Attachment 239471 Details for Bug 251371 – console output during failing DVDRW

console output during failing DVDRW

console-testfail-notblankDVDRW.txt (text/plain), 7.33 KB, created by Gregory Feiner on 2007-10-26 19:40:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gregory Feiner

Created: 2007-10-26 19:40:59 UTC

Size: 7.33 KB

patch

obsolete

>Your DVD drive /dev/scd0 supports both dvd-rw and dvd+rw . 
>  To save the testing time, only one of them is required to be tested . 
>  ( Of course you can choose to test both of them :-) )
>
>
>    Press '1' if you have dvd-rw media and want to test dvd-rw ; Or 
>    Press '2' if you have dvd+rw media and want to test dvd+rw ; Or 
>    Press '3' if you want to test both dvd-rw and dvd+rw  
>
>
>  Followed by the Enter key . 
>
>
>  Your choice : 1
>response: 1
>
>
>
>
>
>
>
>
>  Please insert a good DVD-RW disk into scd0 and then press ENTER to continue !
>
>  +++ Start testing DVD-RW ... 
>
>
>  Blanking the disk, this may take some time, please be patient ...
>
>scsidev: '/dev/scd0'
>devname: '/dev/scd0'
>scsibus: -2 target: -2 lun: -2
>Linux sg driver version: 3.5.27
>cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c        1.83 04/05/20 Copyright 1997 J. Schilling').
>SCSI buffer size: 64512
>cdrecord: Found DVD media: using cdr_mdvd.
>Cdrecord-Clone 2.01 (cpu-pc-linux-gnu) Copyright (C) 1995-2004 Jï¿½rg Schilling
>Note: This version is an unofficial (modified) version with DVD support
>Note: and therefore may have bugs that are not present in the original.
>Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla
>Note: The author of cdrecord should not be bothered with problems in this version.
>TOC Type: 1 = CD-ROM
>Using libscg version 'schily-0.8'.
>atapi: 1
>Device type    : Removable CD-ROM
>Version        : 5
>Response Format: 2
>Capabilities   : 
>Vendor_info    : 'HL-DT-ST'
>Identifikation : 'DVD-RAM GSA-H60L'
>Revision       : 'E903'
>Device seems to be: Generic mmc2 DVD-R/DVD-RW.
>Current: 0x0014
>Profile: 0x0012 
>Profile: 0x0011 
>Profile: 0x0015 
>Profile: 0x0016 
>Profile: 0x0014 (current)
>Profile: 0x0013 (current)
>Profile: 0x001A 
>Profile: 0x001B 
>Profile: 0x002B 
>Profile: 0x0010 (current)
>Profile: 0x0009 
>Profile: 0x000A 
>Profile: 0x0008 
>Profile: 0x0002 
>Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
>Driver flags   : SWABAUDIO BURNFREE 
>Supported modes: PACKET SAO
>Drive buf size : 1114112 = 1088 KB
>Drive DMA Speed: 16541 kB/s 93x CD 11x DVD
>Current Secsize: 2048
>  ATIP start of lead in:  -150 (00:00/00)
>Disk type:    unknown dye (reserved id code)
>Manuf. index: -1
>Manufacturer: unknown (not in table)
>scsi_set_streaming
>Starting to write CD/DVD at speed 2 in real BLANK mode for single session.
>Last chance to quit, starting real write    0 seconds. Operation starts.
>Performing OPC...
>Blanking PMA, TOC, pregap
>Blanking time:   21.165s
>
>  +++ Blank disk done !
>
>
>  +++ Start writing ...
>
>Driver flags   : SWABAUDIO BURNFREE 
>
>+++ Write options : -sao driveropts=burnfree 
>
>scsidev: '/dev/scd0'
>devname: '/dev/scd0'
>scsibus: -2 target: -2 lun: -2
>Linux sg driver version: 3.5.27
>cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c        1.83 04/05/20 Copyright 1997 J. Schilling').
>SCSI buffer size: 64512
>cdrecord: Found DVD media: using cdr_mdvd.
>Cdrecord-Clone 2.01 (cpu-pc-linux-gnu) Copyright (C) 1995-2004 Jï¿½rg Schilling
>Note: This version is an unofficial (modified) version with DVD support
>Note: and therefore may have bugs that are not present in the original.
>Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla
>Note: The author of cdrecord should not be bothered with problems in this version.
>TOC Type: 1 = CD-ROM
>Using libscg version 'schily-0.8'.
>Driveropts: 'burnfree'
>atapi: 1
>Device type    : Removable CD-ROM
>Version        : 5
>Response Format: 2
>Capabilities   : 
