Attachment 239451 Details for Bug 251371 – console output during failing CDRW

console output during failing CDRW

console-testfail-blankCDRW.txt (text/plain), 9.83 KB, created by Gregory Feiner on 2007-10-26 19:40:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gregory Feiner

Created: 2007-10-26 19:40:03 UTC

Size: 9.83 KB

patch

obsolete

>[root@iprh5 ~]# hts certify --test=cdrom
>loaded configuration /var/hts/config.xml
>loaded plan /var/hts/plan.xml
>running only test cdrom 
>running cdrom on /org/freedesktop/Hal/devices/storage_model_DVD_RAM_GSA_H60L
>mkdir -p /tmp/hts-cdrom-YiBKSq/mnt/tests/HTS/hts/cdrom
>cp -a testinfo.desc runtest.sh cdrom.py Makefile /tmp/hts-cdrom-YiBKSq/mnt/tests/HTS/hts/cdrom
>install -m 0755 runtest.sh /tmp/hts-cdrom-YiBKSq/mnt/tests/HTS/hts/cdrom
>make OUTPUTFILE=/var/log/hts/runs/1/cdrom/output.log RUNMODE=normal UDI=/org/freedesktop/Hal/devices/storage_model_DVD_RAM_GSA_H60L DEVICE=scd0 TESTSERVER=unknown run
>chmod a+x ./runtest.sh ./cdrom.py
>./runtest.sh
>/tmp/hts-cdrom-YiBKSq/mnt/tests/HTS/hts/cdrom/cdrom.py
>Running ./cdrom.py:
>process 14380: Applications must not close shared connections - see dbus_connection_close() docs. This is a bug in the application.
>  block.device = '/dev/scd0'  (string)
>Driver flags   : MMC-3 SWABAUDIO BURNFREE 
>
>
>  Your CD/DVD device /dev/scd0 supports ['cd-rw', 'dvd-rw', 'dvd+rw', 'burnfree'] 
>  We will check these features. 
>  You need to prepare following media(disks) for this test: 
>
>    --- one good CD-RW disk 
>    --- one good DVD-RW or DVD+RW disk 
>
>  Press ENTER when you are ready ! Or press Ctrl-C to quit !
>
>
>
>
>
>
>
>
>
>
>
>
>
>  Please insert a good CD-RW disk into scd0 and then press ENTER to continue !
>
>  +++ Start testing CD-RW ... 
>
>
>  Blanking the disk, this may take some time, please be patient ...
>
>scsidev: '/dev/scd0'
>devname: '/dev/scd0'
>scsibus: -2 target: -2 lun: -2
>Linux sg driver version: 3.5.27
>cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c       1.83 04/05/20 Copyright 1997 J. Schilling').
>SCSI buffer size: 64512
>Cdrecord-Clone 2.01 (cpu-pc-linux-gnu) Copyright (C) 1995-2004 Jï¿½rg Schilling
>Note: This version is an unofficial (modified) version with DVD support
>Note: and therefore may have bugs that are not present in the original.
>Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla
>Note: The author of cdrecord should not be bothered with problems in this version.
>TOC Type: 1 = CD-ROM
>Using libscg version 'schily-0.8'.
>atapi: 1
>Device type    : Removable CD-ROM
>Version        : 5
>Response Format: 2
>Capabilities   : 
>Vendor_info    : 'HL-DT-ST'
>Identifikation : 'DVD-RAM GSA-H60L'
>Revision       : 'E903'
>Device seems to be: Generic mmc2 DVD-R/DVD-RW.
>Current: 0x000A
>Profile: 0x0012 
>Profile: 0x0011 
>Profile: 0x0015 
>Profile: 0x0016 
>Profile: 0x0014 
>Profile: 0x0013 
>Profile: 0x001A 
>Profile: 0x001B 
>Profile: 0x002B 
>Profile: 0x0010 
>Profile: 0x0009 
>Profile: 0x000A (current)
>Profile: 0x0008 
>Profile: 0x0002 
>Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
>Driver flags   : MMC-3 SWABAUDIO BURNFREE 
>Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
>Drive buf size : 1053696 = 1029 KB
>Drive DMA Speed: 16712 kB/s 94x CD 12x DVD
>Current Secsize: 2048
>ATIP info from disk:
>  Indicated writing power: 5
>  Reference speed: 2
>  Is not unrestricted
>  Is erasable
>  ATIP start of lead in:  -12900 (97:10/00)
