Attachment 247361 Details for Bug 365331 – dmesg

dmesg

dmesg.txt (text/plain), 17.87 KB, created by Michael Seney on 2007-11-03 18:24:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michael Seney

Created: 2007-11-03 18:24:59 UTC

Size: 17.87 KB

patch

obsolete

>Linux version 2.6.23.1-42.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Oct 30 13:55:12 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
> BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
> BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 262064) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262064
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   262064
>On node 0 totalpages: 262064
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 255 pages used for memmap
>  HighMem zone: 32433 pages, LIFO batch:7
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000
>swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 260017
>Kernel command line: ro root=LABEL=/ rhgb quiet acpi=off
>Found and enabled local APIC!
>mapped APIC to ffffb000 (fee00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 3001.015 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1031056k/1048256k available (2183k kernel code, 16380k reserved, 1117k data, 280k init, 130752k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc0621f7d - 0xc0739544   (1117 kB)
>      .text : 0xc0400000 - 0xc0621f7d   (2183 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>Calibrating delay using timer specific routine.. 6003.90 BogoMIPS (lpj=3001952)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b180 0000441d 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
>SMP motherboard not detected.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 12:34:46  Date: 11/03/07
>NET: Registered protocol family 16
>ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread F7C02000 could not acquire Mutex [1] [20070126]
>No dock devices found.
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>PCI: Using IRQ router SIS [1039/0964] at 0000:00:02.0
>PCI: setting IRQ 11 as level-triggered
>PCI: Found IRQ 11 for device 0000:00:02.5
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: faa00000-feafffff
>  PREFETCH window: cff00000-efefffff
>NET: Registered protocol family 2
>Time: tsc clocksource has been installed.
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2905k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>audit: initializing netlink socket (disabled)
>audit(1194093285.440:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 230FF4508E76ABC1
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected SiS chipset - id:1621
>agpgart: AGP aperture is 128M @ 0xf0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 15:555:581
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 849k
>PCI: setting IRQ 5 as level-triggered
>PCI: Found IRQ 5 for device 0000:00:03.3
>ehci_hcd 0000:00:03.3: EHCI Host Controller
>ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
>PCI: cache line size of 128 is not supported by device 0000:00:03.3
>ehci_hcd 0000:00:03.3: irq 5, io mem 0xfebff000
>ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>PCI: setting IRQ 4 as level-triggered
>PCI: Found IRQ 4 for device 0000:00:03.0
>ohci_hcd 0000:00:03.0: OHCI Host Controller
>ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:03.0: irq 4, io mem 0xfebfc000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>PCI: setting IRQ 7 as level-triggered
>PCI: Found IRQ 7 for device 0000:00:03.1
>ohci_hcd 0000:00:03.1: OHCI Host Controller
>ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:03.1: irq 7, io mem 0xfebfd000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>PCI: setting IRQ 3 as level-triggered
>PCI: Found IRQ 3 for device 0000:00:03.2
>ohci_hcd 0000:00:03.2: OHCI Host Controller
>ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:03.2: irq 3, io mem 0xfebfe000
>usb 1-2: new high speed USB device using ehci_hcd and address 3
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>USB Universal Host Controller Interface driver v3.0
>usb 1-2: configuration #1 chosen from 1 choice
>SCSI subsystem initialized
>libata version 2.21 loaded.
>pata_sis 0000:00:02.5: version 0.5.2
>scsi0 : pata_sis
>scsi1 : pata_sis
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
>ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
>ata1.00: 160086528 sectors, multi 16: LBA 
>ata1.00: configured for UDMA/133
>ata2.00: ATAPI: _NEC DVD_RW ND-3550A, 1.06, max UDMA/33
>usb 2-1: new low speed USB device using ohci_hcd and address 2
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            _NEC     DVD_RW ND-3550A  1.06 PQ: 0 ANSI: 5
>usb 2-1: configuration #1 chosen from 1 choice
>input: THRUSTMASTER Top Gun Fox 2  Pro  as /class/input/input1
>input: USB HID v1.10 Joystick [THRUSTMASTER Top Gun Fox 2  Pro ] on usb-0000:00:03.0-1
>usb 2-2: new low speed USB device using ohci_hcd and address 3
>usb 2-2: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft® Digital Media Pro Keyboard as /class/input/input2
>input: USB HID v1.11 Keyboard [Microsoft Microsoft® Digital Media Pro Keyboard] on usb-0000:00:03.0-2
>input: Microsoft Microsoft® Digital Media Pro Keyboard as /class/input/input3
>input: USB HID v1.11 Device [Microsoft Microsoft® Digital Media Pro Keyboard] on usb-0000:00:03.0-2
>usb 4-1: new low speed USB device using ohci_hcd and address 2
>usb 4-1: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input4
>input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:03.2-1
>sata_sis 0000:00:05.0: version 1.0
>PCI: setting IRQ 10 as level-triggered
>PCI: Found IRQ 10 for device 0000:00:05.0
>sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
>scsi2 : sata_sis
>scsi3 : sata_sis
>ata3: SATA max UDMA/133 cmd 0x0001eff0 ctl 0x0001efe6 bmdma 0x0001ef90 irq 10
>ata4: SATA max UDMA/133 cmd 0x0001efa8 ctl 0x0001efe2 bmdma 0x0001ef98 irq 10
>ata3: COMRESET failed (errno=768)
>ata3: reset failed (errno=768), retrying in 10 secs
>ata3: COMRESET failed (errno=768)
>ata3: reset failed (errno=768), retrying in 10 secs
>ata3: COMRESET failed (errno=768)
>ata3: reset failed (errno=768), retrying in 35 secs
>ata3: limiting SATA link speed to 1.5 Gbps
>ata3: COMRESET failed (errno=768)
>ata3: reset failed, giving up
>ata4: COMRESET failed (errno=768)
>ata4: reset failed (errno=768), retrying in 10 secs
>ata4: COMRESET failed (errno=768)
>ata4: reset failed (errno=768), retrying in 10 secs
>ata4: COMRESET failed (errno=768)
>ata4: reset failed (errno=768), retrying in 35 secs
>ata4: limiting SATA link speed to 1.5 Gbps
>ata4: COMRESET failed (errno=768)
>ata4: reset failed, giving up
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1194093403.262:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  8 users, 11 roles, 2317 types, 112 bools, 1 sens, 1024 cats
>security:  67 classes, 207815 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1194093403.628:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sis900.c: v1.08.10 Apr. 2 2006
>PCI: Found IRQ 10 for device 0000:00:04.0
>PCI: Sharing IRQ 10 with 0000:00:0b.0
>0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
>0000:00:04.0: Using transceiver found at address 1 as default
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>eth0: SiS 900 PCI Fast Ethernet at 0xe800, IRQ 10, 00:17:31:7a:0d:9b.
>PCI: Found IRQ 5 for device 0000:00:0a.0
>snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>usb-storage: device scan complete
>scsi 4:0:0:0: Direct-Access     Maxtor   3200             0341 PQ: 0 ANSI: 4
>sd 4:0:0:0: [sdb] 398297088 512-byte hardware sectors (203928 MB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 17 00 00 00
>sd 4:0:0:0: [sdb] Assuming drive cache: write through
>sd 4:0:0:0: [sdb] 398297088 512-byte hardware sectors (203928 MB)
>sd 4:0:0:0: [sdb] Write Protect is off
>sd 4:0:0:0: [sdb] Mode Sense: 17 00 00 00
>sd 4:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 4:0:0:0: [sdb] Attached SCSI disk
>sd 4:0:0:0: Attached scsi generic sg2 type 0
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>loop: module loaded
>EXT3 FS on sda1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda6, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2048248k swap on /dev/sda5.  Priority:-1 extents:1 across:2048248k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>eth0: Media Link On 100mbps full-duplex 
>audit(1194107827.981:4): audit_pid=1485 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>eth0: no IPv6 routers present
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb1, type ext3), uses xattr

Actions: View

Attachments on bug 365331: 247361