Attachment 246361 Details for Bug 351451 – Patch to fix ATAPI issues with memory >4GB

[patch] Patch to fix ATAPI issues with memory >4GB

sata_nv-fix-atapi-issues-over-4gb.patch (text/plain), 5.43 KB, created by Robert Hancock on 2007-11-02 04:18:36 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Robert Hancock

Created: 2007-11-02 04:18:36 UTC

Size: 5.43 KB

patch

obsolete

>This fixes some problems with ATAPI devices on nForce4 controllers in ADMA mode
>on systems with memory located above 4GB. We need to make sure that the legacy
>PRD table and padding buffer are appropriately allocated according to the
>DMA mask requirements of the current operating mode (ADMA or legacy).
>
>Also, we should run any DMA command with result taskfile requested in ADMA mode
>when the port is in ADMA mode, otherwise it may try to use the legacy DMA engine
>in ADMA mode which is not allowed.
>
>Signed-off-by: Robert Hancock <hancockr@shaw.ca>
>
>--- linux-2.6.24-rc1-git10/drivers/ata/sata_nv.c	2007-11-01 20:01:32.000000000 -0600
>+++ linux-2.6.24-rc1-git10edit/drivers/ata/sata_nv.c	2007-11-01 21:41:55.000000000 -0600
>@@ -247,6 +247,7 @@
> 	void __iomem		*ctl_block;
> 	void __iomem		*gen_block;
> 	void __iomem		*notifier_clear_block;
>+	u64			adma_dma_mask;
> 	u8			flags;
> 	int			last_issue_ncq;
> };
>@@ -747,11 +748,29 @@
> 		   on the port. */
> 		adma_enable = 0;
> 		nv_adma_register_mode(ap);
>+		if (!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)) {
>+			/* Transitioning to legacy mode. Free the pad buffer. */
>+			ata_pad_free(ap, ap->host->dev);
>+			ap->pad = NULL;
>+			ap->pad_dma = 0;
>+		}
> 	} else {
>-		bounce_limit = *ap->dev->dma_mask;
>+		bounce_limit = pp->adma_dma_mask;
> 		segment_boundary = NV_ADMA_DMA_BOUNDARY;
> 		sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN;
> 		adma_enable = 1;
>+
>+		if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
>+			/* Transitioning to ADMA mode. Free legacy PRD table
>+			   and the pad buffer. */
>+			ata_pad_free(ap, ap->host->dev);
>+			ap->pad = NULL;
>+			ap->pad_dma = 0;
>+			dmam_free_coherent(ap->host->dev, ATA_PRD_TBL_SZ,
>+				ap->prd, ap->prd_dma);
>+			ap->prd = NULL;
>+			ap->prd_dma = 0;
>+		}
> 	}
> 
> 	pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &current_reg);
>@@ -763,23 +782,39 @@
> 		config_mask = NV_MCP_SATA_CFG_20_PORT0_EN |
> 			      NV_MCP_SATA_CFG_20_PORT0_PWB_EN;
> 
>+	/* Set appropriate DMA mask. */
>+	pci_set_dma_mask(pdev, bounce_limit);
>+	pci_set_consistent_dma_mask(pdev, bounce_limit);
>+
>+	blk_queue_bounce_limit(sdev->request_queue, bounce_limit);
>+	blk_queue_segment_boundary(sdev->request_queue, segment_boundary);
>+	blk_queue_max_hw_segments(sdev->request_queue, sg_tablesize);
>+	ata_port_printk(ap, KERN_INFO,
>+		"bounce limit 0x%llX, segment boundary 0x%lX, hw segs %hu\n",
>+		(unsigned long long)bounce_limit, segment_boundary,
>+		sg_tablesize);
>+
> 	if (adma_enable) {
> 		new_reg = current_reg | config_mask;
>-		pp->flags &= ~NV_ADMA_ATAPI_SETUP_COMPLETE;
>+		if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
>+			/* Transition to ADMA mode.
>+			   Reallocate the pad buffer. */
>+			ata_pad_alloc(ap, ap->host->dev);