>  ATIP start of lead out: 359849 (79:59/74)
>  1T speed low:  0 (reserved val  0) 1T speed high:  4
>  2T speed low:  0 (reserved val  5) 2T speed high:  0 (reserved val 12)
>  power mult factor: 4 5
>  recommended erase/write power: 3
>  A1 values: 02 4A B0
>  A2 values: 5C C6 26
>Disk type:    unknown dye (reserved id code)
>Manuf. index: -1
>Manufacturer: unknown (not in table)
>Manufacturer is unknown because of the orange forum embargo.
>As the orange forum likes to get money for recent information,
>it may be that this media does not use illegal manufacturer coding.
>Starting to write CD/DVD at speed 4 in real BLANK mode for single session.
>Last chance to quit, starting real write    0 seconds. Operation starts.
>Performing OPC...
>Blanking PMA, TOC, pregap
>Blanking time:   52.086s
>
>  +++ Blank disk done !
>
>
>  +++ Start writing ...
>
>Driver flags   : MMC-3 SWABAUDIO BURNFREE 
>
>  +++ Write options : -tao driveropts=burnfree 
>
>scsidev: '/dev/scd0'
>devname: '/dev/scd0'
>scsibus: -2 target: -2 lun: -2
>Linux sg driver version: 3.5.27
>cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c        1.83 04/05/20 Copyright 1997 J. Schilling').
>SCSI buffer size: 64512
>Cdrecord-Clone 2.01 (cpu-pc-linux-gnu) Copyright (C) 1995-2004 Jï¿½rg Schilling
>Note: This version is an unofficial (modified) version with DVD support
>Note: and therefore may have bugs that are not present in the original.
>Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla
>Note: The author of cdrecord should not be bothered with problems in this version.
>TOC Type: 1 = CD-ROM
>Using libscg version 'schily-0.8'.
>Driveropts: 'burnfree'
>atapi: 1
>Device type    : Removable CD-ROM
>Version        : 5
>Response Format: 2
>Capabilities   : 
>Vendor_info    : 'HL-DT-ST'
>Identifikation : 'DVD-RAM GSA-H60L'
>Revision       : 'E903'
>Device seems to be: Generic mmc2 DVD-R/DVD-RW.
>Current: 0x000A
>Profile: 0x0012 
>Profile: 0x0011 
>Profile: 0x0015 
>Profile: 0x0016 
>Profile: 0x0014 
>Profile: 0x0013 
>Profile: 0x001A 
>Profile: 0x001B 
>Profile: 0x002B 
>Profile: 0x0010 
>Profile: 0x0009 
>Profile: 0x000A (current)
>Profile: 0x0008 
>Profile: 0x0002 
>Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
>Driver flags   : MMC-3 SWABAUDIO BURNFREE 
>Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
>Drive buf size : 1053696 = 1029 KB
>Drive DMA Speed: 16499 kB/s 93x CD 11x DVD
>FIFO size      : 33554432 = 32768 KB
>Track 01: data   175 MB        
>Total size:      201 MB (19:57.32) = 89799 sectors
>Lout start:      201 MB (19:59/24) = 89799 sectors
>Current Secsize: 2048
>ATIP info from disk:
>  Indicated writing power: 5
>  Reference speed: 2
>  Is not unrestricted
>  Is erasable
>  ATIP start of lead in:  -12900 (97:10/00)
>  ATIP start of lead out: 359849 (79:59/74)
>  1T speed low:  0 (reserved val  0) 1T speed high:  4
>  2T speed low:  0 (reserved val  5) 2T speed high:  0 (reserved val 12)
>  power mult factor: 4 5
>  recommended erase/write power: 3
>  A1 values: 02 4A B0
>  A2 values: 5C C6 26
>Disk type:    unknown dye (reserved id code)
>Manuf. index: -1
>Manufacturer: unknown (not in table)
>Manufacturer is unknown because of the orange forum embargo.
>As the orange forum likes to get money for recent information,
>it may be that this media does not use illegal manufacturer coding.
>Blocks total: 359849 Blocks current: 359849 Blocks remaining: 270050
