Attachment 247831 Details for Bug 366511 – dmesg

dmesg

kernel-2.6.23.1-42.fc8-dvb-usb-bulk.txt (text/plain), 30.79 KB, created by sangu on 2007-11-05 09:37:21 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: sangu

Created: 2007-11-05 09:37:21 UTC

Size: 30.79 KB

patch

obsolete

>Linux version 2.6.23.1-42.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Oct 30 13:55:12 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
> BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
> BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
> BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f3900
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 524000) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524000
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   524000
>On node 0 totalpages: 524000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2301 pages used for memmap
>  HighMem zone: 292323 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP 000F7810, 0014 (r0 Nvidia)
>ACPI: RSDT 7FEE3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 7FEE30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 7FEE3180, 6786 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 7FEE0000, 0040
>ACPI: SSDT 7FEE9A40, 0188 (r1 PTLTD  POWERNOW        1  LTP        1)
>ACPI: MCFG 7FEE9C40, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC 7FEE9980, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:11 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:11 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
>swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 519907
>Kernel command line: ro root=LABEL=/ rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2009.251 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2070148k/2096000k available (2183k kernel code, 24632k reserved, 1117k data, 280k init, 1178496k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc0621f7d - 0xc0739544   (1117 kB)
>      .text : 0xc0400000 - 0xc0621f7d   (2183 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 4019.81 BogoMIPS (lpj=2009909)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0(2) -> Core 0
>CPU: After all inits, caps: 178bf3ff e3d3fbff 00000000 00000410 00000001 00000000 00000003 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07a9000 soft=c0789000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4017.95 BogoMIPS (lpj=2008975)
>CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1(2) -> Core 1
>CPU: After all inits, caps: 178bf3ff e3d3fbff 00000000 00000410 00000001 00000000 00000003 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01
>Total of 2 processors activated (8037.76 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 18:13:48  Date: 11/05/07
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xfa880, last bus=5
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:09.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 10 11)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 *10 11)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 10 11)
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 *7 10 11)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 *4 5 7 10 11)
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 10 11)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 10 *11)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 *10 11)
>ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 10 *11)
>ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
>ACPI: Power Resource [PFAN] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: ioport range 0x1000-0x107f has been reserved
>pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:01: ioport range 0x1400-0x147f has been reserved
>pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
>pnp: 00:01: ioport range 0x1800-0x187f has been reserved
>pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
>pnp: 00:08: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:09: iomem range 0xcf000-0xcffff has been reserved
>pnp: 00:09: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:09: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:09: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:09.0
>  IO window: a000-afff
>  MEM window: fde00000-fdefffff
>  PREFETCH window: fdf00000-fdffffff
>PCI: Bridge: 0000:00:0b.0
>  IO window: 9000-9fff
>  MEM window: fdd00000-fddfffff
>  PREFETCH window: fdc00000-fdcfffff
>PCI: Bridge: 0000:00:0c.0
>  IO window: 8000-8fff
>  MEM window: fdb00000-fdbfffff
>  PREFETCH window: fda00000-fdafffff
>PCI: Bridge: 0000:00:0d.0
>  IO window: 7000-7fff
>  MEM window: fd900000-fd9fffff
>  PREFETCH window: fd800000-fd8fffff
>PCI: Bridge: 0000:00:0e.0
>  IO window: 6000-6fff
>  MEM window: fa000000-fcffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>NET: Registered protocol family 2
>Time: acpi_pm clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2909k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1194286428.642:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 230FF4508E76ABC1
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Found disabled HT MSI Mapping on 0000:00:0b.0
>PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>PCI: Found disabled HT MSI Mapping on 0000:00:0c.0
>PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
>PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
>PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>Boot video device is 0000:05:00.0
