Attachment 251191 Details for Bug 369931 – dmesg output

dmesg output

dmesg.txt (text/plain), 22.75 KB, created by Eduardo Villagrán Morales on 2007-11-08 04:02:19 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Eduardo Villagrán Morales

Created: 2007-11-08 04:02:19 UTC

Size: 22.75 KB

patch

obsolete

>Linux version 2.6.23.1-42.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Tue Oct 30 13:55:12 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003bf10000 (usable)
> BIOS-e820: 000000003bf10000 - 000000003bf17000 (ACPI data)
> BIOS-e820: 000000003bf17000 - 000000003bf80000 (ACPI NVS)
> BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>63MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f8770
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 245520) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   245520
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   245520
>On node 0 totalpages: 245520
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 126 pages used for memmap
>  HighMem zone: 16018 pages, LIFO batch:3
>  Movable zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F87A0, 0024 (r3 HPQOEM)
>ACPI: XSDT 3BF1008B, 005C (r1 HPQOEM SLIC-MPC  6040000  LTP        0)
>ACPI: FACP 3BF16B00, 00F4 (r3 HPQOEM SLIC-MPC  6040000 PTL     F4240)
>ACPI: DSDT 3BF100E7, 6A19 (r1 HPQOEM SLIC-MPC  6040000 MSFT  100000E)
>ACPI: FACS 3BF17FC0, 0040
>ACPI: SLIC 3BF16C68, 0176 (r1 HPQOEM SLIC-MPC  6040000 HPQ         1)
>ACPI: MCFG 3BF16DDE, 003C (r1 HPQOEM SLIC-MPC  6040000  LTP        0)
>ACPI: HPET 3BF16E1A, 0038 (r1 HPQOEM SLIC-MPC  6040000  LTP        1)
>ACPI: APIC 3BF16E52, 0050 (r1 HPQOEM SLIC-MPC  6040000  LTP        0)
>ACPI: BOOT 3BF16EA2, 0028 (r1 HPQOEM SLIC-MPC  6040000  LTP        1)
>ACPI: SSDT 3BF16ECA, 0136 (r1 HPQOEM SLIC-MPC  6040000  LTP        1)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:12 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x10de8201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
>swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
>swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000
>Built 1 zonelists in Zone order.  Total pages: 243602
>Kernel command line: ro root=LABEL=/12 rhgb quiet
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07a8000 soft=c0788000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2210.082 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 965480k/982080k available (2183k kernel code, 15868k reserved, 1117k data, 280k init, 64576k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073f000 - 0xc0785000   ( 280 kB)
>      .data : 0xc0621f7d - 0xc0739544   (1117 kB)
>      .text : 0xc0400000 - 0xc0621f7d   (2183 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4422.97 BogoMIPS (lpj=2211489)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001d 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: After all inits, caps: 078bf3ff ebd3fbff 00000000 00000410 00002001 00000000 0000001d 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: AMD Turion(tm) 64  stepping 02
>Total of 1 processors activated (4422.97 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=1552 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  0:27:46  Date: 11/08/07
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS BUG #81[00000000] found
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: System BIOS is requesting _OSI(Linux)
>ACPI: If "acpi_osi=Linux" works better,
>Please send dmidecode to linux-acpi@vger.kernel.org
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:10.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 22 23) *10
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LK1E] (IRQs 20) *0, disabled.
>ACPI: PCI Interrupt Link [LK2E] (IRQs 19) *11
>ACPI: PCI Interrupt Link [LK3E] (IRQs 21) *10
>ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 22 23) *10
>ACPI: PCI Interrupt Link [LSMU] (IRQs 16 17 18 22 23) *11
>ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 22 23) *11
>ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 22 23) *7
>ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 22 23) *11
>ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 22 23) *5
>ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 22 23) *0
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
>hpet0: 3 32-bit timers, 25000000 Hz
>Time: tsc clocksource has been installed.
>pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:02: ioport range 0x1000-0x107f has been reserved
>pnp: 00:02: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:02: ioport range 0x1400-0x147f has been reserved
>pnp: 00:02: ioport range 0x1480-0x14ff has been reserved
>pnp: 00:02: ioport range 0x1800-0x187f has been reserved
>pnp: 00:02: ioport range 0x1880-0x18ff has been reserved
>pnp: 00:02: ioport range 0x2000-0x203f has been reserved
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: b3000000-b30fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: 4000-4fff
>  MEM window: b4000000-b7ffffff
>  PREFETCH window: d0000000-d01fffff
>PCI: Bridge: 0000:00:10.0
>  IO window: disabled.
>  MEM window: b8000000-b80fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2908k freed
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1194481666.454:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 230FF4508E76ABC1
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:05.0
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI Exception (processor_core-0819): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI: Thermal Zone [TZS0] (57 C)
>ACPI: Thermal Zone [TZS1] (60 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Turion(tm) 64  processors (1 cpu cores) (version 2.00.00)
>powernow-k8:    0 : fid 0xe (2200 MHz), vid 0xb
>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xd
>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xf
