Attachment 241021 Details for Bug 356051 – dmesg

dmesg

dmesg (text/plain), 26.43 KB, created by shrek-m on 2007-10-28 21:47:12 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: shrek-m

Created: 2007-10-28 21:47:12 UTC

Size: 26.43 KB

patch

obsolete

>Linux version 2.6.22.9-91.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Thu Sep 27 20:47:39 EDT 2007
>Command line: ro root=LABEL=/ rhgb quiet pci=nommconf
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007bfd0000 (usable)
> BIOS-e820: 000000007bfd0000 - 000000007bfde000 (ACPI data)
> BIOS-e820: 000000007bfde000 - 000000007c000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 507856) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000F9470, 0014 (r0 ACPIAM)
>ACPI: RSDT 7BFD0000, 0034 (r1 A M I  OEMRSDT  11000518 MSFT       97)
>ACPI: FACP 7BFD0200, 0084 (r2 A M I  OEMFACP  11000518 MSFT       97)
>ACPI: DSDT 7BFD0440, 49EE (r1  1ADBE 1ADBE007        7 INTL  2002026)
>ACPI: FACS 7BFDE000, 0040
>ACPI: APIC 7BFD0390, 0070 (r1 A M I  OEMAPIC  11000518 MSFT       97)
>ACPI: MCFG 7BFD0400, 003C (r1 A M I  OEMMCFG  11000518 MSFT       97)
>ACPI: OEMB 7BFDE040, 0056 (r1 A M I  AMI_OEM  11000518 MSFT       97)
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007bfd0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 507856) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007bfd0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   507856
>On node 0 totalpages: 507759
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1300 pages reserved
>  DMA zone: 2643 pages, LIFO batch:0
>  DMA32 zone: 6887 pages used for memmap
>  DMA32 zone: 496873 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 7c000000:82c00000)
>SMP: Allowing 2 CPUs, 1 hotplug CPUs
>PERCPU: Allocating 40968 bytes of per cpu data
>Built 1 zonelists.  Total pages: 499516
>Kernel command line: ro root=LABEL=/ rhgb quiet pci=nommconf
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 2009.158 MHz processor.
>Console: colour VGA+ 80x25
>Checking aperture...
>CPU 0: aperture @ 2000000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 1993768k/2031424k available (2362k kernel code, 37268k reserved, 1400k data, 312k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 4020.40 BogoMIPS (lpj=2010203)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 12557253
>Detected 12.557 MHz APIC timer.
>Brought up 1 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2048 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:10.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *5
>ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 16 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:08: iomem range 0xfefe0000-0xfefe01ff has been reserved
>pnp: 00:09: iomem range 0xfe280000-0xfe2bffff has been reserved
>pnp: 00:09: iomem range 0xfee01000-0xfeefffff has been reserved
>pnp: 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
>pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
>pnp: 00:0d: ioport range 0xa00-0xa0f has been reserved
>pnp: 00:0d: ioport range 0xa10-0xa1f has been reserved
>pnp: 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
>pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0f: iomem range 0xc0000-0xcffff has been reserved
>pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bus 5, cardbus bridge: 0000:04:07.0
>  IO window: 0000d000-0000d0ff
>  IO window: 0000d400-0000d4ff
>  PREFETCH window: 80000000-83ffffff
>  MEM window: 84000000-87ffffff
>PCI: Bridge: 0000:00:10.0
>  IO window: d000-efff
>  MEM window: fe300000-febfffff
>  PREFETCH window: fa000000-fbffffff
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:04:07.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 19
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3115k freed
>audit: initializing netlink socket (disabled)
>audit(1193601891.367:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key F49647332066F9
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:05.0
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:04:07.0 [0000:0000]
>Yenta: ISA IRQ mask 0x0000, PCI irq 19
>Socket status: 30000820
>Yenta: Raising subordinate bus# of parent bus (#04) from #05 to #08
>pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
>pcmcia: parent PCI bridge Memory window: 0xfe300000 - 0xfebfffff
>pcmcia: parent PCI bridge Memory window: 0xfa000000 - 0xfbffffff
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00)
>powernow-k8: BIOS error - no PSB or ACPI _PSS objects