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0b.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0c.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0d.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0e.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Transitioning device [FAN] to D3
>ACPI: Transitioning device [FAN] to D3
>ACPI: Fan [FAN] (off)
>ACPI: Invalid passive threshold
>ACPI: Thermal Zone [THRM] (36 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.00.00)
>powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x8
>powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xa
>powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
>Using IPI No-Shortcut mode
>  Magic number: 15:482:240
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 849k
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.1
>ehci_hcd 0000:00:02.1: irq 16, io mem 0xfeb00000
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: irq 17, io mem 0xfe02f000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>libata version 2.21 loaded.
>sata_nv 0000:00:07.0: version 3.5
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 18
>sata_nv 0000:00:07.0: Using ADMA mode
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0xf883c480 ctl 0xf883c4a0 bmdma 0x0001cc00 irq 18
>ata2: SATA max UDMA/133 cmd 0xf883c580 ctl 0xf883c5a0 bmdma 0x0001cc08 irq 18
>usb 1-7: new high speed USB device using ehci_hcd and address 4
>usb 1-7: configuration #1 chosen from 1 choice
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: WDC WD1600JS-22NCB1, 10.02E02, max UDMA/133
>ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>usb 2-1: new low speed USB device using ohci_hcd and address 2
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-22N 10.0 PQ: 0 ANSI: 5
>ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 19
>sata_nv 0000:00:08.0: Using ADMA mode
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0xf8882480 ctl 0xf88824a0 bmdma 0x0001b800 irq 19
>ata4: SATA max UDMA/133 cmd 0xf8882580 ctl 0xf88825a0 bmdma 0x0001b808 irq 19
>usb 2-1: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft Wireless Optical Mouse® 1.0A as /class/input/input1
>input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:02.0-1
>ata3: SATA link down (SStatus 0 SControl 300)
>usb 2-3: new low speed USB device using ohci_hcd and address 3
>usb 2-3: configuration #1 chosen from 1 choice
>input: Microsoft Natural® Ergonomic Keyboard 4000 as /class/input/input2
>input: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:02.0-3
>input: Microsoft Natural® Ergonomic Keyboard 4000 as /class/input/input3
>input: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:02.0-3
>ata4: SATA link down (SStatus 0 SControl 300)
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1194286440.967:2): selinux=0 auid=4294967295
>FDC 0 is a post-1991 82077
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>forcedeth: using HIGHDMA
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>dvb-usb: found a 'DViCO FusionHDTV5 USB Gold' in warm state.
>eth0: forcedeth.c: subsystem: 0147b:1c1b bound to 0000:00:0a.0
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
>pata_amd 0000:00:06.0: version 0.3.9
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>scsi4 : pata_amd
>scsi5 : pata_amd
>ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001e000 irq 14
>ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001e008 irq 15
>nvidia: module license 'NVIDIA' taints kernel.
>ata6.00: ATAPI: BENQ    DVD DD DW1620, B7T9, max UDMA/33
>ata6.00: configured for UDMA/33
>ata6: EH pending after completion, repeating EH (cnt=4)
>scsi 5:0:0:0: CD-ROM            BENQ     DVD DD DW1620    B7T9 PQ: 0 ANSI: 5
>scsi 5:0:0:0: Attached scsi generic sg1 type 5
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 20
>firewire_ohci: Added fw-ohci device 0000:01:06.0, OHCI version 1.10
>ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 20
>ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
>gameport: EMU10K1 is pci0000:01:0a.1/gameport0, io 0xa800, speed 59659kHz
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 5:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>intel8x0_measure_ac97_clock: measured 50720 usecs
>intel8x0: clocking to 46818
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>dvb-usb: bulk message failed: -110 (2/0)
>dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
>DVB: registering new adapter (DViCO FusionHDTV5 USB Gold)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (5/0)
>DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
>dvb-usb: bulk message failed: -110 (4/0)
>input: IR-receiver inside an USB DVB receiver as /class/input/input6
>dvb-usb: schedule remote query interval to 100 msecs.
>dvb-usb: DViCO FusionHDTV5 USB Gold successfully initialized and connected.
>usbcore: registered new interface driver dvb_usb_cxusb
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>dvb-usb: bulk message failed: -110 (1/0)
>EXT3 FS on sda9, internal journal
>Adding 1028120k swap on /dev/sda8.  Priority:-1 extents:1 across:1028120k
>dvb-usb: bulk message failed: -110 (1/0)
>Loading iSCSI transport class v2.0-724.
>iscsi: registered transport (tcp)
>iscsi: registered transport (iser)
>Clocksource tsc unstable (delta = -104934668 ns)
>dvb-usb: bulk message failed: -110 (1/0)
>audit(1194254071.325:3): audit_pid=1844 old=0 by auid=4294967295
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>eth0: no IPv6 routers present
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -110 (1/0)
>dvb-usb: bulk message failed: -71 (1/0)

Actions: View

Attachments on bug 366511: 247831