Direct-Access     Generic  2.0 Reader-CF    1.00 PQ: 0 ANSI: 0 CCS
><5>scsi 0:0:0:1: Direct-Access     Generic  2.0 Reader-Multi 1.00 PQ: 0 ANSI: 0 CCS
><5>sd 0:0:0:0: Attached scsi removable disk sda
><5>sd 0:0:0:1: Attached scsi removable disk sdb
><6>ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 21 (level, low) -> IRQ 21
><5>fw_ohci: Added fw-ohci device 0000:04:03.0, OHCI version 1.10
><5>fw_core: created new fw device fw0 (0 config rom retries)
><6>usbcore: deregistering interface driver usb-storage
><6>Attansic L1 Ethernet Network Driver - version 2.0.7
><6>Copyright(c) 2005-2006 Attansic Corporation.
><6>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:03:00.0 to 64
><7>libata version 2.20 loaded.
><6>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:14.1 to 64
><6>ata1: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ff00 irq 14
><6>ata2: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ff08 irq 15
><6>scsi1 : pata_atiixp
><6>ata1.00: ATAPI, max UDMA/33
><6>ata1.00: configured for UDMA/33
><6>scsi2 : pata_atiixp
><5>scsi 1:0:0:0: CD-ROM            _NEC     DVD_RW ND-2500A  1.06 PQ: 0 ANSI: 5
><4>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 1:0:0:0: Attached scsi CD-ROM sr0
><7>ahci 0000:00:12.0: version 2.1
><6>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
><6>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
><6>ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part 
><6>ata3: SATA max UDMA/133 cmd 0xffffc20000044900 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22
><6>ata4: SATA max UDMA/133 cmd 0xffffc20000044980 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22
><6>ata5: SATA max UDMA/133 cmd 0xffffc20000044a00 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22
><6>ata6: SATA max UDMA/133 cmd 0xffffc20000044a80 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 22
><6>scsi3 : ahci
><6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>ata3.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
><6>ata3.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
><6>ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
><6>ata3.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
><6>ata3.00: configured for UDMA/133
><6>scsi4 : ahci
><6>ata4: SATA link down (SStatus 0 SControl 300)
><6>scsi5 : ahci
><6>ata5: SATA link down (SStatus 0 SControl 300)
><6>scsi6 : ahci
><6>ata6: SATA link down (SStatus 0 SControl 300)
><5>scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD321KJ  CP10 PQ: 0 ANSI: 5
><5>SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda: sda1 sda2 sda3 sda4 < sda5 >
><5>sd 3:0:0:0: Attached scsi disk sda
><6>Initializing USB Mass Storage driver...
><6>scsi7 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 2
><7>usb-storage: waiting for device to settle before scanning
><6>usbcore: registered new interface driver usb-storage
><6>USB Mass Storage support registered.
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><4>Unable to identify CD-ROM format.
><4>VFS: Can't find an ext2 filesystem on dev loop0.
><7>usb-storage: device scan complete
><5>scsi 7:0:0:0: Direct-Access     Generic  2.0 Reader-CF    1.00 PQ: 0 ANSI: 0 CCS
><5>scsi 7:0:0:1: Direct-Access     Generic  2.0 Reader-Multi 1.00 PQ: 0 ANSI: 0 CCS
><5>sd 7:0:0:0: Attached scsi removable disk sdb
><5>sd 7:0:0:1: Attached scsi removable disk sdc
><7>security:  3 users, 6 roles, 1816 types, 78 bools, 1 sens, 1024 cats
><7>security:  60 classes, 65638 rules
><7>SELinux:  Completing initialization.
><7>SELinux:  Setting up existing superblocks.
