Attachment 251741 Details for Bug 356881 – dmesg-2.6.23.1-21-after-suspend-NoGood

dmesg-2.6.23.1-21-after-suspend-NoGood

dmesg-2.6.23.1-21-after-suspend-NoGood (text/plain), 23.38 KB, created by Dieter Kasper on 2007-11-08 16:18:05 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dieter Kasper

Created: 2007-11-08 16:18:05 UTC

Size: 23.38 KB

patch

obsolete

>Linux version 2.6.23.1-21.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-27)) #1 SMP Thu Nov 1 20:28:15 EDT 2007
>Command line: ro root=LABEL=/ rhgb mce=2
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f650000 (usable)
> BIOS-e820: 000000007f650000 - 000000007f667000 (ACPI data)
> BIOS-e820: 000000007f667000 - 000000007f700000 (ACPI NVS)
> BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 521808) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP 000F5AB0, 0014 (r0 FUJ   )
>ACPI: RSDT 7F65ECBF, 0048 (r1 FSC    PC        1220000 FUJ       100)
>ACPI: FACP 7F666F8C, 0074 (r1 FSC    PC        1220000 FUJ       100)
>ACPI: DSDT 7F65ED17, 6FB5 (r1 FUJ    FJNB1AF   1220000 MSFT  100000E)
>ACPI: FACS 7F667FC0, 0040
>ACPI: SSDT 7F665CCC, 0265 (r1 FUJ    FJNB1AF   1220000 MSFT  100000E)
>ACPI: MCFG 7F665F31, 003C (r1 FUJ    FJNB1AF   1220000 FUJ       100)
>ACPI: SSDT 7F665F6D, 04DC (r1 FUJ    FJNB1AF   1220000 INTL 20050624)
>ACPI: SSDT 7F666B1D, 0231 (r1 FUJ    FJNB1AF   1220000 INTL 20050624)
>ACPI: APIC 7F666D4E, 0068 (r1 FUJ    FJNB1AF   1220000  LTP        0)
>ACPI: HPET 7F666DB6, 0038 (r1 FUJ    FJNB1AF   1220000 FUJ       100)
>ACPI: BOOT 7F666DEE, 0028 (r1 FUJ    FJNB1AF   1220000 FUJ       100)
>ACPI: SLIC 7F666E16, 0176 (r1 FSC    PC        1220000 FSC       100)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007f650000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 521808) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007f650000
>No mptable found.
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   521808
>On node 0 totalpages: 521711
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1305 pages reserved
>  DMA zone: 2638 pages, LIFO batch:0
>  DMA32 zone: 7078 pages used for memmap
>  DMA32 zone: 510634 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
>swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:78000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 41176 bytes of per cpu data
>Built 1 zonelists in Node order.  Total pages: 513272
>Policy zone: DMA32
>Kernel command line: ro root=LABEL=/ rhgb mce=2
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 1995.003 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2049600k/2087232k available (2417k kernel code, 37244k reserved, 1369k data, 324k init)
>SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 3994.08 BogoMIPS (lpj=1997042)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 10390633
>Detected 10.390 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.02 BogoMIPS (lpj=1995011)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2080 bytes
>Time: 16:47:38  Date: 11/07/07
>NET: Registered protocol family 16
>ACPI: ACPI Dock Station Driver 
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: EC: Look up EC in DSDT
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: SSDT 7F6675C3, 0893 (r1 VISTA  FJNB1AF   1220000 INTL 20050624)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
>PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
>PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
>PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
>PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
>PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
>PCI: Cannot allocate resource region 0 of device 0000:05:00.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Time: hpet clocksource has been installed.
>pnp: 00:00: iomem range 0xf8000000-0xfbffffff could not be reserved
>pnp: 00:02: iomem range 0xf8000000-0xfbffffff could not be reserved
>pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
>pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
>pnp: 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
>pnp: 00:09: iomem range 0xfed00000-0xfed003ff could not be reserved
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: f0000000-f00fffff
>  PREFETCH window: 90000000-900fffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: 90100000-901fffff
>  PREFETCH window: disabled.
>PCI: Bus 9, cardbus bridge: 0000:08:03.0
>  IO window: 00003000-000030ff
>  IO window: 00003400-000034ff
>  PREFETCH window: 88000000-8bffffff
>  MEM window: 94000000-97ffffff
>PCI: Bus 13, cardbus bridge: 0000:08:03.1
>  IO window: 00003800-000038ff
>  IO window: 00003c00-00003cff
>  PREFETCH window: 8c000000-8fffffff
>  MEM window: 98000000-9bffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 3000-3fff
>  MEM window: f0200000-f02fffff
>  PREFETCH window: 88000000-8fffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Enabling device 0000:00:1c.2 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:08:03.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Enabling device 0000:08:03.1 (0080 -> 0083)
>ACPI: PCI Interrupt 0000:08:03.1[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3072k freed
>Simple Boot Flag at 0x7b set to 0x1
>audit: initializing netlink socket (disabled)
>audit(1194454058.781:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 5BC3C10499EFB33
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:02.0
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7F666449, 01E8 (r1 FUJ    FJNB1AF   1220000 INTL 20050624)
>ACPI: SSDT 7F6668C8, 01D0 (r1 FUJ    FJNB1AF   1220000 INTL 20050624)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: SSDT 7F666841, 0087 (r1 FUJ    FJNB1AF   1220000 INTL 20050624)