>+			pp->flags &= ~NV_ADMA_ATAPI_SETUP_COMPLETE;
>+		}
> 	} else {
> 		new_reg = current_reg & ~config_mask;
>-		pp->flags |= NV_ADMA_ATAPI_SETUP_COMPLETE;
>+		if (!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)) {
>+			/* Transition to legacy mode.
>+			   Reallocate the pad buffer. */
>+			ata_pad_alloc(ap, ap->host->dev);
>+			pp->flags |= NV_ADMA_ATAPI_SETUP_COMPLETE;
>+		}
> 	}
> 
> 	if (current_reg != new_reg)
> 		pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, new_reg);
> 
>-	blk_queue_bounce_limit(sdev->request_queue, bounce_limit);
>-	blk_queue_segment_boundary(sdev->request_queue, segment_boundary);
>-	blk_queue_max_hw_segments(sdev->request_queue, sg_tablesize);
>-	ata_port_printk(ap, KERN_INFO,
>-		"bounce limit 0x%llX, segment boundary 0x%lX, hw segs %hu\n",
>-		(unsigned long long)bounce_limit, segment_boundary, sg_tablesize);
> 	return rc;
> }
> 
>@@ -791,11 +826,13 @@
> 
> static void nv_adma_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
> {
>-	/* Since commands where a result TF is requested are not
>-	   executed in ADMA mode, the only time this function will be called
>-	   in ADMA mode will be if a command fails. In this case we
>-	   don't care about going into register mode with ADMA commands
>-	   pending, as the commands will all shortly be aborted anyway. */
>+	/* Other than when internal or pass-through commands are executed,
>+	   the only time this function will be called in ADMA mode will be
>+	   if a command fails. In the failure case we don't care about going
>+	   into register mode with ADMA commands pending, as the commands will
>+	   all shortly be aborted anyway. We assume that NCQ commands are not
>+	   issued via passthrough and so this will not abort any commands in
>+	   that case. */
> 	nv_adma_register_mode(ap);
> 
> 	ata_tf_read(ap, tf);
>@@ -1136,7 +1173,9 @@
> 
> 	VPRINTK("ENTER\n");
> 
>-	rc = ata_port_start(ap);
>+	/* Do not allocate standard ATA PRD buffer here. Only do this if
>+	   an ATAPI device is connected (in slave_config). */
>+	rc = ata_pad_alloc(ap, dev);
> 	if (rc)
> 		return rc;
> 
>@@ -1150,6 +1189,7 @@
> 	pp->gen_block = ap->host->iomap[NV_MMIO_BAR] + NV_ADMA_GEN;
> 	pp->notifier_clear_block = pp->gen_block +
> 	       NV_ADMA_NOTIFIER_CLEAR + (4 * ap->port_no);
>+	pp->adma_dma_mask = *dev->dma_mask & dev->coherent_dma_mask;
> 
> 	mem = dmam_alloc_coherent(dev, NV_ADMA_PORT_PRIV_DMA_SZ,
> 				  &mem_dma, GFP_KERNEL);
>@@ -1359,11 +1399,9 @@
> 	struct nv_adma_port_priv *pp = qc->ap->private_data;
> 
> 	/* ADMA engine can only be used for non-ATAPI DMA commands,
>-	   or interrupt-driven no-data commands, where a result taskfile
>-	   is not required. */
>+	   or interrupt-driven no-data commands. */
> 	if ((pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) ||
>-	   (qc->tf.flags & ATA_TFLAG_POLLING) ||
>-	   (qc->flags & ATA_QCFLAG_RESULT_TF))
>+	   (qc->tf.flags & ATA_TFLAG_POLLING))
> 		return 1;
> 
> 	if ((qc->flags & ATA_QCFLAG_DMAMAP) ||

Actions: View | Diff

Attachments on bug 351451: 237981 | 242451 | 242611 | 246361 | 247451 | 254191 | 255811 | 257561 | 259141 | 263811 | 264021 | 265241 | 265521 | 265601 | 293360 | 293601