>powernow-k8:    3 : fid 0x8 (1600 MHz), vid 0x11
>powernow-k8:    4 : fid 0x0 (800 MHz), vid 0x18
>Using IPI No-Shortcut mode
>  Magic number: 15:552:455
>Freeing unused kernel memory: 280k freed
>Write protecting the kernel read-only data: 849k
>Marking TSC unstable due to: TSC halts in idle.
>Time: hpet clocksource has been installed.
>ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 23 (level, high) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:0b.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:0b.1
>ehci_hcd 0000:00:0b.1: irq 16, io mem 0xb0005000
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 22 (level, high) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:0b.0: irq 17, io mem 0xb0004000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>USB Universal Host Controller Interface driver v3.0
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
>SCSI subsystem initialized
>libata version 2.21 loaded.
>sata_nv 0000:00:0e.0: version 3.5
>PCI: Enabling device 0000:00:0e.0 (0005 -> 0007)
>ACPI: PCI Interrupt Link [LTID] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 18 (level, high) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0x000130b0 ctl 0x000130a6 bmdma 0x00013090 irq 18
>ata2: SATA max UDMA/133 cmd 0x000130a8 ctl 0x000130a2 bmdma 0x00013098 irq 18
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: ST9120822AS, 3.BHD, max UDMA/100
>ata1.00: 234441648 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      ST9120822AS      3.BH PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1194481671.871:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  5 users, 11 roles, 2315 types, 112 bools, 1 sens, 1024 cats
>security:  67 classes, 207812 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1194481672.250:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LK2E] -> GSI 19 (level, high) -> IRQ 19
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>ssb: rev 60000000
>WARNING: at drivers/ssb/main.c:889 ssb_tmslow_reject_bitmask() (Not tainted)
> [<f88e780d>] ssb_tmslow_reject_bitmask+0x78/0x84 [ssb]
> [<f88e7f12>] ssb_device_is_enabled+0x9/0x2d [ssb]
> [<f88e9ddd>] ssb_pcicore_init+0x11/0x35 [ssb]
> [<f88e75bc>] ssb_attach_queued_buses+0x6c/0x245 [ssb]
> [<f88e91b3>] ssb_pci_xtal+0x1d5/0x1f2 [ssb]
> [<f88e8d51>] ssb_pci_get_invariants+0x297/0x2a1 [ssb]
> [<f88e7af8>] ssb_bus_register+0x11a/0x163 [ssb]
> [<f88e8aba>] ssb_pci_get_invariants+0x0/0x2a1 [ssb]
> [<f88e7be2>] ssb_bus_pcibus_register+0x24/0x47 [ssb]
> [<c04fe65b>] pci_set_master+0x54/0x58
> [<f88e92dc>] ssb_pcihost_probe+0x61/0x8d [ssb]
> [<c05001af>] pci_device_probe+0x36/0x57
> [<c0566d83>] driver_probe_device+0xea/0x168
> [<c04f3345>] kobject_uevent_env+0x37a/0x3a1
> [<c0566ea7>] __driver_attach+0x0/0xa5
> [<c0566f17>] __driver_attach+0x70/0xa5
> [<c056630f>] bus_for_each_dev+0x39/0x5b
> [<c0566bde>] driver_attach+0x16/0x18
> [<c0566ea7>] __driver_attach+0x0/0xa5
> [<c05665f3>] bus_add_driver+0x6d/0x16d
> [<c05002de>] __pci_register_driver+0x48/0x74
> [<f8847040>] ssb_modinit+0x40/0x56 [ssb]
> [<c0437d0f>] blocking_notifier_call_chain+0x17/0x1a
> [<c044ab5a>] sys_init_module+0x150d/0x1651
> [<c06202da>] do_page_fault+0x2c0/0x5ef
> [<c0566768>] bus_register+0x0/0x1f7
> [<c040518a>] syscall_call+0x7/0xb
> =======================
>ssb: Sonics Silicon Backplane found on PCI device 0000:01:00.0
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input4
>ACPI: Sleep Button (CM) [SLPB]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>pata_amd 0000:00:0d.0: version 0.3.9
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>scsi2 : pata_amd
>scsi3 : pata_amd
>ata3: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00013080 irq 14
>ata4: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00013088 irq 15
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>input: Video Bus as /class/input/input6
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>ACPI: AC Adapter [ADP1] (off-line)
>ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NC08, max MWDMA2
>ACPI: Battery Slot [BAT0] (battery present)
>ata4.00: configured for MWDMA2
>scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20L  NC08 PQ: 0 ANSI: 5
>scsi 3:0:0:0: Attached scsi generic sg1 type 5
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 17
>ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 17 (level, high) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:14.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 0103c:30b5 bound to 0000:00:14.0
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:05:09.1 [1180:0822] (rev 19)
>ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:05:09.1[B] -> Link [LNK2] -> GSI 16 (level, high) -> IRQ 21
>mmc0: SDHCI at 0xb8000800 irq 21 DMA
>net eth1: device_rename: sysfs_create_symlink failed (-17)
>udev: renamed network interface eth0 to eth1
>ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:05:09.0[A] -> Link [LNK1] -> GSI 23 (level, high) -> IRQ 16
>firewire_ohci: Added fw-ohci device 0000:05:09.0, OHCI version 1.10
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 22 (level, high) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:10.1 to 64
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LK3E] -> GSI 21 (level, high) -> IRQ 22
>EXT3 FS on sda2, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2048248k swap on /dev/sda6.  Priority:-1 extents:1 across:2048248k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (15360 buckets, 61440 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>audit(1194492488.008:4): audit_pid=1501 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>Clocksource tsc unstable (delta = -136365009 ns)
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>eth1: no link during initialization.
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.

Actions: View

Attachments on bug 369931: 251161 | 251171 | 251191