>ACPI: SSDT 7F666A98, 0085 (r1 FUJ    FJNB1AF   1220000 INTL 20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Thermal Zone [TZ00] (27 C)
>ACPI: Thermal Zone [TZ01] (27 C)
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:08:03.0 [10cf:131e]
>Yenta O2: res at 0x94/0xD4: 00/ea
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#08) from #09 to #0c
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>pcmcia: parent PCI bridge Memory window: 0xf0200000 - 0xf02fffff
>pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8fffffff
>Yenta: CardBus bridge found at 0000:08:03.1 [10cf:131e]
>Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
>Socket status: 30000410
>Yenta: Raising subordinate bus# of parent bus (#08) from #0c to #10
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>pcmcia: parent PCI bridge Memory window: 0xf0200000 - 0xf02fffff
>pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8fffffff
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>  Magic number: 15:488:792
>Freeing unused kernel memory: 324k freed
>Write protecting the kernel read-only data: 1012k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>pccard: PCMCIA card inserted into slot 1
>cs: memory probe 0x88000000-0x8fffffff: excluding 0x88000000-0x8fffffff
>cs: memory probe 0xf0200000-0xf02fffff: excluding 0xf0200000-0xf020ffff
>pcmcia: registering new device pcmcia1.0
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04793/0x302000
>serio: Synaptics pass-through port at isa0060/serio4/input0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0644000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>SCSI subsystem initialized
>libata version 2.21 loaded.
>ahci 0000:00:1f.2: version 2.3
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>usb 4-2: configuration #1 chosen from 1 choice
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 cmd 0xffffc20000ade500 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2300
>ata2: SATA max UDMA/133 cmd 0xffffc20000ade580 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2300
>ata3: SATA max UDMA/133 cmd 0xffffc20000ade600 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2300
>ata4: SATA max UDMA/133 cmd 0xffffc20000ade680 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2300
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: WDC WD1200BEVS-07LAT0, 01.06M01, max UDMA/133
>ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 1)
>ata1.00: configured for UDMA/133
>ata2: SATA link down (SStatus 0 SControl 0)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 0)
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200BEVS-0 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>input: PS/2 Generic Mouse as /class/input/input3
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi4 : ata_piix
>scsi5 : ata_piix
>ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000011810 irq 14
>ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000011818 irq 15
>ata5.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.31, max UDMA/33
>ata5.00: configured for UDMA/33
>ata6: port disabled. ignoring.
>scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-841S  1.31 PQ: 0 ANSI: 5
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1194454069.851:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 4:0:0:0: Attached scsi generic sg1 type 5
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, 1.2.18
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>iTCO_vendor_support: vendor-support=0
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>sky2 0000:02:00.0: v1.18 addr 0xf0000000 irq 16 Yukon-EC Ultra (0xb4) rev 2
>sky2 eth0: addr 00:17:42:31:80:18
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0d
>ipw3945: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>ACPI: Battery Slot [CMB1] (battery present)
>ACPI: Battery Slot [CMB2] (battery absent)
>intel_rng: FWH not detected
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input7
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: AC Adapter [AC] (off-line)
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17kds
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:08:03.4[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 23
>input: Video Bus as /class/input/input8
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>firewire_ohci: Added fw-ohci device 0000:08:03.4, OHCI version 1.10
>sdhci: SDHCI controller found at 0000:08:03.2 [1217:7120] (rev 1)
>ACPI: PCI Interrupt 0000:08:03.2[A] -> GSI 16 (level, low) -> IRQ 16
>sdhci:slot0: Unknown controller version (16). You may experience problems.
>mmc0: SDHCI at 0xf0202800 irq 16 PIO
>found SMC SuperIO Chip (devid=0x7a rev=00 base=0x002e): LPC47N227
>smsc_superio_flat(): fir: 0x6e8, sir: 0x2e8, dma: 03, irq: 3, mode: 0x0e
>smsc_ircc_present: can't get sir_base of 0x2e8
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>si3054: cannot initialize. EXT MID = 0000
>firewire_core: created new fw device fw0 (0 config rom retries, S400)
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>floppy0: no floppy controllers found
>ACPI: \_SB_.PCI0.PATA.PRIM.MAST: found ejectable bay
>ACPI: \_SB_.PCI0.PATA.PRIM.MAST: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.PATA.PRIM.MAST] Added
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda2, internal journal
>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>XFS mounting filesystem sda5
>Ending clean XFS mount for filesystem: sda5
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2562356k swap on /dev/sda3.  Priority:-1 extents:1 across:2562356k

Actions: View

Attachments on bug 356881: 249871 | 249891 | 249901 | 249911 | 249921 | 251741