>Freeing unused kernel memory: 312k freed
>Write protecting the kernel read-only data: 1060k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfe2de000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>input: PS/2 Logitech Mouse as /class/input/input2
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:0b.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:0b.1
>ehci_hcd 0000:00:0b.1: irq 22, io mem 0xfe2dfc00
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>pata_amd 0000:00:0d.0: version 0.3.8
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>scsi0 : pata_amd
>scsi1 : pata_amd
>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14
>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15
>pccard: CardBus card inserted into slot 0
>ata1.00: ATA-6: IC35L060AVV207-0, V22OA66A, max UDMA/100
>ata1.00: 78125000 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      IC35L060AVV207-0 V22O PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 78125000 512-byte hardware sectors (40000 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 78125000 512-byte hardware sectors (40000 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
>ata1.00: (BMDMA stat 0x24)
>ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
>         res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
>ata1: soft resetting port
>usb 2-1: new high speed USB device using ehci_hcd and address 2
>ata1.00: configured for UDMA/100
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
>ata1.00: (BMDMA stat 0x24)
>ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
>         res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
>ata1: soft resetting port
>usb 2-1: configuration #1 chosen from 1 choice
>ata1.00: configured for UDMA/100
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
>ata1.00: (BMDMA stat 0x24)
>ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
>         res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
>ata1: soft resetting port
>ata1.00: configured for UDMA/100
>ata1: EH complete
>ata1.00: limiting speed to UDMA/66:PIO4
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
>ata1.00: (BMDMA stat 0x24)
>ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
>         res 51/84:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
>ata1: soft resetting port
>usb 2-3: new high speed USB device using ehci_hcd and address 4
>ata1.00: configured for UDMA/66
>ata1: EH complete
> sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb 2-3: configuration #1 chosen from 1 choice
>usb 1-2: new low speed USB device using ohci_hcd and address 2
>usb 1-2: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /class/input/input3
>input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:0b.0-2
>usb 1-4: new low speed USB device using ohci_hcd and address 3
>usb 1-4: configuration #1 chosen from 1 choice
>hiddev96: USB HID v1.10 Device [American Power Conversion Smart-UPS 1000 FW:600.3.I USB FW:1.5] on usb-0000:00:0b.0-4
>sata_nv 0000:00:0e.0: version 3.4
>ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x000000000001c800 ctl 0x000000000001c482 bmdma 0x000000000001c000 irq 21
>ata4: SATA max UDMA/133 cmd 0x000000000001c400 ctl 0x000000000001c082 bmdma 0x000000000001c008 irq 21
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-7: SAMSUNG HD160JJ, ZM100-33, max UDMA7
>ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: ATA-7: SAMSUNG HD160JJ, ZM100-33, max UDMA7
>ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata4.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD160JJ  ZM10 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3
>sd 2:0:0:0: [sdb] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD160JJ  ZM10 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2 sdc3
>sd 3:0:0:0: [sdc] Attached SCSI disk
>ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LSA1] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>scsi4 : sata_nv
>scsi5 : sata_nv
>ata5: SATA max UDMA/133 cmd 0x000000000001bc00 ctl 0x000000000001b882 bmdma 0x000000000001b400 irq 20
>ata6: SATA max UDMA/133 cmd 0x000000000001b800 ctl 0x000000000001b482 bmdma 0x000000000001b408 irq 20
>ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5.00: ATA-7: SAMSUNG HD160JJ, ZM100-33, max UDMA7
>ata5.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata5.00: configured for UDMA/133
>ata6: SATA link down (SStatus 0 SControl 300)
>scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG HD160JJ  ZM10 PQ: 0 ANSI: 5