>Starting to write CD/DVD at speed 4 in real TAO mode for single session.
>Last chance to quit, starting real write    0 seconds. Operation starts.
>Waiting for reader process to fill input buffer ... input buffer ready.
>trackno=0
>BURN-Free is ON.
>Performing OPC...
>Starting new track at sector: 0
>Track 01:  175 of  175 MB written (fifo 100%) [buf  99%]   4.1x.
>Track 01: Total bytes read/written: 183904256/183904256 (89797 sectors).
>Writing  time:  302.837s
>Average write speed   4.0x.
>Min drive buffer fill was 99%
>Fixating...
>Fixating time:   68.225s
>cdrecord: fifo had 2897 puts and 2897 gets.
>cdrecord: fifo was 0 times empty and 2366 times full, min fill was 97%.
>
>  +++ Write disk succeeded ! 
>
>  Start to compare data, this may take some time, please be patient ... 
>Traceback (most recent call last):
>  File "./cdrom.py", line 708, in ?
>    returnValue = test.do(sys.argv)
>  File "/usr/share/hts/lib/hts/test.py", line 226, in do
>    return self.run()
>  File "./cdrom.py", line 618, in run
>    returnValue = self.testCDRW(cdromDevice)
>  File "./cdrom.py", line 487, in testCDRW
>    returnValue = self.rewriter("cdrom",cdromDevice)
>  File "./cdrom.py", line 423, in rewriter
>    returnValue = self.writer(deviceType,cdromDevice)
>  File "./cdrom.py", line 393, in writer
>    if self.cmpTree(fileDir,"media"):
>  File "./cdrom.py", line 80, in cmpTree
>    if filecmp.cmp(file1,file2):
>  File "/usr/lib/python2.4/filecmp.py", line 49, in cmp
>    s2 = _sig(os.stat(f2))
>OSError: [Errno 2] No such file or directory: 'media/runcon'
>...finished running ./cdrom.py, exit code=1
>recovered exit code=1
>hts-report-result /HTS/hts/cdrom FAIL /var/log/hts/runs/1/cdrom/output.log 
>saveOutput: /var/log/hts/runs/1/cdrom/output.log
>Return value was 0
>running info on /org/freedesktop/Hal/devices/computer
>mkdir -p /tmp/hts-info-ZTP21F/mnt/tests/HTS/hts/info
>cp -a testinfo.desc runtest.sh info.py Makefile /tmp/hts-info-ZTP21F/mnt/tests/HTS/hts/info
>install -m 0755 runtest.sh /tmp/hts-info-ZTP21F/mnt/tests/HTS/hts/info
>make OUTPUTFILE=/var/log/hts/runs/1/info/output.log RUNMODE=normal UDI=/org/freedesktop/Hal/devices/computer DEVICE= TESTSERVER=unknown run
>chmod a+x ./runtest.sh ./info.py
>./runtest.sh
>/tmp/hts-info-ZTP21F/mnt/tests/HTS/hts/info/info.py
>Running ./info.py:
>OS Version RHEL5, kernel rpm kernel-2.6.18-52.el5
>+ rpm -ql kernel-2.6.18-52.el5
>Checking Kernel: PASS
>Checking Modules: PASS
>
>This utility will go through and collect some detailed information
>about the hardware and setup of your Red Hat Linux system.
>This information will be used to diagnose problems with your system
>and will be considered confidential information.  Red Hat will use
>this information for diagnostic purposes ONLY.
>
>Please wait while we collect information about your system.
>
>This process may take a while to complete....
>No changes will be made to your system during this process.
>
>NOTE: You can safely ignore a failed message. This only means a file
>we were checking for did not exist.
>
>If your system hangs while gathering rpm information, please abort
>the script with CTRL-C and run it again after adding -norpm to the
>sysreport command line
>
>Press ENTER to continue, or CTRL-C to quit.
>
>Getting system configuration information.

Actions: View

Attachments on bug 251371: 160919 | 227901 | 238081 | 239451 | 239461 | 239471 | 239481 | 239491 | 239501 | 246081