><7>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
><7>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
><7>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
><7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
><7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
><7>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
><7>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
><7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
><7>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
><7>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
><7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
><7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
><7>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
><7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
><7>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
><7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
><7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
><5>audit(1193328477.299:2): policy loaded auid=4294967295
><6>md: raid0 personality registered for level 0
><6>md: raid1 personality registered for level 1
><6>raid5: automatically using best checksumming function: generic_sse
><4>   generic_sse:  6428.000 MB/sec
><4>raid5: using function: generic_sse (6428.000 MB/sec)
><4>raid6: int64x1   1781 MB/s
><4>raid6: int64x2   2429 MB/s
><4>raid6: int64x4   1871 MB/s
><4>raid6: int64x8   1847 MB/s
><4>raid6: sse2x1    2871 MB/s
><4>raid6: sse2x2    3835 MB/s
><4>raid6: sse2x4    4019 MB/s
><4>raid6: using algorithm sse2x4 (4019 MB/s)
><6>md: raid6 personality registered for level 6
><6>md: raid5 personality registered for level 5
><6>md: raid4 personality registered for level 4
><6>md: raid10 personality registered for level 10
><4>GFS2 (built May 23 2007 22:49:52) installed
><6>Lock_Nolock (built May 23 2007 22:50:10) installed
><6>JFS: nTxBlock = 8192, nTxLock = 65536
><6>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
><6>SGI XFS Quota Management subsystem
><6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
><6>device-mapper: multipath: version 1.0.5 loaded
><6>device-mapper: multipath round-robin: version 1.0.0 loaded
><6>device-mapper: multipath emc: version 0.0.3 loaded
><5>audit(1193328487.168:3): audit_pid=836 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0
><6>ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 18 (level, low) -> IRQ 18
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev dm-0, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda3, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev sda3, type ext3), uses xattr
><6>Adding 2031608k swap on /dev/VolGroupP2/LogVol01.  Priority:-1 extents:1 across:2031608k
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on dm-0, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev dm-0, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda3, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev sda3, type ext3), uses xattr
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><3>Buffer I/O error on device sr0, logical block 95921
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b2
><4>end_request: I/O error, dev sr0, sector 383688
><3>Buffer I/O error on device sr0, logical block 95922
><3>Buffer I/O error on device sr0, logical block 95923
><3>Buffer I/O error on device sr0, logical block 95924
><3>Buffer I/O error on device sr0, logical block 95925
><3>Buffer I/O error on device sr0, logical block 95926
><3>Buffer I/O error on device sr0, logical block 95927
><3>Buffer I/O error on device sr0, logical block 95928
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><3>Buffer I/O error on device sr0, logical block 95921
><3>Buffer I/O error on device sr0, logical block 95922
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b9
><4>end_request: I/O error, dev sr0, sector 383716
><3>Buffer I/O error on device sr0, logical block 95929
><3>Buffer I/O error on device sr0, logical block 95930
><3>Buffer I/O error on device sr0, logical block 95931
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><4>printk: 13 messages suppressed.
><3>Buffer I/O error on device sr0, logical block 95921
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><4>printk: 1 messages suppressed.
><3>Buffer I/O error on device sr0, logical block 95921
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><4>printk: 1 messages suppressed.
><3>Buffer I/O error on device sr0, logical block 95921
><3>Buffer I/O error on device sr0, logical block 95922
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><3>Buffer I/O error on device sr0, logical block 95921
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><4>printk: 1 messages suppressed.
><3>Buffer I/O error on device sr0, logical block 95921
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><4>printk: 1 messages suppressed.
><3>Buffer I/O error on device sr0, logical block 95921
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><4>printk: 1 messages suppressed.
><3>Buffer I/O error on device sr0, logical block 95921
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><4>printk: 1 messages suppressed.
><3>Buffer I/O error on device sr0, logical block 95921
><3>Buffer I/O error on device sr0, logical block 95922
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><3>Buffer I/O error on device sr0, logical block 95921
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><4>printk: 1 messages suppressed.
><3>Buffer I/O error on device sr0, logical block 95921
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><4>printk: 1 messages suppressed.
><3>Buffer I/O error on device sr0, logical block 95921
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><4>printk: 1 messages suppressed.
><3>Buffer I/O error on device sr0, logical block 95921
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><4>printk: 1 messages suppressed.
><3>Buffer I/O error on device sr0, logical block 95921
><3>Buffer I/O error on device sr0, logical block 95922
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><3>Buffer I/O error on device sr0, logical block 95921
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><4>printk: 1 messages suppressed.
><3>Buffer I/O error on device sr0, logical block 95921
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><4>printk: 1 messages suppressed.
><3>Buffer I/O error on device sr0, logical block 95921
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><4>printk: 1 messages suppressed.
><3>Buffer I/O error on device sr0, logical block 95921
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><4>printk: 1 messages suppressed.
><3>Buffer I/O error on device sr0, logical block 95921
><3>Buffer I/O error on device sr0, logical block 95922
><6>sr 1:0:0:0: SCSI error: return code = 0x08000002
><6>sr0: Current: sense key: Medium Error
><6>    Additional sense: No seek complete
><6>Info fld=0x176b1
><4>end_request: I/O error, dev sr0, sector 383684
><3>Buffer I/O error on device sr0, logical block 95921
><7>SELinux: initialized (dev sda2, type vfat), uses genfs_contexts

Actions: View

Attachments on bug 339441: 237761 | 237771