>sd 4:0:0:0: [sdd] 312581808 512-byte hardware sectors (160042 MB)
>sd 4:0:0:0: [sdd] Write Protect is off
>sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sdd] 312581808 512-byte hardware sectors (160042 MB)
>sd 4:0:0:0: [sdd] Write Protect is off
>sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1 sdd2 sdd3
>sd 4:0:0:0: [sdd] Attached SCSI disk
>Initializing USB Mass Storage driver...
>scsi6 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>scsi7 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>usb-storage: device scan complete
>scsi 7:0:0:0: CD-ROM            LITE-ON  DVDRW SOHW-1633S BS0H PQ: 0 ANSI: 0
>scsi 6:0:0:0: CD-ROM            Iomega   RRD2             P084 PQ: 0 ANSI: 0
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
>ata1.00: (BMDMA stat 0x24)
>ata1.00: cmd c8/00:20:9f:f2:c0/00:00:00:00:00/e3 tag 0 cdb 0x0 data 16384 in
>         res 51/84:00:be:f2:c0/00:00:00:00:00/e3 Emask 0x10 (ATA bus error)
>ata1: soft resetting port
>ata1.00: configured for UDMA/66
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
>ata1.00: (BMDMA stat 0x24)
>ata1.00: cmd c8/00:20:9f:f2:c0/00:00:00:00:00/e3 tag 0 cdb 0x0 data 16384 in
>         res 51/84:00:be:f2:c0/00:00:00:00:00/e3 Emask 0x10 (ATA bus error)
>ata1: soft resetting port
>ata1.00: configured for UDMA/66
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
>ata1.00: (BMDMA stat 0x24)
>ata1.00: cmd c8/00:20:9f:f2:c0/00:00:00:00:00/e3 tag 0 cdb 0x0 data 16384 in
>         res 51/84:00:be:f2:c0/00:00:00:00:00/e3 Emask 0x10 (ATA bus error)
>ata1: soft resetting port
>ata1.00: configured for UDMA/66
>ata1: EH complete
>ata1.00: limiting speed to UDMA/33:PIO4
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
>ata1.00: (BMDMA stat 0x24)
>ata1.00: cmd c8/00:20:9f:f2:c0/00:00:00:00:00/e3 tag 0 cdb 0x0 data 16384 in
>         res 51/84:00:be:f2:c0/00:00:00:00:00/e3 Emask 0x10 (ATA bus error)
>ata1: soft resetting port
>ata1.00: configured for UDMA/33
>ata1: EH complete
>sd 0:0:0:0: [sda] 78125000 512-byte hardware sectors (40000 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 78125000 512-byte hardware sectors (40000 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>security:  3 users, 6 roles, 1855 types, 86 bools, 1 sens, 1024 cats
>security:  61 classes, 70892 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1193601910.466:2): policy loaded auid=4294967295
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>sd 3:0:0:0: Attached scsi generic sg2 type 0
>sd 4:0:0:0: Attached scsi generic sg3 type 0
>scsi 6:0:0:0: Attached scsi generic sg4 type 5
>scsi 7:0:0:0: Attached scsi generic sg5 type 5
>sr0: scsi3-mmc drive: 125x/125x caddy
>Uniform CD-ROM driver Revision: 3.20
>sr 6:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>sr 7:0:0:0: Attached scsi CD-ROM sr1
> : Error requesting region 5000 .. 503F for SMB1
>nForce2_smbus 0000:00:0a.1: Error probing SMB1.
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x6000
>Loaded prism54 driver, version 1.2
>PCI: Enabling device 0000:05:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 19
>prism54: pci_set_mwi(pdev) succeeded
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:14.0 to 64
>forcedeth: using HIGHDMA
>parport_pc 00:07: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>eth1: forcedeth.c: subsystem: 01462:7207 bound to 0000:00:14.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [LNKD] -> GSI 18 (level, low) -> IRQ 18
>firewire_ohci: Added fw-ohci device 0000:04:08.0, OHCI version 1.10
>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:10.1 to 64
>hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
>audit(1193598318.663:3): avc:  denied  { read } for  pid=1297 comm="salsa" name="asound.state" dev=sda2 ino=2356054 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:alsa_etc_rw_t:s0 tclass=file
>audit(1193598318.663:4): avc:  denied  { getattr } for  pid=1297 comm="salsa" name="asound.state" dev=sda2 ino=2356054 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:alsa_etc_rw_t:s0 tclass=file
>firewire_core: created new fw device fw0 (0 config rom retries)
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 17
>ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNEC] -> GSI 17 (level, low) -> IRQ 17
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2200896k swap on /dev/sda3.  Priority:-1 extents:1 across:2200896k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

Actions: View

Attachments on bug 356051: 241001 | 241021