>Vendor_info    : 'HL-DT-ST'
>Identifikation : 'DVD-RAM GSA-H60L'
>Revision       : 'E903'
>Device seems to be: Generic mmc2 DVD-R/DVD-RW.
>Current: 0x0014
>Profile: 0x0012 
>Profile: 0x0011 
>Profile: 0x0015 
>Profile: 0x0016 
>Profile: 0x0014 (current)
>Profile: 0x0013 (current)
>Profile: 0x001A 
>Profile: 0x001B 
>Profile: 0x002B 
>Profile: 0x0010 
>Profile: 0x0009 
>Profile: 0x000A 
>Profile: 0x0008 
>Profile: 0x0002 
>Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
>Driver flags   : SWABAUDIO BURNFREE 
>Supported modes: PACKET SAO
>Drive buf size : 1114112 = 1088 KB
>Drive DMA Speed: 18537 kB/s 105x CD 13x DVD
>FIFO size      : 33554432 = 32768 KB
>Track 01: data  1036 MB        
>Total size:     1190 MB (117:54.60) = 530595 sectors
>Lout start:     1190 MB (117:56/45) = 530595 sectors
>Current Secsize: 2048
>  ATIP start of lead in:  -150 (00:00/00)
>Disk type:    unknown dye (reserved id code)
>Manuf. index: -1
>Manufacturer: unknown (not in table)
>Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1767901
>scsi_set_streaming
>Starting to write CD/DVD at speed 2 in real SAO mode for single session.
>Last chance to quit, starting real write    0 seconds. Operation starts.
>Waiting for reader process to fill input buffer ... cdrecord: Turning BURN-Free on
>input buffer ready.
>trackno=0
>BURN-Free is ON.
>Turning BURN-Free off
>BURN-Free is OFF.
>Performing OPC...
>Sending CUE sheet...
>cdrecord: WARNING: Drive returns wrong startsec (0) using -150
>Starting new track at sector: 0
>Track 01: 1036 of 1036 MB written (fifo 100%) [buf  98%]  19.0x.
>Track 01: Total bytes read/written: 1086658560/1086658560 (530595 sectors).
>Writing  time:  402.839s
>Average write speed  17.6x.
>Min drive buffer fill was 97%
>Fixating...
>Fixating time:   43.648s
>cdrecord: fifo had 17116 puts and 17116 gets.
>cdrecord: fifo was 0 times empty and 14376 times full, min fill was 86%.
>
>  +++ Write disk succeeded ! 
>
>  Start to compare data, this may take some time, please be patient ... 
>Traceback (most recent call last):
>  File "./cdrom.py", line 708, in ?
>    returnValue = test.do(sys.argv)
>  File "/usr/share/hts/lib/hts/test.py", line 226, in do
>    return self.run()
>  File "./cdrom.py", line 657, in run
>    returnValue = self.testDVDRW(cdromDevice)
>  File "./cdrom.py", line 526, in testDVDRW
>    returnValue = self.rewriter("dvd",cdromDevice)
>  File "./cdrom.py", line 423, in rewriter
>    returnValue = self.writer(deviceType,cdromDevice)
>  File "./cdrom.py", line 393, in writer
>    if self.cmpTree(fileDir,"media"):
>  File "./cdrom.py", line 80, in cmpTree
>    if filecmp.cmp(file1,file2):
>  File "/usr/lib/python2.4/filecmp.py", line 49, in cmp
>    s2 = _sig(os.stat(f2))
>OSError: [Errno 13] Permission denied: 'media/man/sl/man5/man.config.5.gz'
>...finished running ./cdrom.py, exit code=1
>recovered exit code=1
>hts-report-result /HTS/hts/cdrom FAIL /var/log/hts/runs/1/cdrom/output.log 
>saveOutput: /var/log/hts/runs/1/cdrom/output.log
>Return value was 0
>skipping storage - disabled
>running info on /org/freedesktop/Hal/devices/computer
>mkdir -p /tmp/hts-info-feTLkc/mnt/tests/HTS/hts/info
>cp -a testinfo.desc runtest.sh info.py Makefile /tmp/hts-info-feTLkc/mnt/tests/HTS/hts/info
>install -m 0755 runtest.sh /tmp/hts-info-feTLkc/mnt/tests/HTS/hts/info
>make OUTPUTFILE=/var/log/hts/runs/1/info/output.log RUNMODE=normal UDI=/org/freedesktop/Hal/devices/computer DEVICE= TESTSERVER=unknown run
>chmod a+x ./runtest.sh ./info.py
>./runtest.sh
>/tmp/hts-info-feTLkc/mnt/tests/HTS/hts/info/info.py
>Running ./info.py:
>OS Version RHEL5, kernel rpm kernel-2.6.18-52.el5
>+ rpm -ql kernel-2.6.18-52.el5
>Checking Kernel: PASS
>Checking Modules: PASS
>
>This utility will go through and coll
>

Actions: View

Attachments on bug 251371: 160919 | 227901 | 238081 | 239451 | 239461 | 239471 | 239481 | 239491 | 239501 | 246081